Function Discovery Resource Publication "0x80070005: access is denied."

Similar Questions

• When you try to schedule a task in XP, make a mistake "the new task could not be created the specific error is 0x80070005: access is denied."

  My

  System Type X 86-based PC
  Processor x 86 Family 6 Model 23 Stepping 10 GenuineIntel ~ 3324 Mhz
  A05 BIOS Version/Date Dell Inc., 07-31-2009
  SMBIOS 2.5 version

  I'm trying to schedule a new task I get this error

  The new task could not be created specific error is 0x80070005: access is denied

  I am an administrator for this computer and I am connected to the office network.

  I downloaded a patch KB904423, but it tells me that the installer has detected that the SP of the system version is newer the updte I am applying, I did not need to install this update

  Is there any fix for this?

  Thank you

  Hi dgxp64,

  ·         The computer is on a domain network?

  Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2: Check to see if this article helps you.

  How to solve the scheduled tasks in Windows XP and Windows Server 2003

  Method 3: We will grant permission for the C:\Users folder and check if it helps.

  How to set, view, change, or remove special permissions for files and folders in Windows XP

  If the computer is on a domain network you can post your query on the TechNet Forums.

  Windows XP IT Pro category

• Compatible Windows Vista backup the failed 0x80070005: access is denied

  I am more able to backup my PC.  It fails with a 0 x 80070005 (access) refused.  I carefully watched the backup trying to glean what file fails when it tries to read it for the backup.  It fails on a file on the C: drive, but it happens too fast.  I can't determine the file name and THE EVENT LOG IS NOT THE NAME OF THE LOG FILE.  I have no idea how to solve this problem. My last successful backup was dec 2010.

  It would be a great start to save the file whose access is denied when the backup fails.  then we can proceed.

  Hi MickyLee3

   

  You can check if the problem occurs in a clean boot state. You can check if no service interferes with the backup. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

   When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• [PX6 - 300 D] Resource monitor - "access is denied. You must be a user admin to access this application. »

  Hello

  I get this error message when I try to open the monitor of resourse

  "Access is denied. You must be a user admin to access this application. »

  I use the admin account. Where could be the problem?

  Thank you very much in advance.

  Hello Steven,

  Thank you for your support. The problem has been resolved by reinstalling the software. It seems that the new version of the software is out - strange here was that my request for resource monitor appeared also to update in the update software tab.

  Thanks again.

• I ran cmd on my computer and it says "windows resource protection found corrupt files but was unable to correct. He gave me a newspaper to look at, but access is denied. c:\windows\logs\CBS\CBS.log? /

  I ran cmd on my computer and it says "windows resource protection found corrupt files but was unable to correct. He gave me a newspaper to look at, but access is denied. c:\windows\logs\CBS\CBS.log? /

  Hello

  This should help you.

  You need to run as admin.

  "How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista"

  http://support.Microsoft.com/kb/928228

  And if the problems cannot be fixed, you may need to do a repair upgrade installation.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• The backup computer fails with the error "access is denied. (0x80070005) »

  original title: computer backup failure

  My computer will be back up to a point, then will be an error "access is denied. (0x80070005) "at the same time, Microsoft security essentials SAIS it detects a potential threat.

  My question is this: if he stops because it detects a corrupted file?  or is there an error with a certain application that prevents a full backup?

  Hi Cyberwasp35,

  ·         Exactly how are you trying to backup?

  ·         You run the computer as an administrator?

  ·         Have you tried a backup on an external hard drive?

  Try the following steps.

  Step 1

  Perform an online scan to remove the threat detected by the basics of Microsoft security during the backup process

  To make online scan click on the link below:

   

  Online analysis of Microsoft security essentials

  http://OneCare.live.com/site/en-us/default.htm

  Try to disable antivirus software and check if the backup is successful.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2

  This error can also occur because the recovery partition is enabled for the file backup or restore of the system and is almost full. To work around this problem, do not select D:\ as a backup source. In addition, go to the System Protection in Control Panel and make sure that D:\ is not activated for restore points.

  (1) open the backup and restore by clicking on the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking the backup and restore.

  2) click change settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (3) clear the partition D drive if it is selected, and then try to backup again

  Check if the service is stopped or started. Change it to start if it is stopped. The service name is windows backup.

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  Reply back with the results

• "The backup did not complete successfully. Access is denied. (0x80070005)

  IV got a new pc a few months ago, im (del vostro 220) by getting only round to back up all my stuff now. I've run the wizard, insert a dvdr and follow the instructions. A few minutes later, I get the message...

