FreeCell in Win7 problem

I have done a series of "undo" and my freecell then haywire. I have an open cell which does not allow me to place the cards; and the next open cell receives all cards that should be loaded into the empty cell and places them on top already loaded maps. It's crazy. I ran all tests antivirus, mcafee, spyware, etc. I rebooted. It is a problem for 2 days now.

Hello

You can try to disable it and re-enable back.

1. close all programs.
2. click on the Start button and then click Control Panel.
3. under programs, click on uninstall a program.
4. in the pane tasks, click on turn Windows features on or off.
5. in the windows features list, click the plus sign next to games.
6. under games clear the checkbox next to FreeCell.
7. you receive a warning message in a pop-up window. Click Yes.
8. now restart the computer and then go to Windows features turn on or off features. Place a check for FreeCell. You receive a warning message in a pop-up window. Click Yes.
9. restart your computer.
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

You can also try to run the restore of the system on your computer.

System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

To restore the operating system to an earlier point in time, follow these steps:
1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

If you are prompted for an administrator password or a confirmation, type your password or click on continue.

2. in the System Restore dialog box, click on choose a different restore point and then click Next.
3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
4. click on finish.
For more information visit http://support.microsoft.com/kb/936212/

Also check out this link:
http://Windows.Microsoft.com/en-us/Windows7/FreeCell-how-to-play
http://Windows.Microsoft.com/en-us/Windows7/learn-about-Windows-games

Hope this information is useful.

Umesh P - Microsoft Support

Tags: Windows

Similar Questions

  • HP 350 G1: HP 350 G1 driver 32-bit win7 problem

    Hello
    Please can anyone help where to find driver for HP 350 G1 (intel i5-4210U) correctly.
    I installed Win7 32 bit and try a lot of driver to install but without success.

    Above all, nothing works (wifi, video, bluetooth, sound...)

    Thank you.

    I have install the program which identifies the devices on my laptop, then I look separately drivers and solve the problem.

    all devices are recognized in except usb device manager 3, but it's market.

    Thus, HP 350 G1 run on 32 bit win7.

    Thaks,

  • dual boot Windows XP win7 problem

    Salvation; have installed winxp. installed win7 win7pro started but winxp error hal.dll lack. Used easybcd to set the winxp boot problem but win7 is lost in the process. XP also had a procedure entry point error decodepointer is not not kernel32.dll. So I repaired the installation of xp and of course lost my sp3 and install that once again.

    So here's the question. How to get win7 and how do I get the two BONES to start. Please keep in mind that the two are installed and xp starts and was the first installed.

    3 partitions. XP 60 GB, 7 60 GB, the rest of the storage of 1.7 to disk.

    There is a guide here

    http://Windows.Microsoft.com/en-GB/Windows/install-multiple-operating-system-multiboot#1TC=Windows-7

    Another alternative, because you have Win7 Pro, is to use the XP mode (download free for Windows 7 Pro or better)

    http://Windows.Microsoft.com/en-GB/Windows7/products/features/Windows-XP-mode

    Let us know if you need any clarification.

  • New pieces of PC and Activation Win7 problem

    Hello!

    I built a new PC for myself and wanted to install version Boxed of Win7 bought a few months ago.
    The key to the box was used for formatting the old PC.
    Now the key will not work with new construction.
    The keys are assigned to specific Build?
    Even if I buy a BONE in a box separate is the key always are assigned to a PC, he is first used on?

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • How to troubleshoot xp-> app win7 problem?

    We have an old vb6, who wrote on XP application.  It uses the FTP command to ftp related catalyst to our server brand.

    I thinapped using 4.6.1 and it ports ok to another box to XP, but when I run it on win7, I get an error: 'command not implemented on this server' when I click on the show button on my app.

    Interestingly, if I deliberately incorrect user ID (in my application), I get a different error: "unable to establish an ftp connection.

    This has led me to wonder if the problem is with the CHDIR (change directory), which is what happenes after the connection is made.

    In any case, how do you solve a problem like this?

    On the original pc, the program is installed in c:\edge, and he gets to write a log file to this location.

    It uses an access database in c:\edge.  When I run threaded thin on win7, where this database?


    Am I able to inspect this log of my win7 box whichi file would be c:\edge on my native application?

    Where should I go from here?

    Totally confused (day 33 Eval).

    Thanks a bunch for suggestions or you could share strategy.

