Frequency TV app

Difficulty of the spectrum TV app

You do not discuss Apple here, fair to other users. It is not an app Apple to complain for the developer of the app.

Similar Questions

Frequency TV App for Apple TV

Nobody knows when the TV App of Charter Communications spectrum will be available for Apple TV? Charter seems to support only Roku to TV application.

I'm in the same boat. I have the iPhone, but would really like the app of spectrum on the ATV. Somehow, I don't think that Charter will do this. They probably see the ATV as a competition.

Hello everyone, I'm unable to find how to manipulate the form point via script when you print separations.

 docRef = app.activeDocument;
   
   sepOpts = new PrintColorSeparationOptions();
   
   jobOpts = new PrintJobOptions();
   
   opts = new PrintOptions(); 
   
   opts.colorSeparationOptions = sepOpts;
   
    opts.jobOptions =  jobOpts;  
   
   sepOpts.inkList = docRef.inkList;
   
   sepOpts.colorSeparationMode = PrintColorSeparationMode.HOSTBASEDSEPARATION;
   
   alert(docRef.inkList[3].inkInfo.dotShape);  //blank


       sepOpts.inkList[3].inkInfo.dotShape = '[Ellipse]'; //blank
       sepOpts.inkList[3].inkInfo.angle = 30;
       sepOpts.inkList[3].inkInfo.frequency = 42;
       
       
  app.activeDocument.print( opts );

I can see by going to the print dialog box and tab out after running it, I change the frequency and angle. However, the dotShape is empty, so I'm not doing things. I couldn't find any examples, so here I am now haha. I tried tiny, with or without the brackets. If anyone knows how to do this, please let me know. Thank you all!

If I run your script it seems to work.

Ignoring what illustrator says, if you look at the ps as a text file, you will find that the adjustment worked.

I don't know if that's true, as I don't really understand what effect this has, but the value ends up in the ps file.

If I manually put the plate of the ellipse, and then consider the ps file created I get a strange string at the same place

so I created a table and joined him and the file out identical to the product manually (note: I used a diff... preset number)

docRef = app.activeDocument;  

  sepOpts = new PrintColorSeparationOptions();  

  jobOpts = new PrintJobOptions();  

  opts = new PrintOptions();  

  opts.colorSeparationOptions = sepOpts;  

    opts.jobOptions =  jobOpts;   

    opts.printPreset = 'Print Preset 2';  

  opts.PPDName = 'AdobePDF';  

  opts.printerName= 'Adobe PostScript File';  

  sepOpts.inkList = docRef.inkList;  

  sepOpts.colorSeparationMode = PrintColorSeparationMode.HOSTBASEDSEPARATION;  

// alert(docRef.inkList[4].inkInfo.dotShape)  

      sepOpts.inkList[4].inkInfo.dotShape = ['{abs exch abs 2 copy 3 mul exch 4 mul add 3 sub dup 0',
                                                                'lt { pop dup mul exch .75 div dup mul add 4 div 1 exch sub } { dup 1 gt{',
                                                                'pop 1 exch sub dup mul exch 1 exch sub .75 div dup mul add 4 div 1 sub }',
                                                                '{ .5 exch sub exch pop exch pop } ifelse  } ifelse } bind'].join('\n');
      sepOpts.inkList[4].inkInfo.angle = 30;
      sepOpts.inkList[4].inkInfo.frequency = 42;  

  app.activeDocument.print( opts );

hope this helps

the iPhone camera App is not memorize the recording mode

Hello

I use the default photo from Apple on my iPhone App, especially because I can shoot while the iPhone is locked. No other applications can do that, not even using the Notification Center (other applications for registration as Strava can do it, but not to record video).

However, I noticed that most of the time (but), mode (video, panorama, photo,...) is not like it was before.

I turn almost only videos (idling, when outdoors). Whenever I start the camera application, either in the "sweep upward" screen (locked phone), or from the home screen in unlocking the phone, the camera always (or almost) default is still Photo. I have not found a way to default to the video.

When you have to take action, it is very annoying to have to fumble with the buttons until you can actually draw. Not to mention that the app is so slow that initialize in the meantime, you cannot drag on the video mode (until the camera is completely initialized); then you drag too and the video mode Miss... it's a mess...

