Full screen does not work when watching video clips of type 'tube '.

Similar Questions

• mode full screen does not work when playing games, recently ive changed my os from vista to windows 7... Please help me

  Im having dell inspiron 1545 graphics Mobile Intel (r) express chipset family... I changed my os from vista to windows 7 32 bit... after the mode full screen does not work just playing games... a black bar is the view of both sides of the window... can help a whole... ???

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Download the latest driver adapter disaplay from the manufacturer's website, install on your computer and check the status of the issue.

  Inspiron 1545

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-1545

• Why my new macbook air does not freeze when watching videos on Youtube?

  I bought the Macbook Air a few weeks ago and all I have installed MS office and nothing else.

  The problem is when I watch videos on Youtube, the macbook freezes for more than 20 minutes. (I always have to stop it at this point or an earlier version so I don't know if the screen release after 20 minutes)

  So in this case once or twice a day since the day I bought the macbook and since it was put in place in the store, I think that there is no problem with the installer.

  I bought it with the macbook from my sister who is of the same model and same cpu, ram etc and the same thing happened to my sister, but her macbook stopped doing this after a few days.

  Can someone give me some solutions to this problem?

  The problem may be caused by a bug in OS X, triggered by "Flash Player."

  If Flash is installed and that you did not already, please update to the latest version by opening the Flash Player pane in system preferences and selecting the updates tab.

  If Flash is already up to date, or if the update does not resolve the problem, open Safari preferences window and select the Security tab uncheck the box marked

  Enable Plug-ins

  See if there is an improvement.

  You can watch videos on YouTube and other sites without using Flash by installing the extension "ClickToFlash" or "ClickToPlugin' Safari. This isn't an endorsement. You should always do your own research to determine the safety and effectiveness of any third-party software before using it.

• Full screen does not work after upgrade; OSX hangs

  Immediately after the upgrade later El Capitan in Sierra, full function display has stopped working at the end of a disastrous. Not only can I not enter or exit the mode full screen on any application (Safari, iBooks, Terminal, etc.), but in addition, I can't event begin any application which was mode full screen before upgrade (essentially all other applications that I use on my mac). Nor can I drag-finger-three to any application full screen. OSX just hangs and displays the login screen as it has not started.

  Indeed, my mac is useless now, I can't do anything with it. I tried to restart the PRAM, has tried to repair my disk, tried various 'normal' things, which none worked. Can someone help me with this?

  Hello konkere,.
  Thank you for using communities of Apple Support.

  If I understand your message that after upgrade to macOS Sierra as your MacBook Pro doesn't work well for you. I know how it is important for your MacBook Pro to be in place and functional after the software update. Reset the PRAM and repair the disk are key steps in troubleshooting. I also recommend reinstall macOS Sierra of OS X Recovery.

  How to reinstall OS X
  

  OS X can be installed on the same version or an earlier version of Mac OS X, without deleting your data. You don't need to remove or disable the existing system first.

  1. Start of OS X Recovery now command-r immediately after start-up or that you restart your Mac. Release the keys when you see the Apple logo. Start-up is finished when you see the OS X Utilities window.
  2. If you do not want to wipe your drive before reinstalling OS X, open utility disk in OS X Utilities window, then use disk utility to erase the drive. Quit disk utility when done.
     Erase the disc is not necessary unless you're your Mac transfer to a new owner, partitioning your drive for use with Boot Camp, or attempt to solve a problem this as disk utility can't repair.
  3. Choose to reinstall OS X OS X Utilities window, and then follow the instructions on the screen.
     This installs the latest version of Mac OS X, which has already been installed on your Mac.

  Best regards.

• Toshiba Journ.e Touch - full screen does not work

  I have two questions. :)

  1. when I play ANY video, it won't go full screen. I couldn't find the way to do it. Player default it runs successfully, after a few seconds the command for the game, break etc goes, there is only one image on the left, but he won't go full screen. And there is no button for this.

  2. I've seen in the official presentation of this product that there is a facebook application in store, but he's not here. In the store, I can download only 10-15 applications. Is that all, or there is another way, how can I get more applications? More importantly from facebook. :)

  Thank you vary much. :)

  All the best,
  Jovana

  > 2. I saw in the presentation of this product, there is a facebook application in store, but he's not here. In the store, I can download only 10-15 applications. Is that all, or there is another way, how can I get more applications? More importantly from facebook

  AFAIK the Journ.E touch run the Windows CE 6.0 system and facebook app isn't available for these OS.

