Freeze/Crash and 0x800705AA on repair of the internet

Similar Questions

• I had a hard drive crash and had to move all the data again. Now, I get an error saying that my Visa is not an authorized version. How can I find the product key to reactivate?

  Vista Product Code question

  I had a hard drive crash and had to move all the data again.  Now, I get an error saying that my Visa is not an authorized version.  How can I find the product key to reactivate?  I don't have the sticker on the back and the software I have does not have the code?  I bought this laptop DELL at Best Buy a little more than a year.

  Thank you.

  Hello

  This problem may occur if you make a significant hardware change. See the link provided below.

  Error message when you start Windows Vista: "your activation period has expired".

  http://support.Microsoft.com/kb/925616

  If the OS came preinstalled Dell you may need to contact Dell technical support for assistance.
  http://support.Dell.com/support/topics/global.aspx/support/win7_support/win7_portal?c=us&CS=04&l=en&s=BSD

• At the office, InDesign works very well. At home, it totally crashes and all I get is the reel spinning death everytime I go near "file." Is there a solution? I can open a previous file or start a new popup tutorial, but if I try to approach

  At the office, InDesign works very well. At home, it totally crashes and all I get is the reel spinning death everytime I go near "file." Is there a solution? I can open a previous file or start a new popup tutorial, but if I try to get close to 'File' to place an image, he out craps. Is there a solution?

  reset your preferences -: https://forums.adobe.com/thread/526990

• I own Design Premium 5.5 but my HDD recently crashed and I don't have the CD to reinstall the suite. I have the serial number etc. Can I reinstall the suite without the CD?

  I own Design Premium 5.5 but my HDD recently crashed and I don't have the CD to reinstall the suite. I have the serial number etc. Can I reinstall the suite without the CD?

  I have the serial number etc. Can I reinstall the suite without the CD?

  Yes.

  Download CS5.5 products

• I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  See the following article:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  Make sure your network connection is working and properly configured.

  You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
   
  In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
   
  1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
   
  2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
   
  3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
   
  4. Select "Network adapters" under common hardware types, and then click Next.
   
  5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
   
  6. click Next and follow the remaining instructions.

• I am running Vista Ultimate 64 bit and in order to install the internet security package, I need to install SP2. Belongs to this normal windows update or do I have to download it from Microsoft?

  I am running Vista Ultimate 64 bit and in order to install the internet security package, I need to install SP2. Belongs to this normal windows update or do I have to download it from Microsoft?

  Windows Vista SP2 came out mid-2009.  You should have gotten a long time ago.

  How to obtain the latest Windows Vista service pack

• Cisco show and share to publish on the internet

  Dear Experts

  We have new deployment for Cisco SNS, and we publish SNS on the internet. I need help to do it and any recommendations, please.

  Thank you

  Richard

  Hi Richard

  Solve you your problem? I have to make sure of the following.

  1. you can access external SNS internally.

  2-natting is ok between IP Public & private.

  3. for the DNS record, make sure that the name must be the same on the inside & outside. For example internlly vod.bnp.med.ca and create a record public vod.bnp.med.ca should be the same FQDN, otherwise your SNS will never work. For authentication, you must publish the DMM.

  Note: your question this internal FQDN differs from the external FQDN of the SNS.

  Thank you

  Please note all relevant information

• When I try to convert a .pdf file to Excel, I have an error message 'no internet connection' and I'm connected to the internet.  Happen in different contexts of internet access.

  When I try to convert a .pdf file to Excel, I have an error message 'no internet connection' and I'm connected to the internet.  Happen in different contexts of internet access.

  Hi rhondas44981464,

  Try to use the export to PDF online service https://cloud.acrobat.com/exportpdf (Sign In using your adobe ID, in which you have the subscription).

  Kind regards
  Nicos

• How to run in offline mode and to avoid delays of the internet?

  I have many machines on a subnet that is unable to access the internet.

  When running the latest versions of the Adobe Reader software there are big break where the player blocks attempts to contact files.acrobat.com.

  What is everything you need uncheck on Edit/Preferences to avoid this pause.  I have already disabled the update, updates to certificate of trust and security setings for a server loading.

  Hello

  Please see the subject of the following forum once.

  How to run in offline mode and to avoid delays of the internet?

  Concerning

  Sukrit diallo

• Windows Vista constant freeze, crash and random reboot

  My Windows Vista computer is constantly freezing crashing (with blue screen) and sometimes restart automatically (and it's not because of Windows updates).

  I've had the computer for about a year and a half and it has been very good. Recently it started to happen. One thing I found out that there some registry errors and I tried to fix this, but the computer not work long enough.
  If someone could help me that would be great!

  Hello

  The issue could be caused or worsened by all these antivirus programs.