    Mike

    I suspect that your dll applications normally available in a Windows XP box application. A way of who should run the Analyzer Log and after you have converted the file as text, open it and search "potential errors. In this section we list everything that was some sort of error and you can often see calls to the dll that the errors here. Could lead you one of which is missing. Simply add this one to the project and rebuild.

    Regarding the log file you will likely find in users profile; itinerant %AppData%\Thinstall\SandboxName\%drive_C%\edge

  • Tecra A4 and Win7 - problems with PCMCIA card driver

    I've recently updated my old laptop Tecra A4 - PTA42E - (in great condition however) for Windows 7 and it is now in the best shape ever except for the PCMCIA card. In fact, to have Windows 7 installed I had to rename the pcmcia.sys and pcmcia.inf files during the installation (to .old or .bak) otherwise the new operating system would not start. The same problem has been experienced by many other users Tecra A4 and the solution is available in a number of forums.

    Although I use no more than the PCMCIA card slot, I want to fix this for a reason: If, in the future, I need to re - install Windows 7 for some reason any on this laptop, I have to repeat the same process - rename the pcmcia.sys and pcmcia.inf during installation, in addition, the new operating system does not start.

    I do not understand that the original drivers from the card slot (Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7, but it is there any updated driver that works for windows 7? And if there's a how can I replace the old drivers in my system so that in the event of re - install Windows 7 I will not have to go through the same process? TI site is no help, and Toshiba does not all drivers to download.

    Last but not least, if there is a driver available, I used the card slot for 2 ports USB 2 or 3 additional which are really necessary.

    Thanks to the forum, in advance

    Hello

    The pcmcia.sys and pcmcia.inf files are part of the Windows System.
    This driver isn't provided by laptop manufacturer, but it is a Microsoft internal driver.

    You mentioned that the pilots of the original card slot Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7.

    To my knowledge, this driver does control not the PCMCIA location but this driver controls the card reader that supports the MMC card, SD card, card xd picture card, SM card, Memory Stick and Memory Stick Pro.

    However, the Tecra A4 is very old model of laptop. The driver will not be updated for this camera and it looks like Windows 7 drivers never had to be released the driver Toshiba UE

  • Satellite C50D-A-13R and WIn7 - problem of USB 3.0

    Hello, can pls somebody help me on this:

    I expelled Win 8.1 portable a.m.. and installed Win 7 Home Premium SP1 instead.
    Everything went smoothly so far, but the USB 3.0 driver:
    It is always marked with exclamation in the devicemanager.
    I had downloaded all THE 34 drivers/utilities for Win7 and installed them, of course, the USB3-pilot data, too.
    but still, this tenacious thing...
    Can anyone advice on this?

    BTW: is there a certain sequence/order these drivers/utilities need to be installed?
    And if so, why are there no clue on the download page?
    And another thing: for some devices are two different drivers being given, how do I know which is the correct?
    And finally: How can I disable the touchpad?

    Thank you very much in advance for your help...
    IsNis

    > is there a certain sequence/order these drivers/utilities need to be installed?
    This installation order is present to win 8.1 and you will find on the page of the driver Toshiba UE (installation instructions)
    It seems that these setup instructions for Win 7 are not available.

    > And another thing: for some devices are two different drivers being given, how do I know which is the correct?
    Check the device that is present in your model of laptop.
    How to do? The procedure is described here:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

    > And last not least: How can I disable the touchpad?
    You must install the driver of pad touch (Alcor and Synaptics)
    Then, you can use the Fn + F5 function key to enable or disable the touchpad.
    You can also disable the touchpad go to Panel of-> mouse-> device pointing (or Advanced tab). In the settings (or properties), you will find the touchpad options and also the ability to disable the pointing device internal.

    Regarding USB 3.0
    Laptop Satellite PSCGWE C50D-A-13R supports the AMD chipset. As a result, AMD USB 3.0 driver must be installed.
    Next to the installation of the AMD USB 3.0 driver, the AMD/ATI display driver should be installed since such driver contains also the AMD chipset driver files.

  • Satellite A200 and Win7 - problem loading the graphics driver

    Hi guys I have a problem with my Satellite A200 (PSAF6A).
    I installed windows 7 just now, now half the time when I start the computer it displays a message on windows encounters a problem loading the graphics drivers and the resolution is terrible. When I restart immediately, most of the time, it loads fine - no message and a good resolution. I tried many driver reinstall but it is always the case.
    Someone knows what's the problem? Is this with windows 7, or do you think the graphics card can be on the road to extinction?