  > 1. When I play ANY video, it won't go full screen. I couldn't find the way to do it. Player default it runs successfully, after a few seconds the command for the game, break etc goes, there is only one image on the left, but he won't go full screen. And there is no button for this.

  Journ.E touch supported video format: avi, 3GP, FLV, Mpeg4. H.264, WMV
  The Tablet has a touchscreen of 800 x 480 pixels and can display 1080 p video scaling on this display or pump out at full resolution to an external monitor via HDMI port

• splash screen does not work when Self contains the .jar

  I use a function of the start screen for the appliction of javafx. I use the javafx ant task to run in the order, the fx:jar, the fx:signjar, the fx: deploy to produce the jar file, the jnlp, the HTML file and the nativeBundles including 'image' and 'exe '. The splash works well when they are packed in the .jar file by double-click.

  When I double-click on the exe file in the application image file or the shortcut after installation by running the installation .exe file, however, there is no splash screen. Why? The exe file does not have to based on the jar file? Thanks for help.

  The jar is produced by < fx:jar=""> . stand-alone file is produced by with inno installed on Win7. The generated jar has the start-up screen, double-click, but not .exe. Why? or something else has to do with the generation of a stand-alone application? I guessed that the .exe file runs based on the jar file it should have the boot too. Thanks for the reply ~ ~

• VIMEO WIDGET DOES NOT WORK WHEN DISPLAYING VIDEO IN LANDSCAPE MODE WHICH JUMPS TO THE NEXT BREAKPOINT.

  Hello I had a lot of problems to make Vimeo to work with Responsories between my fluid breakpoints - I have defined it 360, 768, 1024 and 1020 breakpoints. What is happening is when using built in widget Vimeo muse and adjust the widget between breakpoints and then download the site, the widget allows to be played when the phone is held in normal use portrait video. When I'm on my iPhone 6 more, for example, the site load very well with the breakpoint 414. The fines of the video is played. However, then I tilt the phone in landscape mode, the video stops and breaks site for the next breakpoint. I managed to get one or two videos work very well on my site, but others have the same problem above.

  On the page below the first video works very well--you can tilt the phone in landscape mode and it continues to play as usual - on the other two videos - it doesn't - the video stops / site goes to the next breakpoint 768.

  http://www.dubaicorereviewapp.com/guests.html

  What I can not understand, that is why the first video work and not the other two. I tried to create pages with scaled down the content to see if I can get the video to work right and it doesn't. This used to be an issue with Muse before the new version of reagent. Because my site has lots of one type of the members of videos I need to find a way to deal with this issue? all suggestions/guidelines would be appreciated. I did the widget extend to the width of the browser in each of the stitches if that helps.

  
  

  WORKS WITH THIS VIDEO
  

  
  

  
  

  
  

  BUT NOT WITH THIS
  

  
  

  

  
  

  
  

  UPDATE!

  
  

  OK made some progress on this issue - but its not the solution I want - I think that what is happening is when you use the widget to say about 1200 downtime and scale down to each of the lower stop points - you this question - BUT if you copy the widget into the offending breakpoint and hide the original widget and then paste the widget of the memory - so it works very well in this breakpoint - I suspect that there is a bug with the widget / Muse because it works when the SAME scale inserted widget between breakpoints and will work if you paste a widget FRESH in the offending breakpoint - this should be fixed!

  Hi cheeky71,

  This is certainly a bug with Muse and we hope that it be corrected in a future release. I'm glad to hear that you have found a workaround for now.

  Anna

• Play games - mode full screen does not work yet

  Hi, I have the latest version of Workstation 6.5 running on Win XP 64. I have 3D graphics enabled under settings in my computer, but when I choose to play games full screen, be they always appear the same size as a windowed mode. Is there another setting I have to change somewhere or full screen just is not possible at this time of development?

  Thank you!

  * Mani

  Go in Edition > Preferences > display, and you can choose to have the virtual machine screen stretch to fill the home screen.

  Or, if you want your resolution of the host to change to fit the resolution of the virtual machine, when you enter full screen mode, click the icon in the toolbar of VMware Workstation, then select exclusive Mode.

