Front speaker

Similar Questions

• Output of the front speaker left is almost a whisper

  Hello

  I had a Pavilion m9300t for over 3 years and I have always used a set of two simple speakers, attached to the headphone output on the front panels until recently when it is installed a system of 5.1 rear speakers using 3 ports on the Panel to find that the release of the "out front" seems to be the reason for all my troubles. I tried to go around the speakers and even checked the speakers on a machine and all seems to work well. "So I thought that all output ports provide stereo output, except the lime' out front speaker" on the rear panel. I have checked the drivers and all settings in Realtek HD Audio Manager and ran the tests of speaker and even used disseminators of media, but the front speaker will provide only a weak sound. Does this mean that his is a hardware problem and if she makes a bad port what are my options?

  Thank you

  MODI

  Hi Modi,

  Is the speaker that branch to the green port 'active '? I mean,'s done it this speaker has its own power supply plug or is connected to other stakeholders who have their own energy source? The green port on the PC is not "powered" so it only will provide a weak signal and expect the speakers to control the overall volume.

  Something else to try, if you unplug all the other actors and simply plug the speakers into the green port, is the change in sound level? Alternatively, if you connect the headphones to the green port, you get audio normal?

  This will help you determine whether or not the hardware works.

  Another thing to try if you don't have it already: when you updated the audio driver, do you have the driver directly from Realtek, or did you use the HP driver? If you haven't tried the latest driver from Realtek, you can do it. Here is a link to download Realtek: http://www.realtek.com.tw/downloads/

  Just select "High Definition Audio Codecs", accept the agreement and then download and install the driver for your operating system.

  I hope this helps. Let us know how it goes.

• Connecting the speakers front and motherboard MXP

  On Monday, March 21, I collected my mobie from service after the replacement of mothervoard Center and now both my SIM slots work. At sea I got 6.0.1 update that I've updated quickly. But since the update my melodious sound of the front speaker disappeared. Its cracking and the sound is now similar to some low-quality speakers.

  When I went to the DEPOT, he was about to be closed and some other preparations of new furniture service center was present. The environment is dusty. This could be the reason behind the issue of quality of speaker?

  Is the replacement of the motherboard, nothing to do with the sound, or something is wrong with the 6.0.1. Anyone faced with this its problem of quality after the 6.0.1 update?

  
  

• Addition of Logitec X 540 for Acer Z3731 speaker system?

  Recently, I moved my all-in-one to a better location of the room and exchanged external speakers previously installed on an old desktop Acer running Vista.  In the process, I lost control of his driver and were unable to reinsall and reconfigure correctly.  The problem seems to be the characteristics of the internal speaker system and the driver stack which detects "characteristics.  I can't get the hardware to install and control the speakers sound Logitec 5.1 surround plugged into the rear panel as a system of "surround sound."  I can't keep the pilots to recognize initially built in audio which is only capable of stereo output high definition.  As a result, the external speakers that provide side Centre and wofer via a supplied matrix decoder control unit end stereo playback.  They worked fine with my old AcrePower-FH desktop running Vista.

  Any suggestions on how to proceed under Windows 7 (64 bit)?

  I ended up buying a subscription program manager drivers that provides recommendations for driver updates and uses heuristics to adopt its recommendations.  Do not trust it to Acer Aspire Z3731.  He recommended an incorrect driver for video on my computer.  It isn't that I had installed and started having major problems with MSIE 10 on the homepage of Comcast that I returned and found the driver for the Intel video chipset that is actually installed.  When I updated to this driver the next Microsoft Update I ran came with an optional update for Win64 with finally corrected graphic problems, but...

  It doesn't seem to be a way to get Windows 64 to install and display two other speakers or automatically override the defaults that the RealTech Acer driver is recommended for my box seems to be 'frozen' in.  The appearance of the user interface on the Realtech Audio Manager software installed, it is supposed to be able to detect the existence of more than one pair of speakers and adjust the injector appropriate as a default value.  Unfortunately, when I plug the X 540 he does not spend them and instead to show three son plugged into the rear panel, it shows four. I think that the fourth wire represents the internal speaker attached to the bus, which is a virtual place inside the computer.  What I have to open the case and disconnect the front speaker bar for this problem?  If if it sucks since Acer had rejected me requests to provide a case diagram or disassembly of instructions that would help me make sure that I'm not going to break anything trying to open the case.

