Frozen/lag sandisk

Similar Questions

• start to slow down, slow down everything and my lag total Tower (post etreCheck)

  This has been a problem for some time. I did audits of malware and that doesn't seem to be the problem.

  I have a marked difference in performance when the macbook is on the table against my knees, I do runsmcFanControl but I know that's not an overheating problem.

  I have a mid-2012 15-inch macbook pro running El Capitan 10.11.5

  I have only 4 GB of memory.

  Here's my etreCheck, there seems to be a lot of problems, but I don't know where to go from here:

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-03 21:35:01

  Download EtreCheck from https://etrecheck.com

  Duration 16:55

  Performance: Poor

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Computer is too slow

  Description:

  Super lag on startup and basic operation

  Hardware Information: ⓘ

  MacBook Pro (15-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 1

  1 2.3 GHz Intel Core i7 CPU: 4 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 59

  Video information: ⓘ

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M - VRAM: 512 MB

  Color LCD 1440 x 900

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since the start time: 8 days

  Disc information: ⓘ

  HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HD hand (disc 1) /: 498,88 (Go 140,93 free)

  Storage of carrots: disk0s2 499.25 GB Online

  HL-DT-ST DVD - RW GS31N)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. IPhone.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  ~/Library/LaunchAgents/.dat0573.001 (hidden)

  / System/Library/Frameworks/addressbook. Framework/Resources/AddressBookSourceSyn cScheduleHelper - scheduleSync 8E3A7CB5-2D52-42B7-A2D4-D3FEF9BCA40E

  A unknown file found. [Check files]

  Kernel extensions: ⓘ

  / Library/Extensions

  [loading] com.globaldelight.driver.BoomDevice (1.4 - SDK 10.10 - 2016-06-03) [Support]

  / System/Library/Extensions

  com [no charge]. Cycling74.driver.Soundflower (1.6.6 - 10.6 SDK - 2016-06-03) [Support]

  com [no charge]. Ralink.driver.RT73 (1.1.4.0 - 2016-06-03) [Support]

  com.Cisco.NKE.IPSec [no charge] (2.0.1 - 2016-06-03) [Support]

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 147 tasks Apple

  [operation] 67 tasks Apple

  [killed] 16 tasks Apple

  16 killed processes lack of RAM

  Launch system demons: ⓘ

  [loaded] 44 tasks Apple

  [loading] 148 tasks Apple

  [operation] 83 tasks Apple

  [killed] 15 tasks Apple

  15 killed process lack of RAM

  Launch officers: ⓘ

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-11) [Support]

  [operation] com.google.keystone.agent.plist (2016-03-01) [Support]

  [operation] com.robohippo.HippoConnectAgent.plist (2014-02-13) [Support]

  Launch demons: ⓘ

  [operation] com.adobe.ARMDC.Communicator.plist (2016-05-11) [Support]

  [operation] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-11) [Support]

  [failure] com.adobe.fpsaud.plist (2016-05-09) [Support]

  [operation] com.google.keystone.daemon.plist (2016-03-01) [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist (2015-12-13) [Support]

  com.robohippo.HippoConnectDaemon.plist [no charge] (2014-02-13) [Support]

  User launch officers: ⓘ

  [not responsible]. (hidden) dat0573.001 (2013-07-23) [Support]

  / System/Library/Frameworks/addressbook. Framework/Resources/AddressBookSourceSyn cScheduleHelper - scheduleSync 8E3A7CB5-2D52-42B7-A2D4-D3FEF9BCA40E

  [failure] com.adobe.ARM. [...]. plist (2014-09-03) [Support]

  [loading] com.adobe.ARM. [...]. plist (2014-01-19) [Support]

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist (2015-10-05) [Support]

  Items in user login: ⓘ

  smcFanControl Application (~ / Desktop/smcFanControl.app)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  E-mail application (/ Applications/Mail.app)

  MediaFire Desktop Application (/ Applications/MediaFire Desktop.app)

  Other applications: ⓘ

  [ongoing] com.eidac.smcFanControl2.88672

  [ongoing] com.globaldelight.BoomDaemon

  [loading] com.mint.quickview - Launcher

  [ongoing] com.Mint.Quickview.42912

  [loading] 394 tasks Apple

  [operation] 218 tasks Apple

  [killed] 32 tasks Apple

  Plug-ins Internet: ⓘ

  AdobePDFViewerNPAPI: 15.016.20045 - SDK 10.11 (2016-06-03) [Support]

  Flash Player: 21.0.0.242 - SDK 10.6 (2016-05-12) [Support]

