Frequency Modulation thing. How to solve it?

Similar Questions

• How to solve ' error AppName from: Module "AppName-6"not found "?

  How to solve this error.  I was reading a lot of topic, but it will help you to "Blackberry JDE". But I use 'Eclipse plug-in. "
  Please help me.

  My device: 9700
  OS: 5.0

  Respect of

  I presume that you load on the device using a jad.  Delete the jad and rebuild your project and make sure that the line which refers to this cod is always present.  If this is so when you put your cod upward on the web site, make sure that you unzip to extract the cod of the siblings and to ensure that this cod.

  For more information, search the forum for references to brother cod files.

• My email is not working, no idea how to solve this problem?

  I have two addresses - email [email protected] that does not work and the [email protected] who works there. I have no warnings or error messages, but I have not received emails for a week and it will not send emails. No idea how to solve this problem? Ildi

  OK let see VAT present one bit at a time.

  You should send messages using the tassiemoments server no bigpond. I think I might even be a technical violation of their service life... The provider is used to cover their bets as we ISP block port 25 connections home. I can attest to Telstra/Bigpond do not do that my mail server has worked well until the server has exploded at Christmas.

  There are significant problems with the server and especially e-mail with no records among other things a DNS server. See here the page is slow to load because it tests the configuration of the server to tassiemoments.

  The technical contact for the domain is JOANNE SMITH, WUNDOWIE, WA perhaps that is where you should direct your questions.

• Hello, I have a big problem with Firefox: Session Manager & Undo Closed Tab addons don't work, synchronization is not working do not. The story works. How to solve this problem?

  Firefox remembers the story, but doesn't remember the closed tabs, sessions.
  It happened after the Fox update to v. 19.0.2 on a single computer.

  In Options of Firefox is set to use Custom Settings For History, everything is checked except always use Private Browsing Mode. So I'm not in private browsing.

  When I press to Undo Closed button nothing happens, & in the Manager session Save Session button is grayed. I tried to install other add-ons that remembers the tabs. tried to reinstall/disable these 2 modules. Did ' t help. On my 2nd computer I have same modules, same settings and they work normally. the 3rd closed computer undo works tabs also. How to solve this problem? I decided to ask before Firefox Reset...

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------
  

  Sync is a separate issue. It works, but quite often it connects me sync account. Then I can connect only using the recovery key password and long (option choice I have no device with me because he does not accept the key to pairing device).

  Thanks for reading.

  In case you use "clear history of Firefox closing:

  • do not erase browsing history
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] clear history of Firefox closing > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

• How to solve the error-1074396080 appeared in IMAQ Image color table

  Hello

  I'm above mentioned error.

  Here, I have attached my screenshot of the error.

  Could any one please guide me how to solve this error.

  I use kinect driver kinesthesia generating U24 Bit RGB Image and I want to convert it to Image IMAQ type, but I get an error mentioned.

  But when I do not use the acquisition of vision and vision assistant then every thing is good average is no any error which I have attached in annex 2.

  Please guide me how to solve this problem.

  Thank you very much.

  
  

• my freezer scandisk to 0% at the start of the computer. someone please tell me how to solve this problem

  my freezer scandisk to 0% at the start of the computer. someone please tell me how to solve this problem, and for this reason, I can't use my computer for other things as well. It is now very slow and do not file load. as adobe flashplayer doesn't load on google crome more please help me with this. I have windows xp sp2

  Yes, install xp3, the patch is only for hp AND amd pc, install from the link and then navigate to the microsoft updates and a priority scan, install, then do a custom scan and install rootkit updates, it will be a long process that you are behind in security updates , \\

  clean the pc then do the following:

  Shenan Stanley tips: will probably want to clean this machine...

   

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• How to solve the internal error 2753

  How to solve the internal error 2753

  This error relates to a problem installing Windows.
  When you try to install or update anything when the message appeared?

  If so, one thing you can try is this:
  -Click on start, select run... and type CMD into the DOS command prompt
  -Type regsvr32 vbscript.dll in command prompt and press ENTER.
  -You should see a message saying that DllRegisterServer in vbscript.dll successful, click OK

  Now you can try to reinstall the program/application/update.

  If not, can you give us some info on what you were doing when the error occurred?

• Spam emails are sent to all my contacts from scratch as if the email was from me. How to solve this problem?

  Spam emails are sent to all my contacts from scratch as if the email was from me. How to solve this problem?

  original title: Spam e-mails

  What do you mean by "archived" contacts?  If they are not contacts that are currently available to you, then there is no way that your PC could be sending mail to them.

