FSX error 1722 running Vista professional
After several installation attempts and 6 days of searching for help, ideas, fixed, I resort to posting here. I get the error 1722 and 1603 tries to install FSX. I don't have something new installed on the PC, nothing has changed. Only thing what the machine is to download and install MS. updates So it was not a third party add on which caused activation expire. I am an Advanced Server 2003 MCBS and it baffled me. I went through all the security and entered reg (class). Double security WMI enabled. unreg MSI, MSI regsrvc not luck. Reinstalled Windows Installer 4.5, no joy! Short of reinstalling Vista, I see no other patches. Apparently, Microsoft would have come out now with a hard fix for this problem. I tried every fix suggested on MSDN and MS support KB. Suggestions?
Finally understood when FSX would hang on to the entry in the register and give error 1722 and 1603, which writes to the registry was the main issue. I tried to give myself and set permissions in the registry. My UAC (User Account Control) Security Center turned off. I activated my account and UAC after restarting froze. I did a different administrator account for myself and tried to install FSX. It installed and activated.
My suggestion is to make an another administrator user account. It worked for me, maybe it'll work for you.
Tags: Windows
Similar Questions
-
Microsoft Flight Simulator FSX ceased work and the error 1722 / 1603 when trying to reinstall
Try to install FSX after I uninstalled because it fail to start a running OK OK before that. Get error 1722 - there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your seller to support personal or package. This error occurs when you try to save the fonts. I also have the error 1603 Fatal error during installation. Get help with Windows Installer (Msi.chm or MSDN for more information.
Hi Kenneth Brockway,
· What version of Windows is installed on your computer?
I suggest you to read the following article in the Microsoft Knowledge and check if it helps.
Error 1722 when reinstalling Flight Simulator X
http://support.Microsoft.com/kb/928080
Error message when you install a Microsoft game or a mapping program
http://support.Microsoft.com/kb/258496
Hope this helps
-
Error 1722 FSX 8 windows installation
I tried to get FSX installed on my windows pc 8 I had it installed once and it worked but I had a hard disk problem and did a reset of the programs and the windows files 8
When you try to reinstall FSX it came at the end of this error 1722 and then cancels the installation and come up with another error to halfway, while rolling back and now I can't get install.
Hi jscott2045,
Thanks for posting in the Microsoft community!
I'm sorry to hear that you can not install Flight Simulator X.
What is the full error message/code?
Exactly when you receive the error?Please follow the steps below and let us know if that helps.
1. click on the download the Software Licensing System Reset Tool package now link to start the download.
http://download.Microsoft.com/download/1/c/d/1cd508f9-7520-4659-A122-a26e8804e884/MSKB928080.exe
2. When you receive the file download dialog box, click Desktop, and then click Save.
3. when the download is complete, click Close.
4. double-click on the MSKB928080.exe file to your desktop.
5. When you are prompted to accept the license agreement, click Yes.
6. extract the files in the following folder:
C:\MicrosoftKB928080
Note If you receive the file Open - Security warning dialog box, click Run.
7 run the software licensing system reset tool. To do this, follow these steps:
a.Press Windows key + R, type cmd in the search box and press ENTER.
b.At the command prompt, type the following command in the command window:
CD C:\
c.Press Enter.
d.Type cd MicrosoftKB928080.
e.Press Enter.
resetsldl-all f.Type.
Press Enter.Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.
-
Firefox 3.5.1 running Vista stopped work, no error message. Tried to uninstall and install the updated version. Download the message that I first need to close Firefox, but it is not obviously executed.
This has happened
Don't know how many times
I restored my system to an earlier date, December 2009
User Agent
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; Dealio Toolbar 3.1.1; .NET CLR 3.5.30729; .NET CLR 3.0.30618; NET4.0C; AskTbWCL/5.8.0.12304)
Firefox can not run visibly, but is probably running in the background. It is in the Task Manager. To access the Task Manager go to Start and type in taskmgrsearch field. This will open the process task manager. Then go to the tab processes and end firefox.exe. After the end of this process, close the Task Manager and try to re-run the installation/uninstallation.
-
Hello, I hope someone can help. I use Windows 7 64-bit. on a high spec pc. When you run FS2004 (Flight Sim program) I get the error message "" run-time error '429': ActiveX component can't create object ". " That seems to relate to the flight or the CMF management computer program. This error seems to inhibit access to the CMF. I tried to load the latest ATI driver, but that makes things worse. Has anyone encountered this problem before? Hope it
Thanks in advance
Ianzee
Hello Diana
Unfortunately, none of the above worked. However, I downloaded a file recommended by Flight1 (the creators of one of the 2 games I had problems with) surprisingly, thisinstantly solved the problem it is called http://www.flight1.com/dx7vb.exe.