    Thanks for your help, a lot.
    -Chris

    Hello

    It was ok before installing windows 7? I don't think it's a hardware problem. Have you installed the driver for the Toshiba driver page?

  • FreeCell save game problem

    I saved a game I played and now impossible to cancel the function. I don't want a game to be saved at all. I have tried leaving the saved game, but it never ask me for anything and the window closes without any possibility of 'give up' the game. FreeCell always wonder if I want to continue my game saved at the beginning of the next session.

    How can I delete this saved game? I don't want a game to be saved in my Freecell!

    Hello

    You can try the steps below to delete a saved game

    1. open the Games folder by clicking the Start button, tap all programs, games, and then clicking Games Explorer.

    2. Select a game.

    3. on the toolbar, click the arrow next to the room, and then click saved games.

    4. right click on the saved game that you want to delete and then click on remove.

    http://windowshelp.Microsoft.com/Windows/en-us/help/84799807-5a25-495D-9589-d5887df014dd1033.mspx

    Kind regards
    Support of yama - Microsoft.

    Visit our Forum of Microsoft answers Feedback and let us know what you think.

  • Solitaire in Win7 problem

    When I play Solitaire in Win 7 Ultimate, the icon in the taskbar will jump on the side and the monitor starts flashing.  I only play Solitaire, so don't know if this problem exists with other games.  I use a single monitor and I use (Win 7) proposed the resolution 1600 X 1200.  However, the problem is exhibited with other resolutions.  Using "Windows features", I turned it off lonely, restarted the computer and then walk back.  No change.  The problem still there.  I also played with Visual effects by disabling the anamation control.  It helps, but the problem is still there but less.  This problem only appears when I run Solitaire.  Everything else works well.  Any ideas?

    As a result of this question: I replaced the ATI video card with a card that features NVIDIA chipset.  Problem solved!

  • LaserJet 1300 driver for Win7 problem

    Plugged my Laserjet 1300 in my new computer (System 7) via USB - and Windows could not find the right driver for it.

    I cancelled Windows trying to install driver automatically and put the original driver CD disc (Serial #Q1334-60107 ver 2.0) in drive.
    but I couldn't get Windows to recognize the printer, even after re-boots.

    Since I bought the printer some time ago, I checked for the updated drivers online, that would be 64-bit.

    I installed it:
    UPD pcl5 - x 64 - 5.4.0.11744.exe

    During driver installation, I plugged the printer & turned on at what I thought was a good time. I see this:
    'HP Universal printing PCL 5' as printer - but it will not be printed.

    I tried Windows "Uninstall" feature, but it does not show the pilot, to uninstall it - OR where the driver of the located.

    * QUESTIONS: How do I uninstall the driver? Use disk upd pcl5 - x 64 - 5.4.0.11744.exe OR original pilot #Q1334-60107 ver 2.0?

    What is the procedure for installing this?-I can't find anything, despite an afternoon of Googling.

    Thank you.

    Did you follow this guide to install printing? Installation of LaserJet 1300 Windows 7

    You shouldn't have to navigate to the driver you download. Actually stick it in the trash at the moment when you set "Add a printer", you must select "add a local printer. Ignore the writing to the right, which applies only if everything works properly. If you follow the guide at the top it should install correctly.

    No need to feel stupid and no problem at all to help. That's what I'm here for

    -Sean

  • M125 synch to the Win7 problem

    Trying to USB sync my old m125 with my new Win7 Pro (32 bit) of the machine to work. Always worked fine on XP prior. By suggestion of Palm, Palm Desktop, I installed v. 6.2.2 and the installation went smoothly. HotSync seems to "work" normally, but the data on my m125 is not appearing in Palm Desktop.  User name is OK (I've never had a) m125 both HotSync Manager. Any suggestions would be greatly appreciated. Thanks in advance.

    Just found the answer by searching on the forum (I know, should have started there). For those with Win7 32 bit, just download the free app named PalmHotSynchSetup here: http://www.pimlicosoftware.com/ (bottom of page).  I have it made, selected the option to load legacy databases when invited, and then ran HotSync, and Alto! all the data on my handheld has appeared in Palm Desktop. At every 2 minutes. Great, now I can continue to use my old m125.

