Freeze Windows 7 with VirtualBench

I am running Windows 7 in a Virtualbox (Oracle), Linux. (Ubuntu).

We use in the Enterprise edition of Windows 7 Enterprise.

Installed Virtualbench - edition offline application.

After activating the VirtualBox than the Virtualbench NOR is USB devices connected, the application works. It shows the signal from noise or oscilloscope, multimeter voltage test.

As long as I do not support any menu or another function with the mouse, he continues to work.

Clicked on and 5 seconds later, Windows 7 has been "DEAD". He wasn't dead 100%, the mouse still moves. But any action, either by a mousclick or by pressing 'Alt'-'Tab' had no effect. By pulling the cable USB not working anymore.

Interesting was that in the Gnome System Monitor, 1 CPU (on my 4), ran also use at 100%. Seems he was the virtualbox loading the CPU.

I didn't spend a lot more time to study, because it is quite laborious to repower the machine.

What can be done to fix this?

jhorvat wrote:

I am running Windows 7 in a Virtualbox (Oracle), Linux. (Ubuntu).

We use in the Enterprise edition of Windows 7 Enterprise.

Installed Virtualbench - edition offline application.

After activating the VirtualBox than the Virtualbench NOR is USB devices connected, the application works. It shows the signal from noise or oscilloscope, multimeter voltage test.

As long as I do not support any menu or another function with the mouse, he continues to work.

Clicked on and 5 seconds later, Windows 7 has been "DEAD". He wasn't dead 100%, the mouse still moves. But any action, either by a mousclick or by pressing 'Alt'-'Tab' had no effect. By pulling the cable USB not working anymore.

Interesting was that in the Gnome System Monitor, 1 CPU (on my 4), ran also use at 100%. Seems he was the virtualbox loading the CPU.

I didn't spend a lot more time to study, because it is quite laborious to repower the machine.

What can be done to fix this?

There are two options:

  1. Try to use WiFi instead of USB.
    To configure WiFi settings, you can either use VirtualBench or MAX. Because the application VirtualBench is in your virtual machine, you can either try to use MAX or use a native Windows operating system and application VirtualBench.

  2. Use a native Windows operating system.
    USB support for products NOR on the VMS is very dependent on the device OR the host operating system and virtual machine software. Each combination gives different results, while network devices are more reliable.

Products OR are supported on Virtual Machines (VMS)?

http://digital.NI.com/public.nsf/allkb/31B0985265CA167886257831003F5536

Tags: NI Products

Similar Questions

  • Toshiba controls freezes Windows Explorer on Satellite L350D

    Hey guys, my Toshiba controls (Mute, play, stop, next and forward) buttons literally freezes Windows Explorer. I'm not 100% sure if there is a driver that comes pre-installed, but if there is then could someone point me in the right direction on how to fix this?

    Also, if it helps I have my folder 'TOSAPINS' containing all the programs that came pre-installed with my laptop.

    Thank you for your support.

    Hello

    Do you mean that your internet explore crashes by pressing control buttons Toshiba?
    That s strange.

    Never heard talk about this issue, but as you know nothing is impossible using the Windows OS ;)

    However, I recommend the update of the OS and the cleaning of the operating system using CCLeaner (free software).
    In addition, you could reinstall the package of value added because this package contains applications that control buttons of Toshiba.

    Good bye

  • Programs to freeze or close with and without notice.

    programs to freeze or close with and without notice, that it is not a difference if I'm on the internet or not.  I am constantly notices that a certain program has stopped working and will try to restart.  Sometimes it will be and sometimes not.  Sometimes I also get opinion that something or another can be read at 0xxxxfffff or something like that.  I had these problems all the time I've had this computer.  I tried everything I can think of to fix it without success.  I had my provider ISP here at least three times, I returned the computer to the gateway and had replaced ethernet card, I ran several other registry fixing programs, I've updated all the drivers, I rebooted windows program and started from zero to three times, I took the CPU back instead of purchase (new) they said they could find no problem.  Please help me, I want so badly to take this computer at the door, but I can't afford something different.

    Hi Cherarose,

    I suggest that you contact the manufacturer of the computer and to update the drivers from the chipset and updateBasic system of input/output (BIOS) to the latest version, check if this help.

    BIOS: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

    Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Optimize the performance of Microsoft Windows Vista

    http://support.Microsoft.com/kb/959062

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • No sound in Windows 7 with Boot Camp 4

    On a Mac Mini 32-bit running Windows 7 with Boot Camp 4. I use this set to the top due to other software, I need that requires 32 bits.  There is no noise from the CPU itself, no making helmet. I get the Mac sound at the start of the central unit, then Windows starts normally.  On the Device Manager in Windows two audio devices are: high definition Audio Device and display Intel. The State of the device on these two said they operate both correctly. I have an another Mac Mini that the sound is not working properly, and there a Cirrus S4206B. I tried to find how to add this device and driver for the CPU problem, but in vain.

