Full screen for videos doesn't work is not for the Satellite L355-S7812

Similar Questions

• Bluetooth doesn't work is not on the Satellite a series

  I reinstalled my OS (Vista Home) using available with the laptop recovery CD. Now when I turn on the bluetooth button, and then click Power On to ConfigFree it does not work. The message that appears is:

  + The follwing point switch No. +
  + Devices +.

  It is said in the Details button

  + The following may be the cause of the failure. +

  + Wireless LAN utility is active (Please close the utility).
  + Property windos network is open (Please close the window).
  + Opetion Internet windos is open (Please close the options window).

  + Where there is always a problem, pleae close all other applications and then run ConfigFree. +

  Please guide me as I could not work with my bluetooth.

  Thanking you in advance

  Hi mate,

  I recommend you to download each pilot stuff Bluetooth available from the drivers download page and reinstall the drivers, in addition, it would certainly be a good idea to reinstall the following things:

  -Configfree
  -Utility (Value Added Package)
  -WLAN driver

  Welcome them

• Full screen for the entire work area (not 1 module)

  Hi guys,.

  Is it possible to activate the mode full-screen for the work in first Pro CC, as well as Shift + F area how for Lightroom? Tilde and ctrl + tilde does full-screen for the selected module. I want just the complete workspace in sight.

  CTRL + \.

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• HP Pavilion: Touchscreen doesn't work is not in the browser

  My touch screen stopped working specifically in Chrome.  It seems to work everywhere else, including IE.  It's probably a frame in Chrome or something on the computer settings I managed to accidentally change?  Thank you!

  Hi there @jexylou,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the chrome browser works only not with the touch screen. I'll be happy to help you.

  Open chrome

  Put this in the address bar: chrome://flags/#touch-events

  Change the setting "enable Touch events" "Automatic" to "Enable"

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• USB doesn't work is not on the external hard drive

  I have Vista Ultimate and here I noticed recently USB not working only not on the external hard drive. I tried to update the drivers and the system responds with the most recent driver already installed. Verified the USB ROOT property and shows nothing when it comes to th Ext. HD but it sees the usb hub and head phones. An organization can help its driving me crazy!

  Hi Chaser07,

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you try to use an external hard drive on another USB plug and check if it works.

  Method 2:

  Automatically diagnose and repair problems with the devices when the Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.

  Click run now in the link below to diagnose and fix problems automatically.

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems

  Check whether the problem is resolved.

  Method 3:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Check whether the problem is resolved.

  Method 4:

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Multimedia keys not working only not on the Satellite A200 - 14 d

  Hello!

  I have problem with my multimedia keys. They don't work after installing WXP and all drivers. Only key work is WWW browser. I wanted to put DVD/CD key to start winamp, but it is impossible. I can put this control controls and panel\Toshiba, but it still doesn't work. Also in the case of default CD/DVD settings key does nothing.

  I tried also to play, stop, next and prev keys in winamp hotkeys (options\preferences\global hotkeys winamp), but I can put only 1 key. When I am pressing the play button in the shortcut field keyboard winamp, it says "0 x 1770001", but after I save it turns into '0 x 1000000 '. Also when I am pressing the Stop button, it says 'E', and after save it also evolves into '0 x 1000000 '. And analog: prev button - '0 x 1740001', by pressing the next key - ""(only space), but after save this settings it also evolves into '0 x 1000000'. "."

  So only the first shortcut key works - for all the multimedia keys. Can you give me some tips to solve this problem?
  PS. [Sorry for my English:]

  Hello

  All the multimedia keys are designed to work with Microsoft Media Player and not for use with other media players. Install a few plugins for Winamp. Please see this section on Winamp on Toshiba laptops.

  Good bye

• Broadcasting in full screen for the FLVPlayback control

  Hi all
  
  I am facing a weird problem while using the FLVPlayback control.
  I created a class that internally creates an instance of the FLVPlayback control and affect the skin SkinOverPlayStopSeekFullVol.swf.
  In the main program, I created n instances of this class load different flv files [just like any application windowed multi, with each window playing his own flv file].
  Once I click on the button full screen the video loaded last always get mode full screen; regardless of the FLVPlayback instance where I'm clicking.
  

  Hi guys,.

