Frequent crashes / freezes after intsalling 10.11.4

Similar Questions

• Laptop crashes / freezes after automatic update and reboot yesterday evening

  I left my laptop on last night and when I woke up this morning, it was restarted.  I assumed that an update was downloaded and installed during the night, as I put it in place for auto Windows Installer updated to date.  When I tried to stop, would not display the start menu, then I got the message that windows Explorer has stopped working and I got the info to send to Microsoft dialog box.  I chose to send information about the problem, but then I got a message that the error report had stopped working, I wanted to send information to Microsoft... nothing has worked right after that.  The arrow of the mouse move but no program would go, and I couldn't access the start menu to stop.  I tried Ctrl/alt/del but nothing happened.

  I forced a restart and booted in safe mode.  I did a system restore to a point marked as an update of windows at 03:00 this morning.  The laptop booted up normally after that; I opened and closed some programs without any problem, so I thought that the problem has been resolved.

  I was using the laptop at school (I'm a teacher) and everything was fine until I tried to close Word.  He hung up and I couldn't do anything else.  Yet once, mouse move but nothing else has worked, and I couldn't access the Task Manager.

  I did a system restore to the point where I have installed several updates yesterday afternoon.  Has not fixed the problem.  I did a last restoration to a regular point since the day before yesterday... still has not fixed the problem.  I am now running my AVG Anti-virus in safemode, but he still found nothing.

  I need help!  I have a HP laptop which is one year (and only 2 weeks after the end of the one year warranty) and I am running Vista with Office XP.  Any help would be greatly appreciated!

  I think it's fixed... fingers crossed.

  After that start above safe mode, I have restarted in normal mode in order to save what I could and uninstalled a few things.  In the process, I found the place to uninstall windows updates.  There were two listed as installed in 2010 - one is an update of windows and the other was a security update.  I uninstalled both.  I was using my computer all the rest of that day and had no more problems.  I do not know what updates, I uninstalled, but one or both must have caused the problem.  I wish I knew of to do it sooner, but honestly, I think that to do a system restore would be uninstall updates added from this point.  I know better now and I have disabled the automatic updates, so I hope that this will not happen.  Thanks for your help, even if it wasn't what ended up working :)

• Finder crashes / freezes when I'm online

  Last week, my Finder acted very funny.  Frequently, it crashes and freezes after several minutes of passage to other windows or change of icon displayed in the list view, etc..  At first, I thought that the icon display was more 'stable', but not sure at 100%.  Also, it looks like that when I am offline accidents don't happen as much or at all.  Tried to dump the preferences already (finder prefs and sidebar pref), nothing helps.

  

  I posted the console logs here.  OS X release 10.9.5 (last updated the week last of 10.9.4, so that might have something to do with it?), 2.6 GHz Intel Core i5, 16 GB 1600 MHz DDR3 RAM.  MacBook Pro 2013.  Please help - thanks.

  14/03/16 3:51:34.483 PM Finder [22920]: path of the Pipe is a symbolic link, to connect to the target.

  14/03/16 3:51:34.483 PM Finder [22920]: / Users/achung/Library/Application Support/Google/Reader/GoogleDriveIpcPipe is a symbolic link to/var/folders/dw/k2p3ppjd5tq4s74fl8f_3pqdqk8_rf/T/tmpD8rqvy, which connects to a link target.

  14/03/16 3:51:34.486 PM Finder [22920]:-[OverlayCache isPathInGdrive:]: unrecognized selector sent to instance 0x7fad3b04ee40

  14/03/16 3:51:34.487 PM Finder [22920]:-[OverlayCache isPathInGdrive:]: unrecognized selector sent to instance 0x7fad3b04ee40

  14/03/16 3:51:34.491 PM Finder [22920]:)

  0 CoreFoundation 0x00007fff8a72a25c __exceptionPreprocess + 172

  1 libobjc. A.dylib 0x00007fff8cf4de75 objc_exception_throw + 43

  2 CoreFoundation 0x00007fff8a72d12d-[NSObject (NSObject) doesNotRecognizeSelector:] + 205

  3 CoreFoundation 0x00007fff8a688272 ___forwarding___ + 1010

  4 CoreFoundation 0x00007fff8a687df8 _CF_forwarding_prep_0 + 120

  5 FinderExt 0x000000011294b1f7-[NSImageView (IconOverlayHandlers) IconOverlayHandlers_drawRect:] + 256

  6 AppKit 0x00007fff8c54e557-[NSView (NSInternal) _recursive:displayRectIgnoringOpacity:inGraphicsContext:CGContext:topView:shoul dChangeFontReferenceColor:] + 1082

