Frag disc doesn't end, it just continues to run
Defragmenter
I put my internal Disk Defragmenter to work on the c drive of windows vista, but it rolls and without completing the task. Is there anything else I can do to achieve this? Are there reliable downloads available from microsoft to use?
Kay
Hello
The Vista defrag works quietly in the background without intervention on your part
http://support.Microsoft.com/kb/942092
In Windows Vista, there are a lot of improvements in the defrag engine and handling of fragmentation. By default, Windows Vista uses Task Scheduler to automatically keep the defragmented hard drive. This Automatic defragmentation does not affect the performance of the Windows Vista operating system...
If you want to use a much better defragmentation program which is free and where you can see the results, I suggest this one:
http://www.Auslogics.com/en/software/disk-defrag/
See you soon.
Tags: Windows
Similar Questions
-
Vista automatic update said updated 1 of 9 (KB2653956) installation stops at about 10% and custom finishes just continues to run.
I've been stuck here for 2 weeks
Hi Joepompous,
I suggest you to follow the steps in the link and check if it helps.
I hope this helps.
-
Original title: Powershell
My commputer won't allow updates. When I try the blue bar just continues to run. I tried to run Powershell, but it stops and says error has occurred. What should I do
Hello
1 - what you mean that you can not install Windows Update? If Yes, then the updates?
2 are. what Powershell you referring?
3. you receive an error message? If so, then post back the exact error message.
Answering these questions that could help us help you better. The following article could be useful if you are referring to the Windows updates.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
I started the disk defragment the task, but it has not completed the process. He just continues to run. I let it run for days and nothing don't past he never stops running. What should I do to get this to accomplish the task?
Hello
Take a look at my responses to a message here...
Concerning
GT4U
-
Continues to run 'check updates' for hours
Separated from this thread.
Someone at - he found a solution to this problem. I was not able to load the updates since June - like Omer Levy he just continues to run 'check updates' for hours but nothing happens... can someone give a reasonable way to sort it, you can.
Jan Kingsmill
These links do not work mate,.
The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.
http://www.SevenForums.com/tutorials/2797-Windows-Update-settings-change.html
Make sure that KB3020369 is installed, otherwise install it manually it is detailed with all versions, article page
https://support.Microsoft.com/en-us/KB/3020369
These links will prompt you to download as soon as you click on them just for you give a heads up :)
Win - 7 32-bit
Win - 7 64-bit
Then manually install page article detailed KB3172605 with all versions.
https://support.Microsoft.com/en-us/KB/3172605
KB3172605
Win - 7 32-bit
Win - 7 64-bit
After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.
If you need Visual AIDS to refer to this as answer 1 says,
-
I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer
Follow these steps to try to solve your problems of boot.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Im trying to install adobe creative suite 2 premium without cd and after running Disk 1 it ask disc 2 but I have just electronics cd physical disks
Unless you install the special download version provided by Adobe, everything that you install in the way of CS2 you will get very far. See below for an explanation and then follow download instructions.
CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html
-
Ip5 ios 9.3.5 line 4g doesn't have show just 3 g setting on hp 4g already tick
Ip5 U.S. spec in Malaysia ios 9.3.5 line 4g doesn't have show just 3 g setting on hp 4g already tick
This indicates that you purchased an incompatible version of your region. See below for the correct templates
-
I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?
Try the following. It seems yo may have to let the battery drain is completely:
- iOS: do not respond or does not light
-Also try DFU mode recovery mode post-test
How to put iPod touch / iPhone in DFU "Karthik doodles."
-If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.
-Try a different cable
-Try on another computer
S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.
-
My fan continues to run away, just bought today
Hi, I just bought the new laptop HP, but the fan continues to run away even if when I'm not working on it. Is this normal or should I make some adjustments? Thankx
Hello
You can navigate to the BIOS screen by pressing the F10 key as soon as you switch on the device.
You can enter the BIOS and choose the option which disables the ' Fan always ON ", and this should solve the problem.
