FPGA - try to use the screw of the replication of RIO to replace going to reset the FPGA running

Running LabVIEW 12.1

We have an application that uses an FPGA that was compiled in Run to Reset (works on any reset or power on).  Sometimes we need to update the image on the RT and FPGA and I downloaded the NI RIO replication screw.

The problem I have now is that when I got to download the bitfile on the Flash FPGA on the sbRIO9636, I get the following error:


Possible reasons:

LabVIEW FPGA: The operation could not be performed because the FPGA is busy. Stop all activity on the FPGA before asking this operation. If the target is in the Interface of Scan program mode, put in FPGA Interface programming mode.

My updater is stand alone EXE.  He isn't able to get a link to the FPGA, because we are not sure what Bitfile currently is on a particular system.  I tried using the open FPGA reference and load a VACUUM on the FPGA bitfile by setting the FPGA to RUN when he sound the FPGA VI of the Open reference - and it works for me to erase the bitfile.  It does not allow me to immediately after run the bitfile VI of replication of RIO download - even if I close and reset the FPGA before trying to download the Bitfile for the RIO Flash.

I have to first delete the existing bitfile, then load a new?

Well, I found what I consider as a workaround - but maybe it's required to do things - but it doesn't seem like it should be, since the RIO device Setup.exe is able to flash or clear the bitfile regardless of the State of the FPGA.

What I've done is to define the FPGA to "do not load automatically on re" then call the RT Config screw system and order a restart of the system.  The RT operating system restarts and then restarts the RIO system and this ensures that the FPGA is not busy.  Then I'm able to erase them or write about a new bitfile for the RIO Flash and set the "Automatic loading on any Reset" Rio de JANEIRO and restart the system again.

Our current situation, it will work.  Long time restarts do a bit of headache.

Tags: NI Software

Similar Questions

  • Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

      I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

      Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

      OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K


    Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
    First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
    NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

    Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

    Secondly, I suggest that you run the File Checker system while in the same clean boot state.
    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the field search programs and files .
    2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
      If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:

    When the analysis is complete, test to see if the problems facing the system have been resolved.

    If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

    Expert MowGreen Windows IT Pro - consumer safety

  • Firefox does not open, and when I try to use the "run", it says that the file has been moved, etc. I use Windows 8 and I can't lose my favorites. Help?

    Firefox has been great to work on my computer for months and then suddenly he could not load pages. So, naturally, I restarted my computer, but when it restarted Firefox does not open. The icon lights for a bit as usual, then it fades and never actually opens. When I try to use the "run" command, I get this error:
    "C:\Program Files\Mozilla Firefox\ refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »
    I also tried the same thing for the file in the x 86 folder, but it gave the same error and I went and looked for the files in the given location and they were there.
    Firefox is not to fall down, so he isn't there an other error message, I can give you.
    The things that I had my favorites are really important, I can not lose those, but I am fine with anything else have to re-installed, etc..
    Help please?

    I've never tried it myself, but the forum has a series of measures for a "clean reinstall" Firefox. Even if you do not delete the record of your personal settings (AKA profile) during this process, a backup of this folder is always a good idea in case something goes wrong.

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

  • Qosmio F20-155: colors wrong when I try to use the S-video connection

    When I try to use the S-video, the photo shows with wrong colors or color of Pentecost. Do I need some kind of driver?

    Sometimes the photo looks like it (press the link to see)

    Please give little assistance...

    Thank you for your time



    Just a question: you´re talk about the video-in and video output on your laptop, not an expansion or a USB-video output or something else card?
    A machine you have respectively which model do do you have?


  • HP 1287c Windows 7: windows 7, try to use the model of hp 1287c hp 5302 keyboard does not

    have a hp 1287c windows 7 tries to use the model of hp 5302 keyboard does not respond

    try to use the old Hp keyboard model 5302 was for windows 2000 did not know if could use when I plug computor does not recognize he wonding if possible to work?



    Well, the keyboard is now very cheap, the converter may not work correctly. After 16 years of him please give a rest.

    Kind regards.