  7 AppKit 0x00007fff8c54e890-[NSView (NSInternal) _recursive:displayRectIgnoringOpacity:inGraphicsContext:CGContext:topView:shoul dChangeFontReferenceColor:] + 1907

  8 AppKit 0x00007fff8c54e00d __46-[NSView (NSLayerKitGlue) drawLayer:inContext:] _block_invoke + 186

  9 AppKit 0x00007fff8c54de03-[NSView (NSLayerKitGlue) _drawViewBackingLayer:inContext:drawingHandler:] + 2297

  10 AppKit 0x00007fff8c54d4f8-[NSView (NSLayerKitGlue) drawLayer:inContext:] + 108

  11 QuartzCore 0x00007fff8ebb2812 CABackingStoreUpdate_ + 2220

  12 QuartzCore 0x00007fff8ebb1f60 ___ZN2CA5Layer8display_Ev_block_invoke + 59

  13 QuartzCore 0x00007fff8ebb1f1c x_blame_allocations + 84

  14 0x00007fff8ebb1a2b _ZN2CA5Layer8display_Ev + 1539 QuartzCore

  15 AppKit 0x00007fff8c54d3c3 _NSBackingLayerDisplay + 235

  AppKit 0x00007fff8c52474b-[_NSViewBackingLayer view] + 811 16

  17 QuartzCore 0x00007fff8ebb1162 _ZN2CA5Layer17display_if_neededEPNS_11TransactionE + 590

  18 QuartzCore 0x00007fff8ebb08b1 _ZN2CA5Layer28layout_and_display_if_neededEPNS_11TransactionE + 35

  19 QuartzCore 0x00007fff8ebb033c _ZN2CA7Context18commit_transactionEPNS_11TransactionE + 236

  20 0x00007fff8ebaffd6 _ZN2CA11Transaction6commitEv + 388 QuartzCore

  21 AppKit 0x00007fff8c54c652-[NSView (NSLayerKitGlue) _drawRectAsLayerTree:] + 591

  22 AppKit 0x00007fff8c54b351-[NSView _drawRect:clip:] + 422

  23 AppKit 0x00007fff8c62ebf9-[NSScrollView _drawRect:clip:] + 78

  24 AppKit 0x00007fff8c54903c-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor view: topView:] + 3199

  25 AppKit 0x00007fff8c549bc4-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor view: topView:] + 6151

  26 AppKit 0x00007fff8c549bc4-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor view: topView:] + 6151

  27 AppKit 0x00007fff8c549bc4-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor view: topView:] + 6151

  28 AppKit 0x00007fff8c549bc4-[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor view: topView:] + 6151

  AppKit 29 0x00007fff8c547eb1-[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor view: topView:] + 314

  30 AppKit 0x00007fff8c544e9f-[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 2828

  31 AppKit 0x00007fff8c5242da-[NSView displayIfNeeded] + 1680

  32 AppKit 0x00007fff8c58974e _handleWindowNeedsDisplayOrLayoutOrUpdateConstraints + 884

  AppKit 33 0x00007fff8cb5f061 _block_ invoke1331 __83-[NSWindow _postWindowNeedsDisplayOrLayoutOrUpdateConstraintsUnlessPostingDisabled] + 46

  CoreFoundation 34 0x00007fff8a65ad67 __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ + 23

  35 CoreFoundation 0x00007fff8a65acd7 __CFRunLoopDoObservers + 391

  CoreFoundation 36 0x00007fff8a64c3b8 __CFRunLoopRun + 776

  CoreFoundation 37 0x00007fff8a64be75 CFRunLoopRunSpecific + 309

  38 HIToolbox 0x00007fff8f3caa0d RunCurrentEventLoopInMode + 226

  39 HIToolbox 0x00007fff8f3ca685 ReceiveNextEventCommon + 173

  40 HIToolbox 0x00007fff8f3ca5bc _BlockUntilNextEventMatchingListInModeWithFilter + 65

  AppKit 41 0x00007fff8c3ed24e _DPSNextEvent + 1434

  AppKit 42 0x00007fff8c3ec89b-[NSApplication nextEventMatchingMask:untilDate:inMode: dequeue:] + 122