  "The backup did not complete successfully. Access is denied. (0x80070005)

  You can also view this page.
  Quote:
  "This error occurs because the recovery partition is enabled for the file backup or restore of the system and is almost full. To work around this problem, do not select D:\ as a backup source. Also, go to the System Protection in Control Panel and make sure that D:\ is not activated for restore points. »

• Impossible to find information of the domain in the database and access is denied. (Exception from HRESULT: 0x80070005)

  Configuration of the VM Windows 8 of my model fails and causes the following error in log audit Broker rd.

  I'm running vWorkspace 8 with different Hyper-V hosts (without SCVMM).

  clues?

  Broker - INFO - CVdiMachineHyperV::startHyperVClone: cloning xxx, try = 1...

  Broker - INFO - CVdiMachineHyperV::buildParentVHDPath: entering, the folder path is "D:\". ', file name is "xxx.vhdx".

  Broker - DEBUG - CDbManager: Re-use of conn = 0x038215c0 (50)

  Conn CDbManager:keeping broker - DEBUG - = 0x038215c0 (50, lastCount = 49)

  Broker - INFO - CDbManager:connection held 0MS

  Broker - INFO - CVdiMachineHyperV::buildParentVHDPath: the Final folder path is «D:\Quest VMs\ParentVHDs\ vWorkspace»

  Broker - INFO - CVdiMachineHyperV::buildParentVHDFilePart: Extension, part of parent's name is "xxx".

  Broker - INFO - CVdiMachineHyperV::buildParentVHDPath: Final full path is «D:\Quest VMs\ParentVHDs\xxx-20130927090200.vhdx vWorkspace»

  Broker - INFO - CVdiMachineHyperV::startHyperVClone: Call to CHyperVClone::doClone...

  Broker - INFO - CVdiUtils::pnGetDomainControllers: entering, strDnsDomainName is "xxx".

  Broker - INFO - CVdiUtils::getDnsServersForManagedDomain: entering, strDnsDomainName is "xxx".

  Broker - DEBUG - CDbManager: Re-use of conn = 0x038215c0 (50)

  Broker - INFO - CVdiUtils::getDnsServersForManagedDomain: ERROR: could not find the domain managed in the database information for xxx

  Conn CDbManager:keeping broker - DEBUG - = 0x038215c0 (50, lastCount = 49)

  Broker - INFO - CDbManager:connection held 0MS

  Broker - INFO - CVdiUtils::pnGetDomainControllers: WARNING: could not find the domain information managed in the database for xxx

  Broker - INFO - CVdiMachineHyperV::startHyperVClone: domain name into IP [xxx] [xxx]

  Broker - INFO - CHyperVClone::doClone: taken exception. Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))

  Broker - INFO - CVdiMachineHyperV::startHyperVClone: took CJvmErr during the CHyperVClone::doClone call.

  Broker - INFO - CVdiMachineHyperV::doVdiAction: ERROR: create failed.  Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) - call stacks - to System.Management.ThreadDispatch.Start)

  Hi Freek,

  I think you have a support case to open to this question as it seems similar to the one I was talking to Sam earlier, is that correct?

  Thank you

  David

• Windows Activation error 7: an error has occurred; Access is denied. ; 0x80070005

  I recently had a weird problem with my Dell Inspiron 1525 under Windows 7 Home Premium.  (Which is here: http://bit.ly/rwzCt6).  In any case it was resolved to boot from the Windows 7 Edition installation disc Home Premium and do a system restore.  When I logged on I was so happy that I wasn't getting the famous black screen with cursor.  But now my background is black and bottom right, he says:

  Windows 7
  Build 7601
  This copy of Windows is not genuine
  Whenever I open the 'Activate Windows' program, he said only: "an error has occurred."  If I click on see details, it is said:
  Code:
  0x80070005
  
  
  Description:
  Access is denied.
  I can't use Office, Security Essentials, and it is really annoying that every five minutes it tells me to activate online (which by the way, tells me this):
  Windows validation has been stopped.
  
  
  The validation service is unavailable at this time.  Please try validation again later.).
  Anyway, I'd appreciate any help I have buy Windows 7 and Office and I cannot use it properly.  Thanks in advance!
  EDIT:
  I just got a message saying the following:
  Windows must be restored
  
  
  An unauthorized change was made to Windows.  You must reinstall or restore Windows system files to activate.
  
  
  How to reinstlall Windows?
  What is system restore?
  