    The audio works normally on the side of OS X?

    Check if the analog-to-digital composite on the mini has a Dim red light.

    Run msinfo32 on the side Windows and after return your BIOS setting.

    In Device Manager, click view and enable devices show hidden. See all device Cirrus?

  • Installation of windows 7 with bootcamp

    In discussions with Apple Support technicians, I was led to believe that the MacBook Pro machines supported Windows 7 and above. However, when trying to install Windows 7 with Bootcamp Assistant, I learned that Windows 7 is not supported and I must have Windows 8 or higher.

    Is there a work around? Or do I have to get a license of Windows 8?

    For BootCamp, there is no work-around: Win8 or Win10 are your choices. However, such as Parallels Desktop virtualization solutions can run any version of Windows and can be a viable solution for you.

  • I can't connect to my surface 3 running windows 10 with my i phone 5 hotspot.

    I can't connect to my surface Tablet 3 running windows 10, with my phone I 5 personal reactive.

    Can you check with other devices if the hotspot works otherwise OK?

    Won't be "passing the ball", but it might be worth your effort to try to get support on this issue on the forums of MS Surface support...

  • Clean install Windows 7 with UEFI in dv6-7215nr

    Hi, I would like to do a clean install of my HP dv6-7215nr Windows 7 Enterprise SP1 x 64 envy laptop.

    To this end, I have 3 questions to solve some installation issues.

    1. What are the steps to clean install Windows 7 SP1 Enterprise intact in UEFI mode?

    I tried to install Win 7 after the pre-requisites following:

    (a) not partitioned 200 GB free space on the disk (only 1 physical disk)

    (b) already installed Windows 8 files with UEFI

    (c) UEFI enabled

    (d) heritage disabled startup

    (e) secure boot disabled

    When I Boot in UEFI of CD/DVD, I can't switch to the Windows startup screen, it just hangs. What I am doing wrong? Is there any other prerequisites that I don't know?

    I tried to install UEFI with Legacy enabled Boot, and I installed win7 but I can't disable Legacy new Boot because Win7 boot and I want only the UEFI Boot and need for inheritance disabled.

    2. where can I download drivers for Windows 7 for my laptop?

    I found this topic:

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-envy-DV6-7210ei-downgrade-fr...

    They point to these drivers

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lc = in & product = 5273735 & task = &

    I think I could use these drivers, but I need just in case where. I guess they should work as the product names are roughly similar (with mine).

    3. is it possible to Secure Boot with Windows 7 SP1?

    I have no research on this so far.

    Thanks for the help that someone in the community can give to me, it is not important all the problems that I have set in I can still do research on questions 2 and 3 and help others with my research if I can do it before a response. Any info you can give me will be too great.

    Carlos

    (1) ' secure Boot' must be DISABLED and 'Legacy Support' must be ENABLED to install Windows 7 and many other older operating systems. The bootable media must support UEFI boot to install on a GPT-partitioned drive.

    You let people with DISABILITIES 'Secure Boot' (and 'Legacy Support' ENABLED) once you have installed Windows 7. Changing these options causes Windows 7 to start is no longer.

    (2) the Windows 7 drivers on the CTO Entertainment Notebook PC drivers HP Pavilion dv7t-7000 page you referenced, will work on your computer.

    (3) it is not possible to install or use Windows 7 with "Secure Boot" ACTIVE.

    WARNING *.

    HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP cannot provide the drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

    Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

    You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the 'Configuration of the BIOS start-up secured' on the page parameters below, until you try to install Windows 7.

    In addition, as the hard drive is probably partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" or "UEFI - USB Flash drive" options in the boot menu "F9". If "UEFI - CD/DVD drive", "UEFI - USB Flash drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

    I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

    If you have missing or unknown devices after installing the drivers, please post to the "Hardware ID" Device Manager (just the text string will do) to these devices as shown in the example below.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Satellite Pro M10 freeze and crash with some programs

    Hello

    I have a M10 Pro Satellite...
    A few weeks ago it's freeze and crash with some programs like wmpayer, messenger... I delivered to the authorized agent and they had not detected any problems.
    Already I have formatted several times, but the problem persists.

    Any idea what this may be?

    Thank you

    Hello

    For me it looks like you might have a motherboard problem. Formatting removes the chance that it is a software problem. Try taking 1 stick of RAM and test with it. If she continues to crash, remove that stick and try it. If she does it with the two RAM then those who are ok. HARD drive is not the culprit, so now he could either be processor or MB. Find a program to measure the heat from the laptop and run some heavy programs do overheat. If the temperature goes up and then it crashes, it could just be overheating. If it continues without overheating you either have a CPU or MB problem. I hope this helps.

