Function of path of the band directly in TestStand?

Similar Questions

• Is it possible to copy the path of the file directly from bridge?

  I am looking for a way to copy the path of the file directly from bridge. Does anyone know if there is a way? Usually the Finder I a copy of 'get info '.

  Thank you

  Click on the last item in the path bar or in the empty space to the right of the last point.  This will change the contents of address bar path to a mode that is editable by the full path highlighted then you can copy to the Clipboard (and spent as you wish).  Press ESC to return to the normal path display mode.

• How to fix the x 0 80070035 on the path by the servername directive after sleep?

  Laptop running windows 7 Enterprise x 64 SP1.

  Files on server (running Windows 2003 Standard X 64) were available before system suspended / hibernated. After the recovery, get the path not found error from the Explorer or trying to save files that are open in the application.

  PING resolves the name of the server Ok and answers in 4 milliseconds.

  Remote Desktop can resolve the name of the server and connect to the server OK...

  Explore access to shares and files on the server using the IP address of the server, but not by using its name.

  Rebooting always fixes the problem.

  I am sure this must be a well-known problem but can't find the answer.

  Thank you

  John

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Technet Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• How can I get the path to the current report of TestStand.

  I need to automatically print a report of failure of TestStand. I have implemented an automatically generated file name in TS Report Options and send it to a default directory on the hard drive. The reports are generated correctly, but on a test failure, that I want to find the name of the last file so I can print it. Does anyone know how to do?

  Thank you

  Dave

  There is a way to print until execution ends.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/5889

• Path will not close - generates a line in the opposite direction.

  Illustrator CC 2015.2.0

  I am closing a path and selected ' paths nearby when ends are located 20 pixels"" "".

  Sometimes, the path ends normally. Sometimes it does not close the path (even if I'm within 20 pixels) and generates a short path in the opposite direction...

  Also has anyone seen this problem?

  Jacob,

  I switch between GPU and CPU according to your suggestion, and so far it seems to respond normally. It is an intermittent problem, so I don't know if the problem will appear again until I work with it for a while.

  I hope that you have solved the problem. Thank you.

• How to constrain angle of anchorage when I pull on a path with the direct Selection tool?

  How to constrain angle of anchorage when I pull on a path with the direct Selection tool, as it did in all versions of Illustrator since 1988? New behavior is costing me time.

  Open preferences > display selection and anchor.

  Here you can constrain the handles

• Get separate paths and the depth attribute value using the XQuery function

  Hi otn.
  I want to write the function XQuery that accept the following input document nodes.
  
  < counter Root = "8" >
  < has counter = "3" >
  < meter B '2' = >
  < C meter = "1" >
  < meter D = "1" / >
  / < C >
  < /B >
  < C meter = "2" >
  < counter E = "1" / >
  / < C >
  < /A >
  < meter B = "4" >
  < C meter = "3" / >
  < /B >
  < C meter = "6" >
  < counter E = "3" / >
  < counter D '2' = >
  < counter E = "1" / >
  / < d: >
  / < C >
  < meter D = "2" / >
  < counter E = "4" >
  < counter F = "1" / >
  < /E >
  < counter F = "1" / >
  < / root >
  
  Then returns many things at the same time as follows:
  1 - list of all of the separate paths
  2 - meter of the depth of each path element attribute value
  3 - the value of the previous counter in 2, is divided by the value of the attribute root counter.
  
  Thanks in advance :)))

  I'm sorry that not all xml input data correctly.

  You must use the {code} tag to enclose the code snippets. Formatting will be preserved and content not interpreted by the forum software.

  Here's an XQuery query that should work:

  declare function local:list-paths($d as element())
  as element()*
  {
    let $root := name($d)
    let $rootcnt := xs:integer($d/@counter)
    for $i in $d/descendant::*
    return element path
    {
      attribute value {
        substring-after(
          string-join(
            for $j in $i/ancestor-or-self::*
            return name($j)
          , "/"
          )
        , $root
        )
      }
    , attribute counter {$i/@counter}
    , attribute percentage {xs:integer($i/@counter) div $rootcnt}
    }
  };
  

• Error when run through the function of path to add-in with writing to the amusement of the worksheet

  Hello world

  I wondered why the error no. 7 is coming as being attached, when I run the program.

  My intention is to write (from the FIFO) data in the worksheet by using entry for measuring function. I connected 1 d table at the entrance of table 1 d of this function. I connecetd the file port add this sub VI to the controller of the file add. I couldn't connect with indicator file add. Wire broken watch by doing this.

  Can you give me a suggestion needed to overcome this error and accomplish my data record using this sub VI (write to spreadsheet.vi)?

  Required attachments are provided for your convenience.

  Thank you.

  
  

• How can I set the path for the layoff to Prem CC band?

  I have a new subscription to Prem CC and need to sack on DV tape.

  The settings I would like to import from tape and so the firewire connection is OK. The problem is, when I come to lay off the mounting tape, first disc recorder but the vision and sound aren't out to the recorder.

  In first CS5 there was formerly a section of playback settings as a drop down menu on the program monitor, but it's now just reading of resolution for the computer screen.