  AppKit 43 0x00007fff8c608107-[NSTableView mouseDown:] + 4863

  AppKit 44 0x00007fff8c70c0d1-[NSOutlineView mouseDown:] + 74

  Finder finder 45 0x0000000107b6d37d + 1176445

  AppKit 46 0x00007fff8c5f1a58-[NSWindow sendEvent:] + 11296

  AppKit 47 0x00007fff8c5905d4-[NSApplication sendEvent:] + 2021

  Finder finder 48 0x0000000107a72b35 + 150325

  AppKit 49 0x00007fff8c3e09f9-[NSApplication run] + 646

  50 AppKit 0x00007fff8c3cb783 NSApplicationMain + 940

  Finder finder 51 0x0000000107a54730 + 26416

  52 libdyld.dylib 0x00007fff8e0465fd start + 1

  )

  14/03/16 3:51:34.733 PM Finder [22920]: + [CATransaction synchronize] called in the transaction

  14/03/16 com.apple.launchd.peruser.1864641294 [489 3:51:35.643 PM]: (com.centrify.adprintd [22946]) came out with the code: 2

  14/03/16 com.apple.launchd.peruser.1864641294 [489 3:51:35.643 PM]: respawn Throttling (com.centrify.adprintd): will start in 10 seconds

  14/03/16 com.apple.launchd [1 3:51:40.312 PM]: (com.absolute.rpcnet [22947]) came out with the code: 139

  14/03/16 com.apple.launchd [1 3:51:40.312 PM]: respawn Throttling (com.absolute.rpcnet): will start in 10 seconds

  14/03/16 3:51:40.365 PM ReportCrash [22939]: report of incidents recorded for rpc.net [22948] version? /Library/logs/DiagnosticReports/RPC.net_2016-03-14-155140_Andrews-computer.CRAs h

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode

  Safe mode - Mavericks

• Frequent crashes - using 900, 00 k + memory, multiple tabs open - is the memory use a problem?

  I have a frequent crashing Firefox, several times a day.

  I have several tabs open, 100 +, and the memory usage is around 900 000 and more.

  I wonder if the memory usage is the origin of the crash, or something I can fix it?

  My task manager says that I use 67 percent of the available memory.

  Total: 2941

  Caching: 1202

  Free: 74

  Total: 207

  Paginated: 153

  No paged: 53

  Pagefile 2981M / 6116M

  This is the id of the 10 reports last crash:

  BP-c79bc97e-D502-4319-a49e-7bc0b2130917 9/16/201311:38 PM
  BP-19f60b05-F268-4693-B622-066f42130917 9/16/20139:59 PM
  BP-f43d9597-9023-487A-90d4-994d32130916 9/16/20137:15 PM
  BP-b552cdc4-6920-4EED-bff7-cb7cf2130916 9/16 / 20136:16:00
  BP-b62272cb-f4ef-4F30-ACC9-4a1752130916 9/16 / 20135:14:00
  BP-f4bebdd3-20f9-4444-8245-520c42130916 9/16 / 20133:20:00
  BP-bad99992-5b2b-4ac1-96bc-e03812130915 9/14/201311:31 PM
  962c451e-DC19-4707-9def-b2dd5cd4caed 9/14 / 201310:19:00
  BP-8de4bc69-0f86-417A-9727-e88622130914 9/14/20132:29 AM
  BP-6ae9815f-1472-492d-8738-1cd842130914 9/14 / 20131:01:00

  Where can I set preferences for dom.ipc.plugins. *? (I see no plugins or extensions of Tools-Addons that resemble a dom.ipc.plugins?)

  Extensions I have are:

  AddBlock

  Protection of navigation

  Troubleshooter

  YesScript

  PLugins:
  
  
  

  Java

  Shock wave

  Could you point me to where in mozilla crash reports that I would find the number of open tabs and memory as being the cause of the accident? (just so I can check after I have try to reset that plugin.exe run to start again I can take a look and see if the memory usage is better - or should I look at the Task Manager for that information also)?

  I noted the crush in the report was "EXCEPTION_BREAKPOINT", I guess that's a reason for exception error due to many different causes?

  I also noticed a report of incidents listed:

  Total virtual memory: 2147352576

  Available virtual memory: 533061632

  System Memory use Percentage: 72

  Available page file: 3324129280

  Physical memory available: 852447232

  What is the indication of memory, you see?

  Are these 'bad' (high usage) values of memory?

• Firefox 16.0.1, videos youtube freeze after 2 seconds. FF injuries.

  Videos YouTube freeze after that 2 seconds... audio game continues for 5 seconds on it. The whole browser stops responding and I have to ctrl + alt + delete at the process level to close FF16.