  It's the easiest thing to send an email from any address you like in the world.  This is not an indication that your e-mail account has been compromsed.  He could have, but changing your mail server access password can prevent this.  The usual cause of people receiving messages that look as if they're from your is because your address was used as the address of sending junk e-mail.  It is very common and does not mean that your PC or any PC, you never hit sends the mail.  It is something that you can only order if your mailbox has been compromised.

• explore my internet does not work, please tell me how to solve this problem, it does not connect to internet

  explore my internet does not work, please tell me how to solve this problem, it does not connect to the internet while I have internet and other things could be used

  Hello

  Can you tell us more? What is the model of the unit? Do you have the same problem when using other browsers?

  Maybe you should just clear the cache or delete cookies? Try this link here.

  I hope that helps!

• I updated my drivers and now my computer runs very slowly. How to solve the problem?

  I've recently updated my Intel graphics driver and my drivers Nvidia because they were terribly outdated. As a result, I am able to run some games that I couldn't run before, but my computer became very slow. Now, the startup time is significantly slower, and the worst part is that the actual performance of the system is slower. I checked in the Task Manager, and my physical memory constantly rotates between 40 and 60% (I have 8 GB of RAM, Windows 7) without any game or program being open, except the web browser and Skype.

  What is perhaps the reason for this problem? Is certainly the problem in the drivers? How to solve the problem?

  "My graphics card is GEFORCE GTX 660 M. Is it compatible with the latest driver? »

  Ah! A laptop computer. With laptops, it is generally better to download the driver from the mfg, not Nvidia.

  This is because the computer laptop mfg bring changes that can make the improper generic Nvidia driver.

  and while I always count should not slow down the system... You never know.

  "What services I need to run.

  
  Just to keep the correct terminology-

  Services is the area where you stopped the service of bitlocker.

  The start is where you keep things from loading when you start in Windows.

  -Most of the time what's in Startup deactivation is something personal need, but there are some things that

  I must be on the left.

  I leave the Intel common user interfaceand Installshield update service, mainly because I don't bother

  Discover what they are doing.

  I also let anti-virus, Realtek audio, software profile keyboard and a few other things active.

  I don't have Adobe Flash loading with Windows, but I don't use it a lot, and when I do the software that

  uses it it launches automatically.

  The bottom line here is that if you have software that you use all the time, it is more convenient to have it start with

  Windows.

  -Concerning the Services. This also has to do with personal preferences to a certain extent, but most things can be left alone.

  I do not use the Services tab in the Configuration of the system, because I think it's only a one time adjustment.

  (Clean boot, linked earlier, is the best tool for the verification of conflicts with Services)

  To stop or disable a Service manually, tap - services.msc - in the run command to open

  the main window of Services.

  There is an Adobe Flash update in Services that should be kept, but when Adobe makes an update

  I select the option notify me, but not to install it automatically.

  I always preferred this with any updates, including Windows updates as there is less chance of a corrupt

  Update If you're aware, it happens and do not do something intensive system while the update is being installed, particularly when an update requires a restart to complete.

  -Registry. In the control run, type - regedit - and browse the registry with the file path in the

  previous post and follow the instructions. You can save the key you are modify if you wish, that the use of the

  backup to change the value to what is current would be faster than navigating to the key again.

  -When playing around with things you are not familiar with creating a System Restore point before you

  making these changes is a good insurance policy.

  If you don't know how to create a system restore point - time to do some research.

  In fact, all of the above is covered by tons of tutorials out there in the www.

  SSD vs HDD - the specifications of the system for you the machine should be in your user manual or on the

  MFG web site.

  Prefetch is useful with HARD drive, because it improves performance somewhat, but read-ahead is not really necessary with SSD.

  and can reduce the life expectancy SSD a bit (there is debate on gravity)

  More research for more details. D

  -If you use a HARD disk and that you have enabled Prefetch, the Prefetch will be rebuilt over time, if you delete the files.

  -Here's another tip for when you are not sure of the impact of deleting files.

  Rename file/folder. You can do something like add another couple of P to the front, or a 1a which will move

  the file to the top of the window. If nothing is wrong in the next few days, you can delete the folder.

  This method protects to empty the trash accidentally and lose the file/folder.

  -Speaking of deleting the file. A great TEMP folder can slow things way down.

  Run Windows, Disk Cleanup . This will remove many files in the Temp folder.

  Or, for a full, clean, go to the - your User\AppData\Local\Temp

  Open the Temp folder and delete anything that can be deleted (impossible to delete the files that are used).

  -Defragment your HARD drive

  -Run the Zig - zag Kit you'd use again and analyze the results.

  It was a long, huh!

  .

• How to solve this problem of ASDM and Anyconnect VPN with same java version?

