freezes on Hp IPISB-CH2 with the new installed graphics card BIOS

Similar Questions

• Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  MacBook details below?

  Model: MacBookPro11, 3, MBP112.0138.B15 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports

  Serial ATA Device: APPLE SM0512F, GB 500,28 SSD

  USB device: Memory card reader internal

  USB device: USB OPTICAL MOUSE

  USB device: HUAWEI Mobile

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: Apple keyboard / Trackpad

  Bus crush: MacBook Pro, Apple Inc., 17.1

  Thank you

  gis_abc

  

  He seems to show NVIDIA graphics card.

  Kim

• New installed graphics cards makes beep sound and no response from the monitor

  Hello.

  I have a hp pro 3300 micro Tower. I installed a new card from nvidia quadrophonic 420 graphics.

  When I start the pc I hear 4 beeps and then nothing. The screen is blank

  eager to help

  D

  Hello:

  4 beeps is a problem with the power supply.

• Satellite P100-160, not compatible with the latest games graphics card

  My laptop is the Satellite P100-160, which has a 945GM Express chipset is not able to play the latest games. I understand that the graphic card cannot be replaced. So, which eliminates this option...

  Recently, another solution I've heard of is an external graphics such as the Asus XG station...
  http://www.Trustedreviews.com/graphics/News/2007/01/15/ASUS-makes-first-external-laptop-graphics-card/P1
  either this...
  http://www.coolest-gadgets.com/20070611/MSI-luxium-offers-external-graphics-solution-for-notebooks/

  However these devices large need an express card slot, which I'm not sure that this laptop has even?

  If it's not there ways to add to my laptop? And if not, what other options are available to me that may help my laptop to face the latest games?

  Thank you

  Richard

  Hello

  The Intel graphics card is simply not powerful enough to handle the latest PC games.
  You think so, why all the hardcore gamer don t buy computers laptops, but during the CPU clock and buy new graphics for PC s Office cards?

  The laptop is not comparable with the desktop PC. It's just different technology according to the limitations of hardware upgrade on your laptop, you can spend only the HARD drive and RAM.
  You cannot add also all other ports for laptop. It is not possible :(

• problem with the asus HD5570 graphics card

  computer just freezes and becomes unusable despite install and uninstall the latest software and drivers asus and amd.

  The motherboard is an asus P5RD2-TVM/S

  667ram (2X2GIG)

  Graphics card is an asus EAH5570 GPU. 1gig ddr3 Directx 11 and opengl 3.2 support

  I bought this card a couple of years ago and only just opened the box that allows the disk installation and all sorts. Not extremely loud fans all the time will not upwards or downwards, then it crashes right especially when on the internet, no matter what browser. I am really confused and don't have a clue what the problem might be apart from being incompatible with the motherboard.

  Any input is greatly appreciated.

  Thanks in advance

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. the computer froze before installing the graphics card?
  2. have you made any changes to your computer hardware or software?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Difficulty of Windows system performance slow computer problems
  http://support.Microsoft.com/mats/slow_windows_performance

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Optimize Windows performance
  http://Windows.Microsoft.com/en-in/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please also check the compatibility of the graphics card with Windows 7 in the Windows Compatibility Center
  Refer to this article:
  Windows Compatibility Center
  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  See also:
  8.1 Windows, Windows 8 or Windows 7 hangs or freezes
  http://support.Microsoft.com/kb/2681286

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Latency problem Satellite U500 - 1DZ CPD with the geforce 310M graphics card

  Hello

  I have a problem with a DPC latency caused by the driver of NVIDIA card.
  I use my computer for audio and it is really not possible to work.
  chart with geforce abled:
  http://nsm04.casimages.com/IMG/2010/09/22/100922123519210586795529.PNG

  When I turn off the graphics card:
  http://nsm04.casimages.com/IMG/2010/09/22/100922123519210586795528.PNG

  Please give me an answer.

  My computer is a Toshiba satellite U500-1DZ, intel i5
  Thank you

  Hello

  How about driver sound, display driver and BIOS update.
  Have you tried that?

  To be honest, I don't know if this could help you or not, but if an update is available, then you should do this

  You said, audio performance is best when the GPU is disabled
  It chip NVidia s then maybe you should take a look in the nVida forum in order to get more details

• 550-142d Pavilion: the change of graphics card BIOS update

  Hello

  I have a Pavilliion 550 - 142d I want to update to provide a better gaming experience. The map pre-installed in the Pavilion is 730 GT that does not happen at the end of game.

  The graphics card, I intend to buy is the GTX950 or GTX 1060.

  I did the necessary research on upgrading the graphics card.  But I discovered only recently that I need update the BIOS when changing the GPU.

  What are the precautions or steps I have to take in what concerns the updated BIOS to support the new graphics card?

  I just finished replacing my PSU 550w successfully today. The only problem I encountered was that I didn't have a slim-SATA to power the built-in DVD player. I intend to get an adapter SATA slim finally.

  I will proceed to the graphics card vendor soon, please advise me on the supported BIOS I knew HP has an integrated program to monitor and update a driver accordingly. As such, I worry if the GPU card support is in place. Currently, I don't have any other NVIDIA program installed to update the GPU card.

  Thank you.

  Hello

  Thank you for your concerns.

  I raised my BIOS to version A0.13 (Dec 2015) and the latest version is A0.16 (August 2016).

  I need to update the BIOS before or after changing the component?

  As I predicted to change the GPU, my only question is if I have a correct display of the monitor if I were to run the update after the upgrade. Please notify.

