From the start I get network error message: DHCP error event ID 1003 began ID1002.
I have Compaq Presario SR1220NX, Windows XP, SP3. With the help of Verizon FIOS Wiresless and AOL Broadband Internet service provider. When starting up I get the message of network event ID 1003 errors and 2 times I got ID 1002. I was on the phone with Verizon, restarted Wiresless router and they did some other configurations. Looks after the router restarts and stuff and revive his party. But after a while he comes back again after cold reboot. Services DHCP is set to automatic. I don't know that he always comes to the top. Any help would be appreciated.
Hello
You can check these links:
http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=1003&EvtSrc=DHCP&lcid=1033
I suggest you to contact your Internet service provider to verify the DHCP in your router settings.
Tags: Windows
Similar Questions
-
From the start I get message "Auto Detect (input analog)
I have a HP Pavillion T560A connected to a Dell monitor. When I turn on the PC I get a message: auto detect (analog input). In energy saving mode. Press the computer's power button or any key on the keyboard or move the mouse. When I do that nothing happens. How can I start up? Jim cordially
It has not been used for four months but was only servcied a week pprior to that and worked well. The fan turns on and the hard drive seems to be working. I tried to presisng the F8 key as I turn on but to no avail
Sorry but no. I took it for an exoert which he cleaned up and said it was contacts simply dirty - works perfectly now
-
Message hole bed hardware malfunction call your hardware support vendor.
NMI: Parity check/Memory Parity Error
The system is shut down
Now it's on a blue screen and then I have to hold the power button until the computer turns off. Nothing was wrong with her until my Bilkin wirless card broke and I had to reinstall the Witch of a down preveusly internal wireless card so I shot, but it worked very well until I had to stop so we could go out and then when I turned on the computer laptop back it keeps in past. now is this a problem with the wireless card or my memmory?
With it this way I can get on only in plain old safe mode not safe mode with networking. Maybe that I need to take the card out and try it and if it works I think I'm stuck hang the old wiring cat 5 and goining this way right or wrong? What is a body to do? I have not I hope so gruff like to be wireless, I mean after all that's why I pay big bucks so I can go wireless.
Thanks in addvance here you guys for the excellent work to help us poor people in this way.
jimmy1950hailey
Jimmy
If I understand your question, yes get out the wireless card and try. If that too fails, contact Dell or your local computer repairer.
-
Original title: purchased the store Apps download not and said don't enter the folder TWUNI no such thing
Bought the store Apps download not and says not to enter the folder TWUNI no such thing
I tried these tips. Still won't download apps. When I go to the store, it immediately says I have 15 updates to install. I click on the link updates and I get a screen that says "install Apps" with "Finance, weather, camera, music, new, ' Mail, calendar, all the people, and..." "", SkyDrive, travel, drive, cards, Sports, games, Photos, video, and Bing. They start with a "Download" message and after 5 minutes they all change to "pending" and does no progress. Now what? How is it "just doesn't work"?
-
From the start, I get a message saying 'cannot load personal settings.
original title: my settings aren't available!I turned on my computer this morning, after using it yesterday and entered my password to access my settings. A screen pops up and says "unable to load personal settings" and something about a registry file format. This is my work computer and I need my settings as all my documents are here. I'm guest now mode without access to anything.
Hi KellyMK,-What is the accurate and complete error message that you receive?This problem can occur if the current user profile is damaged.Check this link for more information: -
Hi guys
You try to download a new IOS for my CISCO ASA using TFTP I get the following error
Access tftp://189.206.211.24/asa825-33-k8.bin...!
% Error copy tftp://189.206.211.24/asa825-33-k8.bin (this image is not valid for this platform)
-Anyone has the same error.
Also, I have tryied using the ASDM but I get the same error.
Kind regards.
Hello
As says the Description This is not for model ASA5580.
Click on the link connected with your account
http://software.Cisco.com/download/type.html?mdfid=281191384&flowid=4378
Then choose the software Adaptive Security Appliance (ASA)
Then navigate through the drop-down list on the left
Provisional-> 8-> 8.2.5 interim
And you will get the visibility (click to enlarge)
-Jouni
-
When you try to install Dreamweaver CS5 to my drive, after I entered my serial number, then my email (Adobe ID) and the password, I get an error message!: Network error. Please try again later. What should I do now?
This is a user forum. You don't talk about support from Adobe here.
- Install you CS5 on 2 computers but don't turn off a
- You have more access to other computers.
Contact Adobe customer service via Chat online with Activation.
Click on the blue again "need help?" button.
Nancy O.
-
I try to print from quicken and I get an error message that says that I have to be in the mode of administration and run restore pdfdriver.bat. I don't know what is a mode of administration, nor I know what is a pdfdriver.bat. Can anyone help?
Hello
1. what operating system do you use?
2. what web browser do you use?
3. have you made changes on your computer?
4. What is the brand and model of the printer?
5. are you able to print from other applications?
When a printer is installed, members of the Administrators group on the computer are given permission to manage the printer by default. If you have an administrator account, you can probably change the printer properties. Otherwise, you must obtain permission to manage the printer before you can change the properties of the printer.
