from RSD Protocol

Similar Questions

• Use the time protocol network on ciro to get the timestamp?

  I take a timestamp from a Protocol Server network time as NIST on a peripheral cRIO connected to the internet. How can I do this? There must be someone in our labview community who has done this before, or knows how to do. Examples of code valued

  Open mouth, insert foot. http://digital.NI.com/public.nsf/allkb/F2B057C72B537EA2862572D100646D43

  cRIO can now (8,6) automatically synchronize a SNTP server on a specified interval. If I put in place that it will automatically keep the right system clock and I can simply take the system time when I need a timestamp.

  Why isn't the search NOR as good as just using google to search the site of NOR? Why OR does not implement a google search? It's so easy, I have on my website.

• Having multiple computers using the server POPS via Thunderbird. A new computer has IMAP server and cannot send or receive emails via Thunderbird. Help

  With the help of Mozilla Thunderbird - multiple computers use the POP server, but a new computer uses the IMAP server. Mail or back does not work
  Can we change the IMAP POP server to make it easier. All my other computers POP and mail is perfect.
  What can I do?

  First question is your email provider does support IMAP protocol?
  If this isn't the case, that is why it does not work.
  If they do, IMAP is a protocol much better use to check email from multiple devices.
  There are a lot of good tutorials on the differences between POP and IMAP if you can do your own research on this.

  You don't change an account from one protocol to another.
  You delete the account and add back with the correct protocol.
  Thunderbird has a tendency to select IMAP as a default value. You need to stop right there and make the POP changes if that's what you want or need.

• Boolean functions accepts numeric values...

  Recently I got to know that all Boolean functions both accept numeric values. But what is the purpose of it?

  I found the exit of some random values while entering numerical values of Boolean functions...

  Thank you!!

  Best regards

  Adel SR

  srrashme wrote:

  I'm not clear. Can you please attach an example?

  What you don't understand?

  When the Boolean logic is used on integers, the logic is made on a basis by ILO.  I have to do this all the time to encode and decode data from specific protocols (some more wild than the others).  It is also necessary for many data (such as a CRC or Reed Solomon) controls and for encryption (AES, OF THE, 3DES).

  

• NOR can communicate the collector to Zigbee

  Hello

  I am developer for zigbee (wireless communication). Know that we have a collector using the USB key that we develop our own. The collector can collect data from its Protocol data average as we create in us - even. If we want to use the LABVIEW data received and send data using this software to our USB collector.

  I also try to configure our USB collector and success. But I don't know how to see the data and send the data.

  Can you explain more the labview in USB function, we can use this software.

  Thank you

  Concerning

  Joe Kid

  A search under ni.com/devzone gave lots of examples, in what follows, I have posted some of them:

  USB RAW Communication control in LabVIEW

  USB RAW Communication in bulk with LabVIEW

  VISA USB RAW Data Mode Get Interrupt example

  Christian

• Basic Firewall

  Hi all

  just now and with collaboration with Cisco I m right change a network client from the depths. A question was raised on the benefits of changing a core of 6500 to a core of firewall in the backbone of the network. I ve had my doubts about put a firewall in the middle of the network and with the 6500 just for the L2.

  Can someone give me some arguments for using a firewall to this customer base?

  PS: The customer as many users

  Hello

  The design with a basic firewall is one who loves a lot of safety engineers.

  However the design could easily meet the credentials of a smaller network but a large network with lots of flow and loads of sessions, the advantage of safety could have the disadvantage of the cost high in both the material and the man hours.

  in many cases, society has 'only' the new guarantee of an access list and good policy.

  In this case, you may be able to do both.

  The 6500 has a firewall blade

  http://www.Cisco.com/en/us/prod/collateral/modules/ps2706/ps4452/product_data_sheet0900aecd803e69c3.html

  I came across this in many cases where they just want to have control over access between networks, but I've never used the 6500 Slide since it was just overkill for the task at hand.

