Front side bus and processor very slow speed on the Satellite 2800

Similar Questions

• Mac keeps restarting and is very slow running

  Why not keep restart my mac and works very slow since I installed El Capitan?

  Most likely because you upgraded an already dysfunctional system without the first fix. Or your HARD drive may be faulty.

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

  When you get it working properly, and then download and reinstall OS X El Capitan 10.11.3 Combo Update.
  

• Since this morning my Thunderbird is not - responding whenever I try to open or send an email it is not responding and is very slow and I have to close it. Difficulty?

  Since this morning my Thunderbird is not - responding whenever I try to open or send an email it is not responding and is very slow and I have to close it. I tried to delete the global-messages - db.sqlite but it does nothing. Any ideas?

  Check if this happens in safe mode:

  • Safe mode

  Did you try to compact your email?

  • Compact

  And the record of repair?

  • Click with the right button of the mouse on Inbox > > Properties > > File Repair

• I've updated my xperia neo to andriod 4.01, my laptop is now very slow, how do the previous version of andriod?

  I've updated my xperia neo to andriod 4.01, my laptop is now very slow, how do the previous version of andriod?

  you have 2 options

  (1) bring it to a Sony repair center

  http://www.sonymobile.com/global-en/support/contact-us/

  or

  (2) use flashtool for downgrade

  Don't forget to mark the correct answers & useful answers

• Fan noisy and slow speed for the Macbook Air with 10.11.4

  I hope you can help me.

  I upgraded 10.11.4 on my Macbook Air a couple of days. It is a model of 2013 Mid, 1.7 Ghz Core i7, 8 GB of RAM.

  I don't know exactly what my last update was - but was El Capitan any.

  I tried LANDAU and SMC resets.

  Previously, she has chugged along fine. The fan was quiet most of the time - only hit on when I used Lightroom.

  Now, the fan kicks on regularly, most of the time actually. And it's MUCH slower. Very lag sometimes when you type in Wordpress, for example. And lightroom is much slower. Also, when I use FaceTime, video often turns itself on and off--with a message informing me that it will resume when the computer cools down. Yet the back of the computer does feel not hot at all.

  I tried page of Chrome in Safari. Doesn't seem to help much.

  I am currently traveling to the Peru and did not my hard drive with my last backup, Time Machine, by hand, so as I understand it, I can't go back to a previous update.

  The Kernal task often seems to have a very high CPU %: 250 or.

  Right now, I'm trying to download the Combo, I read that this can sometimes fix glitches.

  Any help is greatly appreciated!

  The kernel uses excessive CPU cycles. Here are a few possible causes for the State. Some may not apply to you.

  FileVault

  Please, open the security and privacy pane in system preferences and click the FileVault tab. If there is an indication that the encryption or decryption is in progress, wait (possibly several hours) so he can finish and see if there is an improvement.

  Limitation of the

  When he does readings of high temperature in the material, or a MacBook battery low voltage readings, the kernel can try to compensate by interrupting the processor to slow them down and reduce energy consumption. This condition may be due to:

  ☞ an accumulation of dust on the logic board

  High ambient temperature ☞

  ☞ a defective battery or worn in a laptop

  ☞ the malfunction of a cooling fan, temperature probe, a probe or some other component voltage internal

  Note that if the problem is caused by a sensor, there can be no real overheating or undervoltage.

  If the computer is portable, try with and without the power adapter connected. If pigs kernel_task processor only on current alternative, load is causing the machine to heat up. This behavior may be normal for some models, but it can also be an indication of a hardware failure.

  Apple diagnostics or the Apple Hardware Test, although not very reliable, is sometimes able to detect a fault. For more in-depth material test, an appointment of 'Genius' to an Apple Store, or go to an other authorized service provider.

  If all goes well with the material, then everything that you can do to improve the cooling can help.

  Software installed

  The software installed by the user which includes a device driver or other kernel code can thrash of the kernel. This category includes virtualization, such as Parallels and VMware software, as well as products 'anti-virus' more commercial. Some system monitoring applications, like "iStat", may also contribute to the problem. You can test this possibility to completely disable or remove the software according to the instructions of the developer or start in safe mode. However, it should be noted that the deactivation of a modification of the system without removing or test in safe mode is not as easy as you think.