  This question is answered on live docs please see the answer to my comment by madscribe [January 30, 2009 at 11:15] to the following location

  http://livedocs.Adobe.com/Flash/9.0/ActionScriptLangRefV3/index.html?FL/video/FLVPlayback. HTML&FL/video/class-list.html

• If doesn't work is not inside the loop for the registration of the declaration file?

  Hello!

  I have the following documents open in Photoshop:

  123456_mrp_ou. TIF

  869548_mrp_ou. TIF

  896589_mrp_in. TIF

  896589_mrp_ou. TIF

  .. and I have this if statement in a loop for to search for files with a specific 'pid' number and save them in the folder My Documents:

  var originalPid = 896589
  for(i = 0; i < app.documents.length ; i ++) {
        activeDocument = app.documents[i]
          if(activeDocument.name.substring(0,6) === originalPid) {
                  var standardSave = new File('/Users/constantincerdan/Documents/' + activeDocument.name)
                  activeDocument.saveAs(standardSave, TiffSaveOptions, false, Extension.LOWERCASE)
  }
  }
  
  
  

  It did not find the two files and save them when I run. However, the loop without if statement runs very well and saves all the documents in the Documents folder:

  var originalPid = 896589
  for(i = 0; i < app.documents.length ; i ++) {
        activeDocument = app.documents[i]
                  var standardSave = new File('/Users/constantincerdan/Documents/' + activeDocument.name)
                  activeDocument.saveAs(standardSave, TiffSaveOptions, false, Extension.LOWERCASE)
  }
  
  
  

  How it works with an if statement so that it saves only the two?

  Any help is very appreciated!

  You are comparing apples to oranges, you need to compare strings.

  originalPid = 896589;

  alert (typeof originalPid);

• In the new window of the tab, I get a full screen of a site, and I do not see the gear of NEW CONTROLS TAB

  In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
  I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
  I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
  I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciated

  What do you see on the page, just nothing?

  Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit

  If you open a new tab, which solve this problem?

  Edit: sorry for typo's fault: browser.newtab.url

• FN key doesn't work is not Windows XP - Satellite L305-S5885

  Hello, I recently downgraded my Toshiba Satellite L305 S5885 from Vista to Windows XP. Everything works well except the function (Fn) keys to control the screen brightness, volume. Some function as mute but most do nothing when I try to use them. All the installed drivers although Device Manager shows errors or lack nothing.

  I tried to install all the drivers for the keyboard, the Fn keys, keyboard shortcuts, and still I can't work at all. Someone was able to get these keys to run after the installation of WinXP or you know what drivers/software I'm missing? These keys can be used in XP or they work only in Vista?

  Thank you.

  This feature has nothing to do with the operating system or Device Manager. FN keys feature Toshiba use for years and in my opinion, it will be used in the future also.

  As I see you probably have US laptop model. I put t know how he works in the United States, but here in Europe Toshiba offered special WXP BIOS update. After installing this BIOS the FN keys work correctly.

  In order to check it please US Toshiba support site under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp to see what is available for Windows XP Home edition. I also recommend you check the section ask Iris. Maybe you can find useful newsletters.

  One last thing: under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 you will find the forum we Toshiba. There, I hope that you will find answer to your question.

  Good luck and please let us know if you set up Windows XP Home edition successfully.

• HP officejet 6500 has more: press the button doesn't work is not on the right side

  Hi I tried to turn on my printer and it is stuck on maintenance mode and will not work my right from the touch pad is there a replacement for the touchpad or a way around the mainenance mode?

  Hello @jgrier1,

  Welcome to the forums of HP.

  I understand that your printer is stuck on maintenance mode and the touchpad is not responding.

  I would like to help.

  I'm sorry, but the display on the Officejet 6500 has more, is not a replaceable part by the user.

  Try to go through the document next to the touch screen.

  It also can you go beyond the question of maintenance mode.

  The touch screen is unresponsive

• Option of 'Options' of the Smartphones from blackBerry in the BB Menu button doesn't work is not on the Torch 9800

  Whenever I select 'Options' from the drop of the BB Menu button on my Torch 9800, the screen flashes, then back to my home screen. It has been so for a long time (almost a year) and I think that there is a permission that has been disabled inadverdently. It does work if I use the theme BB6 native or other that I downloaded. Anyone know how to make 'Options' to the option to start working again?

