From iOS 10

Similar Questions

• is it possible to downgrade from IOS 10.0.2

  is it possible to downgrade from IOS 10.0.2?

  Not at this stage. Apple does not support the downgrade of iOS and does what a signed version of the previous iOS one or two days after it is released.

  Sorry,

  GB

• Why print them from iOS Safari webpage is extensively large?

  I have a Web site, in including CSS, I specified "@media print {body {make-size: 10pt}...} '.

  It works fine when you print browsers portable (including the last Safari, Chrome and Firefox and for what it's worth, on a printer Epson, OSX 10.11.4...)

  When I print from iOS (9.3.1) Safari) the printing is plenty big!

  NB., printing is done via Wi - fi.

  NB., the site is fixed to "max-width: 31em '... and iOS Safari fills the document to the width, while laptop browsers comply with the specified font size and many leave spaces on either side of the printing block.

  I can't find this documented anywhere behavior. Is it possible to avoid it? (Like in CSS)?

  Solved the problem [unknown cause] by specifying quite literal "font-size: 1388888889" in"media @print.

  I'm thinking maybe the @media print must have "cascaded" an adjustment of the size of the font for @media * the screen-based * application for mobile devices... Who would have thunk?

• Contacts app on iPad from IOS 9 air crash

  Since IOS 9 contacts app starts for a second then shows contacts and then immediately disappears. After upgrading to iOS 9.3.3 no change. Restart the iPad does not help.

  App is open programms. Close the program and start don't help once again.

  BR

  Michael

  Hello, RobbyNRW_Germany!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your app is not open very long - it will close unexpectedly after only a few seconds. I see as you have updated your iOS, force to leave the app and restart your iPad, but none of these steps have fixed the problem for you. I rely on access to my Contacts app every day, so I definitely want to make sure yours is accessible!

  You already crossed some great troubleshooting steps to try to resolve the problem, so my recommendation here is the following. Each of these steps one to try in time and test after each is finished.

  1. Reset all the settings on your iPad under settings > general > reset > reset all settings. This removes any of your data, but it will return customizable settings (such as your background screen and display brightness, alert sounds and the Date and time settings) to the factory settings. It will also remove any Wi - Fi networks and saved passwords and delete all APN or VPN parameters used previously.
  2. Back up your iPad using iCloud or iTunes, and then restore the iPad to factory settings. If you don't know how to back up your iPad, the article below will guide you through the two iCloud and iTunes. Choose the option that suits you best.

     The backup of your iPhone, iPad and iPod touch

     Once you have saved it, follow the steps in the following article to restore your iPad with iTunes on a computer by default.

     Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  3. Configure the iPad like new (without restoring your backup, at least temporarily) when it goes to the default values. You can connect to iCloud, iTunes and App Store, iMessage and FaceTime with your Apple ID. Then test the app to see if it still crashes. If this is not the case, go ahead and restore your backup by following the steps described in the article in the link below.

     Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• LaserJet 4250 iOS Android: Eprint works from iOS, but not Android for 4250.

  Here's the scenario.

  I have an ipad and and 4 Galaxy both attached to the wireless company. There are 2 ethernet attached on the same local network printers. 1 is a 4250 and the all-in-one and another 8600. Two mobile devices have installed eprint.

  The iPad print two printers simply by specifying the IP address.

  The Android device prints to the 8600, but give an "Oops!" -The printer does not exist or you do not have access to this "message after the IP specification.

  The printer firmware is updated to the most recent and all protocols are enabled. There is no set of security.

  I'm trying to print at 4015 returns the same error opps in the Galaxy.

  There must be a difference in application between Apple and Google, or I forget something.

  Hello

  The Laserjet 4250 is not supported by the HP ePrint app, although it can run on iOS to make it work for any printer that is not officially suipported by the app there is no guarantees.

  The application is completely different and work differently on iOS compating Android app.

  You can find any printer supported below:

  http://support.HP.com/lt-en/document/c03722645

  If you have a Kitkat or a later version, you can try to use the Android build in solution, install the Plugin from HP Service of the store and check whether that can allow printing to the 4250:

  http://support.HP.com/us-en/product/HP-envy-7640-e-all-in-one-printer-series/6617267/model/6617268/document/c04024231/

  Hope that helps,

  Shlomi

• can I import photos from iOS iPhone 9

  I use LR5 attempt to import images from an iPhone iOs 9 ongoing. I don't see even the iPhone in the import options.

  Hi jimotto

  I forgot to mention that mobile Lightroom will only work with Creative cloud based Lightroom CC/5. just checked some devices run iOS9 and run Lightroom mobile as it should.

  When you connect your phone to Computer.Is Finder can detect your phone?

  There must be a connectivity issue

  ~ Assani

• Remove photos from ios devices.

  If I delete the photos on my ipad or iphone original will always be in my library icloud?

  I would still be able to access my photos, my icloud, on my ios devices, but do not want to store photos on them. I already have icloud configuration to optimize storage and photo stream is disabled on ipad, but turned on, on my iphone.  It's possible?

  The warning that I get when I delete a photo tells me that it will also be deleted in iCloud.

  have you thought about a service like Flickr? You can configure it to automatically download photos, and he keeps private until make them you public. It is also free and works on android, iOS, and office. (Given the iCloud limit size, that's what Ive started to use for my photos, you get a terabyte of space instead of 5 gig)

  And beyond their downloading, what you change on Flickr is not performing what is on your device and vice versa... I deleted the photos off my camera and had them again are on my flickr.