However, sometimes, apparently when you start the camera after making a video, the unit starts in video mode... but you expect it to start in photo mode, you can already drag by anticipation and video mode Miss yet :-)

The behavior is not very consistent.

Unless there is something that the camera behave correctly, I think apple should seriously improve at least 3 things in the camera application:

(1) in previous versions of iOS, the initialization of the camera was not otherwise slow. How about you do it as fast as it was before?

(2) pass from still photo to video, then to move slow takes too long. The control must be more effective and faster. You should have a faster and more direct access to the different modes of recoding. How about a configurable "by scanning screen?

(3) the camera app to set the frequency of default images for videos. What about settings for the default recording mode? (video, panoramic)

Hi there redtomato,

I understand that the camera on your iPhone app will automatically in video mode you want. If I always had to take videos, I think it would be very convenient to open the camera in video mode application every time I opened it.

I tried what you said on my end, opening the camera my screen lock and video mode change application then blocking of my iPhone, and then repeat the same steps. Surprisingly, when I conducted my test of the camera to video mode application.

I'm quite uncertain that if if it is a small problem with iOS, or if it was something that apple designed specifically, or maybe I'm just having chance repeating the steps you mentioned. To help troubleshoot your device, I recommend you to make sure that you use the latest version of iOS if your device is up to date. Once you have done this, try to restart your iOS device and see if you're still having problems.

On reflection, maybe you can force the camera app to quit smoking? If this is the case, this could explain why you may need to manually change the camera in video mode application each time.

I think your suggestions are great ideas, and if you want too, you can submit your ideas to Apple directly here: http://www.apple.com/feedback/.

I love my iPhone and I like the camera on it and especially photography, so I can understand how you feel about the inconvenience, but I really hope the information I've provided help it it, otherwise, if all goes well it will be or is somehow.

Continue to take great videos!

Envy 4500: HP Print App

I can't print using the HP application despite being able to do it before! I try to use the HP eprint app of a Nexus 7 with a S7 Galaxy and it is sent to the printer, but it hangs just with the message "Now Printing" but nothing happens! All parameters are in order as I know, the printer is visible on both devices. It's so frustrating. Help, please!

@BS6

Thanks for joining the Forums from HP Support.

It is the one-stop shop for all technical solutions.

Maybe I can help you with this. I understand that you cannot print using the HP application.

Please follow these instructions:

Step 1: Check the device Android, printer and network status

Make sure that your Android device, printer, and network are working properly and ready for printing.
- Confirm your Android device is connected to the network: on your Android device, open the wireless settings and make sure that your device is connected to the network, you want to connect to the printer.
- Make sure that the printer is turned on and connected to the network: the printer may be in mode 'sleep', power save mode or turned off the coast. Press or press a button on the printer control panel to wake up the printer. To confirm your connection to a printer, select your connection type.
  - Wireless network connection: on the printer, make sure that the indicator beside the wireless icon is either on and stable, or flashing. If the wireless light is not on or flashing, press the wireless button or open wireless network or setting menu to make sure that the wireless signal is activated.
  - Wired network connection: make sure the cable is connected to the printer Ethernet port and a port on the router. The green link light must be stable, and the orange activity light should be flashing when the cable is connected.
- Make sure that the application you are trying to print from is supported by the print option. Looking for a print icon confirm that the application supports printing.
- Move the printer and router closer together: move the printer and your Android device closer to your wireless router, but not less than 6 feet (1.8 m). Wireless signals may be lower at a greater distance between the printer and the router.
- Check the broadband router: many routers can operate in the frequency bands 2.4 GHz and 5.0 GHz, but not all HP printers support both bands. Make sure that the band of 2.4 GHz router is enabled and broadcasting. If the router broadcasts the names of separate networks (SSID) for each band, connect the printer to the band of 2.4 GHz SSID.
What happens if I cannot print on my printer?

I hope this helps.

I will wait for your answer.

COM listener indefinitely while app is running

Hello

My application supports multiple threads

A must have COM port a thread listening, is obliged to hear indefinitely
While the application is running and up to end app.

The program uses any other COM Ports (so the time is set to 10 s to avoid
communication problems with this other ports)

the pseudocode is as follows:

int main()
{

CmtNewThreadPool (1);
CmtScheduleThreadPoolFunction (Listen);

continue code execution (new threads) while listening to the COM port

end of the app

to listen on the COM port finish

CmtDiscardThreadPool();
}

int Listen()
{
ComRd()
}

The problem is that if the timeout is not set to infinite
ComRd() expires after 10 sec. until the arrival of program to listen to Com Port
before the end of the app.

