frozen computer and now it is black screen after Windows Update

Similar Questions

• Aspire R7 572 G having a black screen after windows update 8.1. What should I do

  Hi all

  IM wondering, anyone having this problem before, Im of the problems with this black screen after startup, it happened yesterday I think microsoft needs to have updated some drivers rendering my black screen after startup. Initially, I thought it was my SSD, but it turns out that I can't get into Safe Mode.

  I read more info on this problem related to the other PC and try the preferred method of 'disabling' drivers Intel GMA HD. It worked, however, this means that the main driver is now reduced to a graphics card video standard with vram limited.

  I tried to roll back and even redownloading and reinstalling the intel driver in version VGA_Intel_9.18.10.3215. The blackscreen after boot have yet taken place. I missed something?

  This is an old version of Intel drivers.

  Try this, after uninstalling the old pilot Intel:

  http://global-download.Acer.com/GDFiles/driver/VGA/VGA_Intel_10.18.10.3316_W81x64_A.zip?acerid=63519...

• Satellite C55-B5101 - black screen after Windows update

  Mobile received Christmas day (all new) Satellite C55-B5101, saves Windows update (formerly 8.1) by getting only now black screen... Not very in computers so if you know what please he dumb down for me! Thank you

  Hello.
  I'll post a similar problem with mine. Here is something I've read elsewhere that can solve yours.

  Unplug the cable from the main charger.
  Remove the battery if possible.
  Press and hold the power button for 1 minute.
  Leave battery and connect the cable.
  Turn on.

• Black screen after Windows Update 8.1 in Dell Inspiron 15R 5537

  Hi guys,.

  Hello, I have updated my Dell Inspiron 15R laptop 5537 Windows 8 Pro to Windows Pro 8.1 by using the Application Store.

  After a wait of nearly 6 hours, update has been made and after the installation of Windows, display was black, cursor blinking... I checked in the Microsoft Web site, and I found that not only me and a lot of Dell customers are facing the same question. I luckily managed to start in safe mode and I uninstalled both of my video drivers and I'm back to my windows 8.1. After that I updated my video drivers as shown in the link below, always my screen turns off. If I had no other choice than the reset my pc to windows 8 pro.

  Driver video link: http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/inspiron-15r-5537?driverId=PWTRP&osCode=W864&fileId=3287401962&languageCode=en&categoryId=VI

  When I was checking for the latest version of the driver for Intel Graphics & AMD Radeon that supports windows 8.1, I am able to find a driver on the dell Web site.

  http://www.Dell.com/support/drivers/SG/en/sgdhs1/DriverDetails/product/Inspiron-17R-5737?driverId=6GGGM why it is not being updated in the list of corresponding product drivers... In fact I think that it is the fix. I'm not sure.

  If one has updated and I need technical support dell for this

  Hi guys,.

  After much research, I understand that is the problem because of the Intel video driver. There is a beta Intel video driver package that supports Windows 8.1. Try this update package and display your results. As I've already restored to windows 8. It will take at least 4 to 6 hours to update me the State. The link below is for Dell Inspiron 15R 5537 model.

  http://FTP.Dell.com/published/pages/Inspiron-15R-5537.html and install Intel HD Graphics Driver ver 10.18.10.3308 4400. You must follow the link because this driver is not yet downloaded in Dell drivers & downloads (referred in Dell Post)

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Satellite L500 - system hung on the splash screen after Windows update

  Hello

  I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

  Thank you
  Denise

  Hello

  > hung on the blue startup screen after it has restarted after a windows update
  This means that you get a blue screen after Windows update and more, you can start Windows t?

  You can start Windows in safe mode?

• I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday.

  Hello
  I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.

  Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.

  Any guidance will be appreciated. Thnx Nick

  Hello

  If you meet this new,
  http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• I bought a used computer, and now it says my copy of windows is not valid. Is it possible to make it valid?

  I bought a used computer, and now it says my windows are not valid. Is there anyway to find the product key for my windows program? Or make my windows valid without spending money? I'm a musician who was struggling.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

  System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

  Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

  Hard reset has been tried 3 times with no improvement.

  External monitor is connected but no signal has been out of the laptop, screen is black.

  Done a few times this page to reset the BIOS setting blindly:

  http://support.HP.com/us-en/document/c02217843

  BEEPS heard when you press F10 or F5 during procedures. But still black screen.

  What can I try again?  Please advice kindly!

  Hi @ sokw,

  I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Start on black screen after installing updates

  is please help because it is very annoying because I have to always use my vista recovery disk, then click on repair your computer to get my computer restart.

  * Title *.
  After that I'm going to restart my computer to apply updates my computer past the start screen and does not display the vista logo and stays on a black screen.

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• G62 b90 - ev: black screen after Windows loading

  Hello everyone, as you can see by the title I get black screen after loading of Windows at the same time as everything else works (hard drive of fans lights and sounds). I've tried several things, I read on troubleshooting thread, memory, diagnosis, diagnosis of hard drive, delete and change put the Rams, disconnect the battery and ac and keep the power button for 30secs hurry the ac without the battery but nothing. I also tried to use a monitor with hdmi cable but I get a blue screen when I try with the monitor. Also what happens during a format so I can't even through safe mode. IM really waiting for your answers and in the hope of a solution. Thanks in advance!

  Just because you use the key F11 to restore to factory does not mean that the recovery partition itself is not altered.

  Suggest you try instead the recovery discs or take it to the shop for advanced diagnostics.

• Brother printer and the scanner does not work after Windows Update.

  Separated from this thread.

  I have the same problem with my Brother ADS2000 scanner and my multi MFCJ4710.  I can print with the MFC, but the Control Center detects or scanners.  They worked and suddenly stopped.  I wonder if Windows update changed something?  Scanners both work with Windows Fax and Scan, but not Brother Control Center 4.  I called support of brother and again, they have said something about TWAIN and I have to do some registry clean.  I tried their manual steps, they sent with the registry fixes and which totally screwed up on my computer.  I had to do a restore and now back to square one.

  Any solution out there?

  It was my dose,

  (1) start search box type menu "user accounts".

  (2) open and select "user account control settings."

  (3) to change the cursor to "never notify".

  (4) 'ok' to save

  (5) fact! You may need to restart you machine.

  PS: this was my fix, it was caused by software AVG anti-virus, AVG has replaced this setting and would fail to wireless for my scanner. It will be useful.

  Rob

• iPhone ran out of battery, now wont start black screen after the apple logo

  Hey not last night, but the night before, I forgot to plug my phone so it died while I was sleeping. When I woke up, I plugged and went a little. When I came back I noticed that the phones screen was on, but black. I tried to restart with the buttons and everything that I do not understand what could be wrong. The battery is not cause fried, it continues to display the apple logo then a black screen. I would prefer not to have my phone back and to lose everything, and I can't really afford to pay someone more than 200 to tell my my phone is broken, please help.

  Have you tried that?

  Try a forced reboot. No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.