  JavaAppletPlugin: 15.0.1 - 10.11 (2013-11-01) check the version of the SDK

  AdobePDFViewer: 15.016.20045 - SDK 10.11 (2016-06-03) [Support]

  Center photo Plugin: unknown (2013-11-10)

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-19)

  QuickTime Plugin: 7.7.3 (2016-05-16)

  FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-05-12) [Support]

  NP_2020Player_IKEA: Unknown (2013-11-10)

  DivXBrowserPlugin: Unknown (2013-11-10)

  RhapsodyPlayerEngine: Unknown (2013-11-10)

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-02-09) [Support]

  Default browser: 601 - SDK 10.11 (2016-05-16)

  Flip4Mac WMV Plugin: Unknown (2013-11-10)

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-19) [Support]

  NPDjVu: Unknown (2013-11-10)

  SlingPlayer: Unknown (2012-04-22) [Support]

  ContentUploaderPlugin: Unknown (2013-11-10)

  OfficeLiveBrowserPlugin: 12.3.6 (2013-03-13) [Support]

  User Plug-ins internet: ⓘ

  CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-25) [Support]

  Audio Plug-ins: ⓘ

  DVCPROHDAudio: Unknown (2013-11-10)

  3rd party preference panes: ⓘ

  BDSPrefPane (2005-05-17) [Support]

  Flash Player (2016-05-09) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Primary HD: disc size: 498,88 GB disc used: 357,95 GB

  Destinations:

  Time Machine [Local] backups

  Total size: 999,86 GB

  Total number of backups: 11

  An older backup: 03/03/13, 21:21

  Last backup: 06/12/15, 19:57

  Backup disk size: too small

  Backup size GB 999,86 < (disc 357,95 GB X 3)

  Top of page process CPU: ⓘ

  4% coreaudiod

  com.apple.WebKit.WebContent (21) 2%

  com.apple.MediaLibraryService (2) 2%

  kernel_task 2%

  1% boom

  Top of page process of memory: ⓘ

  736 MB kernel_task

  Com.apple.WebKit.WebContent (21) 664 MB

  Safari of 238 MB

  Mdworker (10) 102 MB

  Com.apple.MediaLibraryService (2) 61 MB

  Virtual memory information: ⓘ

  70 MB of free RAM

  3.92 GB used RAM (461 MB Cache)

  1.15 Go Swap used

  Diagnostic information: ⓘ

  3 June 2016, 16:28:52 ~/Library/Logs/DiagnosticReports/findNames_2016-06-03-162852_[redacted].crash

  /System/library/services/AppleSpell.service/Contents/MacOS/findNames

  2 June 2016, 21:27:35 ~/Library/Logs/DiagnosticReports/G2MUpdate_2016-06-02-212735_[redacted].crash

  / Users/USER/Library/Application Support/CitrixOnline / * / G2MUpdate

  Oh, I also have this problem with wake sleep where the computer won't let me open a session and then darkens so I have to reactivate the screen with the power button and it is still frozen and have to do this several times, and after a few minutes, I'm finally able to type something in the connection box.

• Frozen on Lenovo Yoga 3 1470 CPU multiplier

  Hello

  Yestarday I was using my laptop with several open applications and video 1 outputs call active.

  Well, the CPU has decided to freeze to 0.5 GHz due to the heat produced. Of course, the laptop became unusable, so I closed and restarted the system. Once the reboot is finished, I noticed that the frequency was still at 0.5 GHz. So I ran a Ubuntu live usb, and I checked the CPU: once again, always at the 0.5 GHz. I came back to 10 Windows, I did some research and I used ThrottleStop. I checked the BD Prochot and then the laptop came back to life with 2.9 GHz frequency (for the sake of accuracy, it works even without turning on butterfly stop... you just launch the app and uncheck the prochot).

  Now, the problem is that I can use the laptop with all his abilities that I run butterfly stop. In all other cases, even when I start my laptop, the frequency is 0.5 GHz (and you understand that it works at low frequency because it lags a lot). Study a little, I found that only the replacement motherboard can really solve this problem...? What do you think? Do you have a any solution?

  Update: after reading several reviews of users having the same problem with the other model of laptop Yoga I tried a switch forced out of the laptop by the power button... Well... it seems to work. Now the multiplier is not more frozen and the Prochot is set on no.
  Look at this topic for other info
  https://forums.Lenovo.com/T5/Lenovo-Yoga-series-notebooks/Yoga-3-11-CPU-stuck-at-0-48-GHz-99-of-the-...

• Release of the 6s iPhone screen lag more after

  I bought my iPhone 6 s Plus(128g) last week

  day before yesterday, I found that my iPhone will be trolling after I unlock it.