  You shouldn't have 2, still minus 3, antivirus programs on the computer
  at the same time even if they are not all running. They will be still responsible for pieces of
  themselves which can cause strange problems actually lower and your
  security that they will not interfere with each other.

  I uninstall McAfee and AVG and then run the withdrawal of their creator
  Tools to prevent the remains that can also cause strange problems.

  McAfee removal tool
  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  AVG removal tool
  http://www.Avg.com/us-en/download-tools

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

• Windows Explorer crashes and get this error in the event log: maximum number of ATI EEU session has been exceeded

  Windows Explorer crashes and it is what I have in my event log. Can anyone help?

  Exceeded maximum number of ATI EEU session

  Hi TodFranklin,

  1. when exactly you receive this error message?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 provided in the above article.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• Windows Vista crashes and displays a screen saying "the program does not.

  original title: crashing Vista

  Hello

  My Vista PC crashes. I think it has something to do with the screen saver, memory, HARD drive or energy economy. The accident appears as frozen screen and sometimes the program says State "program does not. I have tried different tricks like turning off screen saver, change the setting for power, HARD drive always 'on '... But no changes have so far resolved the issues.

  I was not able to identify a single application or function as the source of my problems...

  My Vista works very well, but if a leave as the computer and screen saver starts or the computer screen will energy efficient, it will crash when I "wake up".

  I've updated the system and all the applications and drivers, but the system is still unstable and cannot be left for an extended period of time before this crash. As long as I'm working on the PC all works. If I leave my PC, I have to turn it off.

  H. Hansson

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start your computer in safe mode, I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  To set up the computer in a clean boot, follow the steps in the link: How to perform a clean boot

  http://support.Microsoft.com/kb/929135

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method 2:

  I suggest you to see the link and check out the program does not.

  What does it mean when a program is not responding?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding

  Method 3:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  See also:

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• My Vista desktop crashed and I need to access the hard drive on USB. Permission is denied

  I have a desktop Vista raid 1 and raid system crashed.  I put a new hard drive and no Vista Recovery.  I put the old drive in an enclosed and when I try to open it, I get "you don't have permission to access this drive."  I have the passwords for the player but do not know how to access.  Any ideas?

  Hello lightly,

  Here are the steps to change the ownership and permissions:

  1. Right-click on the file or folder, click Properties, and then click the Security tab.
  2. Click Advanced, and then click the owner tab.
  3. Click Edit, and then do one of the following:

  · To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.

  
  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  4. If you want to take ownership of the contents of the folder, select the check box Replace owner of subcontainers and objects .

  5. click OKand then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder_name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.

  Note: folder_name is the name of the folder you want to take charge.

  6. click on OKand then reapply the permissions and security settings that you want for the folder and its contents.

  Additional remarks:

  • An administrator can take ownership of any file on the computer.
  • Affecting the ownership of a file or a folder might require that raise you your permissions using user access control.

    Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Lightroom crashes and unable to uncheck "use the graphics processor.

  Lightroom 6 worked as in a dream, just tried to work on a number of images and whenever I have cultivated an image that Lightroom is not responding and I had to force a stop down.  I use W8.1 64 bit desktop and graphics AMD HD 7700.  Research on responses that I checked the AMD software that is up to date, last updated Lightroom 6.1.1 (despite being selected automatically he hasn't had not updated itself) and then I tried uncheck the 'use graphics processor' as suggested by Adobe.  However, whenever I try to deselect the preferences box checkbox is not responding and I have to close the program.  Lightroom is now useless all that have done Adobe?

  See the instructions on the answer #3 here: Re: Lightroom CC freezes when the mode to develop

• I have Windows Vista and a Dell. Today, Windows automatically downloaded an update. Since then every time I try to use the search on the Web site, it freezes and I have to leave the internet and in some cases restart?

  Internet Explorer

  Hi Lee8772,

  Welcome to Vista forums.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) what version of Internet Explorer (IE) do you use?

  Method 1:

  You can try an optimization of the Internet. See the article mentioned below

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Method 2:

  I suggest you perform a system restore in safe mode. To log on in safe mode follow the steps mentioned below.

  Step 1:

  To use the safe mode option, follow these steps:

  1. reboot your computer and start pressing F8 on your keyboard. Select safe mode from the menu.

  Step 2:

  To perform a system restore follow the steps mentioned below.

  1. click Start, type system restore in the Search box , and then select System Restore in the programs list. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click choose a different restore point , and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  For more information, see the following articles

  Turn back time on your PC http://Windows.Microsoft.com/en-us/Windows-Vista/turn-back-time-on-your-PC-undo-system-changes-with-system-restore System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Previous versions of files: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/previous-versions-of-files-frequently-asked-questions

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.