  So what are the advantages and disadvantages

  Firewall kernel

  PRO

  Excellent control over the traffic that comes and goes in the network

  VPN can be used internally

  Good security

  Lack of support from the protocols

  Disadvantages

  Costly in both equipment and man hours

  Risk of becoming a bottleneck (Slow/news sessions/s)

  Don't like the large stream through it.

  Lack of support from the protocols

  Switch/router Core

  PRO

  Transmission capabilities excellent traffic

  No problem with the wide-open spaces of data such as backups

  Multi protocol solutions

  Cost of devices

  Disadvantages

  Fewer security features? less control in network

  By the way more different types off of protocols which can avoid safety devices

  And then we have a third option

  Kernel firewall collapsed

  A kernel with firewalls in the junktions and a heart of switching / routed

  Pros

  A realistic way to safety in a wide network with flows multigig over large areas.

  Several units that gives if you pause cannibalizes the network in another place if you need to be to always follow the important parts.

  Disadvantages

  Can be an absolute nightmare to manage if it is not tightly controlled since the beginning

  Number of units

  many change points.

  Good luck

  HTH

• PAT/NAT and VPN through a PIX

  "PPTP through the PIX with Port address translation (PAT) does not work because there is no concept of ports in GRE"-this is an excerpt from a config PIX version 6.2 and below.

  1. how this problem has been fixed in 6.3? GRE is encapsulated in udp or tcp to use ports to follow the connection?

  2. is it "fixup protocol esp-ike" use the same technology - the source port created by the IKE protocol? -ISAKMP cannot be enabled when you use this command

  3. What is "isakmp nat-traversal? How is this different from fixup protocol esp-ike"

  Thank you

  RJ

  1. when the PIX sees outgoing PPTP (TCP 1723 port) packets it now opens holes for them to return, as well as opening a hole for the GRE packets, it has never done this before. The PPTP TCP packets can be PAT would be fine because they are TCP packets. GRE packets, I believe, are followed by the id field only tunnel in the package.

  2. we use the source port of the ISAKMP packet for ESP packets as well. The current limitation is that if you have this option, you cannot use the PIX to close the IPSec sessions, so you can not turn on ISAKMP any interface. You can also have only a single IPSec client internal to use this feature.

  3 NAT - T is a new standard for IPSec to work through a NAT device peers, because they detect changes of address during the negotiation of tunnel and automatically encapsulate packets in UDP 4500. This market allows the PIX and the other device (if it supports it) to automatically detect a NAT/PAT device between them. This differs from the "esp - ike correction '' that the PIX ends not in fact the IPSec tunnel with esp - ike, but it is the endpoint in nat - t.

• Call the stored procedure, and bind parameters by name

  Hello

  I use the Oracle ODBC 12 c driver to pass values from one Interface to our database Oracle 11.2. The Interface software collects data from modbus protocoll and calls a stored procedure. Right now my syntax to call the stored procedure looks like this:

  CALL procedure-name ('STRING', 'Timestamp as String', numValue1);

  It works very well. Now, I have to add a default setting to my procedure. To stay flexible to make other changes, I want to call the procedure and bind the parameters by name. Release 10.2.0.1.0 ISC ODBC Notes:

  Added support for the named parameter, binding the parameters by name. ODBC Oracle driver now allows the application to specify the parameters of a stored procedure by name, in the procedure call. Named parameters are to be used in calls to stored procedures and should not be used in other SQL statements.

  So, it shouldn't be a problem to use named notation, but how do I do this in ODBC? I tried like this, but oracle returns an ora-00936 error of missing expression:

  call procedure-name (paramName1 = > 'STRING',= paramName2 > 'Timestamp as String',paramName3 = > numValue1).

  
  

  Thank you for your help.

  Finally, I was able to find the error. The syntax of the statement was very good. The problem was caused by another declaration that I edited before and the error has not attracted Attention immediately.

  Thanks for reading and looking for an answer.

• Friday afternoon the fog... brain ambiguously defined columns?