  Hi randynjaimie,

  Try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software.

  For more information, see the following article. How to perform a clean reload of the BlackBerry Device Software for Windows. www.BlackBerry.com/BTSC/kb11320
  Please test to make sure that the problem has been resolved before restoring all the data from your backup file.

  I hope this helps.

• RA VPN doesn't work is not on the second external interface

  I've temporarily came from two Internet service providers in our ASA 5510.  Which works very well.  I tried to configure the VPN to our second outside interface (outside-XO) and who does not.  The first/original VPN works great.  Can someone look at the config and tell me if I did something wrong.  It is not a customer number, because it is able to connect fine on the first interface.  Thank you.

  ASA Version 7.1 (2)
  !
  hostname FW01
  dot.com domain name
  activate the password * encrypted
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  IP address *.229.200 255.255.255.192
  !
  interface Ethernet0/1
  Speed 100
  full duplex
  nameif inside
  security-level 100
  IP 192.168.2.3 address 255.255.255.0
  !
  interface Ethernet0/2
  nameif outside-XO
  security-level 0
  IP address *.157.100 255.255.255.192
  !
  interface Management0/0
  nameif management
  security-level 100
  IP 192.168.14.254 255.255.255.0
  management only
  !
  passwd * encrypted
  banner login attention is a private network. Unauthorized intruders will BE prosecuted to the extent of the ACT!
  boot system Disk0: / asa712 - k8.bin
  passive FTP mode
  clock timezone PST - 8
  clock summer-time recurring PDT 2 Sun Mar 2:00 1 Sun Nov 02:00
  DNS server-group DefaultDNS
  dot.com domain name
  permit same-security-traffic intra-interface
  object-group service tcp Server
  HTTPS and www description
  EQ object of the https port
  port-object eq www
  object-group service tcp Mail
  SMTP POP3 access description
  EQ Port pop3 object
  EQ smtp port object
  port-object eq 32000
  non-standard tcp service object-group
  Port Description 1429 and 1431
  port-object eq 1431
  port-object eq 1429
  object-group service DNS tcp - udp
  Description to allow outside DNS resolution
  area of port-object eq
  object-group service FTP tcp
  FTP description
  port-object eq ftp
  SMTPMail tcp service object-group
  Description SMTP only access
  EQ smtp port object
  IQWebServer tcp service object-group
  Www and port 8082 description access
  port-object eq www
  EQ object Port 8082
  EQ object of the https port
  port-object eq 8999
  SFTP tcp service object-group
  Description SFTP_SSH
  EQ port ssh object
  outside_access_in list extended access permit tcp any host *. *.229.201 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.229.202 object-group Mail
  outside_access_in list extended access permit tcp any host *. *.229.202 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.229.202 object-group DNS
  outside_access_in list extended access permit tcp any host *. *.229.203 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.229.204 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.229.205 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.229.208 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.101 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.102 object-group Mail
  outside_access_in list extended access permit tcp any host *. *.157.102 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.102 object-group DNS
  outside_access_in list extended access permit tcp any host *. *.157.103 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.157.104 - a group of Web server objects
  outside_access_in list extended access permit tcp any host *. *.157.105 - group of non-standard items
  outside_access_in list extended access permit tcp any host *. *.157.108 - a group of Web server objects
  access-list 150 extended permit tcp any any eq smtp
  access-list sheep extended ip 192.168.0.0 allow 255.255.0.0 10.1.1.0 255.255.255.0
  access-list sheep extended permits all ip 10.1.1.0 255.255.255.240
  Splt_tnl list standard access allowed 192.168.0.0 255.255.0.0
  Splt_tnl list standard access allowed 10.1.1.0 255.255.255.0
  access-list extended webcap permit tcp any host *. * eq.164.210 smtp
  access-list extended webcap permit tcp host * smtp eq.164.210 all
  pager lines 24
  Enable logging
  logging asdm-buffer-size 200
  buffered logging critical
  exploitation forest asdm errors
  Outside 1500 MTU
  Within 1500 MTU
  management of MTU 1500
  outside-XO MTU 1500
  mask 10.1.1.1 - 10.1.1.15 255.255.255.0 IP local pool VPNpool
  mask 192.168.14.244 - 192.168.14.253 255.255.255.0 IP local pool VPNCisco
  ICMP allow any inside
  ASDM image disk0: / asdm512.bin
  enable ASDM history
  ARP timeout 14400
  Global (outside) 1 *. *.229.194
  Global (outside-XO) 1 *. *. 157.66
  NAT (inside) 0 access-list sheep
  NAT (inside) 1 192.168.0.0 255.255.0.0
  public static tcp (indoor, outdoor) * domaine.229.202 192.168.14.166 netmask 255.255.255.255 area
  public static tcp (indoor, outdoor) *.229.202 www 192.168.14.2 www netmask 255.255.255.255
  public static tcp (indoor, outdoor) *.229.202 smtp smtp 192.168.14.2 mask 255.255.255.255 subnet
  public static tcp (indoor, outdoor) *.229.202 192.168.14.2 pop3 pop3 netmask 255.255.255.255
  public static tcp (indoor, outdoor) *.229.202 32000 192.168.14.2 32000 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.6.229.203 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.28.229.204 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.205.229.205 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.29.229.208 netmask 255.255.255.255