Perhaps in the future someone else have this same problem with Vista 64-bit where the game, they could also try this "correction". Of course, it worked for me!
Thank you very much for your help & trouble in front of me, it is appreciated.
Cordially Ianzee
-
Unspecified error occurred during System Restore.Running Vista Home Basic 32 bit
After running system restore and restart my computer, I get the message "unspecified error occurred during system restore. I'm running Vista Home Basic
32-bit. someone at - it a response? I have no idea what to do next.
Hello
This can help you:
1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
2. try to use Safe Mode system restore.
http://bertk.MVPs.org/html/restoresysv.html
3 Malware will stop at the system restore.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
See you soon.
-
When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".
Hello
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
RDP of Vista professional for 2008 Server error
I'm running Vista Business SP2 tent to connect to a Server 2008 SP1 via Remote desktop (rdp client 6.1) but after entering my user name and pw I get the following error.
An of authentication error code: 0 x 507.
Remote Desktop is enabled on the server with allow the connection of any version of selected remote desktop. I can connect from an XP machine very well. It is therefore something with Vista. Any ideas?Hello ITGIRL17,
Thanks for posting on the Microsoft answers Forum.
The question you have posted is related to connecting to a Server 2008 and would be better suited to the Discussion Technet community. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads
They should be able to help better the Forum answers is related to the question of consumer.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Error 1722 when installing FSX windows8
I tried to get FSX installed on my windows. I had installed it once and it worked but I had a hard disk problem and did a reset of programs and windows files 8.
When you try to reinstall FSX it came at the end of this error 1722 and then cancels the installation and come up with another error to halfway, while rolling back and now I can't get install.
Hi John,.
Sorry to know that you are facing the issue during the installation of Flight Simulator X on Windows 8. The 1722 error message is a General Setup error message that States that a system level failure has occurred.
Follow the troubleshooting steps suggested by Abdul Cyril Kola of this link and check if this may help:
Also see this Microsoft article:
Error 1722 when reinstalling Flight Simulator X
http://support.Microsoft.com/kb/928080/en-us
I hope this helps. If you need help with Windows, let us know and will be happy to help you.
-
E6500 controlVault vista professional
I had to reinstall vista Professional (32 bit) on an old latitude E6500. I had downloaded the last CAB file and all of the devices have been identified either properly by installing or have look for drivers in the cabin unless the Broadcom USH device. Research, I found that it was controlVault pilot.
ACR by default so that it has not installed so I uninstalled it (got to the point where I get a "new hardware found" notification when I boot) for windows really knows about it.
I downloaded Setup driver controlVault from dell CV_Drv_Setup_R5W65_A10_32bit_ZPE.exe support site. When I run it, I get an error saying that the wizard was interrupted before control host arch components installer could be completely installed. There is a check box to view the log of installation and when I discovered that the error says "error 2732. Uninitialized direct Manager. »
Is there something I need to install everything first to get a "Directory Manager '? I tried to install the vault of diagnostic check and installation also said that it was interrupted before finishing.
Figured it out. Displays Setup driver needed at least SP1. When I installed that, it worked.
-
Re: Satellite L500 - Temro number - package error 1722 Windows Installer
Hello, I bought Toshiba L500 in January, but I could not update with Tempro since May. Towards the end of the installation, the Setup program crashes and it says the following in Turkish:
"Hata 1722. Drinking Windows Installer paketi Island boğulma bir sorun var. Kurulumun bir fates? CAL olarak? a beklendi program? I have gibi sonlanmad?. Destek sorumlunuza veya paket sat? c? s? BA na? vurun. »
If I translate briefly, it
"Error 1722. There is a problem with the Windows Installer package. The programme of work as part of the installation has not finished as expected. Applies to your seller of service or support package.
I have download the Tempro installation file, but whenever I start the installation program, it always says. How can I update my laptop?
Thank you for your interest and responses.Hello
If the error 1722, this means that a program run as part of the Setup did not finish as expected
Please see the new version of Tempro here:
http://EU.computers.Toshiba-Europe.com/innovation/generic/TEMPRO_W7_RELEASE/I installed Tempro and is worked so I guess that it s a problem with your Windows operating system.
-
ENVY 5530: Impossible to install the HP drivers: error 1722
Hello
I have a major problem with the HP Envy 5530. At first it just prints nothing but scanning was very good. Then one day I got I decided to fix it. I ran a few fixers print spooler and it looks like they just remove a bunch of files. Then I went and deleted the printer drivers in system32. Now when I want to install the HP x 64 base drivers, it gives me an error:
Setup error
Error 1722: Cannot add the Port Discovery HP Monitor (HP ENVY 5530 series) port monitor.
I use 10 64-bit Windows.
I want my printer to work again. I would like to avoid having to wipe my os.
