FSX joystick settings disappear after closing program
I'm under Flight Simulator X on Windows 7, 64 bit. I have a Saitek yoke and pedals for rudder CH. I'll have to set up and calibrate the yoke and pedals whenever I start Flight Simulator x, because the settings seem to be reset after I close the program. I've never had this problem until I went from Vista to Windows 7.
The yoke for twenty years of odd functions, it becomes very irritating to say the least. I have tried to make profiles and save them, but no use. Has anyone else had this problem and with success the fixed?
Thank you!
Hi sfergson727,
1. what version of Flight Simulator X are you using?
2. did you of recent changes on the computer?
3 when was the last time it was working fine?
I suggest that you download the drivers for Saitek yoke and pedals CH rudder on the manufacturer's Web site and then install the drivers in compatibility mode, check if it helps.
What is program compatibility?
http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
shortcuts to the language bar disappear after closing of the station
If one instituted in entry by using the language bar shortcuts they disappear after the closure of the station with win + L. How can I fix it?
Here is how I could solve the problem:
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-desktop/custom-hotkeys-to-change-input-language-disappear/66d1d89d-e5dc-41e1-a8b3-48d596ab8e11?page=4&TM=1391057416056#LastReply -
Programs disappear after closing down
Programs disappear on my Mac pro after stopping down especially vlc player which I n takes!
Oh, give us a few tips over!
Where was the application (internal drive or external drive)
Did he have an alias and it was on your dock?
-
Web site will not disappear after closing the tab AND restart Firefox.
I went to a website to watch a video, and when I had finished I closed the tab on what the site was. When I had finished on my computer, I closed Firefox. The reopening of Firefox later he restored the page. I don't know why it does this, and I can't make it disappear. I deleted all my cookies/cache, etc., as well as do a virus scan and nothing can tell me why this is happening. It's pretty boring, and I would that my browser to work properly. I've recently updated to the latest version of Firefox, so everything is up-to-date. I'll take any suggestions anyone can throw on me because I am fresh out of ideas.
Thanks in advance.
Hello
Thanks for letting us know about your problem. The problem can be solved very easily. Just reset your Firefox and your problem can be solved. To reset instructions, please see this article Firefox Refresh - reset the parameters and modulesPlease let us know if your problem cannot be fixed by above mathod.
Concerning -
Of Mini Windows taskbar disappear after closing one - boring!
When I have several emails open outlook and I want to quickly close a whole bunch of them I want to be able to close the mini window. However after the closure of each of them by clicking on the red x, the set of mini windows disappears and I have to move the mouse down to the button of the taskbar for the mini windows reappear and then I can close one that follows and then repeat again and again. It is very annoying when you have a dozen or so open emails. How can I make other minis windows stay on the screen, so I can just click each red x one by one, without returning to the task between the two bar button? It would be so much faster.
Thank you
Hello
· What is this happens only with windows Outlook?
Step 1:
Open multiple Internet Explorer Windows, and then try to close them by using Windows Ridge previews.
Step 2:
Try restarting in a clean boot to see if you are able to close previews without collapsing the list every time.
http://support.Microsoft.com/kb/929135/en-us
Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
When you are prompted to restart the computer, click on restart.
-
Lightroom develop settings disappeared after a computer virus removal
Hi all
I have a problem with my development settings to find Lr I had problem with virus a couple days where all my files have been encrypted. A so-called virus ransomeware RSA 4096 caused it. They have (support antivirus Norton) has removed the virus for me but they told me that it was nothing I could do with my files photo on my hard drive of the computer. The result was that I had to delete all the files that I had stored. Luckely, I made a back-up, 2 days before (on my external hard drive), my computer has been infected. The problem is, when I try to use my backup catalog I can't access my development settings in images. Everything is zero. RAW file is in place and I can start to change the image of course again, but it's a lot of work. The other strange thing is that all of my files exported JPG also appears in the catalog and I don't really know why... Maybe I'm an amateur, but I would like help, because it frustrates me :-(
Best wishes
Ken
Could you try to open the other catalogs (recent) backup of your external drive.
It is possible that the virus has infected the backup too.
Find your external drive for catalogs. Search for "*.lrcat " and see if it returns multiple catalogs.
You can also see recover the catalog and images after resetting preferences in Adobe Photoshop Lightroom
I use the latest Version of Lr, 5.6
Latest version of Lightroom 5 is 5.7.1. See the maintenance of Lightroom
~ Assani
-
Adobe processes continue to run after closing program!