  It is a Friday and I just want to go home because I can not for the life of see me why I get an error of ambiguous column defined here? :

  I associate myself with a main CMD querey which works very well in a small Protocol table downstairs...

  SELECT distinct
  CMD."BI_SRV_LOC_NBR" LIKE Loc1,.
  Protocol. "' BI_SRV_LOC_NBR ' AS Loc2

  Of

  (SELECT DISTINCT
  'BI_SO_MASTER '. "" BI_SO_NBR, "
  'BI_WRKFLW_TASKS '. "" BI_TASK_CD, "
  'BI_WRKFLW_TASKS '. "" BI_WORKGRP, "
  'BI_SO_MASTER '. "" BI_SO_STAT_CD, "
  'BI_WRKFLW_TASKS '. "" BI_WRKFLW_KEY, "
  'BI_WRKFLW_TASKS '. "" BI_WRKFLW_TASKS_KEY, "
  'BI_WRKFLW_TASKS '. "" BI_EVENT_DT_TM, "
  'BI_WRKFLW_TASKS '. "" BI_NEEDED_DT_TM, "
  'BI_SO_TYPE_REF '. "" BI_SO_TYPE_DESC, "
  'BI_WRKFLW_TASKS '. "" BI_CRITICAL_TASK_SW, "
  'BI_SO_MASTER '. "" BI_WO_WORKORD, "
  'BI_WRKFLW_TASKS '. "" BI_WRKFLW_TASK_SEQ_NBR, "
  'BI_TASK_REF '. "" BI_TASK_DESC, "
  'BI_WRKFLW_TASKS '. "" BI_WORK_EVENT_CD, "
  'BI_WRKFLW_TASKS '. "" BI_TASK_RMKS, "
  'BI_WRKFLW '. "" BI_WRKFLW_KEY, "
  'BI_RESOURCE_REF '. "" BI_RESOURCE_NM, "
  'BI_PERSONAL '. "" BI_FORMAT_NAME, "
  'BI_SO_MASTER '. "" BI_SO_FULL_NM, "
  'BI_SO_MASTER '. "" BI_OPEN_DT, "
  'BI_SO_MASTER '. "" BI_CLOSE_DT, "
  'BI_WRKFLW_TASKS '. "" BI_DURATION_DAYS, "
  'BI_WRKFLW '. "" BI_EVENT_DT_TM, "
  'BI_SO_MASTER '. "" BI_SO_DESC, "
  'BI_TYPE_SERVICE '. "" BI_PRIM_RATE_SCHED, "
  'BI_SO_DET_VIEW_1 '. "" BI_SO_TYPE_CD, "
  'BI_SO_DET_VIEW_1 '. "" ACCT_NBR, "
  'BI_SO_DET_VIEW_1 '. "" CUST_NBR, "
  'BI_RDG '. "" BI_DMD_MULT, "
  'BI_RDG '. "" BI_MTR_MULT, "
  'BI_SO_DET_VIEW_1 '. "" BI_MAP_LOC_NBR, "
  'BI_SO_DET_VIEW_1 '. "" BI_SRV_LOC_NBR ".
  Of
  ((("CIS54025". "BI_SO_MASTER" "BI_SO_MASTER"
  LEFT OUTER JOIN
  "xxxxx." ' ' BI_SO_TYPE_REF ' 'BI_SO_TYPE_REF '.
  WE
  'BI_SO_MASTER '. "" BI_SO_TYPE_CD "=" BI_SO_TYPE_REF. " ("' BI_SO_TYPE_CD")
  LEFT OUTER JOIN
  "xxxxx." ' ' BI_SO_DET_VIEW_1 ' 'BI_SO_DET_VIEW_1 '.
  WE
  'BI_SO_MASTER '. "BI_SO_NBR"= "BI_SO_DET_VIEW_1". ("' BI_SO_NBR")
  LEFT OUTER JOIN
  "xxxxx." ' ' BI_WRKFLW ' 'BI_WRKFLW '.
  WE
