Frames and DF bit

Similar Questions

• XNET incomplete LIN frame, how the bits are transmitted?

  I have a description of LIN, who has a few incomplete frames (i.e. signals that make up the frame require all bits in the frame).  For example, I have a 4-byte frame which has 5 signals, but they use only the 28 pieces of the framework.  How are transmit the unused bits?  1 or 0?

  I have attached a picture of the image properties in the XNET database editor.

  By default, XNET will fill the frame with leading zeros CAN, LIN and Flexray. You can change this behavior for some types of session by using the XNET Frame property: default payload. The XNET Hardware and Software Manual has more details about this behavior of properties.

• Firefox 42.0 glib dependency 1.22 or more is confusing bacause libglib (64) is currently 2.0 and 32-bit is currently 2.41. Which one should I use?

  Slackware64, running current system.

  41.0 Firefox currently, eager to install firefox 42.0.

  I am looking for internet for dependency libraries to install as follows:
  Download libraries as .rpm
  convert to .tgz
  make a soft package,
  install with installpkg.

  a disappointment: go to the download page, and it said I seem to be running an old version of Firefox and offers a download button.
  It does not say which version it has detected, I had, nor it does not say what architecture it detected, nor the ability to change the target to download if I download on another machine. Just a download button green big without telling me what version or the new firefox cpu I download is for. Can they make it worse? I need to know if they are shoving me a 32 or 64 bit program and what architecture they detected until I push the download button.

  https://www.Mozilla.org/Firefox/42.0/system-requirements/
  Firefox won't work at all without the following libraries or packages:

         GTK+ 2.18 or higher
         GLib 2.22 or higher
         Pango 1.14 or higher
         X.Org 1.0 or higher (1.7 or higher is recommended)
         libstdc++ 4.3 or higher
  

  For optimal functionality, we recommend that libraries or the following packages:

         NetworkManager 0.7 or higher
         DBus 1.0 or higher
         HAL 0.5.8 or higher
         GNOME 2.16 or higher
  

  Rather then clicking the Green download on mozilla.org button go to the systems & languages link below because it lists both 32-bit and 64-bit Linux builds in all locales.

  The GLib requirement has not changed, so if you use 42.0 Firefox 64-bit www.mozilla.org/firefox/all so it should work the same as the 64-bit Fx 41.0.x.

  A heads for the next version of 43.0 Firefox, Linux users will have GTK 3.4 or more 2.18 + was minimal until til 42.0 Fx.

• Dropped frames and jerky video ATV4 TVOS 9.2

  I'm having a problem with my Apple TV after upgrade to TVOS 9.2. Whenever I play video (especially videos YouTube, but this also happens with other applications such as WatchESPN), after a while, the video begins a fall frames and the sound is not synchronized with the video. I can remedy temporarily by force, killing the app or by restarting the Apple TV, but it comes back later and video will get out of sync and drop frames. How to solve this? This came after my update for TV OS 9.2.

  Sounds like a network problem.  Check that you are connected to the correct wireless.  Some routers are dual band, so make sure you're on the 5 GHz band.  If this does not work, I do a full restore back to factory settings and re-setup.  I know it's a giant pain, but if this isn't a connectivity problem, this is a question of OS.

• Satellite A100 - need tools for Windows 7 and 64-bit drivers

  Hello

  I have W7 RTM from Technet, and I install 64-bit edition on my laptop ' Satellite A100 (PSAA9) "I need 64-bit drivers and 64 bit utility (value added package..), but I can't find them... value added 32-bit package does not work on 64-bit (installation is rejected) :/"

  Sorry, my English is very very bad

  Thanks for the tips

  I do not think that you will have success installing Win7 64 bit on an old system as the A100, you should install 32 bit Win7 and use Vista 32-bit drivers.

• 64 bit preinstalled operating system and 32-bit recovery disc?

  Hello

  I saw (somewhere) that if you buy a laptop Toshiba with a 64 bit OS, you can create your own recovery discs, and you are given a 32-bit recovery disk by Toshiba in case you want to switch.

  Is this true and if so what models does this apply to?

  Thank you.

  Hi mate,

  Yes, maybe this information is just, but I can say from my own experience on some laptops like Qosmio X 300 models are delivered with both versions. This means that on first commissioning you can choose between 32-bit and 64-bit.

  In addition, if you create the Toshiba recovery disc, it creates two different discs: one for 32 bit OS and the other for the 64 bit OS.

  You can check this in specifications detailed on the Toshiba site. Just look for the laptop you want to buy and you can see what OS is delivered. ;)

• EliteBook 8730w: number of key Windows Vista 32 and 64 bit

  Hello

  XP has been installed from a disk partition (D)

  My laptop has been improved from XP to Vista 32 bit with the CD that I got the pakage.

  In the buttom is a buffer with the key number.

  I have the CD with Vista 32 and Vista 64

  1 is the number of the same key the 32 and 64-bit

  2. I would like to format the C drive.

  3. can I install Vista 64, from the CD?

  Thank you for your help

  No worries. Yes, you can perform an installation of Vista with the DVDs you have. You can reformat the hard drive as part of the installation.

  Before you start, go into the Device Manager to see what wireless adapter, graphics card and network card is installed and write it down. This will allow you to save time.

  You will need the following DVD that you said that the laptop came with...

  Operating system DVD of Windows Vista Business SP1 (64 - en)

  Application and Driver Recovery DVD 32-bit and 64-bit for Windows Vista

  Note the twenty five characters activation of license key before starting. Enter it on the request for the installation of Windows script. Once the installation is complete, use the disk to install the drivers. If HP Support Assistant is available on the disk driver and application, install also.