  • Skype on Pavilion DV7 Vista and Win7 problem

    I have problems with Skype 5.1 - when I try to open it a message appears 'Skype has stopped working, check online for a solution and close the program, etc.'. Nothing is displayed when clicked. I tried searching for virus & update drivers without success. My DV7 was initially running Vista so I decided to do a new install of Windows 7. To my surprise, the problem with Skype persisted, so I can only assume it is hardware partner. I've updated the Bios without success.

    I found a partial solution - start Skype in Win 98 / ME compatibility mode. Skype opens but the video & audio quality is poor. I have Skype installed on 2 desktops with Vista & Win 7 & it works perfectly, so the fault must lie with my HP laptop. Any help would be appreciated.

    Update: if I disable video IDT Audio Device Codec drivers Skype works well (in Win98 / ME compatibility mode) without sound. This suggests that the audio drivers are the cause of the problem - there are several posts on this topic. I tried to install an older driver (6.10.6225.0 instead of 6,10 6276.0) but the program crashes still after a few minutes on a call for the use of the CPU to 85-90%. My machine is the DV7-2030ea with a processor AMD Turion 2.2 GHz, 3 GB RAM, ATI Mobility Radeon HD 4500/5100 graphics & AMD HD Audio. Someone else had this problem?

    Tried Skype 5.2 - reluctant to install & video out does not work. Decided to return to 3.6 (360216). Only works under Win 98 / Me compatibility, but No problem with the gel etc even mode after 30 minutes. Anyone with problems above with DV7-2030ea or similar machine spec, I would say:

    (1) use Skype 3.6 instead of a newer version.

    (2) run in Win98 / Me compatibility mode.

    (3) if the problem persists, replace IDT HD Audio Codec drivers with those of Microsoft.

  • Dégrad windows 8 to the win7 problem

    Team,

    I installed win8 on laptop computer dell model inspiron n4050 n completed successfully. Because of my need, I have again reinstalled win7. But I got error dvd dri driver does not exist. I can't install win7. I've tried ful format drive c by Hiren s boot cd, but I can't yet.   I found the solution from google completely formatting the hard drive to reinstall win7 conditions I don't want that.please help me.

    Boot from the Windows 7 DVD

    For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

    http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

    Click Install now

    Accept the license agreement

    When the option is displayed to select a type of installation, click (Custom advanced)

    Select the disk partition where you want to install Windows 7 click Next.

    You will receive the following warning:

    The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

    (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

    The installation program will now begin installation. During installation, your computer will be restarted several times.

    Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

    http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  • Latest Flash player on IE9 and Win7 problems

    After many attempts, I was finally able to install the last Flash on IE9. Installer says installed successfully. Each page visited then poped a mistake than Flash Player IE would open outside of protected mode. Previous version does not cause an error. Internet Explorer settings have not changed. Uninstaller used Flash. Downloaded Flash for IE and non-IE. Version of IE installed. Installer says installation is successful. Same popup of protected mode.

    Don,

    If you haven't already done so, you could:

    1. download uninstaller stand alone

    2. reboot your system

    3. launch the uninstaller

    4 remove the following folder, depending on your operating system:

    • 32-bit Windows - c:\Windows\system32\macromed
    • Windows 64-bit - c:\windows\syswow64\macromed

    5 restart your computer

    6. download and install Flash Player located here:

    Thank you

    Chris

Maybe you are looking for

  • need help with windows vista

    I need help, 1 there is an error code 10 on Teredo Tunneling Pseudo-Interface, it indicates that the driver is unable to start. I click on find the solutions button but nothing happens. When I click on the button to update the driver it says it is al

  • (Vista) suddenly stopped to save all downloads.

    SE acts as if the recording, but the file does not exist. ???

  • Speech recognition in Microsoft Word

    I just started using the Windows Vista built in the "Speech recognition" program and its working well except for one thing. I work everywhere (chat rooms, etc.) but not in my word processor (Microsoft Word, Microsoft Words or my internet Editor Tool)

  • Webcam works do not, Lenovo U310, Windows 7, 64 bit, Youcam not detected

    I have a Lenovo U310, Win7 64 bit which is around 2 years its integrated YouCam 3 webcam is inoperative for a few months now. Cyberlink YouCam does not appear in the device indeed Manager that no camera is to be detected despite the opening of hidden

  • LWAPP and VLAN

    Hello Please, help me understand one thing here. When you use WLC on router, all AP communicate with her using a tunnel encrypted via the LWAPP Protocol. Now, according to the documents, for each SSID, you configure VLANS separated to keep isolated f