  Corrupt NVRAM or MSC data

  Sometimes, the problem is cleared up by resetting NVRAM memory or MSC.

  External display

  Connect an external display to some models of MacBook Pro while the lid is open can cause this problem. If necessary, use the external clamshell modescreen.

  Other devices

  Disconnect devices wired everything except those needed at startup and remove all the expansion cards of third parties (if your model.) If the problem is resolved, reconnecting devices one by one by one until you identify the culprit.

• Heat and a very slow Satellite A75-S211

  I read on a post above that the air vents on the laptops can become dusty, so I vacumed both on the computer of my girlfriend (who is the computer problem here).

  Fans were executed at the top almost constantly for some time. I managed to remove three large dust balls (had to pick them across the screens). This does wonders for the fan speed that seem normal now, and I guess that heat is better, even if I haven't used the computer much more before.

  I downloaded a utility that I learned on another forum and determined that the processor was working about 40 degrees C, 104 F. I think it's maximum recommended, but I'm not sure. My questions are this (assuming the heat problem is, essentially, cured):

  is there a reduced efficiency as the computer takes to guard against overheating of the processor (I'm sure there is) and should be turned "off" once the temperature problem is solved (particularly if the question was for a long time)?

  are there programs diagnosis out there that can tell me if the processor is damaged by heat or any other cause?

  Thank you

  L

  Hi Larry,

  Assuming you are using the Toshiba Power Management utility rather than the version of Microsoft then your laptop will usually follow a behavioral feature if the CPU is too hot.

  In general, as you have already discovered, fans will increase in speed and frequency until they work at top speed for most of the time (assuming that the power management utility is set for maximum performance). If the CPU is always too hot then the laptop is finally off himself in order to avoid any damage. However it is likely that the CPU you will get even hotter since turning off also stops the cooling fans.

  The Toshiba power management utility can also be set to change this behavior by slowing down the CPU in order to keep more expenses and thus reduce the noise caused by the cooling fans.

  After a reboot, the power management utility must return to its designated frame, which will be all you had set it initially.

  The thermal switch that controls the auto standby except in case of overheating of the CPU should have quite a high cost to ensure that the processor is not damaged.

  Kind regards

• Satellite Pro A100 carpet * dvd uj - 841 s write at very slow speed

  Hello.

  The carpet * a dvd multi drive uj - 841 s that came with my satellite pro a100 written on very slow DVD. Firmware 1.50
  I use good philips and kodak media (both rated 16 X).

  now, I know that the drive is only rated at 8 X max. But I can't even reach 6 X.

  A firmware update would solve this?

  Thank you very much.

  Hello

  To my knowledge, some burning applications control the burning speed to obtain the best possible results from burning
  As you probably n t know the speed of combustion higher risk of burn errors
  I burn my DVD only using a single 1 x speed.

  Then I can be sure that all DVD players would be able to play the burned DVD.

  Greetings

• My computer does not start, the alarm tone the aa from the hard drive, then back to the top and is very slow...

  My Pc does not start at times, especially first time in the morning, an alarm tone sounds, then it tries to start, Frost pattern on the screen... or black at all. then after pressing the new button could start up of normal, it will be very slow. Help, please

  Hi WolfgangKlinger,

  ·         Did you do changes on the computer before the show?

  ·         You're able to boot in safe mode?

  ·         You get the error message?

  Follow these methods.

  Method 1: Disconnect all external devices except the keyboard and mouse.

  Method 2: Start your computer in last known good configurations.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Applies to:

  • Microsoft Windows XP Home Edition
  • Microsoft Windows XP Professional

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Noise comes from the computer and is very slow

  I just got a new power supply because there was an amber light and installed after the computer is very slow and makes a grinding noise and the fan is ruining very hard.