Maybe it works if the function ComRd is inside a c while() loop
until end of the main program (I think isn't the best solution, because)
Is to perform a function ComRd every 10 seconds...)

Any ideas?

Thank you very much

Well, giving rise to a separate thread for that Yes, you will loop indefinitely in this thread to listen to port activity. The system is in charge to let some time CPU for other threads, but you may want to consider slow execution of this thread because you may not have such a port fast scanning.

You might consider using an asynchronous timer instead of a thread for example: asynchronous timers are built on multimedia timers and run in a separate thread (only one thread for all timers async); It is usually the best way to develop an application that must run periodically features: in your case the timer callback might be called GetInQLen and in cases replaced by port, handling the message to read appropriately. This task could run 5 to 10 times per second (or possiby even low-frequency), which leaves most of the execution time and resources to your other threads. If you run this way, please do not forget that you always use a multi-threaded application, so you should use all available means to protect your data from simultaneous access of several threads in the same way, you must be to actually do it.

Help the spikes of voltage high frequency Counting

Equipment: NOR USB-6229 (250 ksps / s analog in., 16 bit DAC, 32-bit counters, and internal clocks)<= 80="">

LabView 14

Problem:

I have an experimental app where I need to count the points of tension (entire #) caused by electrons striking a sensor. These tips can be as frequent as 500 000 heads of charge/sec. The tips aren't going to be the same tension every time, but they will be visible above the noise, so I need allow the user to select a threshold voltage that triggers a true count rather than the tips of noise.

Attempts:

To count such a high frequency, I gather that I need to use a counter entry to read fast enough, HOWEVER, I wasn't able to find a way to define a threshold of voltage for a counter entry because I think they expect a TTL signal anyway, which I won't. To set the threshold, I realize reading of analog input can be triggered at a point chosen, which is great, but the Analog Input sampling rate is only 250 kech. / who will not catch count each in my project.

I have a program that uses the channel count edges and it is accurate to 3% of the # expected charges. I was looking at him just with a function generator and the program does not count unless the signal voltage is higher than V 2-3 who does not work for my application. I'll post what I have. Someone know how to trigger at certain levels of tension using counters, or know a way to filter through the noise to get real tips?

Thank you!

You will need a device with a sampling rate of greater than 1 MHz analog input or you will need an external reference. With the external comparator, you can use output to set the threshold, although the user would not be able to see the signal or the threshold, only the analog account result.

Lynn

BlackBerry App passport and Facebook question

Since FB can't stand BB, what is the best configuration for notifications by email FB on my passport? I deleted the FB app and saved FB on my homescreen Passport using the browser... but I don't get notifications by e-mail FB either on my passport or on my PC... all the settings on PC are highlighted to get notifications by e-mail 'all '. Again no FB don't email in the hub and none on AOL on my PC... must I download the FB BB world app?... any suggestions would be appreciated!... Thank you

From a PC, open Facebook.

In the upper right corner, click the down arrow, and then click settings.

Click Notifications.

From there, you can change how and what frequency of e-mail notifications that you received from Facebook.

< img > image not cached in app BB10 Webworks

Hello

Is there some configuration setting, that I need to use to get Webworks (on BB10) to cache images served from a server?

I have a BB10 Webworks app that dynamically adds and remove the DOM html. Images referenced in items loading as expected, but if the item is removed from the DOM, and later added again, Webworks reloads the image file from the server, rather than using a cached version. (I can watch what is happening in the Web Inspector).

If I run the code in a browser, Chrome on Windows, it behaves correctly, by using the cached copy of the image when the new item is added to the Dom.

The frequency from the server HTTP headers are:

Cache-Control, must-revalidate
Content-length: 1730
Content-Type: image / jpeg
Date: Mon, 21 October, 2013 21:18:34 GMT
ETag:c4863b363e4536f8d854d721092cf528
Expires on: Wednesday November 20, 2013 21:18:34 + 0000
Last modified: Monday February 4, 2013 17:20:13 + 0000
MicrosoftOfficeWebServer:5.0_Pub
Server: Microsoft-IIS/6.0
X-Powered-ByHP/5.2.13, ASP.NET

So, with response codes above, Chrome set cache the image as expected, while the BB10 Webworks reload from the server each time (no caching).