  After that the phone is in stand-by for a few minutes when I unlock guard frozen for a few seconds, screen lag, status bar disappears, etc...

  and I went to the Mall fairview Apple Store to Exchange FOUR times! But it's always arrive on each iPhone brand new more 6s

  It's a software problem, iOS 9.2 on how to solve this problem of relaxation...

• Cannot format or reset Sandisk Sansa Sport

  I tried to erase this player under linux

  and then Linux says:

  org.freedesktop.UDisks.Error.Failed: error creating partition: helper came out with exit code 1: in part_add_partition: System = / dev/sdb, start = 0, size = 4081057792, type = 0x0c
  Entry parser for MS-DOS (offset = 0, size = 4081057792)
  MSDOS_MAGIC found
  looking at the part 0 (offset 0, size 0, type 0x00)
  new entry of part
  Watch part 1 (offset 0, size 0, type 0x00)
  new entry of part
  Watch part 2 (offset 0, size 0, type 0x00)
  new entry of part
  looking at part 3 (offset 0, size 0, type 0x00)
  new entry of part
  Analyzer of MS-DOS that exists
  Detected MSDOS partition table
  schema of table containing partition = 0
  I have it
  got the drive
  Error: Can't have a partition outside the disk!
  ped_partition_new() failed

  Then after that the player says: file system error.

  drive format or reset.

  Windows will not fit. It detects sandisk as a hard drive, but

  won't fit. So it is now frozen.

  This same phenomenon occurs with sandisk sansa Jam.

  Then I also had the Sandisk sansa clip and it worked

  always well with Linux (xubuntu).

  It is likely? Thank you

  How to get a useless Sansa Clip works again

  user XSCD, 16/10/2008

  http://forums.SanDisk.com/T5/Sansa-clip-Sansa-clip/need-tech-help-restore-partition-s-filesystems-et... ghlight/true #M8170

  1. Reformat Sansa Clip flash memory and install a FAT32 file system. You can reformat in Linux using Gparted, but the Clip still won't work because the Clip wants the exact settings that Windows uses when it formats a blank disc. However, reformat the Clip in Gparted will serve to ensure that it will not work absolutely nor be recognized by a Windows machine. So go ahead and this once if you wish. Then connect the Sansa Clip USB2 to a computer running Windows or Vista. Then use Windows File Manager (Windows Explorer) to try to open the drive letter of the USB Windows detected device. Windows will give you an error message saying: the drive is not formatted and offer to format it for you. Choose the FAT32 file system and uncheck "quick format". Then let Windows format the Sansa Clip flash memory.
  2. Once the Clip is in the Windows format, delete ('remove hardware safely' icon in the system tray, then unplugging the USB cable). Then go to SanDisk.com and download the "Sansa Updater." This application is update the firmware for the Sansa Clips that are already working, but believe it or not, it can also completely restore the firmware and de-structure of directories and files including the Clip needs to run. After downloading and running or installing the update for Sansa, close the program. Then reconnect the Clip on Windows. It must be recognized and the Sansa Updater program may start automatically. If not, then find the Sansa Updater in the start menu, run it and follow its instructions. It will get your Sansa Clip, then download the latest firmware, then restore your Sansa Clip used-to-be-there's no need to Virgin State, approved, completely updated

  Here is a link to the software update Clip Sport: FW 1.29

  http://forums.SanDisk.com/T5/SanDisk-clip-sport/SanDisk-clip-sport-firmware-1-29-released/TD-p/35208...

• Fuze is frozen and does not

  Hello

  I have some bad problems with my sansa fuze

  This is the second, which is not verry good work (the first hatd a big issue too... when I pressed everything anything the screen is down)

  now my rocket often gets frozen...

  First it was al ready, so that the battery has been used and closed the "rocket" down (after ca 20 or 24 h)

  then I could recharge the player and all worked normal...

  now, it shows a white screen with a few red and yellow pixels... It turns off, so that I can't do the same thing as befor...

  I've updated...

  I format

  I have reset (up to 30 seconds...)

  but nothing has worked... What do I do? #

  Please help me

  MFG Zian

  PS im German and my English is not very well... hope you understand

  zian wrote:

  Hello

  I have some bad problems with my sansa fuze

  This is the second, which is not verry good work (the first hatd a big issue too... when I pressed everything anything the screen is down)

  now my rocket often gets frozen...

  First it was al ready, so that the battery has been used and closed the "rocket" down (after ca 20 or 24 h)

  then I could recharge the player and all worked normal...

  now, it shows a white screen with a few red and yellow pixels... It turns off, so that I can't do the same thing as befor...

  I've updated...

