Freeze screen for Satellite Pro P300 while watching the movie

My Satellite P300 keeps freezing when I am watching videos.
Can't even watch you tube gently or activity without intermittent freezing.

Any help on this?

Hello

Do you mean the portable computer system freezes or just the movie?
You need to restart the laptop then?

This happens with all files film or just watching videos on the internet?
Do you use the OS preinstalled Toshiba or did you install your own system?

Tags: Toshiba

Similar Questions

  • Satellite Pro P300 LED to the bizarre behavior

    I have a portable Satellite Pro P300-1AY, bought just for more than a year. A few hours before after saving my galleries of photos on my external hard drive, a function LED (located below the touchpad) began to blink once every 2 seconds and has done since then. I can't say I've noticed this before but maybe I'm a bit on the side hypersensitive and prudent? I've never had a system failure (yet) or any error message telling me that something is wrong in particular.

    Unfortunately I don't know quite what this led to specific standards for, no power supply mains or battery either. The hard disk activity? More likely.

    As indicated, perhaps I am worrying for no reason, but it's not something I picked up before and it doesn't seem to be anything on a Google search that describes something like that.

    I appreciate any comments on this one.

    Best regards

    Gavin

    Be cool and watch what happens the next few days.
    Let us know if the same thing will happen tomorrow.

  • Satellite Pro P300 - what is the maximum RAM I can install?

    What is the maximum RAM you can install in the PSPCDA-01L00D Toshiba Satellite Pro P300?

    It is not listed in the specifications.

    Hello!

    It seems therefore that the laptop is already upgraded to the maximum RAM.

    I think that 4 GB of RAM should be sufficient for all applications on a laptop at the moment. :)

    Good bye

  • Black screen on Equium A100-306 after watching the movie on external projector

    Hello!

    I have a laptop Satellite A100-306 and it worked very well. Yesterday, I plugged in a spotlight and watched the movie.

    Once I finished the movie I have turn it off and disconnected from the projector.
    After a few hours later, I tried to change my cell phone and found that the initial screen of charges until after there is nothing on the screen.

    I was able to go into the BIOS but couldn't go safe mode. I remember I used the key Fn and F5, but nothing comes so any help would be much appreciated.

    While the initial charge up screen I do not think that there is a problem on the screen or the graphics card the toshiba logo at startup.

    Can anyone help to know if tht is a hard drive problem maybe.

    Hmm for me it seems that the display was set ONLY to an external display device (projector, screen, etc.) and, therefore, you are not capable of anything on the internal display of laptops.

    I think you need to connect an external monitor or projector to this laptop second and must try to set display settings default (Mobile only)

    The FN + F5 combination should help you.
    As far as I know the laptop replaces the output of the screen in the following order:

    * Internal display * * (CRT) screen external + internal screen * * (CRT) external display only * TV (s-video output) + internal screen * TV only (output s-video) *.

    So maybe you have chosen the last device (output only s-video)

  • Replacing the screen for Satellite Pro L10

    The screen is cracked badly on my Satellite Pro L10. About how much can I expect to pay for a replacement within the United Kingdom. Is this something that I can wait to replace me with a screwdiver and some care?

    How much would a complete hull and the screen?

    Where can get me a - Toshiba service center my best bet?

    Hello

    The fact is that the screen of the laptop is one of the most expensive neighborhoods that are installed on the laptop.
    But unfortunately, I do not know what will cost repletion.
    This information you won't get form the Toshiba service partner in your country.
    I recommend you ask the service partner.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  • Win XP Display driver for Satellite Pro P300 PSPCDE requested

    After a fresh install of XP, I can not install a correct display driver (Radeon 5145).
    No driver is available from Toshiba Web site.

    Is there something else I could do?

    Please help - thanks!

    Hello

    To my knowledge, this graphics card is built in other series from Toshiba too.
    Satellite L500 PSLS9E
    Satellite L505 PSLS9E
    Satellite L550 PSLWSE
    Satellite L555 PSLWSE
    Satellite L630 PSK04E
    Satellite L650 PSK1JE
    Satellite L650D PSK1SE

    Satellite Pro L500 PSLSAE
    Satellite Pro L550 PSLWTE

    So try the fort of pilots has published the series listed above.