  After that I uninstalled my customized version, so BONE STOCK FF16 is miss you, this is a new installation. I tried the current version flash 11.4 and 11.2 flash version to get my problem is solved.

  NO ID CRASH. No formal don't crash in itself, just a browser totally unresponsive.

  By the way... Chrome works youtube without incident. WTF.

  In addition, this problem does not exist on my installation of Waterfox... a variant of 64 free bits of 15 FF. Maybe I have a sort of x 64 issue. I think that maybe that's the problem with the standard 32-bit version of FF16. Ask me again why this happened in the first place.

  I run McAfee OAS Business Class A / V, never had a virus or something in 4 years.

  SOLVED. Watefox is the only way it seems. Needs of Firefox to fix this flash on its own it seems.

• Satellite P500-F12 - freezes after 5 minutes of game

  I recently bought a toshiba laptop P500-12F with the specifications below, the problem I have is that whenever I try to start a game like mount and blade or empire total war, the game works for between 5-10 minutes, but then crashes completely and the cell starts producing a strong buzz. The only way out of this is to press the power button until it stops. I don't get the problem with something else that this type of games and I don't know why it does this, any help or adivce would be welcome.

  Bradders.

  Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: SATELLITE P500
  BIOS: PhoenixBIOS 4.0 Release 6.1
  Processor: Intel (r) Core (TM) 2 Duo P8700 of CPU 2.53 GHz (2 CPUs), ~2.5GHz
  Memory: 4096 MB RAM
  Available OS memory: 4060 MB RAM
  Page file: 1641MB used, 6478 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11

  Card name: NVIDIA GeForce GT 230 M
  Manufacturer: NVIDIA
  Track type: GeForce GT 230 M
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0A28 & SUBSYS_FF501179 & REV_A2
  Memory display: 2781 MB
  Dedicated memory: 1007 MB
  Shared memory: 1774 MB
  Current mode: 1680 x 945 (32 bit) (60 Hz)

  Post edited by: Bradders_1

  Hello

  The forum already contains these discussions where notebooks will freeze after 5 or 10 minutes of play. Have you read them?

  Now it s not easy to say what causes this problem but first of all you need to install the latest driver of Toshiba display. Don t use non-Toshiba drivers, as they can cause the overheating!

  Also make sure that you use the latest version of the BIOS and it s useful to clean the laptop time using a jet of compressed air.

• Re: Satellite A660 - 11 M - Random freezing after the installation of recovery

  Hello

  I recently bought an A660 - 11 m, which I was happy for a few months and then it started to crash/freeze randomly in windows. I'd do something and then it just would freeze indefinitely, requiring a second 5 press the power button to turn it off manually. The fan and hard drives would continue to work if he did something, or they wouldn't be if I was not doing something at the time (this has happened four times). After that it's the only thing to do would be to reinstall the entire operating system by using the manufacturers recovery disk. The computer will then work fine for a few days or a few weeks (never more than 2 weeks) and it would be demanding full gel reinstall again. I had reinstall my programs every time but I stopped on the last 2 times and it made no difference.

  After that the computer crashed it would then refuse to boot into windows. It would be still stuck just at the moment where the sign of windows appears. I would like to know that he had crashed as the 4 colored dots appear. The computer would simply wants at this point, continually getting stuck there after the reboot of several manual. Once and only once it booted into windows on its own, but it took almost 30 minutes and the computer is very slow and unresponsive. The computer will sometimes start in safe mode, but it varies. I tried Startup Repair tool and all stages of system restore, but none of these work.

  I got to use Acronis true image10 and creating an image of the system which can then replace the whole computer in all 25mins. This saves me time, rather than wait 2 hours or whatever it is to reinstall the toshiba, but becomes quite ridiculous to have to keep re install every two weeks.

  I also tried to buy a stand-alone copy of windows 7 (while recording an image of the partition of toshiba in the case where I need) I think it might be due to all toshiba programs and other bits and pieces that are installed on the computer - it makes much faster startup, but the computer still crashes the same after awhile.

  I am sure its some ware conflicts or driver pretty hard, but I don't know what.

  Any help please!

  Rob

  Hi Rob,

  I m also do not know what exactly is the problem and I believe that no one here can say that just because it s just a user to user forum.

  Fact is that if you have already tried restore factory Toshiba recovery disc multiple times, it s not a software or driver issue because it s an image pre-tested by Toshiba.