  My pc is a Dell XPS 410
  Windows Vista SP2
  Here's the part
  1DJ301Kit, mouse, Universal Serial Bus, 2BTN, optical, Lead Free Black1DT240Card, graphics, 7300, weak encryption, MRMGA10, 22X8388Dual In-Line Memory Module, 512667M, 64 X 64, 8, 240, 2RX81HF730Display, flat screen, 20W2007WFP, black, Dell Americas Organization1KJ293Assembly, Panel, fill, floppy, TANK, Workstation1DY654Kit Precision drive, software, works 8.5, Office TRIAL, English1JF495Modem, V.92, Data Fax, SON2 internal, without lead, Dell Americas Organization1MY531Assembly, DVD +/-RW, 16, TSST SATA , READER Black1JX718HARD..., 250G, S2, 7.2 K, 3.5, WD-HAWK0149DFINFORMATION..., PREPARATION MATERIAL..., DEVIATION..., PRECISION WORKSTATION... INCREASE..., #21TH659PLACEMAT..., GETTING STARTED..., DIMENSION..., SYSTEM PERFORMANCE EXTREMES..., 4101YH251GUIDE..., OWNER..., DIMENSION..., PERFORMANCE EXTREMES SYSTEM..., 410, ENGLAND/ENGLISH... 1HU608Kit, software, Norton Internet Security, 2007, 15MTH, English1RH659Keyboard, 104, UNIVERSAL SERIAL bus..., UNITED STATES..., Black, DARFON ELECTRONICS, Corp.... 1JW762Kit, software, packaging, digital video disc VHP32 Drive English1UH837Kit, Speaker, 12V, AS501, Nmb Black001323INFORMATION...,..., CHASSIS NO ITEM1DH108ASSEMBLY......, DIMENSION 9200/410, PWA INTEGRATED... 1JX144Processor, 6300, 1.86, 2 M, Core Duo-conroe, Burn 21NJ131INSTRUCTION... L6 CHAS DEVIATE ON L5.51XP850Assembly, radiator, protective, MATRIX TANK DESKTOP...

  You probably have a hardware problem.

  grinding noise refer to metal on metal contract-fans, hard drive, everything that revolves.
  noisy fans mean generally the CPU is running too hot (for some reason any).
  If you know enough about the material to troubleshoot/fix the problem, Best Buy/s Geek Squad of free basic diagnostics, they will check it out and let you only know what they think is the most likely cause.

• WebHelp TOC does not display in Firefox and loads very slow in IE... advice?

  We have recently migrated to a webhelp online system so that we do not have to distribute documentation with our software.  We organize the webhelp documentation on our Web site and it's supposed to be accessible from our software.  Our problem is that the table of contents are loading very slowly in IE and does not at all seen Firefox.

  When I run the help locally (on our network or on my workstation), the table of contents works very well.

  During the last hour, I added the script to force the table of contents of synchronization (found on the site Web of Peter G)... and it did not help.

  Any advice on where to look?

  I can pm our URL for the help, if someone thinks it will help them to diagnose.

  Thank you!

  Jim

  (currently using Robohelp 8)

  No problem. Just load the page with the active Console tab. Then select the errors and you will not get the errors.

  Note: The table of contents are also very slow to load in Chrome. You have quite a few projects merged, so be sure that you set the correct speed optimization.

  The help of opening shows two errors in the Firebug console. I get a 404 on a missing file error: "" NetworkError: 404 not found - http://www.foodpro.com/help/release_2.4/webhelp/mergedProjects/FPUSRPRF/whxdata/whtoc.xml".

  The errors indicate that the merged projects 'checkfiles' and 'FPUSRPRF' are missing. I suspect that FF choke on the missing mergedProjects/FPUSRPRF/whxdata/whtoc.xml. Still, execution stops after that.

  But perhaps a merged help guru can tell you more.

  Take a bow

  Willam

• Speed of the satellite - 12L - C850D slow WLAN and LAN

  Help please

  I C850D - 12L running Windows 8.1 and as far as I know, have all drivers up to date according to PC world.

  I am not receiving the correct speeds both hard and connectivity wireless. Should get 30 + bottom and 10 upward but getting 10 down and 5 up.

  I did the usual stuff of BT and they are on the case - they say that my hub receives correct speeds and suggests that it is my drivers?

  Another laptop received very good speed of my hub. HUB is the latest issue of BT

  Happy new year

  > I did used * BT stuff * and they are on the case - they say that my hub receives correct speeds and suggest it's my drivers?

  I m really confused. You're talking about BT (I guess you mean Bluetooth), but this Toshiba laptop can't stand NOT BT's
  The device is equipped with a Realtek RTL8188CE WLan card 802.11b/g/n and with LAN Fast Ethernet 10BASE-T/100BASE-TX card.

  But he can't stand BT

  So could you please provide more details or could you clarify this misunderstanding

• Safari crashes constantly and is very slow

  Hello

  I have a problem with safari, it blocks constantly when I try to open the pages such as apple.com.

