function keys not working not not toshiba satellite P875

My laptop is fairly new, less than 6 months, and I regularly put updated, but for some reason, all my function keys stopped working. The only thing they do, it's me enter and exit full screen in chrome mode. Really annoyed on this subject and any help is appreciated.

Probably as a result of some update optional / recommended that you have installed, if you don't know not what updates have been installed when this problem first occurred, visit the support site of Tosh for your model and reinstall the correct of there drivers

Tags: Windows

Similar Questions

  • Function keys not working do not after Windows 7 installation

    Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you

    What can I do with this? I want to re install windows. ?

    Hello

    This thread offers you everything you need to install the right keyboard control drivers and utilities for your function keys working again:

    http://www.geek.com/forums/topic/Sony-VAIO-fn-keys-no-longer-work

    Don't forget to keep your model number of the laptop at hand for the page of the driver from the Sony site.

  • A210-17i XP function keys not working not

    Hey, I bought a Notbook Equium model: A210-17i, I downgraded to XP, and I need the function keys to work.
    It doesn't seem to be all the drivers available to me, if someone can please help me find?

    Any help would be appreciated!

    Have you installed all the drivers from Toshiba?

    Be sure to only install the driver Hotkey, modules, FN-Esse, Toshiba common controls. An update of the BIOS can also help :)

  • A drive enclosure hard card SBT-EKU25 will work with a Toshiba Satellite L355D?

    As the title indicates, I would like to know if a Sabrent SBT-EKU25 ultra slim USB 2.0 hard drive 2.5 inch pregnant will it work with my Toshiba Satellite L355D model. I've never used a hard drive enclosure before and I just want to be sure that it will work with my computer before buying it.

    The housing of the hard drive, it also says IDE/PATA, but I know not really knowing what that means. I would be very happy if someone would inform me on that as well.

    Thank you for your time.

    MissSakura.

    Hello!

    I don't know, but as I know that this model comes with a SATA (Serial ATA) hard disk drive & enclosure is PATA (Parallel ATA), so it won't work. but you can try and take your laptop to a computer guy and ask him to be sure if the hard drive can be adapted to your external case. Also, if it is a SATA hard drive you can always go for an external SATA enclosure.

    Concerning

    Microsoft-Most-Valuable-Professional, blog at: http://www.thecomputernext.com

  • Someone else has volume function keys stop working?  If so, I know a fix?

    Sometimes, my function keys stop working.  The small volume box appears and the volume is shown to change but there is no real effect on the volume.  Anyone know a fix for this other than to restart the computer?

    you have speakers connected, secure, powered?

    helmet?

     > System Preferences > Sound

    What is your output on?

  • Special function keys not working not not on Satellite C50 - Windows 8.1

    Hello

    Please could someone help me.

    I have a Toshiba Satellite C50-A0393, I received a few months ago with already installed Windows 8.1 (64-bit). Today, I got a message saying that I had to watch the PC health, a blue message Toshiba about that the access agreement and I noticed that there are three updates that needed to be done, the only one, I remember being the Toshiba Video Player. I think that another had to do with the light of the charger?
    I do not know.

    But once I rebooted my laptop after the update I noticed that the special function keys were not working (i.e. the volume, mute, pause and play, etc..). Then, I went to the Toshiba Office help and in Control Panel and select the keyboard tab. I did as the setting for the special function mode has been selected.

    Now, when this setting is in place, some keys work but for F3, F5, F6, etc. and when I want to use special features that the volume up and down work when pressing 'Fn', but the special function mode is still selected? These two work only, not the mute or the flightmode or bluetooth, which was operating normally before the updates.

    I googled but can't find something specific to 8.1, or not covered do not upgrade to 8.1. I can't find the flashcard utility and do not want to try something where I don't know what I'm doing. How can I get these special function keys working again normally? Sorry for the long message, but I wanted to give as much information as possible.

    Thank you very much

    Melanie

    Hello

    It seems strange to me that an update of Toshiba (Toshiba Video Player, etc.) would have an impact on the key features of function.
    However, the function key (F1 - F10) can be used in combination with or without the FN key. It depends on the special function key mode.

    In case you want to use the F1 - F12 functions without the FN key, the key mode of function must be enabled (should be set to the special mode of operation)

    Full details here how it works:
    https://APS2.toshiba-tro.de/KB0/HTD2503B90001R01.htm

    Now it these buttons would not work even if pressing the FN key, then there is a problem with the software.

    First of all I would recommend allows you to set the default BIOS because this mode key function can be changed in the BIOS too.
    After this, check if the key would work. If not, reinstall
    Key feature of Toshiba utility

    And the driver for the Toshiba system

    You can also check if the essential service has not been disabled.
    Start the Task Manager and go to start a number of questions. You must activate all Toshiba apps, services and then restart.