Weird things are also underway in the services menu. The "PrintNotify" service is offline with error code 2 and print spooler is running, but when I go to WordPad and try to print it says "Do you want to install a printer now?" and then I click Yes, "Windows can't open Add Printer" the local print spooler service is not running. Please restart the spooler or restart the machine "."
I want real solutions, as I have tried several of those mentioned in article 'driver install errors' which does not even cover error code 1722.
This problem has been resolved. I inserted the disc of Windows 10 and did an upgrade on site to keep all applications and settings, but reinstall windows. This has removed all the corrupted windows files and now I'm at square one (I'll create another problem for her, since it is not really related).
-
Error 1722 to the deployment of Installation Windows 7 LabVIEW applications
Hello
I use version 8.5 of LabVIEW Application Builder to deploy my standalone executable. I have never had a problem on Windows XP and have been very successful on Windows 7 installation. But now I have a client who gets the following error in Windows 7 (but the same installation package works very well for him on XP machines):
Installing NO-SUN 1.7.0f0, part 10 of 19 with error 1722.
Error 1722. There is a problem with this windows package install. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package. Contiunue Y or N.
(Engineers application OR in particular) anyone have any ideas? (My contract has expired. I think that there is a way to report bugs, but is there a way to contact support OR directly in addition to this forum?)
Thanks for any help.
Ed
UPDATE:
Good news! My client back to me and told me it was his anti-virus (Trend Micro) that caused the error. When he disabled as I suggested (which I have a base of knowledge OR "Error 1722" article), the installation was successful.
Thank you all until next time...
Ed
-
Error 1722 when installing system update
During the installation of System Update on my ThinkPad X 41 Tablet (WinXP) I get the following:
"Error 1722. There is a problem with this Windows Installer package. A program run as part of the installation ends as planned. Contact your provider to support personal or package. "Action StartSuService.EXE, location:...\startsuservice.exe"
Any ideas? All the input greatly appreciated.
Hello jdz,.
Only, I solved the problem on our laptop. Maybe the following instructions
can help you, too:
I found a service called "system update". This service was not running,
and I wasn't able to change the startuptype (disabled, manual, auto).
I tried to remember the "StartSuService.Exe" error message
the laptop for this file, but could not find. I found my own pc (office)
This file ("C:\Program Lenovo Update\StartSuService.exe'),It was manually copied to the same directory on the laptop and finally started
There are.
There was the bat hurt: I managed to install the current version of "system update".(each question if the installation can retrench was replied 'no') and
It is run "fine", download and install the software.
Try it and let me know.
-
Hello. I've been running Vista SP2 on this computer since last January. Received fine updates. I had also installed MS Office student edition and allows to get updates. Recently, I have Office 2007 Enterprise edition and I installed it (for outlook & editor). Since then, I was not able to get the security updates. My computer will display I have 17 updates, but they fail to install. I went to the site of a genuine advantage validation and validated Vista & Office.
However, when I get the error code and go to proposed sites such as this http://support.microsoft.com/default.aspx/kb/933528... I get an error message
This article applies to a different version of Windows than the one you are using. Content of this article is not relevant to you.
Visit the Windows XP solution CenterWhy is this happening? Why Microsoft update thinks I have XP? How can I solve this?
Thanks for your help.
Shankar
I followed the methid described elsewhere... Turned off the coast of control user account and updates have been installed correctly... I turned it on...
I am an administrator on this computer. Why did I have to do this? This will be the case from this point on? Thank you! Shankar
Maybe you are looking for
-
Can't access 1 site - no solution found
Because of this problem, I have uninstalled and reinstalled Firefox from the authentic site, so I have the latest version. I can access any Web site (I've tried) of Firefox, except the following Web site: http://members.amazingacademy.com. I can acce
-
Pavilion sleekbook 15: cannot install network controller
Hello guys. Happy new year My HP Pavilion model is 15-b146sa and I am using Windows 7 ultimate x 64 (and I did). The problem is that when I try to install a driver, I do, but a few seconds later he asked me to choose between two options. The first is
-
While working on the internet, all of a sudden we lost the connection and have not been able to return error response "Impossible to connect to the internet at this time..."... State of the network enabled and he showed limited/no connectivity-one fi
-
Windows 7 on 3000 N200 0687?
Hi all I have a Lenovo 3000 N200 0687 - computer A11 laptop, and I am wandering if anyone has installed Windows Se7en on your laptop like mine, and I would like your comments how it works and if there is no problem? I'll install dualboot - with XP. T
-
Hello This is my first time to a post here, so I'll get to the point. So, recently, I just had a virus on my laptop, everything is resolved except my audio problem. I had to go into "Safe Mode" while the virus was LURKING in my laptop, I had deleted