Method 1:
If you are using, I suggest you send the link to learn how to open a session as an administrator.
How can I connect as an administrator?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-log-on-as-an-administrator
Method 2:
I also suggest you to see link and check.
Error when printing to a PDF file: PDF driver is not found
Cannot print from Quicken
http://Quicken.Intuit.com/support/help/not-able-to-print-from-Quicken/GEN82237.html
-
I just downloaded and installed the Lightroom update version (5.7). When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b). It happened the last time I upgraded and sent me a few files that has corrected the problem. Can help you. With our thanks. John
-
Wireless connections
I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?
Hello
I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?
You can also try the following methods and check if it helps.
Method 1:
Update a network adapter driver.
Method 2:
Troubleshoot network adapter problems.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
-
Loading of the Internet
Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site. The site requested is either not available or cannot be found. "Please try again later ' this happens for all sites, I try to download from... Please help.Hello
To work around this problem, follow these steps:
1. start Internet Explorer.
2. on the view menu, click Internet Options.
3. on the Advanced tab, clear the do not save encrypted pages on the
disk check box.
4. go to the page where you received the error.
5. right click on the file link, click on save target under, select one
destination and then click Save.
Good luck! -
My laptop with Windows XP home (2002, upgraded to SP3), crashed after almost 10 years of perfect service. Then I reinstalled my OS (not OEM, bought and paid for a full installation of Windows XP Home, 2002), and after 3 hands hours hardware controllers and drivers, installation was finally able to connect to internet to make updates on Windows XP and hardware. Arriving at Windows Update of the site, I realized that I couldn't do web updates up-to-date, because my old version of Windows. It will not be updated to SP3, because I need SP1 or higher. So, I tried to download and install SP1a. Error says that I can not reach the server. So, I download SP1a on my other computer, burn a CD and try to install SP1a directly from CD. Now, I get an error message stating "error installing SP1a, unable to reach the server. Try again when you have access to the web... Hello! I'm not trying to install from the web... why this message? I even made my computer has been getting a good connection ethernet, just in case my computer needed to communicate with? While my computer has been updated by CD.
It's probably something simple, but I'm frustrated. Help when the first thing I see on the Microsoft Update site is a special page, telling me that I am not able to update Windows. Help, please!
You must use this upgrade path:Gold XP to XP SP2 to XP SP3.Note that installing SP1a is TOTALLY USELESS! (Not only that, the file available these days is EVIL, because you knew.)Here are the detailed instructions:1. download the installation files from SP2, SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:
http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)
http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)
(You can TOTALLY ignore the message "intended for it professionals"!)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)
http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)
2. disconnect Internet.
3. temporarily disable the automatic updates.
4. install SP2. Restart twice.
5 install the SP3. Restart twice.
6 switch to IE8. Restart twice.
7 install an Antivirus software.
(What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).
8 make sure that firewall Windows is activated (it should be).
(Now you can physically reconnect to the Internet.)
9 visit Windows Update to download and install only the critical security updates.
10 re - enable automatic updates.
After the back if you need guidance.
-
Hi, I replaced the motherboard in my computer, it seems to work very well, but when you turn on the computer I get an error message:
\SYSTEM32\NTOSKRNL.exe is missing or damaged At this stage there is no cursor, or what I can do to get in my area on my drive, it's as if the computer shuts down and this message does not disappear.
I am running Windows XP operating system.
Is there a solution for this?
Thank you
Hello
· What is the number and the model of the computer?
· What is the service pack installed on the computer?
Follow the steps in the link below and check if this can help: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477
-
"original title: NTA0104.dll.
whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?
HM
Hello
Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If the error persists after scanning use this program to out startup
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.
-
When I click on all the files I get an error message says "without this user interface supported 'n I can't open any files or folders.
A moderator is spent it to search in the Forum, the folders and files Windows of Feedback Forum.
HI, Luvnmidlife,
Windows operating system?
It is the unique user on the system account?
Create a new account to use for testing purposes. See if the problem persists using the new account
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
Maybe you are looking for
-
HP Mini 1000: hp mini 1000 (1151nr) bios password
Please help me I get the current password CNU928B2Q0 on my HP mini 1000 thanks
-
I can boot from micosd on 2 8 black?
Hello I want to spend my recovery partition to a usb or microsd cable in order to free up space on my 2 8 black. I can do on my 8 GB microsd? I'll be able to boot from it in the future, or should it be on a USB?
-
Ein little Hallo an Alle, ICH habe seit 4 days Acer Predator G3 und bitte - 605 den um Hilfe. In der sehr mangelhaften von Acer ist der Zugriff WLAN showers, geht aber nicht documentation. ICH habe auch viel gegoogelt, aber nicht richtig was found. I
-
Wireless network card problem code 13
I had trouble with my network using wireless for the past weeks. When I went to see what was wrong with my wireless adapter, it was no problem, but the 6to4 card and adapters itap had an error 13 code. I tried uninstalling and reinstalling, but my wi
-
Error 1606: 'could not access location network & AppData%.
Please help with Error 1606, "could not access location network & APPDATA%\.» Can someone please provide a fix?