  I format

  I have reset (up to 30 seconds...)

  but nothing has worked... What do I do? #

  Please help me

  MFG Zian

  PS im German and my English is not very well... hope you understand

  Sounds lie you have one this time with a broken screen. I try and send it back or contact SanDisk.

• Pop and crackle sounds and video lag during navigation

  About 20-30 minutes after a restart fresh, whenever I open a browser or even whenever I browse any browser my sound lag and delays in video playback. In this case if I watch a video on VLC or MPC or listen to music on Winamp. Also my RAM swells upward as time passes, after a few hours of coupleof I have to restart because RAM is highest at about 60-65%.

  These are my specs:

  Windows 7 Ultimate 64 bit

  I3 4130
  8 GB DDR3 1333 Mhz
  SanDisk 128 Gb SSD (main system)
  Seagate 1 TB HARD drive
  Seagate 500 GB HARD drive
  GT430
  Motherboard: Asus H81MA
  Sound: Realtek onboard
  PSU: Black Master 600 Watts PS60MPBM

  Thanks in advance! :-)

  Hello

  Sorry for the delay.

  The problem is gone because I have re-installed Windows 7 and then I discovered through DPC latency Checker that my Antivirus (Avast Internet Security) has been the cause of the problem he was creating explosions of constantly high latency. The fact that the Antivirus has been 'real time' to make disturbance, Malwarebytes is not always the cause high latency.

  Thank you very much for your help!

  Rafael

• Just bought ss12 but lag on video filters / render big time.

  I have been using adobe premierePro 6 / canopus edius 6 so far. I recently bought a kit for a canon 6 d, which included the ss12. So I was happy at the idea of another environment that I have heard so much. The thing is that my projects look like 30 GB (weddings, etc.) and im getting problems with DCs / gal / make it big time. I have used other programs on this pc so its nothing on pc specifications etc. Canon 6 d files are full HD, so they are great and I import them directly from the camera. Means that means ss12 is meant "light"?

  Lito 6 d

  Thanks for the reply with the details.

  At first, please let me you have confirm... given the same computer, do you want to say that a project (full content) can be done in Premiere CS6 cannot be done using the first 12 items?

  You wrote

  Rendering of images on the timeline with effects etc to properly preview on a 8 min project becomes like 10 minutes. If I do not I do not see the clip that I edited because it gets frozen (not just lag). Is this normal?

  Yes, may be normal for unreturned timeline. When the source media are imported, if the preset project is set properly, the present content timeline with no coloured line, indicating that you look the best possible overview of the reading of the content of the timeline in the monitor of editing area. But, once the changes start, then rendered timeline is necessary to obtain the best possible overview of what you see in the monitor area reading Edit. This interpretation of the chronology is particularly important when effects, transitions, titles and non-native formats are involved. When it comes to timeline render times, that will depend on what has been applied to the images... example, application of the video stabilizer can add minutes at a time, while the brightness could add only seconds. But the important issue here is that, even if you have a card NVIDIA CUDA, Premiere Elements cannot benefit at the time of rendering timeline or indeed anything else compared to first CS6.

  You wrote

  For the pc specs: win7 64 bit, i7, 12 GB of ram, 4 GB quadro.

  Your background, I guess that the i7 is quad-core. Can we assume that the NVIDIA Guadro driver version is up-to-date according to the manufacturer of the card? Premiere Elements can take advantage of CUDA like Premiere Pro cards. So, generalizing, any card of video/graphics card NVIDIA or ATI with a driver update version should work with Premiere Elements. Regardless of the version of the adapter driver, updates... except in the case of the first elements 10 NVIDIA GeForce number where is a roll of version of the driver (to may 2013) must have first items 10 to work.

  If you increase the RAM installed to 32 GB, think that any significant change in the first 12 items change in performance.

  On the other hand, do you have problems with an 8 minute 10 GB Timeline, zone Edit preview and export? If not, where is the cut for any problem in relation to the problems - 16 minutes 20 GB, 32 GB 40... ?

  The question

  Means that means ss12 is meant "light"?

  If 'light' is used in the context of the overview and Premiere Elements is 'lighter' CS6 first in what it can not take advantage of the first CS6 CUDA NVIDIA GPU - acceleration and Adobe Mercury Playback Engine to decrease the time of rendering of chronology.

  For anything else, I would need to see more data in your workflow for the rendering time performance and export quality and the time.

  RTA

• LM4 Interface Delay/Lag

  Greetings,

  We use LM4, vCenter 4 with a 2 cluster nodes. What we see: when users interact with the virtual machines via the web interface of LM there is an occasional delay, ranging from 2 to 10 seconds. They keyboard and mouse inputs will be frozen, and then after the delay, he will repeatedly enter a character. It is particularly stressful for their command line operations.