I'm running on a version of the software Blackberry Z10, model number STL100-3, 10.1.0.4181, and the app is created using Blackberry 10 Webworks SDK 1.0.4.11.

What Miss me?

Thank you

Terry

My apologies for the confusion. The purpose of qnx is only available in a native extension running inside the app - not directly from JavaScript running in your application.

Here is an example of an extension that uses the qnx object:

https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10/PreventSleep

Specific location where it is used:

https://github.com/BlackBerry/WebWorks-community-APIs/BLOB/master/BB10/PreventSleep/ext/community.PR...

What is your comfort level write / using native extensions? You will need to create your own, to interact with this API.

Force to control the movements of fixed frequency navigation

Top level goal is to update the position of the mouse smoothly.

I think to achieve this goal, I need detect the movements of fixed frequency navigation.

Have a listener or substitute navigationMovement() is not sufficient because it is called when there is a movement of the navigation and when the queue of the event is to her.

It the app is busy, the call will be delayed because the queue does not get to it fast enough to make me update the position of the mouse in a jerky way.

Advisor?

I mean that I need to update the position of the mouse smoothly; It is a lie for the sake of simplicity.

Basically, I need to update the position of my object smoothly based on a movement of navigation by the user and I need to check fixed frequency rather than rely on the queue.

Thanks in advance, expers.

This is not possible, the event queue is the only option for interact.

you could reduce your background processing or remove blocks the UI thread to improve performance.

Frequency LED?

I am looking for a way to manipulate the frequency of blinking of the LED on the device using Cascades.

So far, I am able to access the LED and change its color. I can't find any mention about the frequency in the API documentation. Need a pointer on how to do this?

Thank you

Chris

I created a test project, where you can move the slider to set the frequency of led.

'Start' button starts flashing.

DOWNLOAD:

Test.zip

Test.HPP:

namespace bb { namespace device { class Led; }}class QTimer;

class Test : public QObject
{
    Q_OBJECT
public:
    Test(bb::cascades::Application *app);
    virtual ~Test() {}

    Q_INVOKABLE void blink(int frequency);
    Q_INVOKABLE void stopBlinking();

public slots:
    void onTimer();

protected:
    QTimer *timer_;
    bb::device::Led *led_;
};

Test.cpp:

#include 
#include 

using namespace bb::cascades;
using namespace bb::device;

Test::Test(bb::cascades::Application *app)
: QObject(app)
{
    QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);

    qml->setContextProperty("app", this);
    AbstractPane *root = qml->createRootObject();
    app->setScene(root);

    led_ = new Led(LedColor::Green, this);

    timer_ = new QTimer(this);
    QObject::connect(timer_, SIGNAL(timeout()),
            this, SLOT(onTimer()));
}

void Test::blink(int frequency)
{
    timer_->start(frequency);
    led_->flash();
}

void Test::stopBlinking()
{
    led_->cancel();
    timer_->stop();
}

void Test::onTimer()
{
    led_->cancel();
    led_->flash();
}

Test.Pro:

LIBS += -lbbdevice

bar - descriptor.xml:

    access_led_control

hand. QML:

import bb.cascades 1.0

Page {
    property bool stopped: true
    Container {
        Slider {
            id: frequencySlider
            fromValue: 1000
            toValue: 30
            value: 500
            onValueChanged: {
                if (!stopped)
                    app.blink(frequencySlider.value)
            }
        }
        Label {
            text: 'Frequency: ' + Math.floor(frequencySlider.value) + ' msec'
        }
        Button {
            text: "Start"
            onClicked: {
                app.blink(frequencySlider.value)
                stopped = false
            }
        }
        Button {
            text: "Stop"
            onClicked: {
                app.stopBlinking()
                stopped = true
            }
        }
    }
}

Adding a LabelField with implementation in custom page & paint freezes App.

It's the absolute weirdest thing, I met so far. After error for about an hour, I narrowed down it to the following instructions.

I have a class that extends the screen, I add the following to the constructor of the class and the App freezes each and ever time. The area of the label takes the string value of the variable title twice to create a white color with a slight black shadow text.

That's it... nothing else.