  • Satellite P750-10 t - (Eco, WLAN, Volume, etc.) function keys not working not

    Hello world

    I have a problem with my Satellite P750-10 t (PSAY3E-02000KGR, Windows 7 64 bit, German-language edition).

    The "Function keys" top line, naming Eco Mode button, WLAN button, program Start button, Play/Pause button, Mute button and Volume-/ + buttons stopped working a week ago. They light up correctly when starting the corresponding modes (e.g. Eco Mode lights up green when the Eco utility is in Eco mode by mouse) or when turning on keyboard backlight, but they do not react on the touch of the finger.
    As a result, I am unable to use WLAN because I can't turn on the WIFI laptop feature.

    I already reinstalled Toshiba Flash Cards and value-added package of programs without success.

    You have any suggestions to solve the problem? Thank you very much.

    Best regards from Germany,
    Jan

    Hello Jan

    Open it please help Toshiba > Optimize > parameter HW Toshiba > settings button > is option function active button it?

  • Satellite Pro A120 - error function keys not working and affected

    I have a Satellite Pro A120 PSAC1E-04Q00VEN.

    A couple of weeks, I started to have a dialog "Error of TouchED" to come to the start box (containing the message: 'Thotkey' recovery has no code error 0 X 00031402, 0x00000002) and at the same time the function keys did not work.

    I spent several hours as a result of the wide variety of questions that have been posted on this forum and elsewhere regarding this problem with computers laptop Toshiba, but nothing has worked. I reinstalled all the drivers from my initial backup disk, installed new drivers on the Toshiba site, updated the bios and restored the system to date before the problem started to occur. I also can't find Thotkey.exe everywhere on my machine.

    Can anyone help with this? It seems to be a common problem, for which he doesn't seem to be a definitive answer. Any useful response would be really appreciated.

    David

    Hey Buddy

    Go to the page of European driver of Toshiba.
    Select your laptop model and download and reinstall the tools and the following drivers:
    -Common module
    -Utilities for display devices Hotkey
    -Utilities
    -Wireless keyboard shortcut

    Check it out!

  • Satellite L850 - special function key not working not properly

    Hello world

    I had Satellite L850 bite of windows 8 64 (pskg8a-07f001) running for only 2 months.
    Only within this week, the special function key does not work do not, whenever I start the pc, I have to go into toshiba assist office then the function key, and then click ok, it will work.

    But the touchpad has been defined as licence also under keyboard setting was defined as special function mode. But don't know why every time you start the pc must go in the function key box, and then click ok.

    When I bought everything is ok, I can use the special function key to turn, up and down the volume and disable wireless... etc.

    Please notify. Thks a lot!

    Have a look here:
    Function key change to Satellite and Qosmio 800 series
    http://APS2.toshiba-tro.de/KB0/TSB2903E00000R01.htm

    You can use the traditional keys FN + F mode or just a F key mode.
    This can be enabled and disabled in the BIOS or the HWSetup

    In BIOS go to Advanced-> system-> the function mode button configuration
    This mode can be changed
    Also remember that the function button is activated too

  • Satellite P100 PSPA3A - Touchpad and function keys not working not

    Hello
    I'm new to the forum so please excuse my lack of computer skills.

    Where my problems began, is that I deleted the driver of my computer keyboard.
    I reinstalled and now works with the exception of the function keys.

    I tried to install Hotkeys out of the Toshiba web site without success. It will not be loaded on the computer for me.
    I also reinstalled "utilities" and in doing so the touch pad mouse has stopped working.

    Is someone able to offer, for me, what should I do to fix this?

    Thank you very much in advance for your help.
    Sam

    I never heard of a keyboard driver deleting, but if some of your buttons work so I think the software is very good. It may be a loose keyboard connector is loose, which is located under your keyboard around the buttons 'Fred '.

    I return the phone to the place of purchase and get them to fix it. Less pain for you and an easy solution. Keep it simple, everyone!

    Good luck.

  • Re: Function keys not working not not on Satellite U400

    I recently bought a new U400 - h - 13 it is boneless.

    So I installed WinXP SP3 and all the drivers downloaded from the Toshiba support page. The machine works well, but some of the function keys, namely Fn + F1, F2, F3, F4, and Toshiba Zoom do not work. All others are OK.

    What can be the reason?

    To install the drivers it is not enough. For some functions, you must install the tools of Toshiba on the Toshiba site.
    Install the utilities of the shortcut key and the Toshiba Utilities.

