Frame channel Conversion Library of CAN

Hello, I am trying to use the attached ncd file to read from a series Board 2 via the Conversion Library, but it does not work. I can load the noncommunicable diseases to the Max and he read the channel very well.

What would cause this?

I use the vi USBCANBasicInput.vi sample. It seems impossible to debug, because it uses a dll for everything.

I use version 1.0.3.

Here extend CAN messages.

Thanks in advance,

Dustin

Advertisement

Dustin,

It was a pleasure to speak with you on the phone today.

It seems that the problem lies in the prolonged use of arbitration ID with the Frame channel Conversion Library. Here are some examples that show how to use this library with arb extended ID's

http://decibel.NI.com/content/docs/doc-6793
http://decibel.NI.com/content/docs/doc-6792

http://decibel.NI.com/content/docs/doc-6055

Concerning

Tags: NI Products

Similar Questions

  • CAN frame channel Conversion Library - add new channel will not convert on channel

    I hit a roadblock with the Conversion CAN frame v1.0.2 channel library.  I don't think I properly use the 'Add New Channel' vi because it always causes the frame on the canal to fail.  The channel to the conversion of image works fine.  I joined the Panel front and a simple example block diagram.  This VI returns the following error during the conversion of the chassis on the channel:

    Error 8702 is produced to convert image to Channel.vi

    Possible reasons:

    A call to the library met with a null pointer.
    Ensure that all entries in the VI have a valid value.
    In the case of tables, make sure the table is not empty.

    Any help would be appreciated!

    Thank you

    This issue is resolved by upgrading to the Conversion CAN Frame Channel 1.0.3 library and place the frchconvlib.dll file in the C:\Windows\system32 directory.

  • CAN frame channel Conversion Library

    Hello

    Is it possible to use this DLL with CVI? If so, is there a code example or user document?

    See you soon,.

    John

    No, this won't work, but I just discovered the virtual channels 256 and 257

  • Advanced CAN frame channel Conversion example of reference

    Hello!

    I wonder if anyone of you guys can help convert me this example LV7.1.

    The sample statement:

    http://zone.NI.com/DevZone/CDA/EPD/p/ID/5826

    Thanks in advance!

    Ogulcan

    Ogulcan,

    The example you want is built with a different version of the NOR-RIO and drivers in real-time.  Decommissioning of this example would require a system with LabVIEW 8.5 or 8.6 with the RIO more day and drivers in real time as well as a system with LabVIEW 8.0 and an older version of the RIO and the driver in real time.  It may also require a third system set up by LabVIEW 7.1 and earlier versions of the RIO and drivers in real-time.  Changes in these drivers and the VI included since LabVIEW 7.1 would probably also this example won't work with LabVIEW 7.1, which perhaps explains why it has been published for LabVIEW 8.5.

    Eric K

    Engineering applications

    National Instruments

  • I recently downloaded my favorite CD music in my I tunes library, how can you transfer this music on a USB Flash drive so that I can play the music through my stereo system H D - Bike. I'm 10 Windows on my PC

    I recently downloaded my favorite CD music in my I tunes library, how can you transfer this music on a USB Flash drive so that I can play the music through my H D - bike

    stereo system.

    I'm 10 Windows on my PC

    Select the songs in iTunes, let them slip into a file Explorer window showing the flash drive, drop.

    TT2

  • In the music library, how can I get my songs to sort alphabetically by song, not an artist?

    In the music library, how can I get my songs to sort alphabetically by song, not an artist?

    Go to settings > music > songs of sorting & Albums and select by title. Should be good then.

  • Using the bookmark Library, I can locate specific bookmarks, but there is no way of knowing which of my cases, it is in. Is it possible to do this?

    Using the bookmark Library, I can locate specific bookmarks, but there is no way of knowing which of my cases, it is in. Is it possible to do this? I have about 15 cases of bookmarks with a total of about 150 bookmarks. The research of the Library bookmark gives good results insofar as find the specific bookmark, but I IN. WANT to KNOW WHO MY RECORDS THE SPECIFIC BOOKMARK IS how can I do this?