  • Satellite Pro A300-28R - Windows startup with a wrong display resolution

    OK so I have a Toshiba Satellite Pro A300-28R with Windows 7 64 bit and an ATI Mobility Radeon HD 3470 graphics card.

    Recently, I have connected my laptop to a TV using the S-video connection. It worked well. The problem is that since then, and every time I start my laptop Windows starts with S-video of 600 x 800 display resolution.

    I tried changing the settings in the Panel and using the ATI CCC, having once selected and applied these settings, but whenever Windows starts now it starts with the above display resolution.

    As a result, I've also uninstalled and reinstalled my display driver both package Toshiba value added but the same problem persists. I searched with Google about this problem and have not been able to find something useful.

    Any help would be greatly appreciated.

    Hi dude

    How did you produce the video signal?
    Did you choose Office expanded or all simply the option external monitor by using the FN + F5?

    I think that you need to press once more the Fn + F5 and should switch to a view, internal laptop display.

    Please check if this could help you!

  • Satellite M30x - bootsequence Windows XP with blue screen

    I have the following problem: I have 2 different Satellite M Series notebooks of performance!

    The problem, that I wonder happens 100% of the tests, but after turning on the computer laptop and after the bootsequence - at the present time, that the windows XP logo appears - the system halts with a blue screen. Turn to restart and falls into the next blue screen.

    The only thing I discovered is that XP regularly also begins long switch WLAN hardware is turned OFF as soon as I turn this switch with Windows, the blue screen occurs immediately and the system runs out of oil.

    is that what is anyone able to help? -new review of pilots or any other solution to the problem would be appreciated!

    Hansjoerg

    Hey,.

    Congratulations, you have already found the problem! :)

    From my own experience, I can tell you that the same thing happened to a friend of mine. So he replaced the WLAN card with a new one and the problem has been resolved! Windows starts with WLAN turn on () correctly!

    What WLAN card is installed on your laptop?
    In Satellite M30x of my friend a WLAN Wireless Intel 2200 card has been installed. He bought a new one for little money on eBay and replaced it yourself because it s not very delicate.

    So take a look on eBay or other places. You can also ask a maintainer approved assistance if you are not familiar with the disassembly of the laptop.

  • Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

    Is it possible to install Boot Camp and use window only with an external hard drive, so it doesn't take much space on my Mac?

    No. Windows cannot be installed on an external drive, or start from a.

  • I can't activate Windows Vista with product key OEM Toshiba - key is bad

    I can't activate Windows Vista with OEM Toshiba product key (the key is wrong). What should I do? Steaker from the bottom of the laptop key

    This key belongs to the preinstalled Vista. It's an OEM key and generally it doesn t work with other Vista OS.

  • Satellite A100-225 keeps freezing and crashing with the new HARD drive

    Hi all

    I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

    I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

    I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

    Thank you

    Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
    In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

    I can't say for sure, but there must be a compatibility problem.

    Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

    Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

  • Satellite P20: sometimes Windows boot with no sound

    Hi all!

    I have a problem with the sound on my Satellite P20, WinXP SP2. (Realtek AC97 audio)
    'SOMETIMES' Windows startup with no any sound!
    (Sometimes means that 3 to 5 days is Ok only...) I have all new driver and the latest Bios (v.2.10) installed, but without
    all resoultes! All I have to do is restart my computer and the sound works!
    In "Device Manager" is always all corect but still no sound.
    Is it a software problem material oder?
    Several months ago, I bought 2 memory card Kingston ddr333 so 512 MB (recognize in 1022 MB BIOS in Windows 1024Mo) and
    Module Kit Bluetooth PA3235U-2BTM. Is it possible that the memory or bluetooth module are not compatible with the motherboard... ?

    What is the problem and how to fix it?
    Thanks in advance and sorry for my English very poor!
    Dejan

    Post edited by: DejanH

    Hello

    What doesn work sound t? Only the operating system Windows sound doesn t work or also you don t have the sound output if play you CDs or watch DVDs?

    To me it looks ;) entries damaged registry and/or files of the OS.
    What about the new operating system installed?

    It would be very interesting to know if it happens on the new OS installed since the Toshiba Recovery CD.

  • Cannot update iTunes on Windows 7 with Apple Software Update

    I use Windows 7 with Boot Camp and I'm trying to use Apple Software Update to download the 12.3.2 version of iTunes. It gives me a download bar, but said only: "download (0.00/37.90 MB) and remains static and won't actually download anything.» Any ideas?

    Just download.

    -> https://www.apple.com/itunes/download/

    In addition, you must run the update software for your Mac OS.

Maybe you are looking for