  I guess it must be a hardware malfunction and therefore, you should contact a service provider for help. Guys can check your laptop and if it of under warranty, the repair is free.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• iPhoto 9.4.3 frequent crashes

  Could use the help of the community.  Recently affected by frequent crashes of iPhoto 11 9.4.3.  Understand what happens as well to others.  Not affected by other applications at this time, nor iPhoto crashes at any point in the past.  Can sometimes be intermittent and iPhoto may take up to a minute to open.  Seems to work normally today.  An overview of this would be much appreciated.

  Thank you!

  -----------------

  Background:

  23 000 pictures many of them annotated including keywords.

  Database of record hypermedia garden plant.

  Built and used for eMac G4 1.25 in 2004.

  Frequent use of search and change the information.

  Reported as 51 GB by iPhoto, 78GB by finder, 75GB after reconstruction (see below).

  Accident report requires javascript, but not apparently googlemaps.

  Same accident report Details each time, give or take, 20 occurrences.

  The accident report does not appear to be stored on the disk.

  Connected to the administrator privilege.

  Extensive experience in the use of the CPU by iPhoto noted in the activity monitor.

  System general memory 4 GB or more.

  Intel Core i5 at 2.8 GHz

  8 GB at 1333 MHz DDR3

  Drive internal 1 TB about 45% used

  OS X 10.8.5 (12F2560)

  iPhoto 9.4.3

  iTunes 11.4 (13/09/14, see below)

  Maybe in relationship:

  Problem started with impossibility to copy / paste from iPhoto to OS X mail.

  iPhoto is not plant at that time, not at the beginning.

  Photos of several devices that dates back to 2004.

  Duplication of metadata... prefix photo jpg file name... cannot be ruled out.  Two iPhones.

  Recently accepted iOS 9.0 and 9.1 on iPhone used for more recent photos.

  Found that iTunes 11 does not support iOS 9 so the phone is not synchronized recently at this time.

  iPhoto launches and recognizes the iPhone and downloads of photos, but differently.

  11.4 iTunes does not start downloading photos.  A change.

  Unsynchronized... a change... in time corresponds with the appearance of the accidents of iPhoto.

  We don't know if the recent photos of iOS encode geolocation in the metadata or not.

  We don't know if the recent photos of iOS are marked for the share on iCloud or not.

  Troubleshooting steps:

  Applications closing and restarting.

  repair permissions iPhoto appeared to complete normally.

  iPhoto database repair failed on an attempt and then seemed to complete normally.  Crashed immediately.

  iPhoto Library Manager executed normally and produced a library refurbished which opened.  iPhoto crashed immediately.

  GoogleMap and our files also seem to be missing on the mac.

  OS 10 disk utility repair permissions appears to execute but does not replace the incorrect permissions for hundreds of files in OS X.

  Disk utility.  Check the Green drive, ok.

  Disabled mcafee virus control.

  A lot of older versions of iPhoto 11 this meet right now:

  Huxly647 discovered this fix

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  BTW, excellent background on the issue.

• Windows Vista Basic has been freezing after sitting idle in normal mode and safe mode.

  Windows Vista Basic and was freezing after sitting idle in normal mode and safe mode. A few months ago, we had this problem and I replaced the hard drive. It was fine for a bit, but is distributed upward. The time that it will sit idle are shortened. I did a scan for malware and removed everything that was out there, obviously this isn't the hard drive and it is used for the most part just internet and e-mail, no new programs have been loaded since the new hard drive.

  original title: my laptop is running Freezin' upward...

  Hello

   
  I would ask through you the following method and the Coachman.
   
  Method 1:
  Check your hard drive for errors.
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
   
  Method 2: You can restore the system to a system restore point when the computer was working fine.
  The system restore.
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
   
  You can also check:
  Optimize Windows Vista for better performance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Frequent crashes on Vista - computer does not crash in SafeMode with network.

  Original title: Windows Vista crashes constantly.  Computer only works in safe mode with network.

  My computer freezes after a few minutes in normal mode.  The only way to make it work is in Mode safe mode with networking.  It started yesterday afternoon.  After the reboot (by now the down power button for 6 seconds) several times, I tried the Mode safe mode with networking.  I can access Internet, but some other functions, as the opening photos and sound do not work in Mode without failure.  Need help.

  Hello

  Many of them can be made in Mode without failure.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Crashing immediately after starting

  Hello

  My computer crashes immediately after start upward. Sometimes I have the chance to actually click on something, but usually it will freeze just upward before I can do anything whatsoever. I'm running it in SafeMode right now and it works completely fine. Any ideas on what I can do?