  Someone answer please?  Apparently Acer Genius never faced this problem when they set up the software.  The package provided with this computer has now received 228 updates from Microsoft since I turned it on.  The 64-bit Microsoft Internet Explorer 9 instance that comes with it was so buggy that I ended up using Firefox to register with Microsoft so I can get automatic updates!  I'm really a fan of Acer, I own three of their computers, but this problem seems to be specific Acer.  I had the 540's X on an old Vista based desktop Acerpower FH and the driver bundled with it recognized them very well, but there was no internal speaker system.

  Finally! a partial solution to my symptoms... With the X of Logitec 540's hip, 'Matrix' button put out SERVICE and its 7.1 surround selected, I was able to get both the two "outside" speakers to operate under the name "back" involved so that the two exploited inside speakers as left and right and Center and the woofer to play simultaneously.  I had to have the driver set as "disabled" when I plugged the three sons of the 540 X and use the wizard to "solve the problems of sound" to get recognized records.  A good part of my funbling came about from can't understand what 'Matrix' on the X 540 controls mean.  It is intended to sound source that is only made in stereo, for example an MP3 player created by scanning of a stereo recording of the 1960s.  In my tests, I've often had this option and he effectively lost all but the left and right speakers in the X 540 system.

  I'm still not able to easily switch my Windows 7 X 64 system to use the system of external speakers with the sound bar and back via the software.  I think that this feature is / should be available for all-in-one devices.  No explanation?

• Classic classic speaker Blackberry blackBerry stopped working suddenly

  Hi, I use Classic BB bought two months ago. everything works fine until I had the problem with the speakers. Here's what happened.

  1. I use headset and listen to the music during my last vol. removed the plug headphones while music that I have to get off the flight.

  2 home, dropped the phone in my office. It is the Prosecutor's office. but no damage or scratches on the phone.

  3. went to blutooth working, used to transfer music between computer and classic BB

  4. try to play and cannot hear any sound, but if I play audio in combined mode, i can hear music from front speaker top which is usually used to hear incoming phone calls - located beside the front camera on the section of the front upper.

  After playing for two days, finally decided to wipe the device but no luck.

  No alarm goes off, no sound incoming phone call, no sound during playback of videos. However my headphone works very well.

  I read a lot of articles do not know what the problem is.

  Any help would be great.

  Thank you.

  Sdgardne, finally managed to solve the problem. Apparently something to do with BBM calls voice and hands free kit. In fact, I used headphones Bose which is not standard BB. That's how it was resolved.

  After having had a problem, removed from the device and tested without luck, after a while, I received a call from my BBM contacts BBM voice telephony and surprisingly phone began to ring normally. From here all of the phone calls of income using the regular cellular network starts ringing normally, other applications like WhatsApp... etc working / rings as usual.

  Strange, but that is very well that I'm glad at the end.

  Thank you.

• iPhone 7 vibrating during audio playback

  Hello

  my iphone Black 7, that 128 GB on the last iOS 10.0.1 vibrates a lot when I play audio (music, videos, YouTube etc), it is so annoying because it vibrates on the screen and on the back and the operation of the touch screen or simply hold it's unpleasant. If I reduce the volume to 2 or 3 white dots, the problem will fade and become barely noticeable. And I don't mean high sound volumes (4-5 points is enough to be obvious).

  is it something normal that happens to everyone because of the new front speaker?

  Or is it for lack of an assembly?

  Thank you

  I have it on mine, same model as yours.

• Audio level keeps falling

  Windows XP Home Edition,

  My noise constantly falls to zero. With the open Volume control, any attempt to increase the volume of the front speaker causes the bar to fall back down to zero. All my audio drivers are up to date, and it does not work if I change my Audio options between the sound card and the on-board sound. An interesting thing is, if I have two edge and card volume panels open, the not selected in my options, I can adjust the volume. As soon as I change the options to the other, the bar on this panel immediately falls and material unused is now configurable for the volume. Anyone knows what is the cause?

  After a few minutes, found this link in another http://support.microsoft.com/default.aspx/gp/no_sound?entrypoint=WHHT&p=1 that fixed problem answer.

• Win7: no audio to the speakers, Yes in the headphones; Ubuntu: both work

  Hi all

  My system is Windows 7 Pro 64 bit on a computer laptop lenovo. I was running Win7 since the beta public, never had any problems with the audio drivers. Can't remember when this happened, but at some point given, I lost the sound in my laptop speakers. Since the headphone output works, I assumed that some cables went loose. Also, sometimes I can actually get the sound through the speakers carefully placing my headset connector to halfway in. Well, in any case, I thought it was a hardware problem, until I installed Ubuntu on the side (dual boot) and everything works fine there. I reinstalled my Windows drivers, and later the whole windows, but nothing has changed. Pilots report no problems, in fact, the volume bar bouncing happily when I try to play music. Would be nice if I could hear it as well...