  'BI_SO_DET_VIEW_1 '. "" BI_WRKFLW_KEY "=" BI_WRKFLW. " ("' BI_WRKFLW_KEY")
  LEFT OUTER JOIN
  "xxxxx." ' ' BI_RDG ' 'BI_RDG '.
  WE
  'BI_SO_DET_VIEW_1 '. "" ACCT_NBR "=" BI_RDG. " ("' BI_ACCT")
  LEFT OUTER JOIN
  "xxxxx." ' ' BI_TYPE_SERVICE ' 'BI_TYPE_SERVICE '.
  WE
  'BI_RDG '. "" BI_ACCT "=" BI_TYPE_SERVICE. " ("' BI_ACCT")
  LEFT OUTER JOIN
  "xxxxx." ' ' BI_AR ' 'BI_AR '.
  WE
  ("BI_TYPE_SERVICE". "" BI_ACCT "=" BI_AR. " ("' BI_ACCT")
  AND ("BI_TYPE_SERVICE". "" BI_TYPE_SRV "=" BI_AR. " (("" BI_TYPE_SRV "))
  LEFT OUTER JOIN
  "xxxxx." ' ' BI_CONSUMER ' 'BI_CONSUMER '.
  WE
  'BI_AR '. "" BI_ACCT "=" BI_CONSUMER. " ("' BI_ACCT")
  LEFT OUTER JOIN
  "xxxxx." ' ' BI_PERSONAL ' 'BI_PERSONAL '.
  WE
  ("BI_CONSUMER". "" BI_PER_ACCT "=" BI_PERSONAL. " ("' BI_ACCT")
  AND ("BI_CONSUMER". "" BI_CUST_NBR "=" BI_PERSONAL. " (("" BI_CUST_NBR "))
  LEFT OUTER JOIN
  "xxxxx." ' ' BI_WRKFLW_TASKS ' 'BI_WRKFLW_TASKS '.
  WE
  'BI_WRKFLW '. "" BI_WRKFLW_KEY "=" BI_WRKFLW_TASKS. " ("' BI_WRKFLW_KEY")
  LEFT OUTER JOIN
  "xxxxx." ' ' BI_TASK_REF ' 'BI_TASK_REF '.
  WE
  'BI_WRKFLW_TASKS '. "" BI_TASK_CD "=" BI_TASK_REF. " ("' BI_TASK_CD")
  LEFT OUTER JOIN
  "xxxxx." ' ' BI_TASK_ASG_SCHED ' 'BI_TASK_ASG_SCHED '.
  WE
  'BI_WRKFLW_TASKS '. "" BI_WRKFLW_TASKS_KEY "=" BI_TASK_ASG_SCHED. " ("' BI_WRKFLW_TASK_KEY")
  LEFT OUTER JOIN
  "xxxxx." ' ' BI_RESOURCE_REF ' 'BI_RESOURCE_REF '.
  WE
  'BI_TASK_ASG_SCHED '. "" BI_RESOURCE_ID "=" BI_RESOURCE_REF. " "" BI_RESOURCE_ID ".
  WHERE
  'BI_WRKFLW_TASKS '. "BI_WORK_EVENT_CD" = "COMP"
  AND ("BI_TYPE_SERVICE". "BI_PRIM_RATE_SCHED"= "001"
  (OR 'BI_TYPE_SERVICE'. "BI_PRIM_RATE_SCHED" = "001NS"
  (OR 'BI_TYPE_SERVICE'. ' BI_PRIM_RATE_SCHED '= '002'
  (OR 'BI_TYPE_SERVICE'. "BI_PRIM_RATE_SCHED"= "010"
  (OR 'BI_TYPE_SERVICE'. "BI_PRIM_RATE_SCHED" = "010NS"
  (OR 'BI_TYPE_SERVICE'. ' BI_PRIM_RATE_SCHED '= '020'
  (OR 'BI_TYPE_SERVICE'. "BI_PRIM_RATE_SCHED" = "020NS"
  (OR 'BI_TYPE_SERVICE'. ' BI_PRIM_RATE_SCHED '= '085'
  (OR 'BI_TYPE_SERVICE'. "BI_PRIM_RATE_SCHED" = "085I"
  (OR 'BI_TYPE_SERVICE'. "BI_PRIM_RATE_SCHED" = "085NS"
