FreeCell started to freeze from time to time

Similar Questions

• Satellite L855-123 freezes from time to time

  Hello

  My laptop freezes from time to time, especially just after that is (re) starts. Most of the time the audio or the video freezes for a few seconds (any program I use), it affects everything else too (for example, when music freezes, google chrome will act weird as well), but I am able to move as much as I please.

  In Event Viewer, there is a lot of "iastor, id: 9" since the 20th of this month (the day all gel started to happen). But as of yesterday, it seems to be have been replaced by "atapi, id: 11» I don't have any new software before all this happened?

  I looked around and tried a couple things that have helped others: off Link State Power Management; made sure all drivers have been updated; Uninstall Intel Rapid Storage Technology. Nothing seems to work here however.

  If all goes well, there is something else I could try before I have to go through the hassle of reinstalling windows 7 or get new hardware.

  Thank you.

  I guess you do not reproduce this problem of gel.
  It very difficult to talk about issues that cannot be reproduced or occur occasionally.

  But you mentioned the 'file iastor in your ad.
  Iastor belongs to the Intel AHCI / RAID or SATA driver package.

  So I think that the problem is related to the HARD drive or the HARD disk controller.
  I recommend you update Intel® Matrix Storage Manager and Intel Rapid Storage Technology driver to the latest version (check page Intel).

  If this is insufficient, recover laptop using Toshiba recovery disc.
  In case this is not enough, you should check if the internal HARD drive might be the occasional reason for this system of freezing.

• iPhone 5 screen freezes from time to time after updating to ios 10.

  iPhone 5 screen freezes from time to time after updating to ios 10. Then, should I block the screen again and unlock it to make the iphone work again.

  Hey Nilay182,

  Thank you for using communities Support from Apple. I can see from your post that you are having problems with your iPhone freeze or does not. Having a reliable phone is important and I would help him get yours working normally again. I have provided a link that explains how to troubleshoot a few things with your phone when it does not.

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  ​
  

  If you still have problems with your screen after you follow these steps, let know us and we can continue to troubleshoot from there.

  Kind regards.

  ​

• My windows 8.1 is running very slow and freezes from time to time.

  My windows 8.1 is running very slow and freezes from time to time. So I ran sfc/scannow. It finds corrupted files, but could not correct. So I ran "dism / online/cleanup-image /restorehealth ' but there as well. Please help as soon as possible. Thank you!!!

  Original title: find files corrupt after sfc/scannow and could not repair

  Hello Akash,

  Thanks for the reply.

  As you said, after completing the scan found SFC, you get an error message indicating that there is corruption but was not repaired. Then, please follow the following suggestions to solve the problem.

  Use the System File Checker tool to repair missing or corrupted system files

  (Refer to: manually replace the corrupted file with a good copy of the file)

  http://support.Microsoft.com/kb/929833/en-us

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

• video in fullscreen makes computer freeze from time to time

  Recently, my computer started to glitch during playback of videos and sometimes even in music.  When the video is full-screen every minute half-minute or so it will freeze for a few seconds, causing the audio quickly repeating sound like a 'd.d.d.d.d.d.d' that lasts a few seconds and then play the movie as usual.  When I reduce the video so it does not have the full screen it time very well provided that this is under a certain size.  When this product problem however it freezes the computer as even the mouse still motionless and then jump to a new location once the computer resumes.  I don't think that this is a problem with the CPU or everything that I tried to run several large programs and max on the CPU and it won't.  Sometimes, it will however while that a video youtube as well.  I checked my card graph and other drivers and they are all up to date, the only thing I found which could be the cause is Health Center says Windows "Intel Graphics Driver has stopped working" I tried using the problem solver is but there is not a solution for this and I reinstalled the drivers anyway and he's always done.  I don't know if this is the problem or not, however, like the date, he says that this problem has occurred does not correspond with me trying it to watch videos.  I would also like to add that this problem happens more frequently when I watch the movie then using VLC with windows media player.  A movie on VLC, I played was actually almost constantly, while Windows Media Player played the film very well.  Although, as I said, Windows Media Player still does from time to time as well and I tried reinstalling VLC and loaded a completely new player to see if it was her and she is always natural.  I have not downloaded programs that I could create a conflict either.  In any case, I'm at a loss and if this problem is not indeed my computer use normal it doesn't stop me from watching movies I really love so any help would be greatly appreciated thanks.