  
  _____

     | Close |
  
  
  Also, here is my report of diagnosis:
  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  
  

  Validation code: 50

  Code of Validation caching online: 0x0

  Windows product key: *-* - YVY6H - KWQGK-43CVP

  The Windows Product Key hash: hD77W7MCMCNBBclOu3WNr0B4jiI =

  Windows product ID: 00359-031-8202817-85512

  Windows product ID type: 5

  Windows license type: retail

  The Windows OS version: 6.1.7601.2.00010300.1.0.003

  ID: {1C40B657-E0E9-44F8-A29F-82EDBE1CE829} (3)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: registered 1.9.9.1,

  Signed by: Microsoft

  Product name: Windows 7 Home Premium

  Architecture: 0x00000000

  Build lab: 7601.win7sp1_gdr.110622 - 1506

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a
  
  
  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  
  
  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002
  
  
  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002
  
  
  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
  
  
  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\Zach\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed
  
  
  Analysis of file data-->
  
  
  Other data-->
  Office details: {1C40B657-E0E9-44F8-A29F-82EDBE1CE829}1.9.0027.06.1.7601.2.00010300.1.0.003x 32*-*-*-*-43CVP00359-031-8202817-855125S-1-5-21-1948162439-658446731-1811467869Dell Inc.. Inspiron 1525 Dell Inc.. A16 20081016000000.000000 + 000BA5D3107018400FA10090409Time(GMT-05:00) Standard is03DELL M08 109  
  
  
  Content Spsys.log: 0 x 80070002
  
  
  License data-->
  C:\Windows\system32\slmgr.vbs(1131, 5) Microsoft VBScript runtime error: permission denied
  
  
  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C327
  Beyond: 0 x 0000000000000000
  Event timestamp: 11:22:2011 17:28
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  
  
  
  
  --> HWID data
  Current Hash HWID: OgAAAAEABgABAAIAAAACAAAAAgABAAEAeqhcPoQkwLJsPLbACiVGg2zM7vAGpJT7ovGLyF7kguwqhQ ==
  
  
  Activation 1.0 data OEM-->
  N/A
  
  
  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  REFERENCE DELL M08 APIC
  FACP DELL M08
  HPET DELL M08
  STARTING DELL M08
  MCFG DELL M08
  M08 DELL SLIC
  OSFR DELL M08
  SSDT PmRef CpuPm

  Hmm - what is the error with Development?

  The Norton Removal Tool is here...

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080710133834EN&product=home&version=1&PVID=f-home

  (I have problems accessing for the moment)

  do not worry about the error of wshext.dll - it is not relevant, in my opinion.

  Restart, and run another MGADiag - he'll tell us if the re-recordings had no effect.

• PC XP sees but cannot access Vista PC on network. Access is denied!

  I have 4 computers on a network.  The network is set up in a private capacity.  3 computers XP Home can meet and 1 PC Vista Home Premium and can share files between the computers XP 3.  The Vista PC can see other computers and can send files to them quite happy.

  However, when one of the XP computers trying to access the Vista computer I immediately get an error "\\VistaPC is not accessible.  You might not have permission to use this resource network etc etc.  Access is denied. "

  I turned on the discovery of the network, public folder sharing, file sharing and printer.

  Protected by password sharing and multimedia file sharing are turned off, but all shared folders on the Vista PC all have their set of permissions for everyone because I don't want to have to enter the username and password whenever I need access.

  LLTD is installed and Vista network map shows all devices and their correct connection; all wired through a Netgear router except 1 wireless XP.

  Help, please.  It drives me crazy!

  I only use the Windows Firewall and AVG Free anti-virus.

  Well, I finally solved my problem, but don't know what action it reached or if it was a combination of actions.  If anyone is interested, here's what I did.

  On the Vista machine, I edited sharing the folder Public, all subfolders and files to share fully.

  Checked the security settings for all of the public folders, subfolders and files, and then assign full control to all users.

  'Everybody' added as a user and allowed full control for this user.

  Restarted after each step but when even could not access shared folders on the Vista machine.

  In desperation I edited the registry; went to HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Control / Lsa
  Change the value of a key called "restrictanonymous" to 0 instead of 1

  Quick restart and Hey Presto my network to work properly

  My network is secure and so I didn't bother reduce some apparent security settings.  Don't know if it's appropriate for everyone but it might give some clues.

  Good luck

• SyncToy 2.1 'unknown error. Access is denied. »

  I just bought a new laptop I want to synchronize with my desktop.

  SyncToy 2.1 is only installed on the desktop.

  Both are equipped with Windows 7 and are the only members of a homegroup.

  The files are accessible in both directions through the homegroup.

  Folder on the left C:\Users\Me\Documents\

  Good record \\TINY\Users\Me\Documents\

  Both machines have all the boxes SHARE the LIBRARIES of PRINTERS AND audited.

  Under CHANGE ADVANCED SHARING SETTINGS both are configured as follows:

  Turn on network discovery

  Open file and printer sharing

  Turn on sharing so anyone with network access can read and write files in public folders

  Use 128-bit encryption to protect file sharing connections

  Turn off password protected sharing

  Allow Windows to manage the homegroup connections

    

  HOWEVER

  When I right click on a folder to share (IE. My Documents) and follow the SHARE WITH menu drop down, no one is to his left, a lock icon

  If I try to change the READ/WRITE permissions to the homegroup it allows me to select, but when I revisit, he returned to PERSON with the padlock icon to its left

  When I run SyncToy 2.1 and ALL RUN the meter end account but each unique number is the column down in red.