  Thank you for your help.

  Concerning

• Blur bug: is it just me or everyone with the OpenCL/Amd graphics card?

  When I use blur effect as "Accelerated blur", "'Gaussian blur" or "Directional blur", if there any blur on a horizontal line, the preview is displayed as a mess. "

  It's so hard to describe so I get some screenshots.

  First of all, it is a no - fx sample:

  

  And it is a directional blur sample, notice that the meaning here is '0', means that it is "Vertical blur" now:

  

  Here's a problem. When I changed the Direction of 0 to 90, the preview looks like a TV noise:

  

  Close to 90 degrees, the line more mess that I receive. Sometimes it green or white, blue, perhaps.

  Also, if I take fuzzy Gaussian or fast blur and assign "Blur dimensions" 'Vertical' and 'Horizontal', the same result I get. (maybe worse)

  So I would like to know, is the problem just me? Any solution?

  CPU: AMD 1090 T.

  MB: Gigabyte 890fxa-ud5

  RAM: 16 GB

  GC: ASUS A7 260 X 2GOC

  Just updated: talked to Adobe.  They confirmed with AMD R cards topical issues.  They are working on a fix.  No ETA on the update.

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• WITH THE NEW UPDATE 10/11, 5. I CAN'T DOWN LOAD SONY PLAY MEMORIES

  WITH THE NEW SOFTWARE UPDATE, I LOST ALL MY MEMORIES OF GAME FROM SONY PICTURES. WHEN I REINSTALL THE PROGRAM FREEZE CAN YOU HELP ME PLEASE. I LOST ABOUT 23 000 PHOTOES AND 132 VIDEOS

  Just a friendly advice: do not post in uppercase.  It's the Internet equivalent of screaming at people.  Now for your problem. has this program works well before you update for 10.11.5?  You have a Time Machine backup from before the update?  You have backed up by photos/videos on an external drive?

• What can I do to make the Satellite A665-S6086 run with the new memory?

  I was able to update the BIOS for my Satellite A665-S6086 by updating 2.30 on CD burning. I have Windows 7 64 bit. I needed to update the BIOS, because I upgraded my RAM/memory of 2 GB (4 GB total) two cards two cards of 4 GB (8 GB total).

  My question now is when I start my computer with the new RAM/memory (two cards that are KTT-S3BS / 4G Kingston DDR3 1333 MHZ SODIMM SGL RANK), it freezes on the screen from Windows startup. Then when I hold the power button to shut it down and restart it, it wants to start using Windows repair but then crashes again. When I put in the memory of the old man and he start up, it starts the Windows repair and runs normally.

  What can I do to make my computer run with the new memory?

  I thank very you much in advance!

  What you can do?
  Buy an another RAM modules that are fully compatible with the laptop.
  It seems that you want to use the RAM modules which are not totally compatible and therefore the system hangs.

  By the way: the CPU that is used in this notebook runs the DDR3-800 and DDR3-1066
  RAM modules.
  http://Ark.Intel.com/products/49020

  I would not recommend to use the modules of DDR3-1333 but PA3677U-1M4G 4 GB DDR3-1066

• H8 1241: problems with the new video card on h8 1241

  OK, I've seen a lot of posts on this topic, but I couldn't find anything yet. I bought this computer as a windows 7, but have just upgraded to windows 10. The stock video card HDMI port came out, so I ordered an ASUS Geforce gtx 750ti to replace.

  http://www.Amazon.com/GP/product/B00IB9P1KG?PSC=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

  When I try to boot with the new card I get the blue screen that tells me to Press esc to get into the BIOS, but it is freezing it (I am not able to get into the bios).

  Currently, the only way to make changes are re - insert my old card. I can not even start without secondary card by using the on-Board (which could as a result of the changes that I made in the BIOS). Most of the solutions I've seen involved changes in version 8 of the BIOS but I can't get that. I tried to update my BIOS to the latest version for windows 7, but I don't think it worked b/c I am on windows 10 now.

  Help, please!

  Hello

  The level of your PC motherboard BIOS is not compatible with the cards NVIDIA GXT 7xx series.

  Contact ASUS to obtain redress. ASUS has maybe a video BIOS update or a different graphics card that will work in your PC.

  A NVIDIA GTX 660 new or used may be your best bet.

  Thanks for posting on the forum.

• HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks

  HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks

  try to download the latest driver Package HP from Apple here:

  http://support.Apple.com/kb/DL907

  Install the package.

  Reset the printing system.  And add the printer with the new driver.

  Try to perform a "reset printing system" on the Macintosh and then reconnect to the printer.

  To reset the printing system do the following:

  1. open System Preferences
  2. click on Printers & Scanners
  3. right click or control click in the list box for the current print queues.
  4. Select the Reset printing system...
  5. enter admin user name and password
  6. restart the Macintosh
  7 try to set up the printer again

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• I had a problem with my iPad 2 Air when I changed my Apple ID password, the problem is, it shows me a Massage says ENTER the PASSWORD, and then said your PASSWORD will be used when the signature with the new device, but when I but the code it shows fail m

  This problem happened to me and it belongs to iCloud and I have used so important, please can someone help me?

  Hello. The access code on your iPad is the code four or six numbers you will need to enter to unlock the device. It has nothing to do with the verification of your Apple ID or two-step. Are you able to unlock your phone? If you are, then please describe the steps that lead to your problem. Since you have changed your Apple ID password, you will need to go to two settings > iCloud and settings > iTunes and app store and sign out of your Apple ID, then connect back with the new PW.