  static (inside, outside) *. * 192.168.14.3.229.201 netmask 255.255.255.255
  TCP static (inside, outside-XO) *. * domaine.157.102 192.168.14.166 netmask 255.255.255.255 area
  TCP static (inside, outside-XO) *. *.157.102 www 192.168.14.2 www netmask 255.255.255.255
  TCP static (inside, outside-XO) *. *.157.102 smtp smtp 192.168.14.2 mask 255.255.255.255 subnet
  TCP static (inside, outside-XO) *. *.157.102 192.168.14.2 pop3 pop3 netmask 255.255.255.255
  TCP static (inside, outside-XO) *. *.157.102 32000 192.168.14.2 32000 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.3.157.101 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.6.157.103 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.28.157.104 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.205.157.105 netmask 255.255.255.255
  static (inside, outside-XO) *. * 192.168.14.29.157.108 netmask 255.255.255.255
  Access-group outside_access_in in interface outside
  Access-group outside_access_in in interface outside-XO
  Route outside 0.0.0.0 0.0.0.0 *. * 1.229.193
  Route inside 192.168.0.0 255.255.0.0 192.168.2.1 1
  Route outside-XO 0.0.0.0 0.0.0.0 *. * 2.157.65
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
  Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
  Timeout, uauth 0:05:00 absolute
  attributes of Group Policy DfltGrpPolicy
  No banner
  WINS server no
  DNS server no
  DHCP-network-scope no
  VPN-access-hour no
  VPN - connections 3
  VPN-idle-timeout 480
  VPN-session-timeout no
  VPN-filter no
  Protocol-tunnel-VPN IPSec
  disable the password-storage
  disable the IP-comp
  Re-xauth disable
  Group-lock no
  disable the PFS
  IPSec-udp disable
  IPSec-udp-port 10000
  Split-tunnel-policy tunnelall
  Split-tunnel-network-list no
  by default no
  Split-dns no
  disable secure authentication unit
  disable authentication of the user
  user-authentication-idle-timeout 30
  disable the IP-phone-bypass
  disable the leap-bypass
  disable the NEM
  Dungeon-client-config backup servers
  the firewall client no
  rule of access-client-none
  WebVPN
  url-entry functions
  HTML-content-filter none
  Home page no
  4 Keep-alive-ignore
  gzip http-comp
  no filter
  list of URLS no
  value of customization DfltCustomization
  port - forward, no
  port-forward-name value access to applications
  SSO-Server no
  value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information
  SVC no
  SVC Dungeon-Installer installed
  SVC keepalive no
  generate a new key SVC time no
  method to generate a new key of SVC no
  client of dpd-interval SVC no
  dpd-interval SVC bridge no
  deflate compression of SVC
  Cisco strategy of Group internal
  Cisco group policy attributes
  value of server WINS 192.168.14.4 192.168.14.11
  value of 192.168.14.4 DNS server 192.168.14.11
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list Splt_tnl
  field default value *.com
  username * password * encrypted
  username * password * encrypted privilege 0
  username * password * encrypted
  username * password * encrypted
  username * password * encrypted
  username * password * encrypted privilege 15
  username * password * encrypted privilege 15
  the ssh LOCAL console AAA authentication
  Enable http server
  http 0.0.0.0 0.0.0.0 outdoors
  http 192.168.0.0 255.255.0.0 inside
  http 192.168.1.0 255.255.255.0 management
  http 192.168.14.0 255.255.255.0 management
  http 0.0.0.0 0.0.0.0 outside-XO
  SNMP-server host within the public 192.168.14.27 of the community
  location of the SNMP server *.
  contact SNMP Network Admin Server
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
  dynamic-map of crypto-XO_dyn_map 10 outside the value transform-set ESP-3DES-SHA
  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
  outside_map interface card crypto outside
  outside-XO_map 65535 ipsec-isakmp crypto map outside Dynamics-XO_dyn_map
  card crypto outside-XO_map interface outside-XO
  ISAKMP allows outside
  ISAKMP enable outside-XO
  part of pre authentication ISAKMP policy 10
  ISAKMP policy 10 3des encryption
  ISAKMP policy 10 sha hash
  10 2 ISAKMP policy group
  ISAKMP life duration strategy 10 86400
  ISAKMP nat-traversal 20
  IPSec-attributes tunnel-group DefaultL2LGroup
  ISAKMP keepalive retry threshold 600 10
  IPSec-attributes tunnel-group DefaultRAGroup
  ISAKMP keepalive retry threshold 600 10
  tunnel-group, type Cisco ipsec-ra
  attributes global-tunnel-group Cisco
  address pool VPNpool
  Group Policy - by default-Cisco
  tunnel-group Cisco ipsec-attributes
  pre-shared-key *.
  ISAKMP keepalive retry threshold 600 10
  Telnet 192.168.0.0 255.255.0.0 inside
  Telnet 192.168.14.109 255.255.255.255 inside
  Telnet 192.168.14.36 255.255.255.255 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 5
  Console timeout 10
  management-access inside
  dhcpd lease 3600
  dhcpd ping_timeout 50
  !
  INSPECT class-map
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  Policy-map global_policy
  class INSPECT
  inspect the dns
  inspect the http
  inspect the icmp
  inspect the tftp
  inspect the ftp
  inspect the h323 ras
  inspect h323 h225
  inspect the snmp
  inspect the sip
  inspect esmtp
  class inspection_default
  inspect the ftp
  !
  global service-policy global_policy
  TFTP server inside 192.168.14.21 TFTP-root /.
  192.168.14.2 SMTP server
  Cryptochecksum:5eedeb06395378ed1c308a70d253c1b6
  : end

