frequent "no signal" appears and restart the computer?

Similar Questions

• WMP 11 says connect burner and restart the computer

  WMP 11 has just started this problem when I click on the tab burn I it tells me to connect burner and restart the computer

  Hello

  1. do you get an error message when you try to download files?
  2. you have any third-party burning software installed on your computer?
  3. do you have Internet Explorer 8 is installed on your computer?

  Follow the steps mentioned below and check if it solves the problem with Media Player:

  Method 1: Run automated troubleshooting who diagnose and fix problems with your CD or DVD drive when trying to read or burn media automatically.

  See Your CD or DVD drive cannot read or write media

  Method 2: If the problem is new, run system restore to restore the computer to a point before the problem started.

  Refer to this article for help:
  http://support.Microsoft.com/kb/306084

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing. How can I save this monster?

  computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing.  How can I save this monster?

  Hello

  First, disconnect all the external devices connected to the computer, and then try to start and check what is happening. If the same happens, then you can try to start in safe mode and check if you are able to boot to the desktop. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• whenever I try to burn a cd with windows media player, a blue screen appears and restart my computer, what should I do?

  whenever I try to burn a cd, my computer goes to a blue screen and restarting my computer, what should I do?

  Hello

  Most likely, there is a problem with the CD/DVD drive. You can burn a data disc when
  don't use not WMP? Close all programs, put in a flammable disk and use the data method.
  If burning a data disc works then you have any add-ons for WMP12?

  -----------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Problem stopping and restarting the computer

  Hello

  I searched for so long for a solution, until I decided to post a question here.

  Whenever I have shut down my computer (via Start menu / alt + f4) the computer off first and perform a restart immediately afterwarrds.

  Well, this is what happens ALL the time. My computer stops and restarts, until I am led the newspaper to the page. On the page (after ctrl + alt + del) to connect, I keep having the same problem after pressing the off button.

  It's extremely frustrating because I have two options:

  Leave my computer running in locked mode (allowing my computer to heat and drain its battery)

  or

  Force a stop down by holding the power button down (damage my computer system - directed to a page (for running normal windows not start))

  Here is my contact information for the computer and all the...

  Lenovo G400

  (Standard plug)
  500 GB WD hard drive

  Windows 7 ENTERPRISE

  If you need more details let me know, so I can help you.

  Hope to hear something soon!

  MBT

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  Please use the restart configuration.  This will reboot your computer 3 times then save your work

• error kernel_security_check_failure when starting photoshop 10 Windows and restart the computer every time

  I got this

  error kernel_security_check_failure

  When you try to start Photoshop CC in Windows 10.

  I could open before but now I can never open it it always restart my computer.  I can always use other Adobe applications however.

  Hi pongsatit,

  Please see this thread of photoshop, "the kernel security audit failure" and let us know if this helps.

  Kind regards

  Assani

• After firefox is closed and then reopened, a message indicates that firefox is already running (in the background) and restart the computer.

  the window closes normally, then when I open it I get a message that Firefox is still running. I open the Task Manager and it does not appear in the application tab, but appears in the processes tab, where I "end process" I'd appreciate any help. Thank you

  See "hang out":

  • http://KB.mozillazine.org/Firefox_hangs

  See "Firefox crashes when you exit it:

  • https://support.Mozilla.com/kb/Firefox+hangs

• updates Windows returns to the start-up and restart the portable computer

  I put a clean image of windows 7 on my laptop and started running the updates of windows. There were 200 +. They download and restarted the computer and start the installation. The problem is now that he gets so far installs it fails and he returned to the starting point and then restart the laptop and the process begins again. They only way I can get back to my computer through safe mode. Any suggestions?

  Try excluding upgrades recommended to install important updates and only load the Important updates first which should be updated about 159 200 not.

  

  

  If you get hung up refer to the latter.

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  If looking for updates to hang on a current installation,

  Switch your windows update setting to never check the updates temporarily

  Restart the machine

  Then you download this from your download folder run from there.

  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not

  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

  updates before running from the downloads folder.

