"Frequency out of range".

Similar Questions

• Error message "frequency out of range".

  I recently bought a game, but it won't work. My PC far exceed the minimum specs to run the game, but when I run the game, my screen goes black and then a box of type screen saver appears who says "frequency out of range".

  Hello Mhl03,

  Another useful glimpse.  Not very recent games are supported wide screen resolutions.  I had to learn the hard way myself.  A good number of EA games doesn't support widescreen.  You can see the view of support of the game to see if it supports widescreen or if a fix has been released that will.

  Hope this helps you Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• When booting computer error says "frequency out of range" in Vista

  I tried to play the fortress team 2 out of steam when he says "frequency out of range" when he started. I restarted my computer, he got to the start screen, but with the screen that he always says "Frequency out of range" there is sound but no screen. I tried to change the resolution in safe mode, but it still doesn't work. need help please

  * original title - when I turn on my computer, it says "frequency out of range."

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do the restore of the system in Safe Mode, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I get rid of frequency is out of range warning on my VPL-HS60 projector?

  I recently changed the lamp on my projector and when I turned it back on, I received this warning and now I don't have any picture (sound is ok). All the elements are connected with HDMI (receiver, set-top Blu - ray player cable Charter and projector). Prior to that, everything worked fine (only changed / bulb of the lamp).

  I also put the old bulb back in and it still does not work (as I suspected).

  One thing I noticed in troubleshooting, it is that I can not change the image or Signal settings on my projector. He said that it is not available (not sure if it was this way before I changed the bulb).

  Can someone help me with this?

  Thank you!

  I no longer get the "frequency out of range" warning (I got that fixed - I don't know how but I fixed it before see and try your suggestions).

  So now I can watch the cable TV with cable box set to 1080i. However, I can still watch all the movies of my Blu - ray player (again this used to work fine) - no image is displayed. I tried to adjust the video output from the blu - ray player at 1080i and 720 p with the 1080/24 p output BD ROM set to Auto or off function and it still does not (sound is ok).

  Any ideas or suggestions? Thank you!

• Monitor says out of range

  Monitor says out of range. also 91 khz frequency 85 Hz v... need of v to 75 Hz frequency. How can I do this?

  Hello

  Please see your message to http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/hertz-problem/5f02a5c5-b059-e011-8dfc-68b599b31bf5

• Monitor "Signle Out Of Range" error?

  Hello

  I currently have two monitors Setup. The principal is a 20.1 "(également assez nouveau) and works very well, however, my 2nd monitor (old CRT 19"), decided the next day he does not want to work more. " He has the power, is linked up to my PC correctly, and I did nothing out of the ordinary recently. The problem is that I start my PC and everything it says on the 2nd monitor is 'Signle Out Of Range', and none of the controls on the monitor itself no longer works. I tried switching autour monitors to see if it works as a main monitor, but without success. Windows does not seem to think that something is wrong with her, any more than my graphics card.

  Windows 7 Ultimate 64 bit

  NVidia GeForce 9800 GTX GPU 512 MB of video memory

  The system does not think that something is not at all I can say... can someone help me to try to find a solution or does it just sound like my last CRT monitor is eventually died?

  Thank you

  Ricky

  All the information you presented suggests the monitor CRT is close to death. The switch that you did onscreen main task, without success, shows the connection of the cable, the port of graphic adapter and the details of the parameters are not the problem - the monitor is the problem. "Signal out of range" warning could mean several things, but statistically, it means the refresh frequency is zero, i.e. internally the horizontal sync signal is not present.

  Display systems these high voltage (CRT) just "upwards and die", it is their behavior that is proven. So my advice is to plan a funeral and go shopping for a new monitor. Yes, patients out even of long comas, but I wouldn't bet on a surprising outcome.

  My condolences,

  Paulo

• Monitors flicker and "Input Signal Out of Range"

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  After research, I tried to start safe mode, but the problem persists.

  I read that put the computer to sleep and then wake up could solve this problem... it worked a

  couple of times, but the issue soon returned.

  I tried to reset several times VRAM/LANDAU and SMC.

  I doubled checked all the connections.

  Under the system of preferences > display (when the image is stable long enough for me to see) everything looks OK. Under the screen of the 'Default display' tab is selected. On the color tab, there are three HP2071d listed (with a selected) in the window display profiles. I've linked by selecting one of the other "HP2071d" listed without noticeable change.

  I also reset both monitors to factory settings via the menu screen of the monitors.