-
Playback options - play once, looping or just continue to play
When I hit the space bar hiding it in about 10 seconds of video and then especially just a loop, but sometimes he will continue to play the clip in place. Is there a way to define what is happening? In the Preview tab, I loop options and to play once but do not just continue to play the full scenario.
I don't have a number pad on my laptop, so could not test that but the page you referenced said to pull down on the preview to reveal more options window. Change of range for duration and preview of the favours at length took care of it! Thanks for your help.
-
29 Firefox fails to come out properly and continues to run in the Task Manager.
It is a continuation of a thread found here:
https://support.mozilla.org/en-US/questions/997448 by Compumind.I pointed out that I had the same experience, especially at the opening of the email links in Thunderbird. I reported also that forced me to go back to 28 FF.
Moses responded by top wire and suggested:
(1) download a fresh installer of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).(2) the release of Firefox.
(3) rename the folder
C:\Program Files (x 86) \Mozilla Firefox
TO
C:\Program Files (x 86) \OldFirefox
(4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.
I followed these instructions carefully but no joy. When installing 29 FF, not only refused to leave (using "exit") and continue to run in the Task Manager up until I killed him after the opening of links in Thunderbird, but I find that he refused to come out after a simple navigation and links.
Moses had asked that I didn't answer in the original thread, so I re-post here.
In my view, that there is a serious bug. With Firefox 28... no problem don't except a minor that I have indicated here:
https://Bugzilla.Mozilla.org/show_bug.cgi?id=1002089Yet once I am obliged to 28 FF, although I miss the nice interface and security patches, I need to have a browser that works properly. My wife never even saw the Manager of the tasks before so that's the problem.
In addition, "guesses" made with this post, the only other thing usual outside that I do, is to have a security policy about cookies (accept by default... I make exceptions for cookies I want to keep and have several that are "allow only for the session.") I also FF the value delete history of navigation at the exit, but that takes a fraction of a second.
I look forward to when this matter can be addressed successfully and I am able to use 29 FF (and out properly... I can't wait for my wife to follow all of these instructions and it often close manually in the Manager of tasks... or what I want to do this.)
Good luck for all Mozilla projects. Having installed 29 FF twice and then back return 28 twice, I'll wait and see how this plays out. Please don't send me the standard "start in safe mode", 'restart with disabled modules', 'reset Firefox' stuff (the last time that completely destroyed my browser). I don't think that is what is happening.
Moses added that there is a problem with the e-mail notifications passing by, so take your time, friends.
I think now (temporarily) this bug or problem has its roots in "history leaving Compensation."
I made the leap after a few game with 29 PortableFirefox and reading the blog post linked here:
[https://support.mozilla.org/en-US/que.../997918#answer-566755]
.. .and installed 29 FF on my previous FF28 on my box. I unchecked the "clear history on exit" which was only to delete my history, not cookies or anything else, cor - el. My setting should not accept cookies unless I make an exception. Until the FF developers find a way to do this is functional, I'll just have to manually delete the history.
Furthermore, John99, you want to maybe privacy.sanitize.sanitizeOnShutdown set to 'False', not 'true' If you want to stop the automatic deletion of the history at the exit (attempt).
I've been running for about 6 hours. without experiencing the bug 'suspended '. So, I can live with that for now until this bug is fixed. It should be fixed... browsers are supposed to be able to do things like that.
On the other hand, I could find things go wrong... but so far I'm not having a problem.
I for several hours and will let you know later if things change.
Kind regards
Axis
-
Speech recognition will not start and continue to run
I am running vista 32-bit Home Premium edition. I finished the speech recognition session setting the microphone. I finished the tutorial. However, no voice recognition program continues to run. When I run the program of recognition (or when it is started automatically to the 'start-up', it starts to run and then goes into "Sleep" mode for a few seconds and then on 'Off'. The second time, I start speech recognition he will say 'Start speech recognition' and then go directly to 'Off '. When I click on the microphone icon in an effort to implement the program "On", I get an error of speech recognition that says "Please restart speech recognition. It is said in the body of the error message "speech recognition has encountered an error. Please restart speech recognition to ensure that you can continue to use the speech recognition". When I restart speech recognition error repeats.