    Maybe you should also update the BIOS. You can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Function keys not working not not on Satellite A300

    Hello

    I have a laptop Toshiba A300 and the function keys do not work.
    I'm sure that its probably a simple problem to solve, but I can't find anything about this in the user manual.
    The laptop works fine accept for this, but it is a problem that we need these buttons to connect to the projector.

    Could someone help?

    Hmm, depends on the operating system that is pre-installed on your laptop.

    If you use the Vista operating system you must first check if the Toshiba FlashCards are activated. This tool is connected with the FN + F1 - F9 button feature.

    If the sheets are already enabled, then you should try to reinstall Vista Toshiba value added package.

    Concerning

  • Satellite Pro A120-10W - function keys not working not not from the cloth of hard drive

    Hello

    I have a Satellite Pro A120-10W under Windows XP Pro SP3, and just had my hard drive erased, because of virus. Everything seems to work fine, but I can't use function keys to change the brightness etc. I looked in various forums help however most seem to give answers for Windows 7 or vista. 7
    Can someone please?

    Thanks in advance.

    Hello

    As you can see in other threads, you need special drivers/tools for the keys FN get their work because there is no standard Windows driver for these keys.

    In any case, you must download the common Modules like Akuma wrote. After installing the key should start working again.
    You can download the tools on the official website of Toshiba.

    If you have problems with the installation or it succeeded, just after a few comments. ;)

  • Portege R100 and Linux - function keys not working do not and the latest version of the BIOS?

    Hello world

    I have a Portege R100 (PPR10L-13G10P). I am trying to install Linux and when you try to access function keys (F6) the computer does not allow me to... no idea why?

    Also, what is the latest version of BIOS for this computer? And where it can be downloaded?

    Thanks in advance!

    Terrence

    Hello

    At first, I must say that Toshiba doesn't support Linux in general if you are alone with this problem.
    I hope that someone will be able to help you a bit.
    If you want to discover the latest version of the BIOS, just enter the BIOS settings and check it out.
    BIOS version latest won't help you at all, so my opinion is that you shouldn't change anything.

    Anyway, the bio download page is - http://www.toshiba.eu/innovation/download_bios.jsp

    The feature keys F is supported by special tool Windows and it only works on Windows.

  • Qosmio X 870-F special function keys not working not

    Hello

    I just got my laptop (windows 8.1) repaired with replacement being installed equipment. Something I noticed only worse is how the brightness F keys do not respond. The F2 and F3 keys work themselves, but not the special function. It's really weird that others work very well, as the volume.

    I tried to uninstall/install two DLC driver (was utilitarian value Toshiba or something but I can't remember names are the other was literally the wording of the keys/keyboard fn or f in there). It did not work.

    Can anyone help solve this for me? I don't know what windows 10 comes along it all reset and hopefully work again, but this is a very niggling nuisance at the moment.

    Thank you.

    Unisntall the Toshiba Value Added Package because this package isn't compatible with Win system 8.1

    You need to install the:
    Toshiba Driver for Win 8.1 system
    http://Support1.toshiba-tro.de/Tedd-...1016171635.zip

    as well as the
    Toshiba to Win 8.1 function key utility
    http://Support1.toshiba-tro.de/Tedd-...1002134400.zip

    Check also all 8.1 Win 64-bit drivers available for this series.

    I recommend you to test the different graphics card drivers where the brightness of the display would not work properly.

Maybe you are looking for

  • Satellite P series shuts up to 20 times per day

    Hello everyone.I was wondering if you could help with this problem. Computer portable Satellite to my son kept totally extinguish up to 20 times a day, so I tried to do a re-installation using the recovery CD offered 2.I put the laptop to boot from t

  • Laptop HP 15 t-r160: could not get the replacement for Hp 15 laptop cover... URGH!

    I'm repplace the rear/top hood for a 15 HP laptop, model number 15 t-r160. It is blue. The customer has dropped and damaged about everything on the left rear corner (hinge, lcd screen, corner covers...) and the upper rear cover. The part # on the bro

  • XPS 2720 - replace SSD of 32 GB to 500 GB SSD to use as a boot drive

    I bought a new mSATA 500 GB SSD with the intention of replacing the current 32 GB SSD, but instead of using it for caching as is currently the case, I wish it were my boot drive. I got from crucial and they provided a license for acronis help to mgir

  • Upgrade the NAC of 4.5 to 4.8

    Hello everyone I'm about to upgrade to a CNA of 4.5 to 4.8 on an application I do in a bank with 1500 users. The upgrade is due because the Bank makes its migration from PC to Windows 7 The implementation is in a failover situation (2) and (2) CAM. t

  • Setting up blackBerry Smartphones new email

    My blackberry 8300 was given to me by someone who had used it for a few months. I still get e-mails. How can I delete old addresses email without password and set up my email? Help, please!