Hello
I have this problem with Adobe Premiere Pro, After Effects, Media Encoder, and hearing, but not with Photoshop, Dreamweaver etc.
Whenever I close one of these programs, the respective process continues to run in the background.
I can't restart the program until I go into the Task Manager and kill the process (AfterFX.exe, Adobe first Pro.exe, pproheadless.exe)
I already tried cleaning with the cleaning tool to uninstall and reinstall but the problem remains.
I encountered this problem a few months after a long break from Adobe.
Never had any problems before.
I cloned my complete system with Acronis on a new SSD a few months ago...
don't you remember anything else with a lot of impact that could have triggered it.
System: Win7 x 64
Software: Adobe CC
I found the Solution (for me at least)
It seems to be a driver problem with the 600 series of nvidia graphics cards.
I installed the old driver for my GTX 680 and everything works fine now (some newer drivers might also work)
I'll write an e-mail in support of Nvidia and tell them what happened, pls do the same if you found the solution because of this post and
upcoming drivers going to work well for us once again.
Best regards
-
I have already uninstalled and reinstalled Firefox and no dice. If I don't re - create the new profile, I get the error message that the profile is missing or inaccessible while trying to open firefox. I have to open the browser by clicking on the new profile, that I just created in the Manager profile area.
This may be due to a problem with the file profiles.ini.
It is probably best to delete the file profiles.ini to force Firefox to create a new default profile
You can use this button to go to the Firefox profile folder currently in use:
- Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
- http://KB.mozillazine.org/Profile_folder_-_Firefox
- Windows: %AppData%\Mozilla\Firefox\
C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\. - Linux: ~/.mozilla/firefox/
- Mac: ~/Library/Application Support/Firefox /.
-
I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?
Hi Dan, try to run the cleanup (helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html) tool to completely uninstall CC to your computer, and then reinstall the desktop app: creative.adobe.com/products/creative-cloud
-
The digitized files disappear after that scanning with HP Solution Center update
The digitized files disappear after that scanning with HP Solution Center update
Have a HP Officejet Pro L7590 all-in-one. Under Vista 64-bit.
Updated my Center of solutions for version 14. Now when I scan something, it scans OK then when I save to file it away. Looked on the HP site and found Update critical for this problem, however, the critical update is to version 13 and when I try to run it it tells me I need not and will not continue.
Also: (maybe something to do with the problem) when using the / opening of the solution Center, when I goes to the buttons "ScanPicture" or "Scan a Document" and then click on "Change settings" there is nothing in the drop-down list for the ' Scan To: ' section.
Have tried uninstalling and reinstalling several times. Does not work.
See you soon!Hello
Two questions actually related to each other.
Please, try the following:
Make sure that the HP Solution Center is closed.
Enter C:\Program Files (x 86) \HP\Digital Imaging\bin and search for the file hpqxmlul.dll .
Move this file to a temporary folder elsewhere as your office, just to backup porpuses.
Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.
Move this file in C:\Program Files (x 86) \HP\Digital Imaging\bin.
Today the launch of the HP Solution Center and test analysis, check any changes with the sweep for list as well.
Please let me know of any changes.
-
HP Pavilion dv7-4270us. Product #XZ826UA #ABA
UPDATE: I reinstalled drivers all again, with the same results as below. Crash with in the first 5 min to display of average quality settings. So I decided to try the package unistall supplied with the updated driver. I used ATI unistaller package Legacy 13-9 AMD/ATI. UNISTALL the express button. After uninstall properly finished and before I reinstalled the same driver package, I checked to see what drivers were still missing. And that's my ATI Mobility Radeon HD 6370 returned on my device manager after the Unistall. I have not crushed then game drivers or lost when you restart.
FYI back, when I did a clean install on with HP sp50599.exe driver with auto install and even when I did the installation myself, display drivers do not work properly. Not until I used the uninstall program DDU then did a clean install (which means a new driver package never run) with MS 50599.exe, reboot, I then installed the card ATI 13-9 Legacy pilot, (download the fresh). The computer crashed shortly after that, I used the unistaller inherited from 13-9. After Unistalling my drivers. THE pilots finally actually work properly... what a mouthful. Seems illogical, but it is what it is.
The graphics and control are superior to all other drivers. They are here.