  (OR 'BI_TYPE_SERVICE'. "BI_PRIM_RATE_SCHED"= "086"
  (OR 'BI_TYPE_SERVICE'. "BI_PRIM_RATE_SCHED" = "086NS"
  (OR 'BI_TYPE_SERVICE'. "BI_PRIM_RATE_SCHED" = "SRC"
  (OR 'BI_TYPE_SERVICE'. "BI_PRIM_RATE_SCHED" = "RHCNS"
  (OR 'BI_TYPE_SERVICE'. «BI_PRIM_RATE_SCHED "="RHR ""
  (OR 'BI_TYPE_SERVICE'. ("" BI_PRIM_RATE_SCHED "=" RHRNS ")
  AND ("BI_SO_TYPE_REF". "BI_SO_TYPE_DESC" = "end $Billing point"
  AND "BI_TASK_REF". ' BI_TASK_DESC ' = '$Billing reading/Service check.
  (OR 'BI_SO_TYPE_REF'. "BI_SO_TYPE_DESC" = "$Cutoff"
  AND "BI_TASK_REF". "BI_TASK_DESC" = "$déconnexion meter.
  (OR 'BI_SO_TYPE_REF'. «BI_SO_TYPE_DESC "=" $De-energize/Re-energize "»
  AND "BI_TASK_REF". "BI_TASK_DESC" = "$désexcite Service"
  (OR 'BI_SO_TYPE_REF'. «BI_SO_TYPE_DESC "=" $$ disconnect Service»»
  AND "BI_TASK_REF". "BI_TASK_DESC" = "$déconnexion meter.
  (OR 'BI_SO_TYPE_REF'. "BI_SO_TYPE_DESC" = "$Endpoint Service"
  AND "BI_TASK_REF". ' BI_TASK_DESC ' = '$Field in action.
  (OR 'BI_SO_TYPE_REF'. «BI_SO_TYPE_DESC "="$Rate change ""
  AND "BI_TASK_REF". «BI_TASK_DESC ' = ' count$»
  (OR 'BI_SO_TYPE_REF'. «BI_SO_TYPE_DESC "="$nouvelle residence Service»"
  AND "BI_TASK_REF". «BI_TASK_DESC ' = ' count$»
  (OR 'BI_SO_TYPE_REF'. "BI_SO_TYPE_DESC" = "$reconnecter Service"
  AND "BI_TASK_REF". «BI_TASK_DESC ' = ' count$»
  (OR 'BI_SO_TYPE_REF'. «BI_SO_TYPE_DESC "="$Service change ""
  AND "BI_TASK_REF". «BI_TASK_DESC ' = ' count$»
  (OR 'BI_SO_TYPE_REF'. "BI_SO_TYPE_DESC"= "$Svc audits/10 Yr Chg"
  AND "BI_TASK_REF". ' BI_TASK_DESC ' = '$Svc field audit work.
  (OR 'BI_SO_TYPE_REF'. "BI_SO_TYPE_DESC" = "use $Zero Check" point of termination
  AND "BI_TASK_REF". ' BI_TASK_DESC ' = '$Zero use check reading/Svc.
  (OR 'BI_SO_TYPE_REF'. «BI_SO_TYPE_DESC ' = 'verification of use/Svc $Zero»'
  AND "BI_TASK_REF". ("" BI_TASK_DESC "=" use the audit Fld Wrk $Zero ")
  AND ("BI_WRKFLW_TASKS". "" BI_EVENT_DT_TM "> = TO_DATE (1 January 2014 00:01:01 '," HH24:MI:SS DD-MM-YYYY ")
  AND "BI_WRKFLW_TASKS". ("' BI_EVENT_DT_TM" < TO_DATE (January 4, 2014 00:00:00 ', HH24:MI:SS ' DD-MM-YYYY "))
  ) CMD.