  What make me scratch my head - the same problems do not appear in the console vSphere. Running the console vSphere and LM interface side by side, there is never a lag.

  Other interesting articles, when this shift happens, it effects all users connected to a virtual LM machine at the same time.

  Any ideas on where to start? We don't have any bandwidth problems, we lack gigabit all the way from desktop computers to the ESX cluster.

  -Thank you

  If he repeated delete file queries in vCenter, I hope you can determine the path of the folder.

  If you have a path like:

  vmfs/volumes /.

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Calendar Apple App Bug frozen works only with iOS 10 update grrr

  Since I updated to iOS 10 (more more later than 10.2, etc.), everything was not too bad except THE APPLE CALENDAR app, its deiving me crazy when I click on the app it's like it freezes and past shift x 50 mode still something to do with the calendar app will cause either a frozen or a black screen or white and then crashed ack to main menu. Sometimes it will allow me to create but will be trolling with typing and finally crashed or not even save it... Please HELP I am sure what else to do, I tried to download google calendar and which seemed to have something of bug he loves too then something happens. And I tried to delete it and download it again, / force delivery, nothing has changed

  Hi there calsparks!

  Thank you for bringing your question on the calendar of freezing and trolling since the update to iOS 10 on your iPhone for Apple Support communities.  I rely on the calendar to keep my life organized, so I'm happy to help you resolve this issue today.

  Looks like you did a few good troubleshooting by force to leave the app, force to restart the iPhone and deleting and reinstalling the application calendar.  At this stage my next recommendation would be to backup your iPhone, then erase and restore your iPhone as a new device, then test calendar to see if it behaves correctly, and then restore your backup.
  

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• Why can't Photos read my sandisk sd card, but no viewfinder?

  I have a lot of cameras, and when I plug in my sandisk sd cards in my computer, I can always browse clips in the finder, except when I record the images of my panasonic ag-ac90 which shows nothing in the DCIM folder. Why is this?  I can view in newspapers and photos and transfer images in Final Cut, but why can't I see my images directly on my sd cards when I use this camera?  What is a camera problem or mac?  If anyone has an answer, I would be very happy.

  Thank you

  Ryan

  I guess the problem is with the way the cards are in the format. You should try to access cards with Capture of Image utility in the Applications folder.

• Sierra - Menu bar - Beachballing with frozen time

  Since Sierra on 2 MacBook that I sometimes noticed that the time in the menu bar is not updated and if I put my mouse over the menu bar it is beachballing.  A restart of the MacBook solve the problem... until next time.

  Anyone else seeing this?

  

  I see this same question. I noticed is all the native OSX system elements in the menu that are frozen bar (volume Yes, wifi, battery, time, airplay, siri, etc.), but the non-native elements are not frozen (slack, dropbox, etc.).

• My phone is frozen on the apple logo.

  My phone is frozen on the apple logo.

  Try a reboot of the force.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, try the Recovery Mode > If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• iOS 10 update failed iPhone 6 now frozen on the Logo screen

  I connected my iPhone 6 (he was stuck in endless loop Recovery Mode with closed force) to iTunes and tried to update to iOS 10. After about 20 minutes, the update failed. Now my phone is frozen on the Logo screen with the loading of updated under him bar. Force restart it brings back me to the screen in recovery mode.

  I also tried to use another cord, restarted my computer, update iTunes... nothing seems to work. I tried this several times in the last 36 hours with ZERO luck.

  MY camera got in as recovery mode well once completed the download of ios 10 on itunes.

  I had to unplug my phone and plug it in again... Make sure that all drivers are up-to-date. attention to any message of warning or error code filling on your itunes.

  ITunes and the computer must be updated. the cable must be the original.

  Although I made a backup, recovery mode was not something I wanted. It worked for me, once I followed this step.

  Install the latest version of iTunes. (12.5.1.21)

  1. Restart your computer.
  2. Automatically search for updates of your Mac or PC. If you restart your computer for an update, check the updates again after the reboot.
  3. Strength of your unit to restart. ()When you see the option restore or update, choose update. iTunes will try to reinstall iOS without erasing your data. Please wait while iTunes downloaded the software for your device. If the download takes more than 15 minutes and the device out of recovery mode, let the download is finished, then repeat these steps.)

  The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch - Apple Support

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• Mac Mini frozen

  I have a Mac Mini that is frozen on the Apple Logo page, the progress bar gets just under point to half way and stops. What could be the problem? Solutions? Thank you

  Check this http://www.macworld.co.uk/how-to/mac/steps-fix-frozen-mac-3426075/