Full video cropped width and height appears in the output window

Similar Questions

• website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, this i

  website valid W3C, initially no error reported by the developer toolbar. But by right clicking (giving the menu validation), the toolbar reports two errors: width and height. Despite the fact that each page is posted! The forum for the toolbar, it's supposed to be a browser error. So, how can it be fixed? I use FF 3.6.6

  This has happened

  Each time Firefox opened

  is after upgrade to 3.5?

  http://chrispederick.com/forums/viewtopic.php?PID=8239#p8239

  You create a new profile and install only the extension Web Developer, as recommended Chris?

• Open a new window, draw rectangles in the window and to communicate between the two windows

  I'm going to search for this, but thought I would jump start here in case someone can give me a link or point me in the right direction on how to do while I'm looking.  It is an area of Flex, I've not hit on yet.

  Basically, I need to have my flex (AIR Application) application opens a new window, allows the user to draw a rectangle in this new window and then move the info from the box (X and Y, Width and Height) return to the main window.

  I've never done any of this and I'll try to find out how, but if someone could point me here until I find it online, it would help a lot, kind of in a lack of time... Thank you.

  Sorry I think that I did not read the whole post.

  This loan: http://www.adobe.com/devnet/air/flex/quickstart/launching_windows.html

  This is an easy way to get a NativeWindow

  1. create a MXML component based on the window. (I think that the canvas is by default...)

  2. in your main application ( for example..) import the component in my case:

  import com.test.components.SendSMS;

  3. instantiate the component and open it in a new window:

  var mySender:SendSMS = new SendSMS();
  mySender.height = 500;
  mySender.width = 500;

  mySender.open ();

  That's all... with all honesty, im not much away from you in the knowledge of the AIR, but people have been warm here and helped me, so I want to give something back.

  I hope this helps.

  Alejandro

• Apex 5 display image field, control width and height on the form page

  Hello everyone,

  I try to display the image from a blob directly column on the page, it does not work well, here's my question, how can control the width and height of the screen image field, because its changing dynamically the size of the screen according to the original dimensions, I want to set the dimensions.

  Any help will be appreciated.

  Concerning

  Anil

  set the width and height attributes in the attributes of the image html elements

  for example Width = "200" height = "100".

• Solution overview of files! (Need width and height adding thought)

  I just so this code HTML that I can integrate in Muse who is-

  < input type = "file" accept = "" image / * "onchange =" loadFile (event) ">"

  < img id = "output" / >

  < script >

  loadFile var = {function (event)}

  reader of var = new FileReader();

  Reader.OnLoad = function() {}

  var output = document.getElementById ('output');

  output. SRC = reader.result;

  };

  reader.readAsDataURL(event.target.files[0]);

  };

  < /script >

  This code allows me to preview the files but how do I add what width and height, I want the file to be presented in preview at? Please help, thanks a lot!

  Please do not hesitate to post this encoder corners:

  https://forums.Adobe.com/community/coding-corner

  Thank you

  Sanjit

• Width and height (relative values of scene) in Actionscript 3D perspective

  Hello!

  I have a small square movieclip stage, 100 x 100 width and height.

  I translated it 90 ° in the y-axis. Then, it seems almost a vertical line.

  I want to know the "3D Perspective" width and '3D Perspective height' values (something like 24 x 120 as the square rotation now looks almost a vertical line).

  These values are shown in the movieclip properties, in ' 3D position and mode.

  I put an image showing where the values are displayed. Does anyone know how to access values through Actionscript?

  Thank you!

  

  I'm sure that kglad is right, but I think you can use the getBounds method too:

  trace (myClip.GetBounds (stage));

  gives you a Rectangle whose properties width and height corresponds to the width and height in the 3D properties panel.

• Scale the image to fit the width and height of the browser

  Hey, I'm looking to launch a new website for me and while I have been around the navigation to find inspiration, I came across an effect I want.

  I'm not sure what the right terminology is to define the search, but it's basically an image at 100% width and height scale until you scroll.