  • Error 91 - try to use the variant of the function of data

    I'm running a problem when you try to use variations in my application. I have a setup of State machine that a State creates a list of tasks (cluster of tables), and then converts it to the Variant. The variant is fed into a shift register that allows me to access the list of tasks of a different State.

    The problem comes when I try to use the variant of the function Data. I right click on the task cluster to create a constant and then wire to the TYPE of the variant of the function Data. I wire the variant of cluster of task to the terminal of the VARIANT. When I run the VI, I get error 91: or the possible reasons: LabVIEW: the variant data type is not compatible with the data type of wired for the input type. ».

    How can I get this error if the type that I have connected to a Terminal TYPE of the Variant Data terminal is a constant created from the exact type created a variant of?

    Section of the machine of the State where I wire the cluster variant:

    Section of the machine of the State where I use the data out of the cluster variant:

    The constant wire to the terminal of data TYPE variant was created from the cluster that is connected to the Variant type data. I don't understand how there is a type mismatch?

    Is there another State between these two?  I notice you have some tunnels 'Use default if unwired' coming out of the structure of your business.  First of all, clear on the tunnels.  Second, in cases where you do not only affect the data, the data directly from the tunnel entrance in the tunnel exit of the wire.  I recommend using the tunnels linked to make it even easier on yourself.

    With the default tunnels being output, your variant coming could really be empty, so the conversion fails.

  • Arrow keys on the keyboard. Try to use the keyboard and mouse.

    New Gateway laptop with windows 7. I play a lot of games online and I can't find anywhere how to change this, or if it's the phone or the operating system. When I try to play a game on IE with the arrows that they automatically stick causing the game almost impossible to play, also when you try to use the keyboard and the touchpad the touchpad locks when the keyboard is in use. Help, please.

    It is a known problem if all goes well with Flash and Internet Explorer.
    Source: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/d006871e-4701-4e80-9062-197f28251ac5/

    The only thing you can do is use another browser until what Adobe fixes the problem.

  • When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

    When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

    I'm not that computer literate and do not understand what needs to be fixed.

    This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

    I use ESET Antivirus Node32 software.


    1. What is the error message or an exact error code?

    2 have you made changes on the computer before this problem?

    3. you try to check the updates?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Reset Windows Update components and then try to download the updates.

    How to reset the Windows Update components?


    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756


    Method 2:

    File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):


    Please respond with more information so that we could help you more.

  • How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

    How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

    Hello, welcome.

    The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
    For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
    For both machines, I recommend you to prepare for the transfer using the following procedure:
    1. click on START > run
    2 type "msconfig" (without the quotes) and press enter
    3. go to the "Startup" tab and uncheck all the entries displayed
    4. click on 'Apply' at the bottom right
    5. click on START > run
    6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
    7. type chkdsk /r and press enter
    8 allow the system to attempt disassembly of the volume
    9. allow the system to plan restarting
    10. restart your computer
    11 let checkdisk analyze the file system on your hard drive
    12. Once completed, perform the same steps on the other machine
    13. Once completed, repeat the transfer

    Let us know what happens
    Thank you!

    Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Try to use the Windows Update Web site

    I try to use the microsoft update Web site.  Whenever I try to start the update process I get a message asking me to please change your Internet Explorer security settings / persistence under Userdata, select Enable.

    When I check, the option is already set that way.  I am running Windows XP.  Can someone help me get the Microsoft update Web site to check that the setting is correct?


    Description of the problem

    This error appears when you attempt to save advanced settings on the site to update with Internet Explorer Userdata persistence disabled.

    Applicable operating systems
    • Windows 2000
    • Windows XP
    • Windows Server 2003
    1. make sure that the Local Administrator account and the Service are added to the security policy 'impersonate a client after authentication ".

    1. Click Start.
    2. Point to programs.
    3. Point to Administrative Tools.
    4. Choose local security policy.
    5. Expand local policies.
    6. Select the user rights assignment.
    7. Double-click to open the impersonate a client after authentication.
    8. On the local security setting tab, add the Service and the administrator of the list of users and groups.
    9. Click OK.
    10. Restart the system.