• W510 screen saver does not work when playing video, normal?

  Hi everyone, I have found that my W510 (windows 7 Ultimate X 64) can not activate the screen saver when I play video.

  I think it's reasonable, but I don't know if this is normal.

  Where and how can I customize it?

  See you soon!

  Since you don't mention what mediaplayer you use, I guess it's Windows Media player. WMA under 'Tools-> Options-> Player', you can find the setting "allow screensaver during playback. If you enable this setting, the screensaver should work during playback of the video. If you use another media player please let us know what mediaplayer that may be.

  -gan

• WebRTC does not work when the video or the sound is not present

  We are a website with WebRTC that uses rooms for people to talk to each other. We want this service to be available for people who have only mic and sound or for some reason some don't want to share video (or audio). We use the EasyRTC (www.easyrtc.com) framework.

  With Firefox, we encounter some problems. Firefox connects when someone has only video or audio, are all in the room (we have a text chat that works), but users Firefox cannot hear or see the person who shares only its or images. If the single user sharing audio or video using Chrome, this user can hear or see the Firefox user (!). We confirmed it on our own site, the tawk.com and the appear.in.

  This may already be known to mozilla:

  https://groups.Google.com/Forum/#! Searchin'/easyrtc/firefox/easyrtc/prYy4VeJV8I/wbUi7Ze2GmkJ

  It seems that more and more websites using WebRTC pop up (tawk.com, appear.in, vline.com , to name a few). Would be a shame if people couldn't use Firefox for these purposes...

  I hope to see this problem soon! Or maybe there's some kind of workaround?

  I am answering my own question as I mentioned in this bug report.

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=881236

• I've deleted direct 3d 9 Windows xp. Now my screen does not work when running windows

  What should I do

  You can try this link for help.

  http://support.Microsoft.com/kb/191660

  Also, maybe try to open xp mode without failure, then reinstall

• Full screen does not not in Flash video after downloading

  When I import a video to my Adobe Flash CS4 and choose to add a button the button fullscreen full screen does not work. I chose "output load video with playback component" parameter and import my flv. Volume, pause and play all the work but not the button fullscreen. The button fullscreen works when I open the file in my flash player on my pc. Here is an example on this test page: http://poeticmotionmachine.com/default3.asp

  Thank you

  Toby

  You must add

  and

  allowFullScreen = "true" - in the embed tag

• Touch screen does not work after Windows 8.1 upgading

  I upgraded my HP TouchSmart tm2 notebook Windows 8 tot Windows 8.1. Now my touch screen does not work, when I touch an app. Also my touchpad do not work. There is no problem when I we an external monitor (without touch screen). I received a message that Assistant HP app is not compatible with Windows 8.1. How to solve this problem?

  Unfortunately, there is no support for the applications of the touchscreen or devices to your laptop under Windows 8 or 8.1

  operating systems.

  This is the touchpad for Windows 7 software

  You can try to install mode of compatibility in this solution provided by Member AttackofZaq

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• screen saver does not work when magic jack is pluged in. unplug mj it works

  screen saver does not work when magic jack is pluged in. unplug taking magic, the screensaver works properly.

  09/05/10 the MagicJack has released an update that prevents the screen saver and "standby" mode. They are aware that people are upset on this issue, but they seem not to care.

  Here is a simple solution to the problem. I've used it since 10/09/10 and it works perfectly.

  Restore the functionality of screen saver / display after MagicJack diverted these features...

  Click on the Start button in Windows 7

  type cmd in the search box

  Right click on cmd and run as administrator if you are not running as an administrator it will not work!

  type: powercfg /requestsoverride PROCESS magicJack.exe DISPLAY

  Make sure that you type the capitol letters and lowercase no look of magic make 'J' ack it's capitol as well!

  Press enter

  Now unplug your magicjack

  Restart your computer and let the unplugged MagicJack

  Once the computer starts together your screensaver for a minute then let it sit for a minute activate screen saver...

  Now plug your magic let sit for one minute Alto screen saver is now active!

  If you want to activate the sleep as well, follow the same instructions as above, but simply type this line instead.

  type: powercfg /requestsoverride PROCESS magicJack.exe DISPLAY SYSTEM
  
  If you follow these instructions, your sleep/screen mode will work as before.

  Kind regards
  ZzyzxDude