  • Qosmio X 770-127 screen changes brightness by itself while watching a movie

    Hello everyone.

    First of all, the English is not my native language, I'm going to do something to be as clear as possible, sorry if my grammar is not perfect.
    Please read this and help that you could provide.

    I just bought (a week) ago a QOSMIO X 770 - 127, I was seduced by its screen and player BluRa 3D, because I mainly want to watch film on it, to work (I am editor) or at home (I'm a viewer of the film).

    BUT there is something absolutely wrong here:
    While I watch a movie with windows media player or VLC, the file can be an AVI, MKV, QUICKTIME, DIVX or something else, even from a DVD or a BluRay Disc, the display changes during the film, let me explain:

    If the shot in the film is brilliant, the screen gets darker, that if the shot is dark, the screen gets bighter!
    It's really disturbing!

    I have not found how to cancel this option which is really annoying, we're supposed to be here to get the best way to watch a movie and the work of the Director of photography and colorist are not met at all!
    First of all, I checked in my option players (vlc, windows media, corel win dvd bd player) then none of them speak a brightness control changes automatically according to the displayed image.
    I check in the NVIDIA graphics card option and found nothing, even in windows tools and the toshiba software pre-installed with the PC.

    So please, help me in solving this problem! Maybe I missed something in all the places that I checked, but this kind of option must be accessible in a way... I hope at least!

    Thank you very much for your help.

    Hugo.

    themselves. [email protected]

    Data sheet: 64-bit windows 7, the ONLY thing I installed is vlc media player, so please, don't tell me to re - install windows, my computer just out of the factory. Thank you

    The phenomenon described above occurs with battery pluged on electricity or disconnected, with or without the eco mode.

    Post edited by: Hugo_1

    Driver display means that the graphics ;) driver
    The European driver Toshiba page provides two drivers of graphics cards:
    A v268.51 from nVidia and the other a modified by Toshiba v8.15.10.2353
    Please check them both!

    But to be honest I have never heard such display the question and it s don't know for me that any software would change the brightness based on the content of the film.

    Have you set the brightness of the screen to the max using FN + F7?

  • Need new screen for Satellite A85: laptop that has the same screen 15 ''?

    Looking for a new screen for this laptop and I was wondering what laptops use the same screen or the screen that fits?

    Fit the toshiba a30 screen? or should it be a 15 xga screen? There is a standard 30? will also be an adjustment of lcd a60? and if it would be an a60 housing also correspond to the screen? help please?

    required screen really, just need standard tft works ok?

    Hello

    Satellite A85 is unknown to me but to my knowledge the A30 has been delivered in different views:
    15.0 inch, screen SXGA 1400 × 1050 pixels.
    15.0 inch XGA, 1024 × 768 screen pixels

    I think that this view could be compatible with the A85, but maybe the display resolution is a little different.

  • Slow start for Satellite Pro P300 P

    My P300 has a slow start and takes forever to exceed the windows page. Any help on this?

    Hello

    My laptop starts slowly because I had too many processes running in the context of the BONE.
    I disabled it in msconfig.
    I think you should try this too.

    In addition, you must update or remove tool TEMPRO.

    Check it!

  • Satellite Pro P300 heating to the point of combustion

    My laptop heats so below that burned my leg. Any ideas, what is the best option for this?

    I can still hear the fan working, but I can't think it might be.

    To be honest I n know not what you are with your laptop and why your laptop is placed on your legs/legs. Is it really uncomfortable for its use? ;)
    In any case, I assume that you want to use your laptop on the couch or elsewhere using the WLAN connection. Am I right about that?

    I put t think you will burn your leg but what can happen is that you will burn laptop s mainboard.
    Satellite P300 is big laptop 17 with powerful hardware that needs to be cooled correctly.
    I guess your blocks to leg cooling ventilation downstairs and material temperature reached a critical level fast enough and you can feel it on your leg.

    In my opinion there is no reason to panic. All you have to do is to take care of your little toy and use it on the right way.