  Some examples are in the section "Site of the day";

  Ali-Pordeli

  Congress · Dogstudio

  Thank you

  Matt

  You can use the slide show full-width on the pages for the similar effect. Please see these videos for more details:

  https://helpx.Adobe.com/Muse/how-to/add-100-width-slideshow.html

  https://www.YouTube.com/watch?v=B-9zD-8Q0RM

  https://www.YouTube.com/watch?v=DHjDpxNusMw

  Thank you

  Sanjit

• How to change the width and height of the title?

  Program: First Pro CC

  Recently I create da title for my video. I noticed that when I had looked at the preview of the title and the video, the title is so blurry. My settings at first:

  

  How am I able to change the width and height parameters (to make the title more high definition) , without having to create another title in replacement from that Fuzzy? I don't ask if I have to create another title and insert it in the video, and then having to erase those blurry I had to replace. How are you able to change settings of the original title, without having to make a new title? Should I go to the 'Properties' tab when there is nothing at all (as in there is no option to change the w + h title quality) to change the current settings of the title?

  

• icons next to the width and height in the image property inspector

  Hello

  In

  Insert, change and manipulate images in your website using Dreamweaver

  Section "Set properties of the image", that means the icon that looks like unlock the average?

  I thought that it maintains the width-height ratio when it is locked. But it does not work.

  sulfateion wrote:

  I tried several times, but the lock seems does not work. When the image is inserted, lock the padlock. Then I can always arbitrarily change the proportions with the mouse by dragging the lower right of the image. Then the lock turned out be unlocked.

  Everything works exactly as expected. The lock maintains the aspect ratio only when you change the width or height value in the property inspector. It has no effect when you resize an image by dragging with the mouse. The padlock will appear unlocked as a Visual indicator that the aspect ratio has been broken.

  Hold down the SHIFT key when you drag an image to resize has always maintained the aspect ratio.

• How to get the Social/Vimeo widget for the width and height of the scale?

  I'm trying to get the Social/Vimeo widget proportion nationwide. For the moment, he played only in width but no height.

  Once it hits a specific breakpoint that is fine, but once you go beyond this breakpoint it does not keep the correct proportion and so on and so forth.

  I have 'Sensitive' width ' Resize' option, but ideally it should be 'sensitive width and height' but it is grayed out.

  Is there a solution?

  Drag the Central background of the video object up so the framework encompassing is very short and release. (While you do this the width of the object should not change, just the height.) Once you release Muse will take your browser redraw the video. It will then be abruptly to the proportions of the video (and probably push other things you will need to then back manually to the desired gap distance).

  What you did by dragging the shorter height and releasing was to set the minimum height for this object is very low. You should see a horizontal dotted line in the color of edges of framework that specifies the minimum height, you just put. Now that the video shrinks in width (and proportionately is shortened) the bounding box around it also will shorten (down to the minimum that you just put) and the following will be moving upwards to maintain the same distance from the gap of the video.

• How to resize an image using PIXELS to define the width and height?

  I need make my image a certain number of pixels wide and high.  When I resize image I can't change the area that shows the pixels of width and height, and when I drop down lists it does not give option pixels.  When I choose "points" and "Pica" they are obviously not other names for the pixels because the given number is not the number of pixels above.  I used to be able to do it EASILY in elements 2.0, my previous version of elements.  I am now using 8.0.

  In fact, I just realized that nothing that I in image resize will change the number of pixels at ALL in question.  Size and pixel per inch are locked permanently in relationship to each other.  I had to download a new version not long because my computer hard drive has failed, and I think they changed the things that work so not now, because I would have noticed it before now if it's that way when I downloaded originally from that.  I begin to fear that I'll have to kludge with the crop tool, even if the resizing of the image SHOULD be able to.

  Make sure resample is checked:

  

• Photoshop CS5: TextItem width and height not related export Script not values specific

  Hi all

  I'm writing a script for Photoshop export data on the textItems in a document for use in another tool. What I capture data appear to be accurate for the most part, except for the width and height of the textItems. Here's my document settings (these never change):

  Rule and Type units: pixels

  Resolution document: 300 px/inch

  textItem type = text of paragraph

  When you enter values for height and width, I does no conversion, so the values below are gross exports of ExtendScript. I have included the point of a text data in two separate documents (the text element is not the same in both documents).