  I also came across this mini Mac EFI Firmware Update 1.7 for flickering on end of 2012 Mac Minis, but when I tried to run I got "this software don't is not supported on your system. Ugh. It turns out that my Mac Mini is already updated to MM61.0106.B0A (2015-002)

  My Information System > Hardware > graphics/display info is:

  Graphics Intel HD 4000:

  Chipset model: Intel HD Graphics 4000

  Type: GPU

  Bus: integrated

  VRAM (dynamic, Max): 1536 MB

  Seller: Intel (0 x 8086)

  Device ID: 0 x 0166

  Revision ID: 0 x 0009

  Exhibition:

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3171PFF

  Mirror: on

  State of the mirror: mirror material

  Online: Yes

  Rotation: support

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3170P31

  Main screen: Yes

  Mirror: on

  State of the mirror: mirror of Master

  Online: Yes

  Rotation: support

  I am of the ideas of what else to check/try.

  Thanks for any assistance that anyone can provide.

  bdcs64 wrote:

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Quite the same configuration except here, with 2 Samsung S22B310 DVI monitors on an i5 2.5 GHz in late 2012.

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  Both monitors isn't good. Which would lead us to think that the Intel HD 4000 is overheating and the problem is not with any of the adapters or cables. Although, if one of the cards was not internally, it could put additional heat stress on the graphics chip.

  Personally, I will try a few things.

  1. turn off, unplug everything, open the bottom cover and give it a good cleaning to make sure it cools properly.

  https://www.iFixit.com/device/Mac_Mini_Late_2012

  2. try each monitor individually for awhile configurations see if the problem follows the monitor cable adapter installation.

  (I know he'll be a brake after obtaining used monitors to double)

  3. try using > MacFanControl to monitor and help control the temperature of the GPU ITPP.

  http://www.CrystalIDEA.com/Macs-fan-control

  FWIW, I do not use screensavers, but I do a lot of videos as well as some games of light on both my 2010 and 2012 of the Mini and I really believe that MacFanControl has really helped to extend the life of graphics on these two systems.

  I use the control based on the sensors on the sensor of GPU ITPP and configured so that it starts slowly rise in power of the fan above 129' F

  

• HP 2509 b monitor guard displaying "Input Signal Out of Range" and then go to sleep.

  I went on vacation and shutdown my computer for 2 weeks.  My monitor worked great for a month before.  I came home last night and turned on my system this morning.  Now I get a white message in the middle of the screen with "input out of range Signal. Change the settings for 1920 x 1080 at 60 Hz"and then the screen goes to sleep.  I can turn the monitor off, wait a moment and then turn it back on again, but continues to repeat the same thing.  I checked and the screen is already set to 1920 x 1080 at 60 Hz.  I use VGA and have the default positioned like this.  I followed the guide to troubleshooting online for this error, but it did not help.  Can someone tell me please how to fix this?

  Finally, I got this figured out!  Here's what I did.

  Control Panel

  Display

  Parameters

  Advanced

  Intel(r) Graphics Media Accelerator Driver

  Graphics properties

  Display settings

  Expansion of the display

  Chosen at this stage full screen (no border) instead of "maintain proportions"

  As soon as I put this the error screen disappeared!  Can someone explain to me why this adjustment has been around?  I would like to know.

  Thank you all for your help.

• Unable to connect PS 2 to tToshiba 19W330DB TV - "out of range" msg

  PlayStation 2 for as much as I know only need the ypbpr lead to connect to the TV.
  I have connected the audio cables very well, but when it comes to connecting the video cable (yellow), it seems to be wrong.

  When you turn the console on the initial screen for playstation comes in black and white.
  The screen flashes then a little and the message 'out of range' appears.

  Someone at - it ideas on how to connect?

  Hello Laura

  Please don't be crazy on me, but this is the support forum for the Toshiba COMPUTER system. If you have connection problems Playstation 2 I recommend you contact the manufacturer of the Playstation support. They know how to manage with own product.

• "Error 0xBFF69012 attribute value is out of range" for Point Grey Grasshopper2 GS2-GE-50S5M

  Try to get the camera above to work at MAX. Running on LabView 2010 SP1 with Vision Acquisition software August 2010.

  Errors illustrated: error 0xBFF69012 attribute value is out of range

  Camera works perfectly well on the supplied software advanced Grey. Point Grey Image Filter Driver installed. Turned off the Windows Firewall. Card (http://www.sonnettech.com/product/prestogigproec34.html) Ethernet supports Jumbo Frame.

  Read through the following measures without result:

  http://digital.NI.com/public.nsf/allkb/FCE7506A3AF7636C862576240072716D

  http://digital.NI.com/public.nsf/allkb/A0A1CE4704265BF2862578CA007A4CF8

  How will I know if there is a problem with the XML file?

  What are the possibilities that this device is not compatible with IMAQdx?

  Thank you.

  Problem solved in new firmware version 1.25.3 - 00.

  Contact Gray Point to this firmware.

