Freezing of trackpad ES1 - 111 M

Similar Questions

• Acer aspire ES1-111 questions

  Hi all

  I decided to enroll in this community to get some tips and reviews the problems I am experiencing with this laptop. I own an Acer Aspire ES1-111 I bought a week ago.

  Since its first configuration, I noticed problems using it with windows 8.1 (its native operating system). For example, touchpad or keyboard not working not properly and, especially, shutdown problems. In this case specific I could never stop the device correctly, because he remained with the power indicator which continued into 'works' although it seems that the system is freezed was arrested. However, in order to really stop I had to press the power button / stop.

  First of all, I decided to reset the system with built-in software eRecovery but problems remain.

  Secondly, I decided to do a clean install of the operating system and I tried the two Windows 8 and Windows 8.1. In both cases, installation process complete without problems, but when you try to install all the drivers, I experienced freezes and once again the shutdown problems. I followed an order to install drivers (Chipset first, only VGA, etc), but in most cases, I had problems of supra. I also tried to disable "Fast start (recommended) turn" without success. 

  But now comes the strange part.

  I finally decided to give it a try for Windows 7 and, to my surprise, everything works fine! I was able to install the drivers correctly and to stop or restart my laptop without a problem. Now I use Windows 7, but, as it is under warranty, I would ask you what you think of this questions.

  I find it quite strange that a laptop does not properly with its native operating system but it is very good with an older operating system! Do you think I should send to Acer support or ask to change it (although, I don't know if I'm still able to pursue this second option).

  Thanks for your attention!

  MIC

  I think I found the reason why I was unable to run Windows 8.1 smoothly after a new installation. I tried to install it during the configuration of the Bios in LEGACY mode, which is good for the BONES before Windows 8 (like Windows 7, as it was working perfectly) but not for Windows 8/8.1 as it probably some issue when install drivers etc.

  So I decided to reset the Bios original UEFI mode. It was the right decision. Not only touchpad was recognized well when loading the USB bootable (expecially since the Touchpad has been on "Advanced", which in legacy mode, would not work), but also because, when the operating system installation process has been completed, I was able to install all the drivers hardware properly and stop/restart of operations fully worked without problems / freezes and so on.

  Hope this information is useful for other users.

• Acer Aspire ES1 111 M cannot install windows 10

  I can't update my netbook. During the Windows Update 10 WHEA 8.1 (blue error screen) error message and 8.1 windows is reinstalled. I tried several times with different USB drives external used to expand the capacity of the system.

  Clean Windows 10 installation works, but I cannot activate Windows 10.

  I have regular broadcasts with the WHEA error. It was resolved by the CPU power reduction to 95%.

  The Netbook is Acer service already, but the WHEA issue has not been resolved.

  I think back again.

  It does not resemble your ES1 111 M is on the birthday list.

  http://www.Acer.com/AC/en/us/content/Windows10-update#_ga=1.178858663.264310007.1474604665

  You can read my messages in the link below to get the previous version of "November" of Windows 10 ISO and create with rufus USB installation media.

  http://community.Acer.com/T5/E-and-M-series-laptops/disgusted-51-for-Windows-8-1-recovery-disk-from-...

  The link below explains how to clean your disk and clean install Windows 8.1 (or Windows 10).  The topic is on Windows 8.1, but it's the same instructions for Windows 10.

  http://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/TD...

• Acer Aspire E 11 ES1 - 111 M-P2YU Win 8.1 the HARD disk transfer to SDS

  I just ordered my E11 ES1 - 111 M-P2YU with 250 GB HARD drive and ordered a 250 GB SDD to speed up and reduce power consumption. How can I move Windows 8.1 since the HDD to the SDS? * Please * don't not sugguest upgrading to W10 - I would rather cut my eyes out of my skull with a rusty spoon and be eaten by the bear while the bees cover sting me for 48 hours straight.

  I hope to be able to create a recover disk/USB then reinstall Win 8.1 and do it properly recognize my installation of Windows without giving my some garbage about piracy...

  Thank you!

  That's all you need to do.

  1 create a USB factory default recovery disc

  http://Acer.custhelp.com/app/answers/detail/A_ID/26287/related/1/session/L2F2LzEvdGltZS8xNDM5ODcwMDA...

  2. remove the existing HARD drive

  3. install the SSD and put back together

  4. Insert the USB

  5 turn on the computer

  6. replace your PC.  The recovery drive will automatically format and partition your new SSD.  When the dialog asks you if you want to repartition the disk, say 'yes '.