  Follow these steps to exclude material failures.
   
  Type of memory in the start search box, and choose Diagnostic memory. This will
  take a few minutes.
   
  In computer discs right click and choose Properties, then the Tools tab.
  then click on check now. Check the TWO boxes and then click Ok. Reset. This will take
  from one day to the next.
   
  After running chkdsk (what does the foregoing) checks file
  corruption by clicking on Start - Programs - Accessories - right click
  Command prompt and choose Run as administrator. Type
   
  sfc/scannow
   
  You can clean clean boot
  http://support.Microsoft.com/kb/331796
   
   
  --
  ..
  --
  "Casey Polon" wrote in message news: ee0fe058-d881-40f3-a9ef-c2c0ae5d0936...
  > Hello,
  >
  > My computer crashes immediately after start upward. Sometimes, I had the chance
  > actually click on anything, but more often it just freeze before
  > I can do anything. I'm running it in safe mode now and it works
  > quite well. Any ideas on what I can do?
  >
   
   

• Laptop keeps freezing after starting

  My laptop (HP pavilion tx2500) keeps freezing after the start, there is no error message warning that the thing just crashes without warning moments after startup, someone had this problem and know how to solve this problem.

  It could be a number of things, then we should try to eliminate some. Try to enter the HP utilities but endearing running tests of disk and tape on the F10 key, I think and hard memory.  Try to run Notepad without the battery installed and just the power adapter.  Try to use one piece of memory and try the two slots. Then try the other room and try the two slots.  If you don't have that one piece of memory, at least try the other location.  Try a hard reset:

  http://h10010.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01684768&product=1132551

• First Pro CC 2014.2 frequently crashes when switching between programs

  I started to program frequent crashes in first Pro CC 2014.2 Mac OS 10.10.3 on my Mac Pro 2013. This problem occurs when I switch to another program, say word or Adobe Audion back to Premiere Pro. I have the dialog box "we're sorry" and the application breaks down. About 50% of the time when this happens - when I reopen it the application that it hangs again - and then on the 2nd re - open it is successful. It's really annoying my workflow to worry about a crash whenever I have spend in AE or hearing. I uninstalled all the plugins, uninstalled and re-installed PP, erased the media cache and reset the preferences. Happening every day on this machine. FYI, I have an iMac 2013 running the same operating system that opened the same project files without this issue - it seems that it is specific to this machine for some reason any...

  Hello

  I suggest the following:

  • Hing-while-working-Mac-OS-x-10-9-and-later/ http://blogs.adobe.com/kevinmonahan/2014/09/10/Premiere-Pro-CC-freezing-on-Startup-or-Cras
  • Run a repair of permission to drive on your startup disk, and
  • Reset the folder permissions and ACL error | Apple support communities

  Thank you

  Regalo

• I have a mac with an SSD, it freezes after almost exactly 60 minutes

  I have a Mac with an SSD. It freezes after almost exactly 60 minutes and made for quite awhile - new version of iOS makes no difference

  What specific model Mac?

  Install a speed temperature and fan monitoring app like the following to see if overheating is the cause of the problem

  http://www.CrystalIDEA.com/Macs-fan-control

  • Note the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of ahttp://www.crystalidea.com/macs-fan-control start

• Why the back my mail list, text and phone iphone 6 freeze after upgrade ios10

  Why my list of e-mail, text and phone iphone 6 freezes after upgrade ios10?  Have you tried to turn it back on.  Becomes a real pain in the uknowwhat.

  I had the same problem at first but I was testing the first version of ios 10.  but the reason may be due to the low storage? If your storage space is ok please go to settings then general try to look for the software update again just to make sure that you use the latest version of ios usually there a few times an update immediately. If none of these solve the problem, try now button the power button and the home button at the same time (the screen of your iphone turns off a few seconds) touches both simultaneously when you see the apple logo on your screen if all else fails you can try connecting your device to itunes on a pc and run a quick diagnostic test? you go to itunes on a pc if you have already installed on your pc, laptop etc... Look at the upper left side... Click the help... Go to the bottom of the list to "Start the diagnosis" (make sure that all the test boxes have a tick and click ok to run the test) PLEASE NOTE your iphone you will need to be connected to the computer before hand... hope this will help you know if there is a problem, but when I came across this problem with my camera it was because my storage was almost full on my device and in icloud if This is the case then you need to maybe buy more storage or delete applications or games, you do not use this should help solve the problem of storage (if your device is low on storage)? hope this helps somehow.

  Nice day.