    2. enable the Userdata persistence in Internet Explorer

    1. Start Internet Explorer.
    2. On the Tools menu, click Internet Options.
    3. Select the Security tab.
    4. Select the Internet Web zone icon.
    5. To adjust the security level, click custom level.
    6. Under Miscellaneous enable the Userdata persistence.
    7. Opens the dialog box are you sure you want to change the security settings for this zone .
    8. Click Yes.
    9. Click OK.
    10. Try Windows Update again.
  • When I try to use the send to compressed (zipped) folder option I get an access denied message

    When I try to use the send to compressed (zipped) folder option when I right click on a file I get the following message

    Unable to complete the operation.

    Access is denied.

    However I do have permisions complete on the file and I am the only user and administrator

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

    If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

    If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

    If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

    Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

    Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  This can sometimes solve the problem on its own.

    While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

    If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

    I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

    Good luck! Lorien - a - MCSE/MCSA/network + / A +.

  • When I try to use the parental controls, I tells me that this page could not load any ideas

    When I try to use the parental controls, I tells me that this page could not load any ideas


    Since when are you facing this problem?

    If it worked before, then do a system restore to restore the computer to an earlier point in time before the problem started.

    See these articles for help:

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • I try to use the clean disk and after it starts I get a message that it has stopped working

    I try to use the clean disk and after it strats up, I get a message that it has stopped working

    Original title: clean work investor disc

    Please use this tutorial and try to do the cleaning disc again.


  • When I try to use the Dell reinstallation DVD Windows 7 Home premium SP1 64-bit, it crashes when is about to display the windows logo.

    Re-installing Dell inspiron 19 has windows 7


    I have a Dell Inspiron 19. The Dell of Dell diagnostics disk utilities & drivers say all right. It is a Seagate 320 GB drive. I installed the drive on another computer and used sea tools to erase the disc.  Then I created a partition and marked as "bootable".

    When I try to use the Dell reinstallation DVD Windows 7 Home premium SP1 64-bit, it crashes when is about to display the windows logo.  A few pixels logo show and then it's there.  Any ideas?  I worked on it for several days.  Really a "stumper" for me and I did something like that for years!

    Original problem seems to be a massive viral infection (owner had no active antivirus software installation!) which led to the non-bootable computer.  After working on this for a while, I decided to just do again it.


    Located in the beautiful valley of the Shenandoah in Virginia


    Here's how to use the Dell Windows 7 disc according to Dell:


    If you have problems with it, try to Support Dell because it's their software:

    http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn

    Or try the Dell Support Forums:


    And these are some Vista Forums you are in.

    In Forum Windows 7 install:


    See you soon.

  • When I try to use the Skype window having problem

    When I try to use the Skype window having problem


    you don't say what problem?

    and if the problem only occurs when using Skype, ask the Support of Skype


Maybe you are looking for

  • Why will my reading to capture video in movie maker plays high speed like an old silent movie?

    When I capture Let's say for example a 5 MB of my camera void vid clip and then drag down to the showreel in movie maker to play, he plays in a fast speed like an old silent movie.  It also does not appear to capture the whole 5 MB, as clip when you

  • Error 800b0100 code - still can not update after you download CheckSUR

    I have Windows 7 Professional 64 bit.  I couldn't not all my updates.  Code error as above.  Follow the directions and downloaded the CheckSUR tool (twice).  Still not be able to download 7 updates, and they are mostly related to updates of security


    Hello I recently changed my ISP provider and the change came a new router. To change the new network, I reset my printer as indicated above for the default settings, hoping she would acquire the new IP address, but since then, the blue wireless light

  • ESXi 6.0 network connectivity problem

    Hi allHaving a strange problem here. In a nutshell, I have a certain environment and reconfigure the vNIC on the hosts. They are all part of a suite of UCS, and I took the model of service profile pre-existing, a clone and network cards accordingly.

  • Publish the Site on Business Catalyst

    I published my personal website (using first a Muse) on 123Reg.com as a replacement for my old site. I think now to hosting the site in British Colombia, do I have to remove FRO 123Reg.com before I download on BC?I see that I can host 5 sites within