• The IVI Drivers: RangeCheck of initialization option set to true: failed to get an out-of-range error

  Hello

  I'm new to IVI drivers (started using them last week) and I have a problem with the option of initializing RangeCheck.

  So get used to the IVI drivers, I used the example provided with the AgilentE36xx IVI - COM driver (on my computer, it is located in C:\Program Files\IVI Foundation\IVI\Drivers\AgE36xx\Examples\VS.NET\Cpp\Example1).

  I could do everything I wanted except get an error out-of-range, during the passage of an out-of-range value to a function. I put the RangeCheck init option to true, but I don't have any error in the simulation, nor with the connected equipment.

  Attached is the code (from the example of Agilent) but modified so that it should throw an out-of-range error when adjusting the tension on the following line: spOutput1-> VoltageLevel = 1000; ... why no error.

  Still, it runs correctly. Can someone tell me what I'm not doing correctly.

  Kind regards

  Roman

  Hello

  I posted the question on the Forum of Agilent.

  Here is the link to the post: http://www.home.agilent.com/owc_discussions/thread.jspa?threadID=33348&tstart=0

  The problem is now resolved. Thank you for your help.

  Kind regards

  Roman

• "out of range" error on I-110 fieldpoint

  We try to connect the pressure Omegadyne transducers (PX1004L1) that give a reading of mV to 10 v excitation. Before you connect the 4 cables (excitation, signal and two Commons) I-110, we get an error 'out of range '. Disconnect the signal + / leads and measure with a multimeter, we read the mV expected signal. If reconnect us the signal + / conduit and disconnect the excitement + / leads and then connect to a power source (external to the I-110), we read the expected of the I-110 mV signal. Any suggestions on what is happening here? We have already exchanged the head I-110 with a spare part that we know is operational.

  I have not heard of "Omegadyne", but I know Omega.  What is the device?  http://www.Omega.com/pressure/PDF/PX1004.PDF

  You're talking about 2 Commons.  But what I see, it's a bridge 4 circuit son strain gage.  I think you should use a SG-140 module to read this device.

• "Value is invalid or out of range" when you build the project in CVI 2009

  I converted a project to the wire of the CVI 9.0.1 to CVI 2009, and whenever I try to compile the distribution I get immediately the error message "Value is invalid or out of range" and stop the construction.  This error message is not too terribly useful to determine what the problem is, and I don't see anything obviously wrong with the signs of 'change the Installer '.  Any idea what's going on?  Thank you.

  Well, I'm a little confused by what I see. The newspaper confirms my suspicions earlier that one of the values of timer progress cached version is cause of an error. However, the values in the file "TriboScan OFFLINE.cds" you posted appear very well and do not cause an error when I copy in .cds another simple distribution (since I do not have the files to test your actual building distribution). Are you sure that you build the 'TriboScan OFFLINE.cds' distribution? In any case, I recommend a little offending the .cds hand editing. Save first (just in case), open it in a text editor and delete everything between and (that should be all down). This should solve your problem.

  Let me know what you find.

  A. Mert

  National Instruments

• I am facing a problem with the beep.vi. I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound.

  I am facing a problem with the beep.vi.  I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound. Everything works fine except the sound alarm. It gives the table 1 d of type mismatch. I tried to fix this by placing it in a box structure. But it still does not work. If someone could help? Please find attached my VI. Best wishes to all visitors to the Forums of Discussion OR.

  Ihab El-Sayed

  published here: http://forums.ni.com/t5/LabVIEW/Playing-sound-based-on-exceeding-a-threshold-value-1D-array-data/m-p...

• Prosilica GigE GC650C error 0xBFF69012 attribute value is out of range

  Hi all

  I had been using a GigE Prosilica GC650 of camera on a target real time with no problems. Today I tried to connect the camera to the MAX and I get the above error. I have read every thread I could find about this error and have tried the following with no luck...

  -Deletion of files xml, iid and CIM with the camera disconnected and non-powered

  -Update the firmware of the device to 1.36

  -Repair OR-IMAQ 4.3 installation

  -OR-IMAQdx 3.4 repair facility

  The Prosilica camera viewer works very well. Another oddity, it's the same device works fine in the same version of MAX on another computer with hardware counterpart. This computer has versions of the same software (Labview 2009, IMAQ, etc.) to the problem machine.

  I have not installed software or updated between the time when the camera was working and now (about 1 week).

  Any ideas would be greatly appreciated!

  Chris

  Hi Chris,

  The only thing I can think of is to check the link speed. I think that some of the attributes on the Prosilicas go out of range, when they are connected to 100Mbit instead of 1 Gbit. Check that the interface of the camera card and the network show a gigabit link. Maybe you have a bad cable which is originally the link down to speed.

  If this does not help, let me know and I can try suggesting other things we can try.

  Eric