full c but partioned d drive has plenty of space

Similar Questions

• Disk full error but USB drive has enough free space

  I am trying to copy a file to a USB flash drive even if the drive is empty when I try to copy the file, I get an error message telling me that the disk is full.  The file is 8GB and the drive is 32 GB, so there is plenty of room.  How to fix this?

  Most of the USB flash drives are formatted with the FAT32 file system.  This file system cannot store any single file larger than 4 GB. You will need to reformat the NTFS-formatted flash drive to store an 8 GByte file.  (Attention: save all the files on the drive before reformatting).

  "How to use disk management to configure basic disks in Windows XP"
    <>http://support.Microsoft.com/kb/309000 >

  HTH,
  JW

• Local disk C has the least space, where the Local D drive has much more space: problem is drive C starts instead of because...

  I had to reinstall XP. Before reinstallation, D drive was the drive started on my computer and I have not had any problems with space. Obviously I screwed up letting it keep the partitioned drive or what I had to do at some point, because after reinstalling XP C drive the drive that begins (C has no space and D wants everything as before). Now, I don't have enough space to download programs, I need to work from. In fact, I don't have enough room to do anything! C drive only has 7. something GB on it compared with with 30 0r 32 GB!

  How can I get the D drive and do what is now drive C? Alternatively, I can change somehow D drive where all downloads to go and work from there anyway? I don't know how to change where a download will. Can someone please help me out here because I'm way behind with work; cannot afford professional maintenance COMP.; and have no idea what to do.

  Hello

  You may need to back up important data on the computer and and then format the D; drive to remove all the installation files and creates the disk space.

  Also I suggest you perform a disk cleanup on the computer. To get the procedure you can refer: Description of the tool in Windows XP Disk Cleanup: http://support.microsoft.com/kb/310312

  And uninstall unwanted computer programs, see: remove programs you don't need more: http://www.microsoft.com/windowsxp/using/setup/maintain/removeprog.mspx

• c: drive has 10% free space d: has 99% free, how to transfer programs from c to d?

  How to transfer programs from c to d?

  Hello

  Have you tried to clean the junk files that are normally found on your c: drive? To clear the temporary files click Start-> run, type & -> % temp %-> click ok. Delete all files in the temp folder.

  Also to recover space on the partrition, you need to run Disk Cleanup and compress old files. See also http://support.microsoft.com/kb/956324.

  To start disk cleanup, open my computer-> click drive c :->, right click Properties-> you get a tab for disk cleanup.

  If you do not plan to uninstall the service pack you can try to remove the $NtUninstall in the windows folder.

  Note that the folder is marked as hidden, so to see it, you must have configured Explorer to show hidden files/folders.

  You can also (for the record of $ $NtServicePackUninstall): If you want to keep these files to uninstall later goal you can make a backup of the folder to a CD for example and replace when uninstalling.

  You can also try disabling the system restore and disable hibernation (Hibernate mode writes an image of what you are currently working on a special folder on your hard disk and then shuts down your computer almost completely). To turn off Hibernation: click Start-> Control Panel-> Performance and Maintenance->, click Power Options.

  If you want to move the files to program from C to D, the best way is to uninstall and custom install applications on the D drive.

  I hope this helps.

• Received a message that my D drive has insufficient disk space.

  Recovery partition

  The D drive keeps saying: low disk space, I'm afraid to remove anything

  If drive D: (partition) is actually your recovery partition, then you can be a victim of a negligent design of Norton 360.

  See if the discussion here applies to you (read all of)--> http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/my-xp-laptop-keeps-sending-low-disc-space-on-my-d/3de2d4f3-d612-4976-813d-347039c8f2e0

• HP ENVY 15 Notebook PC: Intel HD 4600 graphics driver has stopped responding and recovered after upgrade Windows 10 1511

  16/11/2015 Microsoft installed automatically 'upgrade of 1511' on my Windows laptop, 10.

  (This laptop has been previously successfully upgraded to window 8.1 for Windows 10 in August.)

  After the upgrade of 1511, I started to receive the following error while playing at Microsoft games:

  "Display driver stopped responding and has recovered - Display driver Intel HD Graphics driver for Windows 8 (R) stopped responding and has recovered."

  According to Device Manager, installed upgrading driver 10.18.15.4256 dated dated 15/07/2015.  I did a restore to 10.18.15.4248 as dated 29/06/2015.  This has not solved the problem.

  I checked HP Support Assistant and apply labeled sp72370 10.18.15.4248 Rev c dated 05/08/2015.  This has not solved the problem.

  I am committed service HP Smart friend and they are reapplied 10.18.15.4248 via Device Manager web search pilot.  It has installed Intel Driver Update Utility 2.2, but the newer driver has not been installed because of "driver installed by manfacturer (HP).