  Hello

  1. may I know the version of the Windows operating system you have? It's windows XP, Vista, Windows 7?

  2. you receive an error message?

  3. What is the RAM in your computer?

  4 is limited to a particular video format?

  I suggest the following methods and check if it helps.

  Method 1: I suggest you to put the computer in a clean boot state.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

  Method 2: the System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  To run a scan suite SFC as follows:

   

  How to use the System File Checker (SFC) to search for missing or damaged system files in Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: contact your factory of the computer to update the graphics drivers.

  For your reference:

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  http://social.technet.Microsoft.com/forums/en-us/w7itpromedia/thread/730e567b-9452-4645-ae1b-4102612b154e

• Satellite A300-1MT freezes from time to time

  Hello.

  My lay is old and only 3 days and the only problem is that it freezes every time.
  I use it on AC/high performance. I just work on it, and when I run the installation of a game it freezes usually, when sometimes I'm working on it, just browse the internet or write in word, it just freezes, did some stupid lines on the screen and that's it.
  I have to stop it by pressing the button for 6 seconds.

  I watched the temperatures. CPU is the GU of 60-65, 50-55 and HDD on 40-45 degrees. and when it's freezing, HDD Led goes off, all the others are bright white.

  Can someone tell me what to do? What is the problem?
  Should I take it back and get a new one?

  TNX

  Hello!

  It is not easy to say what is the reason for this problem, but I think this could be a problem of the RAM or the motherboard.

  In your case, I would check the RAM with Memtest86:
  [www.memtest86.com]

  Did you install the laptop with the Toshiba recovery disc or disc of Microsoft?
  Maybe reinstall Windows might also solve the problem. Try it.

  Good bye

• My task bar freezes from time to time.

  My taskbar freezes, especially when I try to change the volume.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important. Eventually the
  driver Sound, although the video/display driver and others may be part of the question, as well as the
  BIOS.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• W4 - 820 freezes from time to time

  Hello

  I just noticed that my Tablet Windows 8.1 W4-820 "freeze" sometimes: for example, the Metro UI maintains the response, but the rest of the applications take ages to open (email client, Internet explorer, the settings even). Meanwhile, it is hardly possible to start Task Manager to see is there any 'bad' running process.

  Anyone have similar problems?

  Hello

  Thanks for the point! I downloaded 1.16 drivers and installed. Setup noticed that drivers in a system "newer or the same ', but I decided to go ahead.

  Installation took literally about 40 minutes (very slowly - it was like PC becomes 100 times slower), but ended up with a few mistakes.

  Finally, I gave up and launched a full factory by Acer Recovery Management reset. Have no idea what has been a problem. Lets see how it will be after the reset.

• HP 15-5020ca omen: Omen HP 15-5020ca freezes from time to time

  Hello
  I have a problem with the gel for laptop. It happens every 15-60 minutes and it hangs for 10-15 seconds. During this time the computer does not respond. After this, he worked as usual until it happens again. In the system event log, there are still two events added after each move:

  Storahci, ID 129
  \Device\RaidPort0, restore the device, has been published.

  Disc ID 153
  The operation of e/s to the logical block address * for disk 0 (the PDO name: \Device\00000035) was retried.

  This occurs during normal use of the computer, which means opening some applications, watch movies etc.

  My laptop is guaranteed, so I contacted the service the customer of HP in Poland. After spending 2-3 hours on the phone trying to get help from consultants and to perform various actions such as reinstalling operating system, updating drivers, hardware tests, they decided to send mail and fix it by themselves. The first time, it took a week and the only thing they did was reinstall operating system... The second time they replaced the motherboard (at least they say, it has been replaced) and reinstalled the operating system. The problem still exists, and in my opinion they don't know what they are doing. After 4 months, faced with the question, I lost $2300, my patience and lots of time. Quo vadis HP?