AMD M880G with ATI Mobility Radeon HD Driver 4250 Date 29/09/2010 Version 8.770.2.2000 driver
Driver ATI Mobility Radeon HD 6370 Date 29/09/2010 Version 8.770.2.2000 driver
PS: DO NOT LET WINDOWS UPDATE DISPLAY DRIVERS
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
All system devices are woring correctly except those listed below
Communication of i/o port ATI SMBus Controller
Direct memory access controller
High precision event Timer
Numeric Data Processor
Speaker system
System clock
------------------------------------------------------------------------------------------------------------------------------
NO CHANGE TO THE SYSTEM DEVICES... AS STILL IS THE LIST HERE... NO CHANGE
-------------------------------------------------------------------------------------------------------------------------------
Same Message on all devices / not Woring: No. drivers installed, any necessary files or installed. I did all the checks / update driver, disable, enable, and uninstall find the hardware changes in that order with the same Message / no drivers installed files - No not required either on installed
AMD / ATI switchable graghics. Ati HD 6300 drivers disappear after use / restart. I have to reinstall both HP sp50599.exe / then ATI drivers inherited from 13-9. He works for a short time, then goes down the chart high-definition and which X 11. 4200 drivers are fine in Device Manager but no driver HD 6300. I think they were the 6300 series cannot be verified until I have reinstall the GPU drivers because they appear in Device Manager. Think also that the Mobility Radeon is a M880. Checked for hardware change and found nothing. Uninstall AMD did not have Direct X 11 work properly, that it ran slowly and hot even on smaller settings if the Direct X 11 works not at all. The DDU uninstaller it works beautifully not running hot with the default game settings are almost at the upper end. Beautiful graphics and very smooth controls. But now the fall on the problem with the display drivers. I use the xbox 360 controller pc hand instead of via USB key board. I did have a problem with any top end games (Deus Ex human Resources, Tomb Raider, Batman Arkham City.) Until I ran FFXIII-2, it is a terrible and taxed my graphic system console port and crashed it. First noticed HD Audio dropped then rendered account that this view HD controller did not work. Now when I reinstall display drivers other games live X II causes the crash.
Thanks for any help,
Operating system: Microsoft Windows 7 (64-bit) -
Tecra M7: Tablet does not work after closing the lid
Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20
Does not happen on hibernate or sleep.
I have the set cover to do nothing on close.Hello
What do you with Tablet does not work after closing the lid?
Is - what the laptop freezes or what? What happens exactly?Closing the parameters adjustable lid to Hibernate or standby mode or no action.
These settings can be defined in configuration power saver actions.If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!
Best regards
-
Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2
Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.
Thank you!
Hello
Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/========
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
new addresses disappear after a reboot, I do something wrong?
When I create a new address in the adresslist, he disappeared after that I have to restart the program.
It's probably something, but I can't. In the past, it works well, but I don't know what I did
or not done to create this problem.I'm not sure that we have an answer prepared for that in this new forum, but here is a link to the old forum where this issue has been addressed previously.
https://getsatisfaction.com/mozilla_messaging/topics/address_book_impossible_to_update_contacts
In summary:
- Export your address book
- Delete (or elsewhere) the Thunderbird profile directory .mab files
- Import your address book 1)
-
Error after closing Firefox window!
Hello
After closing Firefox, an error window appears. And after closing this window appears a smaller.
Please help me.
Best wishes
NickWhat are the mistakes you are seen to appear?
Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker. Once you do, you can turn off this add-on and report the problem to the developer of this - on Add.
A few other basic problems you can try things is the following:
Run all Windows updates, install all required service packs, etc.Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.
Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.
Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.
Maybe you are looking for
-
Linux I get an error message when you run java in notebook.
I am trying to run a simple java script from Scratchpad. <html> <body> <h1>My First Web Page</h1> <script> document.write("<p>My First JavaScript</p>"); </script> </body> </html> ###### <html> <body> <script> function myFunction() { var x="",i; for (
-
At my Satellite A60 bluetooth?
Can someone tell me if my computer has a Bluetooth? I have a laptop Toshiba A60 and I can't find this device. I have a mobile phone with Bluetooth and want to put pics on the computer by using this method. If I don't have Bluetooth on the computer wh
-
Problem with the display of the current time on a chart
Hello I am strugglering with my software to make it work correcly. I just got a problem left: I'm programming a software to record the temperature by thermocouples. The thing is, I used a property node to display my current chart... So far, no proble
-
How one to check if the resulting KB931125 installed or not
Original title - KB931125 where check them out I ran KB931125 but I don't know where to check exactly. I could not find and Aadd and remove programs. Could someone suggest me to check how KB931125 whether installed or not, if installed where I could
-
It's for my computer vista laptop professional 32-bit, I run, I have a NVIDIA Geforce 9600 M GT video card, which displays its colors very well in safe mode which I am right now. I tried to update the driver, and it shows that I have the latest updat