  Thank you very much

  BTW, any device audio sysinfo:

  Name High Definition Audio Device

  Manufacturer Microsoft

  Status OK

  ID of device PNP HDAUDIO\FUNC_01 & VEN_10EC & DEV_0862 & SUBSYS_17AA3867 & REV_1000\4 & 191C704F & 0 & 0001

  Driver c:\windows\system32\drivers\hdaudio.sys (6.1.7600.16385, 342,00 KB (350 208 bytes), 14/07/2009-01:07)

  I don't know if this will help, but it's something I noticed when the Win7 RC is out. I found that the provided Windows audio driver that has been installed automatically by Win7 worked, but she changed the apparent wiring to all the output on the computer Sockets. IOW, things like the front speaker decision-making being the center being the sides, that sort of thing and the rear speakers. When I installed Win7 audio drivers provided by the manufacturer of the chipset audio instead, all outputs then returns to normal.

  You should have a list for the real sound chips in your device manager on your computer (the HDAC device above is a default MS driver installed in addition to the device driver named) at your system specs must appoint the audio device. Download the drivers from the manufacturer of the device (not necessarily the computer) and install those.

  Are other situations that mimic your question a bit if some multi-channel codec or filter is not properly downmixing 2 channel (applies only to multi-channel audio sources) or if the windows default sound sends audio signals to the SPDIF (digital) output for some reason any. For example, filter FFDSHOW or AC3, or some AAC codecs can have individual settings to redirect audio between speakers or SPDIF or to its multichannel downmix to 2 channels (for headphones or stereo speakers). You'll have to search options to find the wayward setting.

• I have a problem with the sound to be heard through speakers and headphones.

  Original title: Ok, this is really annoying - need help (Audio)

  OK, so I have a motherboard Asrock z77 Pro 3 that supports the audio 7.1.
  But I have a stereo speaker 2.1 only. So I plugged in any case and began to use - the bizzare thing, is when I connect headphones through the headphone jack on the front, the sound is produced by headphones and speakers. I need to stop this.

  Is it OK to connect a 2.1 to 7.1 channel speakers? (by any channel 1 output).

  Realtek drivers installed.

  When you are using speakers stereo use decision-making (lime green) front speaker.

  Many cable front have two different connectors to connect to the motherboard.
  A (HD Audio if I remember correctly) allows to disable the outputs back when you connect the headphones to the output on the front panel.

  When you use the right connector you should see the option switch when you
  connect or disconnect the headset if you have Panel-Sound-open reading.
  Speakers should be 'default' when the headphones are not connected and when the reverse
  You then connect.

  .

• What is the interface on my Alienware Laptop, M17xR3?

  I want to buy and install Crucial MX200 SSD m2.

  And I found 1 port resembles m2 located under the keyboard near the ram slots.

  Please help me identify this crack in the picture.

  There 'Jetty' sign.

  

  

  Hi, Sehri, the laptop in this photo looks like a M17xR3 or M17xR4.

  If so the slot if you watch is a feature that allows for WiDi - to your to transmit Wireless HD video from your laptop to a monitor active WiDi or a TV.

  I found a glaring issue in the official Dell Alienware owners manual for M17xR4 model, there is no mention of a player mSATA or housing unit, which is a little funny that I sold at least 100 units of this model, all with cache mSATA startup disks

  You do not have a location for a disc mSATA hard, BUT ONLY in THE MODEL of M17xR4, that is there is positioned under the palmrest to halfway between the bottom of the keyboard and front speaker/light grill, the LCD screen and the palm rest must be removed for access to the installation.

  M2 technology was not around when the M17xR4 was not so sure, weather, you will get a standard mSATA performance gain to M.2 mSATA, just be sure to get one that has the correct interface issues pins

  M.2 mSATA (unsuitable) - http://www.ebay.com.au/itm/Samsung-850-EVO-250GB-M-2-Solid-State-Drive-/111647286503?pt=LH_DefaultDomain_77&hash=item19feb264e7

  M.2 mSATA (adapted) - http://www.ebay.com.au/itm/SSD-256GB-Plextor-M-2-SATA-2280-PX-256M6G-retail-SSD-PX-256M6G-2280-/121679676606?pt=LH_DefaultDomain_101&hash=item1c54ac84be

  This also applies to the Alienware

• How to connect speakers to the receiver?

  I just bought an audio receiver to Sony (model STR-DH810) to replace my old Sony receiver. I am trying to hook the speakers using same speaker cable I had on my old receiver and speakers.