    Good bye

  • Satellite Pro P300 - lock when the battery power

    I have a Satellite P300 and facing an intermittent problem where keyboard and mouse lock up when battery-powered, it doesn't happen when running on the grid. The screen shows many lines top when this happens.
    I use mobile broadband [prepaid 3], but I don't think that's the rub.

    Can anyone help? PADI.

    Hi padi.

    This s really strange question...

    More details on your laptop would be interesting. You use the pre-installed Windows version or you have installed another OS?

    Theoretically, it could be a hardware malfunction or software/driver problem. In a first step, I would reinstall Windows using Toshiba recovery disc.

  • Satellite Pro P300 keypad at the same time as the alphabetical keyboard?

    Hello

    I'm new here, and English is not my mother tongue, so be indulgent ;-)

    I have a problem with my keypad.
    It is not possible to make it work at the same time as the alphabetic keyboard.

    When I press NumLock to make it work, there also change the alphabetical keyboard into digital.

    Example: numlock on uiojklnm, = 456123n0,

    I have a QWERTZ keyboard.

    Thanks for your help
    see you soon
    Val

    What model of laptop do you have?
    You update the BIOS?

    If not, try most of the problems can be solved by the BIOS updated!

  • looking for something in 'comments', while watching the radio on the internet.

    I am baffled by the search routine. How to run the routine to search the text on the screen below is - a? If I'm on page Internet Radio, News / Talk, I want to search comments. The results enter a word in the search bar and then give me the choice of my library or iTunes Store.

    S

    stephen11962 wrote:

    I am baffled by the search routine. How to run the routine to search the text on the screen below is - a? If I'm on page Internet Radio, News / Talk, I want to search comments. The results enter a word in the search bar and then give me the choice of my library or iTunes Store.

    S

    To search only within the playlist is displayed, make sure that "entire library of research" is not selected, as shown below.  If it contains a check mark, click to remove.

  • Satellite Pro P300 - screen remains blank after power on

    My Toshiba Satellite Pro P300 power on, the screen remains blank.

    Can someone please help?

    Looks like a FL. inverter problem
    I doubt that you could replace is it s a job to a service technician.
    The FL Inverter control the backlight of the screen and if it s faulty, you will see everything as behind a thick fog

  • Satellite Pro P300 - how to get the original without media image?

    Hello

    I received a Satellite Pro P300 and there the for win xp recovery disk, I would go back to the installation of Vista pre installed if possible.

    The recovery on the hard disk partition is not available, so I guess, that it cannot be recovered. Is it possible to buy an original image?

    Liam is just that Win 7 is better than Vista OS.
    So if you have the ability to install Win 7 I recommend doing this instead of Vista.

    However, the Toshiba recovery disc contain only the Vista OS.

Maybe you are looking for

  • readabilityO

    On xp it with spell check and thesaurus, there is a section with the number of words that shows the readability of a written section: However, under windows 7 I can't find something like. Can help you because it is a great and useful tool.

  • L530 with Centrino 6205 - 5 GHz 802.11n-compatible?

    I have L530 with Centrino Advanced - N 6205 built-in wireless. The computer does not see a network n I installation (2.4 GHz or 5 GHz). When I get the properties Advanced adapter centrino, mode 'Wireless' displays only the options of a/b/g and n not.

  • Wireless - problem with the integration of MAC printing

    Hello world. Just bought a Macbook pro and can't seem to recognize my printer. Network devices: -Router Belkin WLAN -MFP HP Laserjet CM1312 - with HP 2101nw Wireless G (printing and scanning even works fine without thread!) -Acer laptop with XP Home

  • No software available for HP Deskjet 2050 All-- One Printer - J510 in in windows 8.

    Product: Printer all-in-one HP Deskjet 2050 - J510 Operating system: WINDOWS 8 Problem: Software for windows 8 was not available on the HP site and the software CD is in error. Error message: Corrections system. Changes to the system: My operating sy

  • Thread.Join () does not work

    I did a media player, and I use a database to store data, after playing a song for a while, I store the current position in the Pb, so I can continue to play the next time. I use a thread to update the db, so that he can play the next song at the sam