    Take a look on these modules:

    https://addons.Mozilla.org/en-us/Firefox/addon/7372/
    https://addons.Mozilla.org/en-us/Firefox/addon/7377/

  • iCloud music library playlists can include music from your music library to iCloud. This playlist cannot be downloaded, because it includes other types of media or songs that are not eligible

    Some Audio files are not eligible in icloud library, how can I force icloud to copy in my iphone. They are legitimate files (audio course)

    The elements should be considered as songs (music).  They must be your music iTunes library.  If they are categorized as another type of media (through iTunes), as a podcast or an audio book, you cannot then put on a playlist that is in your music to iCloud library.

    The song file may not exceed 200 MB.  The song should not be longer than 2 hours.  The song encoding cannot be 96 Kbps or less.

    If your audio elements (like songs) are not eligible, you will be able to modify them to make them eligible.  How depends on the reason to be ineligible.  Alternatively, if you have iTunes classify 'song' as a podcast or an audio book, you can load them on the iPhone the 'old school' way, live sync.  To change the category of the item in the window to read the information of the element (in the Options tab) change Media kind of music Podcast or audiobook.

  • I lost all my Muse Widgets in the library, how can I get back them?

    I lost all my Muse Widgets in the library, how can I get back them?

    Wait, so you mean the real Widgets in the Widgets Panel?

    Not the library where you can store your own stuff (users also tend to call these widgets...)?

    Could you give the name of this widget that you have installed, which seems to have caused harm?

    I think the best solution is to go to the Adobe CC , this Panel application where you can manage all Adobe applications. Uninstall Museand re-install it.

  • Delete a photo library, now can bring into the iPhoto library

    I have Photos of El Capitan put in place to manage multiple libraries on the same MacBook Pro internal hard drive.  I was trying to create a new additional library, but seem to have screwed things up.

    I created the new photo library, called "BB_Photos", then introduced in photos from iPhoto to Snow Leopard.  I note that the same name iPhoto library is on a second internal hard drive.  The new library seems to have created OK in El Capitan.  However, I was unhappy and trashed the library of Photos of El Capitan, in the hope of re - create.  Now I can't pictures released Photos a second time.

    In Snow Leopard, the library presented as 'BB_Photos.migratedphotolibrary' and I can line up the pictures of El Capitan.  (Even once, note that these are on two separate disks, because I am dual boot.)  Photos I am trying to re-import or something, but I trashed this library.  Are photos ransacked still hiding somewhere in the Photos?

    The iPhoto library is visible from El Capitan pictures inside, but it is grayed out and not available.  However, I can still open and view inside Snow Leopard iPhoto library.

    How can I cancel my original error and get "BB_Photos" in El Capitan pictures?  I can't the library of Snow Leopard to be "not migrated" so Photos can see it again?

    Photos does not open "BB_Photos", because the file name extension ".migratedphotolibrary" shows that the library has already migrated to the Photos.

    Simply restore the file name extension ".photolibrary". You can do this in the Info Panel.

    Select "BB_Photos... migratedphotolibrary" in the Finder, then enter the ⌘I key combination to open the information panel. Change the file name extension in the "Name & Extension" section of the Info Panel.

    You may need to click on, then uncheck "hide the Extension."

  • With the help of successful library - Photos can delete originals on the hard drive?

    I have "manually manage" my Apple photo library (that is, what some call the "referenced" option).

    I created a smart photo album I want to permanently remove it from my Mac (out of focus, test shots, etc.). I'm curious to know if there is a way to use the Photo app to actually remove the vs photos through my individual files to perform this operation manually. This would be similar to iTunes when you remove the music, he asks if you want to delete the original files.

    I figured out how "reveal in finder" - but that does not let me do a single image at a time. I would rather try to make it in bulk.

    To be clear, I know how to remove pictures of pictures. I would go a little further and remove them from my Mac altogether.

    If you use a library "referenced" then it is your responsibility to delete the source files / referenced from the drive hard when you delete them from the photo library.  I have not seen any solution mentioned in these forums on how to automatically delete the source files.  One of the several disadvantages to manage a library of reference.

    If the extra work required to locate and delete the source files became too much, you can always consolidate library while it's now a "managed" and then deleting the library library will remove the files from the hard drive as well.

  • I use the MODBUS library and can receive data, but I can send it very well?

    Hello

    I use the Modbus Library to communicate with a VFD to control a fan. I use the master write and read vi. I can write data to the drive mechanism and get the fan to do what I want. The VFD is supposed to send a package of confirmation after I told him to do something and I can also read its records. When debugging the VI it shows that the problem is that the buffer always reads zero and the VI timesout. If I look at the USB adapter lights to RS 485, I use to interface with the drive mechanism, I see that the flashes of light RX immediately after I send a message. So I should have something in the buffer. Does anyone have any suggestions?