  There are probably a few precautions normal security somewhere on youtube.  Of course, you probably want to remove the power cord and the battery before you dive into it with the disassembly.

  And when you use your recovery disk, it would probably be best that food is still plugged in... in case the battery is dead.

  There is no need to enter a key of Windows.  Everything is automatic, including windows key board BIOS recovery.

• ES1 - 111 M-C529 Windows 10 update - card SD and touchpad not installed

  Hello people!

  I upgraded my Acer for windows 10 Home edition 64-bit.

  Installation from USB to the Microsoft page.

  Chose the upgrade path.

  Win 10 installed:

  -video driver

  -wireless driver

  -bluetooth driver

  -network driver

  -sound

  -webcam

  Windows 10 has NOT detected:

  -SD card

  -touchpad

  I have donwloaded ALL drivers from acer for the model and the win10 of the official page of Acer.

  After installing ALL the Acer provided drivers / except bluetooth / wireless - I still don't see:

  -SD card

  -touchpad

  Anyone with any suggestions?

  If you please provide some real useful suggestions and not spam / copy paste things and so forth if possible

  Thank you!

  Bogdan

  Attached screenshot of the actual device manager:

  The standard SDA... with! said is waiting for another start.

  

  I solved the problem:

  I started to look for drivers for the whole family ES1 - x 11 and compare versions.

  For the Intel I/o drivers:

  ES1 - 111M page:

  Drivers of e/s

  Intel

  Driver e/s series

  604.10135.1001.53001

  2.9 MB

  27/07/2015

  File name: IO Drivers_Intel_604.10135.1001.53001_W10x64_A

  Size on disk: 2.91 MB (3 053 605 bytes)

  ES1-311 page:

  Drivers of e/s

  Intel

  Driver e/s series

  604.10135.1001.53001

  3.0 MB

  21/07/2015

  File name: IO Drivers_Intel_604.10135.1001.53001_W10x64_A

  Size on disk: 3.01 MB (3 163 333 bytes)

  Additional SD card reader exist only on ES1-311 page for reasons...

  Card reader

  Realtek

  Driver card reader

  6.3.9600.21275

  9.0 MB

  21/07/2015

  Currently, there are 2 files with the same name and the version with different sizes and different publication date.

  1, I installed the card reader - don't know if it was necessary or not, and then I discovered that the drivers of e/s are different version and I have installed the version of the ES1-311.

  The ES1-311 (more large size / published on 2015.07.21) worked perfectly on ES1 - 111 M and now I paved tactile and SD card.

  So for the future, dear users, please start and search all the site drivers Acer because probably, they are not paid for it or don't know not what grounds they may have to perform less steep than a 10 yo kid.

  Have a good day all!

  B.

• ES1 - 111 m-c1le ram max

  Hello, I ask how much ram can I install in this netbook: aspire es1-111-c1le.

  On the crucial website, it seems that I could install this type of RAM.

  8 GB crucial DDR3L-1600 SODIMM CT6336170

  DDR3L PC3L - 12800 CL = 11 1024Meg unbuffered NON ECC 1.35v DDR3L-1600 x 64

  Update for Acer Aspire ES1 - 111M System.

  This means that I can take 2x4gb or 1x8g? is it good? He will be supported in all cases? I can't find on the web the list of ram supported as the normal motherboar.

  Can you suggest any other type of ram?

  TNX in advace and sorry for my English.

  Mirko

  N ° MEM is directly soldered on the motherboard. You can increase the storage space by using a SD card or external HARD disk.

• Aspire eRecovery ES1-111 Medium

  Hi, I have an Aspire ES1-111 who had a breakdown of its Members, the recovery partition is slaughtered and the bios has trouble booting from the recovery key. The acer store does no stick eRecovery for ES1-111 and repair-page said that the SNID is not eligible for the service.

  I'm basically left with a brick because there is no legal way to get another copy of 'Make 8.1 with Bing', because it is OEM stuff and I'm obviously not a reseller. Short buying win 8.1 for half price the unit, what can I do?

  Have you checked in with the SNID and the serial number on the appropriate regional site.

  If your computer is under warranty, you can contact Acer German technical support here support German Acer

  You can contact them directly and check the warranty information and send it for repair.

• What is the maximum RAM that can be installed in ES1 - 111 M-C9VZ Aspire laptop?

  Some time ago, I bought an Acer Aspire ES1 - 111 M-C9VZ that has 2 GB of RAM installed.

  The manual is completely silent on the extension of the memory, i.e. what maximum RAM would be the system can tolerate. I assume that there is only one memory slot (I hate to take the unit out just to check that).