  Hi two things that I can't the same Java version. I want to launch ASDM and also be able to connect on the web page through web browser (SSL vpn). Java is a pain. If my PC uses java 1.6.0.32. the ASDM is easily accessible, but cannot open my web page through web browser. If I install java 7, the Web page can be opened, but ASDM cannot be opened. Can someone tell how to solve the problem? Thank you

  Hello

  You can probably try 2 things here: -.
  Please go to control panel > Java > go to the Security tab > lower to medium security.
  You can also use Java version 45.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Smartphones blackBerry how to solve this problem "Eception exception: dssma: state (5) invalid: 25 in blackberry curve 8520?"

  HELLO, I have the blackberry curve 8520. I got error on my phone. the error is ' Eception exception: DSSMA: state (5) not valid: 25. I am unable to open my Inbox messages and unable to view the phone's call history. the phone displays the same message over and over again "Eception exceptionMASA: state (5) invalid: 25'." Please help me how to solve? I am unable to read text messages on my phone. Please help me.

  Hello and welcome to the community!

  There is virtually no diagnosis of those - they are the equivalent of random errors in Windows for which trace the root cause is futile. Basically, here's the last out in the programming code - some event occurred for which there is no event handler in the code. The patch is an update of the code that handles the event... but, again, what is the event is almost impossible. So, there are a few things to try:

  Sometimes, the code simply is damaged and needs to be updated - just like a reboot:

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  If it doesn't boot properly, then you need to try Safe Mode:

  • KB17877 How to start a BlackBerry smartphone in safe mode

  There may be a code updated to the value of the carrier - check out them through this Portal:

  • http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  The toughest possible causes are a bad application behave. To find it, there are two options. Is to see if you can read the log file:

  Go to the home screen. Hold down the "alt" key and type "lglg". (You won't see anything as you type). This will bring up the log file. Scroll down (probably a lot of pages) until you see a line that says "eception execption. Click on this line. The application name will be in the info. Alternative methods to implement the newspapers are in this KB:

  • KB05349 How to activate, view, and extract the the event logs on a BlackBerry smartphone

  The other method is to remove the apps one at a time, wait a while between the two (I usually recommend a week), until the problem stops... revealing the offending application. Yet another method is to recharge the BB OS itself, leaving little time between the addition of other applications on the BB in order to be able to determine exactly what is the cause.

  Good luck and let us know!

• What is werfault.exe error? How to solve window 8?

  Separated from this thread.

  Original title: what is werfault.exe error? How to solve window 8? its bad thing for windows 8? / Please solve it quickly

  What is werfault.exe error? How to solve window 8? its bad thing for the user to window 8?

  Hello

  I will help you certainly with the same. However, we need a few details to better understand the cause of the problem.

  1. Once you get this error message?

  2 did you recently do changes on your computer, before the show?

  Werfault.exe is used to Windows error reporting. This is a feature that allows Microsoft to track and address errors related to Windows features, the operating system and applications. It offers you the opportunity to send data about errors to Microsoft and to receive information on the solutions.

  You can access Windows here error report settings:

  1. press Windows + X, choose Panel.

  2. choose system and Maintenance , go to Problem Reports and Solutions.

  3. Select change settings , and then choose avancΘs.

  4 try to disable it temporarily and see if this will fix the issue.

  As a temporary solution you can disable the error reporting service:

  (a) Press Win + R, type services.msc and press ENTER.

  (b) find Windows Error Reporting service in the services list.

  (c) make a right click on it, and then click Properties.

  (d) open the "Startup Type" list and select "Disabled" press OK.

  Then check and see if you still get the error werfault.exe on opening the programs.

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Photo is absent and has no intelligent Preview: how to solve?

  I need help to solve the problem below.

  Fist, I got the ""! "display of the missing file and I solved the problem noted in the appropriate location og the file on the external hard drive." but then it didn't always sync with mobile light room puts me the message as below

  I don't know how to solve the problem that I can go on the module development and work on the image and when I return to the mode of the library it is always showing the message. I have a problem for a lot of my latest photos

  Thank you for your help

  

  You can see an overview of the library. Is the original photo in a folder on an external drive? If yes the drive is connected to your computer. LR will take the original to create a smart preview for mobile synchronization with LR.

  Open the metadata on the right panel, while the photo is selected (highlighted) and click the arrow pointing to the right next to the folder. That will lead you to the correct folder in the left panel. You do a right click on the folder name and choose 'Show in Explorer' to check if the photos is available. The folder will have a question mark if it is offline or if it has been assigned.

• I just bought the app for photographers creative cloud when I try finally connect with PS CC, I received an error message that says "no detected subscription. I don't really know how to solve this problem, I used my Adobe ID to connect several times

  I just bought the app for photographers creative cloud when I try finally connect with PS CC, I received an error message that says "no detected subscription. I don't really know how to solve this problem, I used my Adobe ID to connect several times and it just still the same message.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "