FTP Get file Help

Hello

I try to use FTP Get File to get a picture of my NI1772C smart camera, but I can't make it work. I think the problem is that I don't really understand what I should put in the local path and the remote path box. The image is saved in the root (c:\) directory and the image name is Arcing.bmp and I'm trying to save it on my PC to the C:\FTP folder part of dev. So, can someone tell me EXACTLY what I should put in the remote path and boxes of local path? I tried 1 trillion combinations and nothing works.

mprevodnik wrote:

I don't know, it doesn't say. I have no problem to get the files out of it by other means, such as with FilleZilla, or only through the cmd console.

Most likely it's not Windows, so don't expect C:\arcimg.bmp to work! FTP works normally with the railways of Unix file with a common root of / and it is very unlikely that the camera would be empty all images in the root directory. So, you will find the structure of files from your camera and ask a path that exists.

FTP is also the LS command that lists the contents of a directory. And PWD to return the current working directory. Use CD to go to the next level! With these three you should be able to determine what is the structure of directory on your camera.

Tags: NI Software

Similar Questions

  • How can I delete the file on my hard drive RT after getting the file to the PC host using FTP Get file vi?

    I want to get a file on my hard drive of the cRIO to my host PC. I did it by using the FTP Get file vi. After you save this file in my host PC, I want to delete the file on the cRIO. Is there a direct way to transfer the file to the host PC cRIO or do I have to manually delete the file.

    Concerning

    Dude

    Hello

    You must manually delete the file.

    Concerning

    Visuman

  • FTP Get file error

    Hello!

    I try to use FTP_Get_File.vi to transfer a file from a ftp server on my computer. But whenever I get the following message is displayed:

    "Error 0 to ftp validate the data connection: invalid data connection.

    However, it works using a traditional FTP (FileZilla) software program using the same host/RemotePath/password.

    Someone has an idea to help me understand this error?

    Hello

    The screws of FTP are (at least until BT 8.5) open, so you can dig in to see where the error occurs.

    If this is a problem with the data connection (as indicated in the error), you might want to try a passive connection (input Boolean FTP_Get_File.vi).

  • FTP .txt file copied correctly the cRio

    I use the 'FTP Get File.vi"to retrieve a .txt file of my CRio, which is then copied on my host.  The file is a delimited data tab.  The file copied all the data a except that the copy has a blank line between each set of data.  These additional lines take me to read the incorrect lines when the file is read in my program later with the "reading a spreadsheet file.  These additional lines come  I checked the original on the cRio file transfer via MAX and these lines do not exist.  Can someone tell me how to solve this problem?  Thank you

    If you look at the entries for the File.vi FTP Get, you will notice that there is one that says binary:

    By default, this is false, which means that it copies the data in an ASCII format.  Try a real constant of wiring to this entry.  It's the need for VxWorks and Windows use different end of windowing.  This difference is probably the reason that it is adding lines to it.

  • I get «File, edit,...» "on my new laptop. Help please

    I can't get "File, editing, display, history, bookmarks, tools or help" on my new laptop Windows 8.1. Thanx.

    By default the menu bar is hidden and can be revealed with the ALT key .
    Right click on an empty spot on the Tabstrip control and select menu bar, to show all the time.

  • When installing a windows 8, it gets stuck at 82% in «get files ready for the plant» and btw, this is a clean install. Help me

    I did a clean install of Windows 8 in my Emachines D730z. But he's stuck at 82% in "Getting files ready for installation. Help

    My installation 8.1 is also stuck at 82%. I let the installation continues and about an hour later, he was able to exceed 82% and complete the installation.

  • Restriction of size of file on the FTP (GET) adapter

    A customer has deployed a BPEL process that we had created that use the FTP adapter to download (GET) files. The customer reported that when they try to download a large file (about 800 MB in size), the process does not seem out for more than an hour. At this stage I don't know how a good or bad the network speed is and how long a download FTP of a file of this size. But before looking into that, wanted to know if there is no restriction on how large a file can be for it to be downloaded by FTP BPEL adapter. If not, is it possible to know what is the problem with the download or knowledge to the advancement of the FTP GET?
    The talks of the user guide on the increase of the value of timeout of transaction-config in server.xml for the file adapter. Is this applicable for the FTP adapter also and it is going to work if I increase this?

    Thanks in advance for your attention.

    Jay

    Hi Jay

    ODI - integration of data Oracle can be used with BPEL to manage the big transformation file, as is BPEL for orchestration of the company.
    You can take a look @: http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_file.htm#BABDIABG for the treatment of large files with attachment. > 800 MB files with a few setting of the adapter and the best design process should be possible.

    Concerning
    A

  • How can I get a helper.exe file that works so I can uninstall Firefox?

    I'm trying to uninstall Firefox. The uninstall in Control Panel feature does nothing. The file helper.exe in uninstalling Firefox folder does nothing, even when I "run as administrator".

    Try to start Windows Explorer as an administrator by right clicking on its icon. Go to these folders and right click on them. Click on properties and under "Permissions", make sure that all the permissions are checked in read/write. If Windows does not allow them to help, start Windows in Mode safe.

    Start Windows in Mode safe can prevent your computer to run any malware or tool that may block certain administrative actions such as deleting a file, editing a file system, uninstall a program, etc.

    To start Windows in Mode safe mode in Windows XP, Vista or 7, press F8 during the restart until a menu appears, and then choose Safe Mode. Windows 8, you start msconfig (Windows + R), go to the Boot and mark 'start safe mode '. Restart your computer and Windows 8 will run safe mode.

    Once Safe Mode try to perform the action you were trying to do and check if it works now.

    You must remove the following folders, as appropriate:

    • C:\Program Files\Mozilla Firefox
    • C:\ProgramData\Mozilla Firefox
    • C:\ProgramData\Mozilla
    • C:\Users\username\AppData\Local\Mozilla
    • C:\Users\username\AppData\Local\Mozilla Firefox
    • C:\Users\username\AppData\Roaming\Mozilla
    • C:\Users\username\AppData\Roaming\Mozilla Firefox

    Also clean your temporary and garbage files with Windows built-in hard drive cleaner or alternatives such as CCleaner or TuneUP utilities.

    This solves your problems? Please report us!

  • Lab View FTP Put file

    Hello

    I am trying to use the FTP put file VI to get the images out of my smart camera of NEITHER and I can't just not work, and I have no idea what I'm doing wrong. I use FileZilla Server as FTP server on my host PC. The images are saved in the folder C:\Images of my camera, and I would like to save to the folder I shared via FilleZilla, which is C:\FTP. I use the default settings on FilleZilla of IP 127.0.0.1 and port 14147, and my user name is simply 'user '. I followed the guides online available here https://decibel.ni.com/content/docs/DOC-15379 and here http://digital.ni.com/public.nsf/allkb/9A004CF5241F3CB68625779E004EE159?OpenDocument , without success. I know very little about FTP, and I was pulling my hair out, please take a look at the VI joint and try to see what I'm doing wrong.

    I don't understand what you're trying to do. Where is the FTP server and where the customer? Since you are using put I guess that the FTP client is on the smart camera and you try to put a file on your host PC where you have the running filezilla server.

    If this is the case, then all is false. The local file on the camera would be "C:\Images\Arcing.bmp", the path remote "FTP Share/Arcing.bmp. The IP address must be the address of the machine running the FTP server. 127.0.0.1 is localhost. In addition, the default FTP ports are 20/21, but since you left not connected port, this should be ok.

    If the camera has a built-in FTP server, you don't need a different FTP server on the host PC. Simply use Get FTP to copy the file from the camera. Also, in this case, the IP address must be the one from the FTP server (in this case the camera).

  • cRIO FTP transfer file size limit

    Hello

    I generated a data file on my cRIO which is about 2.1 GB in size. I can't transfer this file to the cRIO via FTP. I tried windows FTP Explorer, the built in MAX file transfer utility, coreFTP and WinSCP. I am able to transfer other files on the cRIO which are smaller in size.

    Is there a file size of FTP transfer limit? It is around 2 GB? Is that all I can do to get this file out of the camera?

    Thank you!

    OK, I was informed that there is a CAR on this #252919 issue. VxWorks cRIO targets cannot FTP of files greater than 2 GB. The workarounds are to transfer on a USB key or upgrade to LV2013 and use WebDAV.

    https://decibel.NI.com/content/docs/doc-6103

    http://digital.natinst.com/public.nsf/webPreview/4EBE45E8A816B19386257B6C0071D025?OpenDocument

    Thanks to bouazza Whitaker from technical Applications.

  • "I get,' files for the recovery diskette can not be created ' and I can't save my PC

    When I try to back up my PC, I get "files for the recovery diskette could not be created" how to fix this?

    Hello

    This problem can occur because ASR is not supported in Windows XP Home Edition. However, users of Windows XP Home Edition can access the Recovery Wizard if they install the Ntbackup program in the Windows XP Home Edition CD-ROM Valueadd folder.

    See the steps listed in the article below and check
    An Error Message appears when you try to use the Automated System Recovery Wizard
    http://support.Microsoft.com/kb/302700

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to get windows help & support on my PC

    Is no longer, I can get windows help & support on my PC.  I know not what happened, one day it's simply not there.  Can you help me get it back?

    Hi Celine,.

    This problem may occur if you try to use help in a program that uses a component to help older, WinHlp32.exe to display Help content. Because Windows Vista and later versions of Windows include no WinHlp32.exe, you must install this component to open the .hlp files that were created in the older help content.

    I suggest you to refer to the help article and check if it helps.

    I can't open the help that was created in Windows Help format (WinHlp32.exe)

    http://support.Microsoft.com/kb/917607

    Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows Vista

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    It will be useful. Back to us for any problem related to Windows. We will be happy to help you.

  • Full path to get-file issues

    Hello, I have some difficulty trying to understand how I would correlate Lucd function "get-folderpath" to get the actual file, that it is.

    (Code Lucd below)

    Function Get-FolderPath {}

    (param

    [parameter (valuefrompipeline = $true,

    position = 0,

    HelpMessage = "enter a folder")]

    [VMware.VimAutomation.ViCore.Impl.V1.Inventory.FolderImpl []] $Folder.

    [switch] $ShowHidden = $false

    )

    Begin {}

    $excludedNames = 'Center', 'virtual machine', 'homepage '.

    }

    {in process

    $Folder | %{

    $fld = $_. ExtensionData

    $fldType = "yellow".

    if($FLD.) ChildType-contains 'VirtualMachine') {}

    $fldType = 'blue '.

    }

    $path = $fld. Name

    While ($ FLD.) Parent) {}

    $fld is get-view $fld. Parent

    If ((! $ShowHidden - and $excludedNames - notcontains $fld.)) (The name) - or $ShowHidden) {}

    $path = $fld. Name + "\" + $path

    }

    }

    $row = "" | Select Name, Path, Type

    $row. Name = $_. Name

    $row. Path = $path

    $row. Type = $fldType

    $row

    }

    }

    }

    With the help of this feature I can do a:

    $counter = 0

    $allfolders = get-Folderpath (get-file |?) {$_.name - notmatch ' data centers | VM | host"}) | Select @{n = 'Number'; exp = {$global: counter; $global:counter++}},@{n='path'; exp = {$_.path}}}

    Who will return as:

    Path number

    ------ ----

    0 datacenter1\network

    1 datacetner1\datastore

    2 datacenter1\SIT1

    3 datacenter1\Templates

    4 datacenter2\EA1

    machine virtual datacenter2\Discovered 5

    6 1 datacenter2\DEV

    7 datacenter3\Appliances

    8 datacenter3\Templates\Windows

    9 datacenter4\Templates\Windows

    I would like the user to be able to see that output and decide where to place their virtual machine if she would be so:

    $x = read-host "select the right folder.

    #in that this would equal the actual file

    Get-file $allfolders [$x]

    But it does not work as get-file does not use the full path... is there a way to do this?

    Got what I was looking for help

    #

    $global: count = 0

    $allfolders = get-Folderpath (get-file |?) {$_.name - notmatch ' data centers | VM | host"}) | Select @{n = 'Number'; exp = {$global: counter; $global:counter++}},@{n='path'; exp = {$_.path}}}

    #

    $allfolders

    $x = read-host "select a folder to place the virtual computer in.

    $fullpath = $allfolders [$x] | % {$_.path} | % {$_.split("\")}

    $DCname = get-data center $fullpath [0]

    foreach ($folder in ($fullpath) [1..) () ($fullpath) .length-1)])

    {

    $dcname = $dcname | Get-file $folder

    }

    With $dcname holding the folder object

  • How can I specify a pathname in get-file?

    I use version 5.0 of connection of a vCenter version 5.0.

    My VMs are organized in several files with some folder names that occur several times in the hierarchy.

    For example:

    DCNAME - AAA - XXX

    -BBB - XXX

    -XXX

    How to invoke get-file to access each of the XXX files above?

    I tried

    Get-file 'Datacenters\dcname\vm\AAA\XXX '.

    Get-file '\Datacenters\dcname\vm\AAA\XXX '.

    Get-file 'data centers/dcname/vm/AAA/XXX ".

    Get-file ' / data/dcname/vm/AAA/XXX centers. "

    Each of the above gives me an error "not found".

    Is what I'm trying even possible using get-file?

    The documentation seems said that only one name is allowed and not a full path to this name.

    If get-file cannot do what I need, has someone already written a script for this function?

    In my research I found the Get-FolderPath of LucD function.

    Thanks for any help

    Looks like I'm not not looking for long enough before posting.

    I found excellent function of Get - FolderByPath (LucD) to

    http://www.lucd.info/2012/05/18/folder-by-path/

  • I have Lightroom 1.4.1 and I just started shooting the Nikon D700.  I can't Lightroom to read my new raw files, help...

    I have Lightroom 1.4.1 and I just started shooting the Nikon D700.  I can't Lightroom to read my new raw files, help...  Y at - it a plug-in or update I can get?  I can't afford new software after new camera and lens new!

    Lightroom 1.4.1 does not support native (NEF) files from the D700 because the camera didn't even exist when it was released. To get help, you have two options: upgrade to Lr 2.x (paid for the upgrade) or convert your NEF files to DNG.

    DNG 5.4 converter can be downloaded from http://www.adobe.com/downloads/ (see the right-hand side of the page)

Maybe you are looking for

  • Yet another victim of bullying by the issue of the keychain.

    Keychain became a relentless bully.  We have worked many years in OS X after OS X and, Yes, even with El Capitan. But now the beast hates me and throws me constantly requests for passwords. I tried all of it would have been simple to the most obscure

  • No sound on a new computer

    I have a p6345a HP windows 7 but have no sound, this model has internal speakers and if yes how can I configure it to work on it.

  • Auto Detect does not work; can I switch to MSC?

    After trying all the fixes, I concluded that my auto detection mode just doesn't work and the drivers, or whether it cannot be repaired. my computer (XP S3) simply does not see the sansa clip +. But in MSC mode, it see it.  Unfortunately all the audi

  • Windows 7 backup does not not on my new external HDD

    I have a HP Pavilion dv4-1435dx laptop with Windows 7 above. I just bought a new external hardrive, ST905004EXA101-RK Seagate Expansion Portable 500 GB. I tried to back up my computer to the ext hd using windows 7, but whenever I do, I get this messa

  • ASA 5515 WITH LICENSE OF FIREPOWER

    Hello support team, We have configured cisco ASA 5515, firepower module added in it. Please give technical support to add L-ASA5515-TAMÁS = (Cisco IPS of firepower ASA5515, AMP, and Licenses of URL).