  HP support person recommended restore new to restore point before Microsoft «upgrade» 1511   I was not comfortable doing so, as 'upgrade' was an important update from Microsoft by using the same process as the initial migration of Windows 8.1 to Windows 10.  The customer can no longer control the timing of updates and upgrades are cumulative - is no longer able to choose specific updates.

  For now I'm wrong to live with this error condition, as seems to have an impact on games and not other normal operations.  My laptop there one provided by HP NVIDIA Geforce GT 740 M, which is Windows compliant 10 and seems to operate normally.  Some of my apps choose the Intel driver, and others choose the NVIDIA driver.  I don't know how applications choose which one to use.

  What a problem like this to be resolved when Microsoft control completely the update mechanism and HP doesn't seem to update drivers available via the HP Support on a basis common?

  I've disabled the Intel HD graphics driver and used the NVIDIA graphics driver for the game.  No problem.

  Disabling the driver Intel resulted in the reving fan at a higher speed intermittently.

  Support for HP Smart friend assured me that the behavior of higher fan speed would not result in problems with premature failure on the road.  You agree?

  They said that my choice was to keep the disabled Intel HD graphics driver and use the NVIDIA only, or living the problem until HP one releases pilot newest Intel - it affects only game, all other functions seem normal.

• I have Windows Vista - I'm a msge saying that the recovery disc (D) is almost full. How can I transer to OS (C) Disk that has plenty of room to the left?

  I have Windows Vista.  I'm a msge saying that the recovery disc (D) is almost full.

  How can I transfer to OS (C) Disk that has plenty of room?    Thank you.

  Hello

  I'm sorry, but you cannot move the D: Partition recovery or its contents; It will not work if you do.

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. If you want to reinstall Windows from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

• I want to use a flash drive for backup, BUT I want a full backup of the entire drive.

  I had once an external drive for backup.  It was supposed to be a backup that would replace everything and put it back where it was.  I cheated because when I got to use it I found that it would reinstall was certain documents and photos.  None of my downloads and all the update programs has been lost. I wanted a mirror image!

  Now, I think a full image on a flash drive would be the way to go, but I don't know what software to use.

  I need help from someone who has this software and a USB flash drive.  Thank you

  Hello

  1/10 1.5 TB = 150 GB - buy a 150 GB flash drive (if you could find it on the market today) could cost you an arm and a leg. Buy a 1 to external portable HARD drive can cost you a little more $ 100.

  I hope this helps.

• My hard drive has been corrupted and I had to format and reload windows 7. It has worked OK for 6 weeks, but now says it is a counterfeit copy

  My hard drive has been corrupted and I had to format and reload windows 7. It worked OK for 6 weeks, but now says it is a counterfeit copy. I used the original product key, when I rebooted it. Ideas?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

  How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

  See this support article:
  
  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• My apple tv has been full screen but suddenly black bars apears on the side, how can I get full screen again?

  My apple tv has been full screen but suddenly black bars apears on the side, how can I get full screen again?

  Post a picture of your screen and the model number and brand of your TV.  Sounds like a TV problem.

• Need help, get message display driver has stopped working, but has recovered

  Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

  Hello

  1. what operating system do you use?
  2. What is the brand and model of your system?
  3. Once you get this error message?
  4. you did it before the issue of any material changes or software?

  Try the steps outlined in the methods mentioned below and let us know if it helps.
  Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

  Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

  Step 1: Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Clean boot in XP:

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Step 2: Turn off the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3: update the driver for
  

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

  Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

  To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

  Use the Group Policy settings:
  To resolve this issue by using Group Policy settings, follow these steps:

  (a) click Start, type gpedit.msc in the search box and press ENTER.

  (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

  (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  Use the powercfg command:
  To resolve this issue by using the powercfg command, follow these steps:

  (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

  (b) at the command prompt, type the following commands:
  powercfg - X-monitor-timeout-ac 0
  powercfg - X-monitor-timeout-dc 0

  Get back to us if the problem persists.

• I want to format my computer and reinstall XP, but my drive has upgrade on it that I can install XP with it?

  I want to format my computer and reinstall XP, but my drive has upgrade on it I can install XP from scratch with it?

  Unfortunately, no.

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• "display driver has stoped working, but was recovered" and then shuts down the system. "

  I have a problem with the opening of my yahoo email because my computer just Bonnac outside and flashes once or twice and says "display driver has stoped working, but was recovered" then shuts down the system. " Itsriving crazy me :(     (I have windows vista & pentium bicoeur.)

  This means that there is a problem with your graphics card. I suggest that to update your Windows and check of course latest service pack installed. Also check Windows problem and Solution Center and see if everything suggested installation listed there. It can make it appear to update your graphic card.

  If this isn't the case, try looking in the card of your gaphic provider or your PC support Web site to update its driver.