  The SyncToy execution completed with errors.

  Read errors: error Error: Unknown. Access is denied. (Exception of HRRESULT: 0x80070005 (E_ACCESSDENIED)) Copy the path C:\Users\me\file

  I have this feeling I'm missing something very basic, but I don't know what it is. Your help will be very appreciated.

  I have experienced the same problem earlier with SyncToy 2.1 running on my Win 7 x 64 Dell e4310 backup bare SATA hard drives via a Kingwin dock via eSATA.

  More funny thing is: SyncToy to backup all the files on my disk WD Caviar 320 GB ("Backup1") without any error. But when I pop my WD Caviar Green 1 TB drive it in ("Backup 2") grates fair 520 failure operations. All with "Exception from HRRESULT: 0x80070005 (E_ACCESSDENIED).

  How I fixed it:

  Shift-right click on SyncToy 2.1(x64) and select 'run as administrator '.

  It worked for me.

• C:Windows\system32\Config\systemprofile\Desktop is not accessible. Access is denied.

  Microsoft Windows updates have been loaded and now I get the following when I connect my PC.  C:Windows\system32\Config\systemprofile\Desktop is not accessible.  Access is denied.  I get this after I get my ID and password.  All my shortcuts are missing and the screen is black with a tollbar inside.

  Hi ronreyna,

  Try the following steps:

  Put the computer in a clean boot (namely if any third-party software hinders the process)

  http://support.Microsoft.com/kb/929135 ---> how to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  (Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)

  ------------------------------------------------------------------------------------------------------------------------------

  The SFC utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a sfc on the windows vista computer scan. To run a scan suite sfc as follows:

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt type sfc/scannow , and then press ENTER.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't delete a folder that was created when I downloaded DIVX. Message I get is "Destination access folder denied" any suggestions?

  I can't delete a folder that was created when I downloaded DIVX. Message I get is "Destination access folder denied" any suggestions?

  Try to use Unlocker to:http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml this programs often works when the normal functions of remove Vista not work correctly.

  If this does not work, you need to change the permissions and ownership on the file in order to have all the rights and the property (even on the inherited rights).  Then try Unlocker.  Here's the information to help you do.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: Access is denied, cannot delete the printer and also impossible to install programs

  Original title: access is denied cannot remove the device

  my Canon MX340 printer worked fine until the scanner stopped working advises by canon for uninstall programs / drivers and icon / as asked today did nothing working and used to install programs / drivers and can not remove the icon from the Control Panel, access is denied. Clues

  THX

  Hi Tony,.

  Please help me with the following information pricing to this question:

  1 is your computer and the printer connected to a network or domain?

  2 are logged in as an administrator on the computer?

  3. What are the programs that you are not able to install on your computer and provide also us whne exact error that you are trying to install programs?

  I suggest you refer to the suggestion provided by Waseemulla Shariff said on March 17, 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-can-not-delete-a-printer-from-devices-and/c0d72c68-0387-45ff-b47d-38318b2090b5

  Once you remove the printer successfully, you try to install the printer drivers from your printer manufacturer's website and check the functionality. Consult the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx340#DriversAndSoftware

  If you are not able to install any program on your computer, I suggest refer you suggestions provided by Sandeep Dsouza said on June 13, 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/access-is-denied-unable-to-remove-device-HP/1a45f1dd-ba47-47af-90E7-00310a988fcb

  Please answer us on the State of the question to help you further.

• Visible ReadyDLNA, but access is denied

  Hello

  I have a 1 TB external drive connected to my router. I can access the drive as a drive of the PC network via WiFi without any problem. - but I can't access the drive as a media server.

  Both options 'enable media server' and "enable TiVo support" is enabled, the scan is set to automatic (well you do not click anything else here) and I gave the media server a name. It is visible on all devices - PS3, Yamaha, engineering app on Android phone, PC network drive...--> but NO devices can access! It said "access denied" the other said 'no file' windows says "connection was not accepted" etc... It is very annoying because he used to work before.

  It is certainly a problem of router and not of any device as any device can open the media server. I just changed the settings on the router - only the name of the server, SID and so on. I have already restored the router to the factory settings, but it's the same then! "ReadyDLNA" is visible on all devices, but access is denied.

  Thank you very much for your help!

  Hi @SarastroSaruman,

  NETGEAR routers can handle multimedia 25000 and 10000 files for iTunes.

  Kind regards

  Dexter

  The community team