• Can I upgrade to iOS 10 directly from iOS 8 / 7

  I noticed that we have some users in my company, who are still on iOS 8 and same iOS 7. Their devices can be updated, but they just chose not to. I want to advise them to update, but my boss had a good question. They can upgrade DIRECTLY to iOS10? Or do I have to upgrade to major releases in between.

  Thank you

  Direct to iOS 10.

• can I switch from iOS 9 to iOS 6.1.6 with an old backup?

  I want to downgrade to iOS 6.1.6 using an old backup I have is it possible or can I go ahead and do it.

  N °

  (142682)

• Attachments are damaged when sent from iOS 9.3

  Hello!

  When I send an e-mail with attachments in PDF - PDF files is damaged at the level of the receiver.

  The account used is connected to an Exchange 2010 server - does anyone else have this problem and you may have a solution.

  I found a number of hits by the Gooleling the problem, but so far I have not found a solution.

  The question was repported to Apple support?

  Any input on this matter is much appreciated!

  Kind regards

  Karsten Stolten

  Try to update your device on latest iOS Firmware

  And also try increase Quota level in settings > Mail

• Restore from ios 7.1.2 to 6.1.3

  1. I want to go back to ios 6.1.3.
  2. In fact, I use an iphone 4 ios 7.1.2 runnung.
  3. I downloaded an image of original paragraph 6.1.3 http://appldnld.apple.com/iOS6.1/091-2610.20130319.Bedr4/iPhone3 , 1_6.1.3_10B329_ Restore.ipsw
  4. If I try to restore with iTunes by holding SHIFT and clicking on restore > select the 6.1.3 image

  should I get an ios 6.1.3 factory or it upgrades automatically to 7.1.2?

  Thanks for your time

  There is no way to downgrade.

• research problems internet iPad from iOS 9.2 update

  Hello

  Since updating to iOS 9.2 on my iPad I have trouble looking in the internet. After the reboot of the iPad a search will work perfectly well, all searches will be either requires really long or give me a timeout message.

  Tested browsers: Safari, Firefox, and Terra - all updated to the latest version

  testing of search engines: Google, DuckDuckGo and Ixquick

  In Firefox I can solve this problem by closing the tab and deleting history and cookies after every search. It does not help in Safari and Terra. For browsers, I have to restart the iPad. The problem began last week after I did the update of the system. At that time where Firefox was not installed at all - I did it hoping to find a browser that would work better with iOS 9.2. The only other apps that I installed last week were Onleihe and Bluefire Reader. I uninstalled both, that does not solve the problem. So I think there must be a bug in the update of iOS.

  Does anyone have similar problems?

  Thank you

  Wiebke

  Take a look at this Apple Support article:

  https://support.Apple.com/en-us/HT204051

  Reset your network settings.

  Settings - general - reset - reset the network settings

  Reset your device. This will not erase your data stored on the phone.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  https://support.Apple.com/en-us/HT201559

• How to upgrade ipod touch from ios 6.1.6 to 7 or 8

  Trying to find where to download ios7 or ios8 (as applicable) for an older ipod touch with ios 6.1.6.  Mc544ll/a model No.

  An iPod touch running iOS 6.1.6 is not capable of running iOS 7 or more.

  (137220)

• migrate from iOS code bb10 (unix)

  I used some codes c on ios access network settings.

  Just wonder if bb10 to migrate code to bb10 (linux)

  BB10 is not Linux, but based on QNX.

  Look at these pages http://developer.blackberry.com/native/reference/bb10/com.qnx.doc.neutrino.lib_ref/topic/about.html hollow and decide.

• When porting from iOS to WebWorks BB10/7, I have to keep phonegap?

  Hello

  I just get to work for an iOS phonegap app over ports at BB WW and I was wondering: is keeping phonegap is necessary or wise?

  The old app on iOS using phonegap 2.2 (recently upgraded to a very old version) and some plugins such as mapkit (uses that much, I can't just drag the mapping features - like view location on map and directions).

  Aura of the maintenance phonegap and using a version of BB of mapkit (when it exists) be easier than just porting to WebWorks?

  Also keep in mind that I want to port BB10 and OS7 and can - if it's easy - OS5 - 6 and I don't want to have very different code base for different versions of the BB OS.    I already have an older version of java application running on OS4 - 6, but it would be nice to put a new version for old devices also.

  I only did a webworks app but then I don't know much but so sorry if it's a bad question.

  Thank you

  PhoneGap/Cordova supports BlackBerry by calling WebWorks. Cordova doesn't support BB10 until 2.3.0 or 2.4.0, if so you need to update if you want to use. We're going to do also all Cordova the way standard and official to create HTML5 on BB10 applications, so stick to Cordova is sustainably good thing.

  However, I am not aware if there is a port on BB10 mapkit. Certainly, you can do the mapping, but you may need to take one of our samples of mapping and wrap it up in the same API if you want it to run perfectly.

  Now, porting to OS7 should be OK, but when you talk to will OS5 and 6, you may encounter more problems. At this point, those are very old devices. The engine of the browser in them is a good few years old - OS5 does not also WebKit. Memory and processors are half of what's available in devices OS7. You have to be very effective to make it work as you want.

  It is difficult to give really good advice without knowing your target market, demographics, and the region, and what kind of features you want to deliver (in addition to the maps). These factors will determine what kind of userbase you can expect on the different versions of the OS, and that it is better to port PhoneGap version for old phones, or update the Java version. Take a look at the BlackBerry World user stats that we publish and your own user base numbers. Generally, we found that users with the latest hardware equipment are also those who buy apps or spend money on them, and those with more recent or fairly recent devices is those who download. Make sure that you balance the available opportunity development times.