  Also I suppose you could get one 4 GB memory card to replace the existing one. But the bus system will be able to handle the extra memory.

  Any ideas would be appreciated, thanks

  Derek

  You can upgrade to the top with 8 GB of memory, you have a memory slot in your laptop and need to get one stick to replace the current stick.

  http://www.crucial.com/USA/en

• BlackBerry Smartphones Trackpad freezing after trackpad replaced several times. Advice please.

  I have a 9300 Curve with OS 6. I can't return the unit to the original vendor (out of warranty).

  It's the kind of case.

  1.) Trackpad stops scrolling after the backlight turns on again. After a delay of 10 seconds, it works well

  2.) after an hour or two the trackpad stops scrolling completely. The "push button" trackpad works well.

  (3.) I have hard reset the device. Trackpad will stop working completely (does not scroll and pushing as a button does not work either)

  4.) I send phone in for repair.

  5.) if it works after "trackpad cleaning and replacing" my phone works very well for a few days. Then the problem starts again.

  6.) If cleaning does not work, they replace my trackpad. This usually works for a few weeks to a month. Then the problem starts again

  I'm sick of having the phone is sent for the trackpad to replace just over and over again.

  Does anyone have advice? Or ideas on what is the REAL problem? Pleas help. I posted a similar topic 3 months ago, when the problem occurred. But no one answered. Suffice it to say that I still have this problem.

  Yes, you can try to reload the software, but it looks like you're under OS6 already.

  http://us.BlackBerry.com/support/installpc.jsp

  I think this is the card that gives you problems.  You can try to reinstall the software, but I don't know if this will help.

• How to use the webcam on my Aspire es1 - 111 m? Where can I find the program?

  I need for an interview.

  @brummyfan2. I found that app, but I was not sure if the company interview me wouldn't automatically able to access my webcam - they were. Thanks a lot for taking the time to help. Take care.

• Upgrading RAM for Aspire ES1 - 111 M-P156 possible?

  Is it possible to upgrade the RAM on this laptop Aspire?

  If so, should what kind I?

  Thank you.

  ianwuk

  Hello

  Watch this video of a similar product.

• Touchpad ES1 - too sensitive 111 M

  I just bought an ES1 - 111 M (win8.1) and the touchpad, it is almost unusable.

  The problem is not the cursur speed, the problem is the pressure sensitivity. That is when you move the slider autour, I constantly accidentally click, drag and drop or multiple selection.

  Is it possible to change this sensitivity (not the speed of the cursor), or load an old driver so that it behaves like an old generic touchpad 'no precision' (which I usually turn off the tapping/gestures and click on using the integrated touchpad buttons).

  Torbjörn

  I have provided service under warranty. They repaced the touchpad and now it behaves as I expect that a tablet should behave. Problem solved.

• Trackpad gel

  Hello, Apple community. I recently bought in February a 13.3 inch MacBook Pro retina and it already gives me a problem. He has recently started to freeze the trackpad and the wired mouse that I have connected. He's done a few times already. I don't know exactly what it takes any to restart my computer, but I feel that it should not happen that it is practically a brand new computer. I think it's software related, but I could be wrong. I upgraded 10.11.4 El Capitan. It's the only thing I've done. Anyone else having this problem? Is there a solution? Thank you guys!

  If I understand correctly, the computer slow when you type in any application. Looks like you already have a troubleshooting. I would recommend that you read this article, it may be able to help the cause.

  OS X El Capitan: If you think you have incompatible connection points

• Installation of the OS problem

  while trying to install win 7 on aspire es1 111 m, I get a message failed to start security.  What does that mean?

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/27071/~/how-to-enable-or-disable-secure-boot

• V3-112 p-C3CM add an SSD

  Hi all

  I have a V3-112 p-C3CM here for someone who wants more storage. After opening the unit I noticed that there is space for a 2.5 hard drive and also solder points but no normal connection.

  So my question. Is it possible to add a SSD or other hard disk of 2.5 inches and someone if it's possible could give the link for the product.

  It does not seem to anchor screw it, but it is not just to sit on the solderpads. It should be soldered on the map.

  

  The next thing would find the part. Acer will not this part provide.

  This motherboard is available for the best offer + whatever it would cost to ship it. What is your customer willing to pay for more storage?

  http://www.eBay.com/ITM/Acer-Aspire-E3-112-ES1-111-v3-112P-laptop-motherboard-Intel-NB-MRK11-001-R-5...

  Maybe you can find a motherboard locally.