  Document 1:

  Photoshop: 125 px ExtendScript height: 22.32 22.32/125 px = 5.6

  Photoshop: 231 px ExtendScript width: 46.39 231/46.39 px = 4.98

  Document 2:

  Photoshop: 123 px ExtendScript height: 30,48 px 123/30.48 = 4.03

  Photoshop: 1407 px ExtendScript width: 370.95 1407/370.95 px = 3.79

  If a conversion must be performed to get the value of ExtendScript to match what shows Photoshop, I understand that. However, there is too much variance in multipliers: the difference in height between the two textItems is only 2 pixels, but the multipliers are 5.6 vs 4.03! I do not understand what might be other factors that affect these values.

  Bug textItem.width ExtendScript, the author has provided what he claimed to be a workaround: multiply the ExtendScript value by the resolution of the document, and then dividing by 72. It close me well the values that I needed, but as evidenced by the variable multipliers, it is not consistent.

  Someone at - it suggestions?

  With the help of the function by Paul Riggott (how read scale boxes paragraph?) and Stefan Beckmann (ExtendScript textItem.width bug), I think I have the solution:

  The value exported in the ExtendScript Toolkit is based on a 72 dpi document, even if it uses a baseValue for a document of 300 dpi. This is the bug that needed to be worked around by using the method of Stefan (value * activeDocument.resolution/72). However, I was always getting incorrect values.

  According the information acquired by reading the wire responded by Paul, I realized that I was working with text boxes transformed. This meant that I had to get the transformation factor, using Paul.

  So, I can get accurate values for any document by using the following:

  var width = activeLayer.textItem.width * getTransformFactor() * activeDocument.resolution/72

  var height = activeLayer.textItem.height * getTransformFactor() * activeDocument.resolution/72

  function getTransformFactor() {}

  Var ref = new ActionReference()

  ref.putEnumerated (charIDToTypeID ("Lyr"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"))

  var / / desc = executeActionGet (ref) .getObjectValue (stringIDToTypeID ('textKey'))

  textSize var = desc.getList (stringIDToTypeID ('textStyleRange')) .getObjectValue (0) .getObjectValue (stringI DToTypeID ('textStyle')) .getDouble (stringIDToTypeID ('size'))

  If (desc.hasKey (stringIDToTypeID ('transform'))) {}

  var mFactor = desc.getObjectValue (stringIDToTypeID ('transform')) .getUnitDoubleValue (stringIDToTypeID ("yy"))

  return mFactor

  }

  Returns 1

  }

• How can I get a box of width and height that I resize an object in Illustrator CS6?

  In a training video on Illustrator cs6, that a device is shown below, only the instructor manually resizes a work plan using the tool of work plan:

  

  Justin, the instructor, called the little box that immediately shows width/height a "box of width and height, but the search on this term is not productive. When I run the device program is not available, not only the video explains what option makes available or what could have changed on my copy to hide or disable the box. Even though I know that I can achieve the same effect by choosing the information window and can even adjust settings more precisely using the Control Panel, I would like to have the convenience of this box. Anyone can set up why I'm having a problem?

  I note that the same type of display in the same series of videos (from Lynda.com) is indicated when the instructor resizes an image. After that 30 minutes of research on Google and the search for the identity of this device and how to activate it just empty... can someone point me in the right direction? An experienced editor of first, I'm trying to expand my skills identified in more than Adobe and new to Illustrator. Please forgive me if I'm missing something obvious.

  Thank you

  Jay from the Bronx
  

  Try searching some guides. The rocker is Cmd (Ctrl) u.

• Customize the class Edittext with custom width and height

  I need a class of edittext customize where I can adjust the width and height, but I do not find such a custom class that extends the class EditField and the opportunity to set the width and height. I need to access the EditField methods also. Can we have such a class?

  I solved the problem by substituting the positioning method.