  Hello

  Should work.

  What I think is the routes:

  Route outside 0.0.0.0 0.0.0.0 *. * 1.229.193
  Route outside-XO 0.0.0.0 0.0.0.0 *. * 2.157.65

  If the first interface is ok, the ASA does not go to route packets via the second interface, so VPN will be not through this interface.

  On the client, can you PING the two IPs outside of ASA or only the first?

  Try to add a static route on the SAA to secondary education outside interface pointing to the address of the customer and try to connect via VPN and see if it works.

  Orders:

  HS cry isa his

  HS cry ips its

  Will be a big help as well, when the VPN connection attempt failed.

  Federico.

• sort order doesn't work is not in the library module

  Hi, I shoot events with 2 different cameras, using a pool to the other and back dozens of times switching.  When I come home, I import the maps of two cameras in Lightroom. In the library module, the small previews on the bottom sort by chronological order of capture OF the CAMERA.  meaning that it shows all the photos sorted by capture of the camera one time and then all the photos, sorted by the time form camera capture 2.  I have many, many would prefer if the form of photos, both sorted cameras sort by ABSOLUTE capture time, not a single camera, then another.  In the library module, select view/sort/capture time but it just doesn't work.  any help?

  Thank you

  Triple - make sure that the camera clocks have been set at the same period.

  The best way to do that is to display the date of capture under the thumbnails mode grid library. In the library, view > Display Options and set the low label or the top of the Compact cell Extras to capture Date/time. Then set View > grid view Style > Compact cells.

  Then view > sort > time capture. Look closely at the date/time under thumbnails and pay attention to the AM/PM (if you are in a country with 12-hour formats).  The date/time by strictly ascending order?

  If they are not strictly ascending, thanks for posting a screenshot of high resolution of your entire window of LR showing the problem.