  My old receiver had simple connectors: press the button/flip, insert the wire and release. This new receiver has "dial" I am unable to get the cables to connect the connectors. Y at - there a trick to this? Son of Center speaker appear to be too thin and front speaker wires are too thick. Help, please!

  Looking at a picture of the rear panel of your STR-DH810, all connections of the speakers have the possibility to insert the banana plug, instead of using the older spring connectors. With banana plugs, you never have a question of short-circuiting of the speaker with the bare wire through, and they are great for insertion and removal, especially if you have sets of speakers you can interchange Front A or B at high Front. You can wrap the bare wire around the base of the plug banana on the back panel of the receiver, but it is infinitely easier to use sheets bananas. You need a pair of bananas for each speaker cards - a pair of Red-Black, for the more and less speaker wires to each speaker. They are packaged and sold in pairs as a red-black pair per package.

  I recommend the open all-metal type screws Monoprice over any closed screw or weld type as in the link below. They are a snap to install on your speaker wires, and then just insert them in making banana on the receiver. Screw type banana plugs are completely reusable with just a screwdriver. To $1.76 per pair, they are half the price of the cheapest pairs of plastic/metal banana plugs available locally from places like Radio Shack.

  http://www.MonoPrice.com/products/Produ... 1 & format = 2

• Why is there still no update to solve problems of Siri and speaker on the iPhone 5?

  II have had problems using the speaker, Siri and sound both front and rear video. What I mean by problems is "they don't work" at all. I tried all the options I can think and especially the ive people read on the web. So is this a problem that I am having with my iPhone 5 or all the world is else having the same problems?

  Thanks Dave

  Looks like it would be just you. If your device behaves erratically these steps generally will allow, as long as it is not a hardware failure. They assume that all the content you want on the device in your lending library for the restoration. If not see recover your iTunes from your iPod or an iOS device first. I would also recommend you copy everything off of the camera, if you have not already.

  1. Backup device.
  2. Restoration as a new device.
  3. Restore the backup that you made earlier.

  It would be interesting to test the behavior that you are concerned after step 2.

  I had to do earlier when Siri has ceased to be able to call one of my contacts or play my music.

  TT2

• Front to the Microphone does not work after last update 9.3.2

  My Siri worked around 26/05/2016 and I updated Memorial weekend. Since that time my front microphone has stopped working. FaceTime, dictated, Siri, voicememos are all just static sounds. But if I plug my headphones, it works very well. I tried something that does not promote Apple, but it was hopeless. I did all the trouble shooting and now awaits a chat representative to help me. This will be my second handset with Apple for the year and 1/2. My first iPhone 6 +, the screen no longer responds and they replaced the whole! Now, it's ridiculous!

  Any help, please! How can I get my FRONT facing speaker WORKS?

  iPhone 6 Plus

  iOS 9.3.1

  64GB

  I'm not sure what you have tried, but the simplest and the first line of defense in these matters is a reboot or a forced reboot:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Aside from that, it COULD still be a hardware problem.  iOS updates can highlight potential problems/mismatches firmware in this mode. What is a refurbished phone?

• Phone 6 more low speaker volume

  Hello!

  I can barely hear an opponent during phone calls. (No speaker, but as before, close to the front camera).

  I have to move to the speaker every time.

  Yes, the volume of durin, a call is @ maximum. (See screenshot).

  Maybe it are other software wanted to say that the lower volume that I'm not aware of? I don't want to think that this is a prob. material... = (())

  

  Just to cover all the bases... you take off the film on the front of the phone, did you? It covers the helmet speaker.

• HP m7160n the front audio jack problem

  I am running Vista Home on my PC Media Center m7160n.  I used to be able to plug my headphones into the front audio jack and it would reduce the rear speaker output.  Now it doesn't!  I entered the sound properties and is set to turn off the rear socket, when the system detects a card into the front socket.  The helmet still works, but I need the speakers off when using the headset.  I hope this is enough information.

  Hi MrBassMan26,

  It's weird and looks like the jack-detect is not working properly. This problem just started happening? It happened after installing anything, even a Windows Update?

  If it just started happening, you can try to perform a restore of windows to an earlier point when it was operating normally. Or you could try to re - install the driver audio or even install a updated audio driver. Who should take care of it, and if not you may need to make some configuration changes in one of the sound properties (Windows or Realtek).

  I see that you have Vista, you accidentally upgraded to Vista XP?

  Try to install audio driver for Vista from Realtek: http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & GetDown = false

  Let us know how it goes.