  UriField = new EditField ("", strUri, 2000, EditField.READONLY |) EditField.FIELD_LEFT | EditField.FIELD_VCENTER)
  {
  public void layout (int width, int height) {}
  Are police = getFont();
  int _fieldHeight = font.getHeight ();
  int _fieldWidth = 190;
  Super.Layout (Width, Height);
                  
  setExtent (_fieldWidth, _fieldHeight);

  }
  };

  Thank you all

• Cannot change PopUp LOV width and height in version 4.2.5.00.08. I change the values of 450 400 in the Popup list template values (Section of the window), but my function genList0_f07_$ _row (), retains the same settings. Is this a bug?

  Hello

  I use APEX 4.2.5.00.08 to my app.

  I have a region of reports, where I display a column set. A column is the column attribute "display as" the value 'Popup LOV (LOV based query).

  I press the button to retrieve the LOV, I get a popup of 450 x 400 pixels.

  I go to the side of the model and navigate to "Popup list of values of model", where I can see in the section 'Window' attributes 'Width' and 'Height' value 450 and 400. I edit them and save them and there is nothing going on. I'm sure that the template belongs to my selected theme.

  I saw in the HTML source code that is the called function:

  <!--

  
  function genList0_f07_$ _row)
  {
  w = open ("wwv_flow_utilities.gen_popup_list" +)
  « ? p_filter ="+
  "& p_name = ' + escape ('f07') +.
  ' & p_element_index = ' + escape ('0') +.
  ' & p_elem_id = ' + escape ('f07_0000').
  ' & p_form_index = ' + escape ('0') +.
  ' & p_max_elements = ' + escape ("") +.
  ' & p_escape_html = ' + escape ("") +.
  ' & p_ok_to_query = ' + escape ('YES').
  ' & p_flow_id = ' + escape ('114') +.
  ' & p_page_id = ' + escape ('100201') +.
  ' & p_session_id = ' + escape ('16021544706004').
  ' & p_eval_value = ' + escape ("") +.
  ' & p_translation = ' + escape ('NO') +.
  ' & p_lov = ' +.
  ' & p_lov_checksum = ' +.
  ' & p_item_id = ' + escape('-683997768') +.
  ' & p_column_id = ' + escape ('25022622060292812'),
  "winLov,"
  "Scrollbars = 1, resizable = 1, width =400, height =450"); "
  If (w.opener is nothing)
  w.opener = auto;
  w.Focus ();
  }
  ->

  I see that the values has not changed. I also connected and disconnected. I am inclined to believe that it is a bug of the APEX.

  The only solution I think is to replace this function, which is NOT ideal.

  Thank you

  Digital

  The parameters are generated only, nothing you can do about it because it does not use the model for these properties of the couple. Other things work fine for example the names of button or title window etc. I guess that, Yes, it is a bug. It's still there in the apex 5 too, I checked. The default values of the template do not match, the value in the generated code is always 400/450. So I guess it's pretty much a wait on 5.1.

  Here's a fun hack to make it work well on your page (works in apex 5 too, because the code is always the same). Put this in the execute on loading of the page section:

  (function(){
    var _open = window.open;
    window.open = function(){
      if ( arguments[1] === "winLov" ) {
        arguments[2] = "Scrollbars=1,resizable=1,width=500,height=700";
      };
      return _open.apply(window, arguments);
    };
  })();
  

  Change the settings to your liking. This will replace the existing window.open call, which is what the popup lov use and replace it with our own code. It does not interfere with other things. As the name of the new window is always "winLov" for the popup lov, it is the argument that is checked.

  During the call to window.open to open a new window with the name "winLov", parameters are replaced with your own version of it. The window is called as usual, using the stored reference.

  Edit:

  Yes, do not use the trick of resizing. My hack can be a bit tedious, but it's much less invasive for the end user (see open, bam, resize. "Even gets funky on multiple monitors). Also, this thing in the popup lov template will affect each lov popup that you use in the application, which is much less interesting than my specific page code.

  Edit2:

  I did a little digging in the source code, and I don't know why it does not work. Popup lovs are actually equipped to deal with it. My guess is that the parameters are recovered only after that the lists were generated, causing the package variables global to use their default values instead of model parameters.