  LEFT OUTER JOIN

  (SELECT 'BI_SRV_LOC_NBR' FROM 'BI_SRV_LOC') Protocol

  ON CMD. ' BI_SRV_LOC_NBR '= Protocol. BI_SRV_LOC_NBR ".

  Hello

  In the command line, the next column view, the names are used 2 times each:

  NI_EVENT_DT_TM

  BI_WRKFLW_KEY.

  ... (SELECT DISTINCT

  'BI_SO_MASTER '. "" BI_SO_NBR, "

  'BI_WRKFLW_TASKS '. "" BI_TASK_CD, "

  'BI_WRKFLW_TASKS '. "" BI_WORKGRP, "

  'BI_SO_MASTER '. "" BI_SO_STAT_CD, "

  'BI_WRKFLW_TASKS '. "' BI_WRKFLW_KEY ', - 1

  'BI_WRKFLW_TASKS '. "" BI_WRKFLW_TASKS_KEY, "

  'BI_WRKFLW_TASKS '. "' BI_EVENT_DT_TM ', - 1

  'BI_WRKFLW_TASKS '. "" BI_NEEDED_DT_TM, "

  'BI_SO_TYPE_REF '. "" BI_SO_TYPE_DESC, "

  'BI_WRKFLW_TASKS '. "" BI_CRITICAL_TASK_SW, "

  'BI_SO_MASTER '. "" BI_WO_WORKORD, "

  'BI_WRKFLW_TASKS '. "" BI_WRKFLW_TASK_SEQ_NBR, "

  'BI_TASK_REF '. "" BI_TASK_DESC, "

  'BI_WRKFLW_TASKS '. "" BI_WORK_EVENT_CD, "

  'BI_WRKFLW_TASKS '. "" BI_TASK_RMKS, "

  'BI_WRKFLW '. "' BI_WRKFLW_KEY ', - 2

  'BI_RESOURCE_REF '. "" BI_RESOURCE_NM, "

  'BI_PERSONAL '. "" BI_FORMAT_NAME, "

  'BI_SO_MASTER '. "" BI_SO_FULL_NM, "

  'BI_SO_MASTER '. "" BI_OPEN_DT, "

  'BI_SO_MASTER '. "" BI_CLOSE_DT, "

  'BI_WRKFLW_TASKS '. "" BI_DURATION_DAYS, "

  "BI_WRKFLW". "" BI_EVENT_DT_TM ", -2

  'BI_SO_MASTER '. "" BI_SO_DESC, "

  'BI_TYPE_SERVICE '. "" BI_PRIM_RATE_SCHED, "

  'BI_SO_DET_VIEW_1 '. "" BI_SO_TYPE_CD, "

  'BI_SO_DET_VIEW_1 '. "" ACCT_NBR, "

  'BI_SO_DET_VIEW_1 '. "" CUST_NBR, "

  'BI_RDG '. "" BI_DMD_MULT, "

  'BI_RDG '. "" BI_MTR_MULT, "

  'BI_SO_DET_VIEW_1 '. "" BI_MAP_LOC_NBR, "

  'BI_SO_DET_VIEW_1 '. "" BI_SRV_LOC_NBR ".

  Of...

  Of all the columns in the CMD, looks like BI_SRV_LOC_NBR is used outside of CMD.  Unless you intend to miodify this query and use more outside the CMD CMD columns, you can simply delete everything except this great SELECT clause BI_SEV_LOC_NBR.

• Name of the Protocol have disappeared from the link tooltip

  Previously, when I hover over the link on a page, it showed tooltip like this:
  http://www.Google.com/
  but now it shows www.google.com. It's confusing, how to get back a normal behavior?

  The Protocol (http://) was removed from the URL in the location bar for http:// only pages in Firefox 7 and newer versions. Secure pages will always show the https:// Protocol. This can be confusing for some users. There is also a bug known, where if you copy the URL after selection of the awesome bar dropdown (but before loading the page) it does not include the http:// part.