    Aaron

    OK, here's what has happened to those who have this problem. In the series Receive.vi MB The bytes to the Port of property node has been reading 0 even if there was something in the buffer. Executing the program was then stuck in a loop until it expired and never went to read anything of serial port buffer. I didn't spend too much time wondering why that VI has not worked and created my own. Within a period appropriate after writing to the serial port, I used the same bytes to the Port property node and was able to get the exact number of bytes to the stream and then VISA vi the number of bytes to read. I received the message of the right answer and everything seemed good. But of course that NO! Then I experimented with different speeds of writing to the drive mechanism to get the fan to operate at different speeds. I found a small range of speeds where I get no response to the VFD, either in operation or by sending me a response packet. After a while, I found that there is a mistake in the LRC-8 code in the MODBUS library OR. It does not prescribe that the LRC will be a two-character value. So if your LRC is proving to be a single character such as F value (which should be 0F) you get an incomplete MODBUS message. This has been easily corrected in the vi LRC8 saying "number in hexadecimal string" vi to produce output with a minimum width of two. Then everything worked fine. Moral of the story, it's the MODBUS library is awkward.

  • I have a stranger followed showing in my library I can't delete it why?

    In my library, it shows unknown artist, unknown genre, year unknown, inknown album.

    HI - it probably relates to something you have previously changed or moved, so WMP has lost its link with it. Click on the track in WMP and then right-click and select "open file location". If you get the error message saying that the file is not found then, that's what happened (and the reason why you can not remove it).

    Then you'll need to do is to restore your WMP library by selecting 'Tools' - 'Advanced' - 'Restore Media Library'. If the 'tools' is not visible, do a right click in the bar at the top right of 'library '. That should fix things. -Cheers, Ric.

  • Wrong file download, library books can bring them on computer

    After having used it with happiness ADE to load books from library on my computer for 2 years, I went and he screwed up.  I didn't have a shortcut for ADE on my desktop - the only way I could get was to open Adobe Reader and then via the "help" menu in Adobe Reader, I could go to ADE.  Well, I got tired of doing that, so I've played around with things and found a way out of ADE and make a separate icon on my desktop and start menu.  I thought everything was fine until the next time that I tried out a library book.  All of a sudden when I went to download the book, I got an error message & I noticed that the name of the file where the book was trying to load to a changed from ' adobe digital editions ' something weird, like 'ACS' as well as a few more things.  And it does not give me the option to change to something other than a drow in the menu drop-down or by browsing my files or anything like that.  I am still able to enter in ADE & use it for books that I have already downloaded, just can not download anything again.

    Is it possible for me to change it manually to the correct file name?  Is it possible for me to solve this problem without uninstalling and reinstalling ADE?  If I need to uninstall, it is possible for anyone to give me very detailed instructions, step by step, as I agree with the basic principles on computers, but not very good with this stuff.  I'm on Windows XP.  Thanks much for any help you can offer!

    Try to reinstall everything, uninstall it and see if that helps.  It should not upset your old books and settings.

    As you are on XP, I suggest the slightly older v1.7.2.  (In fact, the new version has so many bugs I suggest the other oldest for everyone.)

    1. Download from http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions/_jcr_content/main-pars/procedure_2/proc_par/step_0/step_par/download/file.res/digitaleditions.exe
      (see Adobe page http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html for more details).
    2. Click on the file downloaded in your browser (or double click as appropriate to the particular browser) to start the installation.
    3. He's going to ask you a few questions, just take all the easy answers.

    With luck, that will make the file association for the .acsm file.

    If it isn't, there's a chance that at least passing by the rigmarole you tried above works now.

    Good luck...

  • where to place the frame supporting the library?

    Hi all
    I have a question about the framework of the adf.
    As part of the adf all the library which we add place in weblogic server and real applications we add only the library reference.
    If you see some othe framework like spring where we add every spring framework libray in the application ear file.

    How to put the associated Framework library is better to put on server to add the part of the ear file.

    Thank you
    AK.

    Put the library once on the server: it can be shared between multiple applications (where the name "shared library"). You could do the same thing with spring on WLS if libraries you want.

    John

Maybe you are looking for