  Help much appreciated.

  rach_clach

  Finally

  Do you have

  The new Bios F.32 REV: A SWITCH: 1

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72564.exe

  and UEFI

  http://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70869.exe

  installed?

• Virtual machine does not start after restoring from Time Machine to the new Imac

  I got my IMac replaced by Apple, after that they could not fix the old one.  They did a full restore from a Time Machine backup.  The virtual machine does not open now.   When I navigate to the file to try to open the virtual machine at the VMware logo in the bottom right of the icon displayed with large yellow exclamation appears on the icon?  Anyone encountered this problem before.  I'll take the Imac in Saturday if I can not solve.  The machine has the same size as before.  There are a few aspects of sharing with the Mac application miss me?

  According to the MacVirt.vmdk folder, you have the right number of segments of shared disk so you should be able to create a new VM by pointing to the disc in the new VM Wizard by pointing to the MacVirt.vmdk file.

  Note: After you create the new Virtual Machine, I would not suggest the Virtual Machine to stop, pause and close merge and then move all *.vmdk files in the package of the virtual machine, and then manually change the computer configuration files virtual .vmx and change the path to a little to view the MacVirt.vmdk file.  In this way, everything is in one package and is easier to maintain.

• S790 time freezes time freezes play freezes time freezes several times?

  Hello

  during playback of a disc, it started to freeze several times then play then freeze, then play every 1-2 seconds. Can not fix it.

  I tried another disc, and it's the same thing.

  any suggestions? Thank you.

  My S790 was purchased in December 2013:

  I solved this problem by unplugging the player from the power. I waited 5 minutes and plugged in and then insert it again. When I played my records, they do not have a problem.

• Firefox recently began freezing every time I have (a) try to open options (b) try to download a file (c) try to export bookmarks (d) attempt to move a bookmark

  Firefox last month started to freeze every time on a Windows 7 laptop, whenever I have try one of these measures. I tried 'refresh Firefox', safe mode, uninstall/reinstall, nothing seems to help. Cannot open prefs so I have not been able to disable hardware acceleration. However, I managed to set up Firefox Sync which leave me my favorites to another PC, and looks to make configuration changes on that PC affects this copy of FF, so I < think that > I also tried to disable hardware acceleration. Nothing works. Particularly frustrating that the options freeze. Firefox worked for years on the laptop touched, I can do except give up and switch to another browser?

  I downloaded and installed the 64-bit Firefox Developer Edition (40.0a2), using Sync to get my 32-bit profile settings. Options and file downloads work, hurrah!
  --Samedi 6/6: well, only the extensions I use are Adblock Plus and Flashblock and both seem to work well. I < not > enabled the multiprocessue option.

• Windows7 started to freeze on two computers after that microsoft sent an update to silverlight.these computers work a long time before the update.

  Windows7 started to freeze on my and my computer wives at the same time that it was after Microsoft sent an update for Silverlight down on 23/07/2014. These computers have worked very well for years without any problem. I tried to uninstall the update, but Microsoft has changed the name and number of the update and I don't know who it is. I don't understand why they are doing anyway. Does anyone else have this problem. Help, please.    hushpups Thank YOU.

  Hello

  Thank you for reaching out to us to Microsoft Community.

  Ideally, Windows updates from Microsoft doesn't cause problems with freezing of the computer.  Microsoft recommends that you install all the recommended updates and it protects your computer against potential threats, and it also maintains.

  The question you are faced to could be linked to corrupt Silverlight which can cause computer freeze if the associated Silverlight Windows Update are installed.

  To resolve this problem, I will ask you uninstall to clean up the corrupted installation of Silverlight and then reinstall Silverlight.

  To do this, please follow the steps described in the Microsoft Support Article below.

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  Also, I recommend that you turn on automatic updates. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Microsoft updates and optional updates are not downloaded or installed automatically.

  Activate the update or disable automatic

  Hope the helps of information provided. Let us know in case you need more help.

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!