Although the speech recognition tutorial seemed to work, the real speech recognition program doesn't have.
Does anyone know a fix for this problem? Thank you.
Hello Dirleton,
Thank you for your message. For testing purposes, could you try creating a new account on your computer? The process is described below:* make sure that you logged in with an administrator account *.1. click on the 'Start' button > right click on 'Computer' > select 'manage '.2. click on the arrow pointing down next to "local users and groups.3. highlight "users."4. in the right pane, right click and select 'New user' (enter information, then select OK)5. now right click on the new user and select "Properties".6. Select the "Member" tab and click on 'Add '.7. in the box type 'Administrators' and click on "check name".8. click on OKThen log off your computer and connect again the new account. Test the speech recognition, this will rule out a problem of profile corruption. We can then troubleshoot further.Please let us know if this or don't help solve the problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
No sound - "either Windows Audio and Windows Audio services end Point Builder is not running."
original title: no sound - Fix he said "either Windows Audio and Windows Audio services end Point Builder is not running." What should do?
When I ran Microsoft Fix it for audio, it says that it is unable to solve the problem. The message was "two windows audio and Windows Audio end Point generator services must run for audio works correctly." At least one of these services is not running. "What should I do now?
Content in double wire-
"When I try to use anything related audioi on my computer (volume of the speaker, open iTunes, watch a video), a box appears that reads,"c\Windows\System32\MMDevApi.dll is not designed to run on Windows or it contains an error. " Try to install the program by using the original installation media or contact your system administrator or support software provider. "The mystery is that I have nothing to my computer to ask for that. I have not installed anything new or change the settings. It just started happening. Any advice? »Hello
1. are you able to hear the sound after the error message?
2. you have an an external sound card or internal, installed on the computer?
Method 1:
I suggest you to follow the steps and check.
(a) click Start
(b) type services.msc in the search box, and then press enter.
(c) scroll down to Windows Audio and Windows Audio endpoint builder of Point
(d) both should be started and set to automatic if one or both are arrested.
(e) click the name to select it.
(f) click on restart the service at the top left.
(g) repeat for both if necessary. If some are not set to automatic, and then double-click the name and on the drop-down list to set the startup type to automatic and apply and ok your way out.
Method 2:
I suggest you to run the automated FIXIT from the link below. You can also follow the other steps and check.
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
Method 3:
If you have a sound card, I suggest you uninstall the audio driver from the Device Manager and and then install the latest audio driver version from the sound card manufacturer's website.
To uninstall the Device Manager sound, proceed as described in the link below.
Open the Device Manager
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
Find the audio driver in the list, do a right click and Uninstall.
You can also download the drivers from the link below.
Updated a hardware driver that is not working properly
Method 4:
If the steps do not help, I also suggest you to run a scan of the System File Checker .
Click on the link mentioned below for more information about the System File Checker analysis
http://support.Microsoft.com/kb/929833
Hope this helps and keep us posted.
-
Startup Repair will continue to run on windows vista
Dell inspiron 1501 just continues to operate little matter we are trying
Hello Dvavao,
Thank you for posting. Have you tried to unplug the computer, and then sign in again to see if he answers correctly. Also could you give some other details about what happened which could have caused this.
Looking forward to help you any further.
Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Can someone please tell me how to transfer an album that I did on my iPhone more than 6s Photos on my macbook pro?
-
Internet Download Manager works only with firefox
Identical to the header, last updated will not IDM work. Had to go back to an older version of firefox for IDM would work.
-
Launch pad is automatically opened when you use other applications like Safari
Hello! I use Macbook air 13 "mid 2013 with OS X EL Capitan and recently the launch pad is automatically opened when I am using other apps like Safari. Anyone experience this problem and no solution? Thanks in advance.
-
Sometimes when I try to send a person respond as customer default has not been downloaded., or in this case, he won't let me see a section of a web site, saying the same thing.
-
I have a new windows 7 and this update KB954430 keeps coming to install. I checked the history and it has been installed more than 20 times. What are Microsoft. How do I step there. In my old XP pc you can isolate/block an item in the Update window.