  Google.com works, but is very slow.

  I already deleted the internet plugins folder in both libraries.

  On another user, everything works fine.

  Process:	com.apple.WebKit.WebContent [485]
  Path:	/System/library/StagedFrameworks/Safari/WebKit.Framework/versions/A/XPCServices/ com.apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent
  Identifier:	com.apple.WebKit.WebContent
  Version:	10601 (10601.5.17.4)
  Update information:	WebKit2-7601005017004000 ~ 2
  Code type:	X 86-64 (native)
  Parent process:	??? [1]
  Responsible:	Safari [458]
  ID of the user:	70 s

  Date/time:	10:34:04.353 2016-03-31 + 0200
  OS version:	Mac OS X 10.10.5 (14F1713)
  Report Version:	11
  Anonymous UUID:	658BA7B7-7D19-D573-EFB2-B4F100922778

  Time since started awake: 520 seconds

  Discussion crashed:

  0 dispatch queue: com.apple.main - wire

  Exception type:	EXC_BREAKPOINT (SIGTRAP)
  Exception codes:	0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  CFRetain() called with NULL *.

  Class controller Bundle:

  BrowserBundleController

  Process model:

  Several Web process

  Safari 9

  Safari/Preferences/Advanced - activate the menu to develop it, then go ahead and empty Caches. Quit/relaunch Safari and test. Then try Safari/history/Show History and remove all items from the history.  Quit/relaunch Safari and test. You can also try try Safari/Clear History... The downside is that it deletes all cookies. It could upset some sites no longer recognizes your computer as one that has visited the web site. Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select Library./Caches/com.apple.Safari/Caches.db, and then move it to the trash.

  Go to Safari preferences/Extensions and disable all extensions. Test. If correct, enable the extensions one by one until find you which extension is causing the problem.

  Corruption Safari       See post by Linc Davis

  Safari 8

  Safari/Preferences/Advanced - activate the menu to develop it, then go ahead and empty Caches. Quit/relaunch Safari and test. Then try Safari/history/Show History and remove all items from the history.  Quit/relaunch Safari and test. You can also try try Safari/Clear History and Web Site data. The downside is that it deletes all cookies. It could upset some sites no longer recognizes your computer as one that has visited the web site. Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select Library./Caches/com.apple.Safari/Caches.db, and then move it to the trash.

  Go to Safari preferences/Extensions and disable all extensions. Test. If correct, enable the extensions one by one until find you which extension is causing the problem.

  Corruption Safari       See post by Linc Davis

• I downloaded 8.1 on my iPad a few months ago and it has become very slow especially in the e-mail program and glitch

  I have an iPad mini version 9.02. a few months ago, I downloaded the latest operating system from Apple 8.1 and my iPad became very slow and glitchy especially in the e-mail software... What can I do?  Now it asks me to upgrade to iOS 9.1 and I fear that it will be even worse.

  Sorry - but what do you mean you have an iPad Mini version 9.02? What are your reference when citing 9.02?

  At this point, your best bet is to keep the device up to date. The latest version of iOS is 9.2. It's what you could be upgraded to.

  See you soon,.

  GB

• Windows 7 RC 7100 - Chrome and IE8 very slow browsing

  I just downloaded Win 7 RC 7100 - navigation is very slow on IE8 and Chrome.   Any ideas?   I hv checked the NETWORK card settings, run TCP optimizer based on CSSTidy but not luck...

  Any advice will be appreciated.

  Thanks

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Above is the link to the Windows 7 Forums.

  This is the right place to ask questions of Windows 7.

  Here is the Vista Forums.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.InternetExplorer.General&cat=en_us_28cca3eb-7037-4D4F-bde1-d8efee1f1420&lang=en&CR=us

  And a link for the Internet Explorer newsgroup.

  See you soon. Mick Murphy - Microsoft partner

• Devices and printers very slow to load, Windows 7, computer laptop amd

  We have problems of speed with speed, seems to slow down.  Yesterday wanted to add a new printer, open Printers and drivers and he would not completely charge, the green progress bar gets to x, but he'll only half in the x.

  Try this link and see if it helps.

  http://support.Microsoft.com/mats/slow_windows_performance/en-us

  Good luck.