However, it freezes the App.

There is something blatantly obvious that I'm missing?
```
LabelField t = new LabelField() {
    int xy = 14;

    protected void layout(int width, int height) {
        setExtent(width, getPreferredHeight() + xy);
    }

    protected void paint(Graphics g) {
        g.setColor(Color.BLACK);
        g.drawText(title, xy, xy - 3);
        g.setColor(Color.WHITE);
        g.drawText(sportTitle, xy, xy - 2);
        invalidate();
        super.paint(g);
    }
};

Font font = Font.getDefault().derive(Font.BOLD | Font.SANS_SERIF_STYLE, 8, Ui.UNITS_pt);
t.setFont(font);
add(t);
```
My first instinct is to delete your method invalidate() object.

I'm sure that it's more than a typo in your case; in general, however, it is an extremely bad approach, aggravated by the frequency with which all kinds of 'gurus' use in their articles and responses. The endless loop it creates is 'soft', which means useful work will have a chance to be, but you'll be safer without him.

However, there are other problems in your code:

Your code layout() is not enough. When you extend a real (not abstract) field, you really want to use super.layout there is somewhere - if your super.paint won't know where to paint! Either extend the field and make all paint yourself (and then you could limit the layout to the right setExtent - but you really want to do more there, calculation of widths, positions, etc.), or call the super.layout somewhere.

Your exersizes with two calls drawText will be spoiled by the later super.paint call. First call super.paint, then paint over it (in general, you should be careful with this approach, but here, it makes sense).

SX10 Smart Phone Remote control Mobile App

I saw a video recently of the launch of telepresence SX10 Endpoint and although the device provided with a remote control basic demo included the use of a Smartphone app to control endpoint. I don't know if it was an IOS or Android mobile app but have checked on the Appstore and Google game but have been unable to find it.

Anyone know what mobile OS, the app is and if it is still accessible to the public? Thank you very much

Concerning

David Lawrence

He is called "Close connection" - on iOS for the moment.

See https://supportforums.cisco.com/discussion/12161956/cisco-proximity-new-support-community-launched

Wayne

--

Remember the frequency responses and mark your question as answered as appropriate.

Bing app on RT surface keeps hanging

Bing on my RT surface app hangs with annoying frequency. the search, by clicking on the tiles with results through the animation of click and turn on the change of the visited link color, but IE does not. Needs an update, stat. The only way to fix things in this case is to perform a reboot.

Check your wireless home network to. I was getting disconnect/connect too often problems with my surface, and a lot of "you are not connected to internet" messages that will be immediately corrected. I downloaded and installed inSSIDer and mapped my wireless connection, and of course, my N, radio 5gz fell back about once a minute. According to me, which could be a contributing factor, or the main factor to my questions.

EBS Apps control Questions?

Hi all
I take a few dump exam for master guru of ebs apps?
Can you check if my answer is good or better or the best?
Questions.
1. how it swings (increased capacity) and scalable how can it go?
All the possible ways.you can add several servers/machines or more of memory, CPU, disks, etc., by server.machine
2 database, supported programming platforms and access tools.
All (java, .net, etc.)
3 operating systems supported.
All (for example, unix, windows, etc.)
4 cycle upgrade software (frequency, methods in application and database)
All (for example you can do it every year, or every month or every 5 years, etc.)
5. the User Interface (via web, via client software)
All is supported (web & cleint, etc.).
6. Security and Audit features (handling and ease of management)
A lot of safety features and provided, internal and external audit (audit of Db, Db Vault, network, etc.)
7. backup and recovery
Backup and restore features are in place and tested (RMAN, Dataguard, etc.)
8. user query and reporting tools
There are a lot of built-in avaiable time tools and 3rd parties (ConcurrentManagers, BI, Hyperion, Excel4apps, etc.)
Please check if my answers will be passing in your standards of knowledge.
Can also help you improve the answer or what is the best response?
Thank you very much
JC

I hope that "User Interfaces" refers to where the user can input/display the application.

If this is the case of User Interfaces are OFA, form of Oracle and Web ADI form.

In R12.2.4 there are other changes in the page as a complement to the pane in the homepage above.

Reference: https://blogs.oracle.com/stevenChan/entry/usability_improvements_in_release_12

Frequency TV app

Similar Questions

Maybe you are looking for