  Users can revert to the old behavior by setting browser.urlbar.trimURLs to false in about: config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Search = browser.urlbar.trimURLs
  4. Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
  5. close the topic: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Serial cable using IrDA protocol does not work correctly. Steve Stephens, * address email is removed from the privacy *.

  The difficulty it Center Microsoft said that my serial cable using IrDA protocol does not work properly.

  Appreciate any suggestions on how to solve this problem.

  Steve Stephens, * address email is removed from the privacy *.

  Hi, Steve Stephens.

  Did you run the fixit available in the link below?
  Hardware devices do not work or are not detected in Windows

  Method 1: Check for any error message in Device Manager

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  (a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  (b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Device Manager, find your device, and then double-click the device name.

  (d) If an error code has been generated, the code appears in the status area of the device under the general tab

  
  Method 2: download and install all available Windows Update

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Method 3: Download and install SP2

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

• Cannot remove popup Traffic Swarm. Popup is: the properties are jpeg HyperText Transfer Protocol, it is from Traffic Swarm

  Original title: pop-up traffic Swarm: the properties are jpeg HyperText Transfer Protocol, it is from Traffic Swarm

  I get this traffic Swarm popunder that I can't get rid of

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I get this popunder when I try to use some software that I have. The properties are jpeg HyperText Transfer Protocol, than it is from Traffic Swarm. I asked to remove, but they do not respond. It is so powerful that I can still use my software more. You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Boot in safe mode and and uninstall with revo: http://download.cnet.com/Revo-Uninstaller/3000-2096_4-10687648.html.

  If this does not work, run a virus with malwarebytes scan: http://teengeek.freehostingcloud.com/help/scanforviruses/

  If this does not work, I'd get a qualified person to delete all the files and registry keys relating to this software.

  Visit my Web site: teengeek.freehostingcloud.com

• Error Protocol in the package received from the initiator

  I have a Windows 2008 R2 virtual machine connected to a PS of the Group (6210xs and 6000). I have 4 volumes iscsi LUNS for Windows data, two on the 6210 and two on the 6000. The vm is on the 6210. We have implemented the 6210 back towards the beginning of the year, and all volumes of data have been implemented with MPIO 5 or 6 months ago.

  This morning, one of the 2 data on the 6210 disappeared. Windows Disk Mgmt did not show it online or offline, but the windows iscsi initiator showed as connected LUNs. I disconnected the lun and reconnected and immediately handed volume online and has been fully accessible. The monitor EQ had a message to info about the disconnect with "error Protocol in the package received from the initiator" at the end of the message. 2 seconds later, the logical unit number reconnected.

  It sounds like a problem with the initiator of windows rather than a problem of EQ, but I thought I'd check here in any case. It is interesting that it happened only to 1 volume of 4. This volume has been connected since May with no problems until today, and I do not have no changes to configuration since May. Are both the vNIC multichannel vmxnet3 with all the same settings (jumbo frames enabled, unloading of the disabled, numbers for Rx rings, etc.)

  Any ideas on all the settings should I check or change, especially with the network cards for?  I'll probably post this on technet, too.

  Thank you.

  Tim

  Hello

  The problem with iSCSI optimization is that it keeps track of connections.  However, the table moves periodically as you have noticed, the connections.  The switch fw does not understand that.  With each stroke he follows the new session and retains the old.   The buffer allocated for it is rather low.  According to FW versions on the switches, this could be as little as 256 connections.  Over time, this buffer is overrun.  The older of the switch that made to block any new connection iSCSI on port 3260.   So turn it off is the best option.

  Re: trunk. In general the ISCSI traffic is burst, so when you look at the history of the traffic it appears wrong, because he gets on average over time.  So, I would add at least two additional ports to be sure.