  Once it installs and restarts

  You can reset your updates affecting everything you had before default =...

  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,

  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You must scroll down for Joel SC post threads, it is the last answer on this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• restarting the computer

  When I start my computer, the message appears "Installation dates, do not turn the computer off" then the process starts and restarts the computer, the cycle continues. I don't even get to the main window, it keeps restart attempts to install updates

  I was able to solve the problem with a chat with HP technician. He proposed to restart the computer. When the first screen appears, press F8. then go on winodows repair. then you climb across the name, country etc. After that, you get the options to reinstall, repair, or restore to the last update. Restore the computer to the last point where he worked well. My problem has been resolved in this way.

• D3D9window crashes firefox. Need to restart the computer. Often!

  D3D9window stops fire fox download. Must close and restart the computer.

  Thanks much philipp. Problem and updated driver seems to have been fixed.

• I bought for the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer and restart production

  I bought the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer, and restart the product. Error 213:19 ".

  That was before Adobe moved to a payment structure based on participants. I need to be able to access these programs. Please provide a solution to the problem.

  order to C:\ProgramData\Adobe & C:\ProgramData\Adobe\SLStore folders full reapply administrators property back on the C:\ProgramData folder and then add everyone.

• Click on an application and sometimes restarting the computer

  I just bought a mac 2nd hand and by the title of this post it sometimes restarts the computer, however this is most frequent during the first 20 minutes of switching on the mac, after that it seems pretty stable.

  I'm on a processor I7, Macbook pro running 10.11.3 El Captain with 4 GB of ram

  I don't know if it's a hardware or software problem clues?

  Thank you

  Open the Console app.

  If journal list does not appear on the left, click view a list of journal.

  Click the triangle next to Diagnostic system reports. It should display the content of this category.

  Select the most recent kernel panic log. The name starts with core and ends with .panic.

  Select and copy the entire text of the panic begins after the line reading anonymous UUID.

  The copied log beyond panic at an answer here.

• When I click on Windows Update, he says that he cannot work and maybe I have to restart the computer.

  Hi, when I click on Windows Update it says that he cannot work and maybe I have to restart the computer. But when I do it always appears with the same. In services, it is configured to automatically update windows and is started. Can anyone help?

  Hello

  
  Method 1:
  You can run the fixit. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can run the fix provided in the link and check out them.
  Resolve security issues to protect and secure Windows automatically
  http://support.Microsoft.com/mats/windows_security_diagnostic/
  Method 3:
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: if bad sectors are found by running the check disk utility and if the attempt to recover bad sectors is verified when checking the disk for errors, data in the bad sector might be lost in the attempt to recover bad sectors.
  Method 4:
  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  See also:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
  It will be useful.

• W7 - Windows stop at 15%, stop/start pc update and cancel the update automatically before restarting the computer properly

  I recently bought an asus UL30A with W7. Since December, the system tries to install an update, stop installing at 15%, stop and restart the PC and automatically cancels the update, stop the pc again and restarts correctly. Watch the status of Update window, I've not opened updates, message,... all previous udpdates have been correctly installed.
  I tried a system restore by selecting various old success to restore update, but I have not one mentioning an error message that it cannot restore the system.
  Thank you for your help

  Hello

  References to Vista also apply to Windows 7.

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to do a system restore in Vista and Windows 7
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Internet Explore screen becomes milky and occasionally freezes forcing me to restart the computer

  Original title: freezes

  Internet Explore screen becomes milky and occasionally freezes forcing me to restart the computer.  now the Bureau is milky and freezes from time to time.  whenever the circle of 'thought' continues to 'think' without success.  Sometimes it fades, but most of the time I have to stop and restart.

  Hello

  Check if there is information in Event Viewer which may help us to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Method 1:

  Step 1:

  Try to start in safe mode and check if you are able to stop normally. To start in safe mode follow the link given below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2:

  If the problem does not occur in safe mode then boot to the desktop in normal mode and check that the third-party program is causing the problem. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Method 2:

  Also, try to optimize the performance of Windows 7. Follow the link below which evokes the different ways to optimize the operating system.

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.