• AHCI drivers for Windows XP Professional 32 and 64-bit

  Hi all

  I have a HP Pavilion p6 2355il desktop PC

  I want to use Windows XP Professional on my pc so I need driver AHCI for 32 and 64 bits at a time. Drivers must be ready for installation f6 Option (text-mode Setup).

  Thanks in advance
  Sunil [personal information]

  Hello:

  Here is the link to the AHCI drivers, you need for your PC.

  XP 64 bit is the first download.

  http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21730&Keyword=Intel+Rapid+Storage+Technology+(Intel+RST) & lang = fra

  You must either wake all the drivers or use a USB FDD to install the AHCI driver specific necessary for your PC to the F6 prompt button which I think is the Intel (r) Desktop/Workstation/Server Express Chipset SATA AHCI Controller.

  You can check by going to Device Manager and click to expand the IDE ATA/ATAPI controllers section to see the name of the installed sata AHCI controller.

  This is the driver that you select in the list on the floppy drive if you use the method of installing the drivers floppy.

  If you would rather integrate the drivers, here's a guide to do it.

  Read the Intel section, and then follow the instructions in the document to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-...

• Laptop HP compaq 6710 b: upgrading RAM from 4 to 8 GB and 32 bit to 64 bit

  I want to hear if it is possible to upgrade my 4 GB of RAM 8 GB with operating system if necessary to move from 32-bit to 64-bit and 32-bit

  artsuna

  Hello

  Sorry because it's an old notebook, according to the textbooks he say's that support the maximum memory is 4 GB (Page 2)

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c02834030-1.PDF

• Can I use Labview 2013 on 64-bit and 32-bit PC interchangeably?

  Hello

  I am running Labview 2013 basic package on Windows 7/64 bit laptop, which is not stored permanently in the laboratory.  I need to buy a 32 bit desktop PC to run a non-Labview application, but it would be very convenient to use the new 32-bit machine to run Labview also, since it WILL BE at all times in the laboratory.  Then I wouldn't have to connect or disconnect the laptop computer in the laboratory every time I do the development of the system.

  Can I load my version of Labview 2013 on a desktop Windows 7/32-bit and write/run system live even as I do on my laptop Windows 7/64-bit?

  If the 32-bit and 64 - bit are interchangeable, so, I would get a higher end 32-bit system.  If they aren't, then I get the cheapest available 32-bit system and dedicated to the non-LabVIEW application.

  Thank you

  Dave

  LabVIEW edition will almost certainly be the screws you develop using 32-bit executables on Windows 32-bit and 64-bit systems.  What will certainly be different is the LabVIEW runtime system, so be careful when you build executable files.  Certain pieces of evidence that this is probably, it's developed under Windows XP (32-bit) code will run fine on Windows 7/64 (in development Mode).

  Note that I'm assuming that you installed LabVIEW 32-bit on your system Win7/64 (although there is a 64-bit version of LabVIEW, my understanding is that he could not be "ready for Prime Time").

• Cache objects VI shared between 32 and 64 bit?

  Transferred into the LAVA: http://lavag.org/topic/16349-vi-object-cache-shared-between-32-and-64-bit/page__pid__99898

  I am currently working on a major project that is to be deployed in 32 - bit and 64-bit flavors. This means that I must periodically switch between installed versions of LV to build.

  It * seems * that if I work in 32-bit BT, and then I close and re-open my project in 64-bit BT, that everything needs to recompile... even if I had only changed a few things since the last, I worked in 64-bit.

  It seems that while LV keeps a Cache of objects VI separate for each version of LV, that it does NOT keep a cache separate for 32-bit versions and 64-bit. Is this really the case?

  Fabric Hello,

  LabVIEW maintain separate caches for versions 32-bit and 64-bit of the same version, but in the same file. They are separate entries in the objFileDB. Because 32-bit and 64-bit are very different beasts, the project must be recompiled in order to adapt to the new platform every time that you open in a new environment. It is possible to separate the compiled source code code. Research in the other forum posts, this separation likely to cause a higher risk of corruption VI.

  Best,

  tannerite

• What is the difference between 32-bit and 64-bit Windows?

  soft micro isn't the developer - iv bridge was asked to, bell etc? Nobody seems to know.  I am not computer savy

  original title: re-32 bit - 64 bit.

  See if this helps:-

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  If she please vote as helpful.

  Thank you.

• Michael Kossar: Concept of 32-bit and 64-bit

  I'm Michael kossar, I heard the term 32-bit and 64-bit machine, but what is the concept behind it? Please explain my question.

  I suggest to buy a 64-bit computer.

  Please read:

  http://www.PCAdvisor.co.UK/features/PC-components/3584953/32-bit-vs-64-bit-x86-vs-x64/

  and

  http://www.MakeUseOf.com/tag/64-bit-computing/

  See you soon,.

  J

• 32 and 64 bit

  What is the difference between 32 and 64 bit

  Vs 32-bit 64-bit

  32-bit and 64-bit Windows: frequently asked questions
  "Of the answers to some common questions about the 32-bit versions and 64-bit Windows"
  http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspx

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows XP Media between 32-bit and 64-bit versions?

  original title: Windows XP Media bit versions

  Windows XP Media between 32-bit and 64-bit versions?  I think I have 32 bit, but not to the House to check.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Only 32-bit.