  Kind regards

  Don

• Strange behaviour of PIX - cannot access all protocols from high to low security

  I have a 515 with four active interfaces (material of three and a VIRTUAL local area network). I have a DMZ interface with security level equal to 6. Inside network (Security 100) I can only access hosts on the DMZ using the HTTP protocol. Ping and telnet do not work while they do not work when I am connected directly to the network DMZ. The DMZ network is flat and all the guests have the PIX as their DGW. Here is a copy of the current configuration. Am I missing something? This shouldn't be so hard!

  Thank you

  6.3 (4) version PIX

  interface ethernet0 car

  interface ethernet1 100full

  logical interface ethernet1 vlan11

  interface ethernet2 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif ethernet2 grandhome securite6

  nameif vlan11 comments security99

  hostname DBADAPIX

  clock timezone IS - 5

  clock to summer time EDT recurring

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  Name xx.xx.167.101 QualityAirPC_OUTSIDE

  name 192.168.100.90 QualityAirPC

  rdvvpn ip 172.18.34.0 access list allow 255.255.255.0 192.168.1.0 255.255.255.0

  172.18.34.0 IP Access-list sheep 255.255.255.0 allow 192.168.1.0 255.255.255.0

  outside_access_in list access permit tcp any host QualityAirPC_OUTSIDE eq https

  pager lines 24

  opening of session

  timestamp of the record

  debug logging in buffered memory

  Logging trap errors

  ICMP allow all outside

  ICMP allow any inside

  Outside 1500 MTU

  Within 1500 MTU

  grandhome MTU 1500

  IP address outside xx.xx.167.97 255.255.255.248

  IP address inside 172.18.34.1 255.255.255.0

  IP address 192.168.100.1 grandhome 255.255.255.0

  Comments from IP 192.168.10.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  ARP timeout 14400

  Global 1 interface (outside)

  interface of global (grandhome) 1

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 172.18.34.0 255.255.255.0 0 0

  NAT (grandhome) 1 192.168.100.0 255.255.255.0 0 0

  NAT (guest) 1 192.168.10.0 255.255.255.0 0 0

  static (grandhome, external) QualityAirPC_OUTSIDE QualityAirPC netmask 255.255.255.255 0 0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 xx.xx.167.102 1

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp - esp-md5-hmac rdvvpnset

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  rdvvpnmap 10 ipsec-isakmp crypto map

  card crypto rdvvpnmap 10 correspondence address rdvvpn

  card crypto rdvvpnmap 10 peers set xx.xx.71.66

  rdvvpnmap crypto 10 card value transform-set ESP-DES-SHA

  life safety association set card crypto rdvvpnmap 10 seconds 43200 4608000 kilobytes

  rdvvpnmap interface card crypto outside

  ISAKMP allows outside

  ISAKMP key * address xx.xx.71.66 netmask 255.255.255.255

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 1 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  dhcpd address 172.18.34.100 - 172.18.34.199 inside

  dhcpd address 192.168.100.100 - 192.168.100.109 grandhome

  Dhcpd address 192.168.10.100 reviews - 192.168.10.199

  dhcpd dns 64.x.37.x.39.140.42

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd outside auto_config

  dhcpd allow inside

  grandhome enable dhcpd

  Comments enable dhcpd

  to allow pings to return, you must allow traffic. It is not allowed by default.

  apply the acl to the dmz interface in.

  access-list dmz-> in permit icmp any any echo response

  access-list dmz-> in permit icmp any one time exceed

  access-list dmz-> in permit all icmp all inaccessible

  If you try to ping at the interface of the demilitarized zone from the inside, you can't. Telnet to this interface is not allowed either unless through an ipsec tunnel. You should be able to telnet to a server in the zone demilitarized without problem.

• Lookout does support protocol SOTC from Motorola?

  Can someone tell me if Lookout supports the Motorola SOTC communication protocol?  It seems that this forum is the only technology available support of NOR.  Thanks in advance.

  Bill

  He does not support the SOTC, but MOSCAD ACE3600 does support MODBUS. We have several systems using MODBUS and platforms without any problems.

  Mark