  Can someone tell me how to set the path to the drive?

  These images help?

  

  

  Jeff

• How do you get the path of the data store or the URL of a virtual disk in vRealize Orchestrator?

  I need to eager zero a virtual disk while building a virtual machine. I found the eagerZeroVirtualDisk_Task() under VcVirtualDiskManager function, which takes in 2 parameters:

  name - (String) the name of the disk, is a path to the data store or a URL pointing to the virtual disk that needs to be inflated.

  Data Center - (VcDatacenter) if the name is a path of data store, the data center for the path of the data store. Not necessary when called directly on ESX. If not specified on a call to VirtualCenter, the name must be a URL.

  How can I get the correct path of data store given the virtual disk? I intend to iterate through the features of the virtual machine to get the disks.

  Thank you!

  Actually figured out how to get the path of the data store, and how a drive zeros. In case it is useful to share the code here:

  var vimHost = vm.vimHost; VM instanceof VCVirtualMachine

  var vDiskMgr = vimHost.virtualDiskManager;

  for each disk

  var features = vm.config.hardware.device;

  for each {(dev var in devices)

  dev.backing contains a lot of useful things...

  If (dev instanceof VcVirtualDisk) {}

  a disc!

  var dsPath = dev.backing.fileName;

  System.log ("path of disk:" + dsPath);

  Data var Center =

  System.getModule('com.vmware.library.vc.datastore').getDatacenterForDatastore (dev.backing.datastore);

  var vcTask = vDiskMgr.eagerZeroVirtualDisk_Task (dsPath, datacenter);

  wait

  var waitResult =

  System.getModule('com.vmware.library.vc.basic').vim3WaitTaskEnd (vcTask, true, 5);

  }

  }

• How can I get the band to tabs to show

  Suddenly, the band tabs disappeared! Don't know how I did it, and I can't get it back.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• I'm doing a script that takes a list of e-mail from a text file and then allow me to select a save as a string. I found some ways to get the path of the file, but I'm in check by pulling the list

  I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).

  What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
  e '.

  example of extractedb.txt information:

  [email protected]

  [email protected]

  [email protected]

  * has a random number of emails as well *.

  I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.

  Any help would be great = D

  Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error.  Based on a single or multiple list item content of the list, display accordingly.

  game of mf to ((path to the folder as text) & "mail_list.txt")

  the value mf_List to {}

  the value sel_addr to {}

  the value mf_List to paragraphs of (read file mf)

  the value sel_addr to (choose from the list mf_List with title ¬

  ('Mail list' with multiple selections allowed without empty selection allowed)

  If sel_addr is equal to false then

  Error number-128

  return

  end if

  If length of sel_addr is equal to 1 then

  sel_addr display dialog box as text

  on the other

  the value Point to the text of TID to AppleScript delimiters

  the value Point text in AppleScript return delimiters

  display the dialog box elements of sel_addr in the text

  the value Text of point AppleScript delimiters to TID

  end if

  return

• When I'm not moving that my GPS heading in the opposite direction

  I use Google maps and a number of other applications that use the GPS in my phone. In each of them whenever I move, the map will show me (or I guess my phone) pointed in the opposite direction. I start to drive 10-20 feet before he turns around and points to come. It has been like this for a good while and when I put an address to get there that I never know what direction I must go because it will start the route goes in the wrong direction. I constantly have to zoom out to see the entire route to know if I should go back or not. How can I fix?

  It is the internal compass, not GPS. All you need to do to recalibrate it's cards and tilt your phone in the three axes for a bit (until the arrow points to the right path). This will work better outside. Stay out of cars or whatever it is of another metal. Hold the phone flat, tilt the screen forward and back a few times, the. Left and right and then turn left and right. (Or on the flight plan, no body roll and yaw)

• Path Type returns 0, absolute path should return 2 &lt; not a path &gt; when the path is empty

  Path Type function should return 2 when the path is empty

  Now, it returns the absolute 0 path if the path is empty.

  I would use it to check if the user has entered a path or not.

  Of course, I could check to see if the control isn't a path or vacuum, but he would NCE to have a function to check.

  

  I understand what you're saying.  If you look in the OpenG code, there is a VI of valid path that does what you ask.

• set a path to the report manually by using &lt; clientfiledir &gt;

  Hi all

  I'm pretty new to teststand so please forgive me if this is an easy question.

  BACKGROUND

  I'm running a sequence (TestGroup) that contains several sequences (tests) that work as a new execution.  It allows me to produce an individual report for each test (the top-level sequence produces a summary report only).

  QUESTION

  I want each of the reports to be stored in a single folder. I have setup report options to calculate the path of the report by using the following expression "\\Reports\\\\SummaryReport [] []".".

  This works very well for the top level, but that this also applies to the subsequences path is recalculated and is different from that of the upper level.

  CURRENT SOLUTION

  I'm currently moving the report path as a parameter to test sequences, but I find the value of the macro (from the sequence of high level) to build the report path.  Can someone tell me how to get this?

  Another solution is for me to take the path of the current report and the name of the file of this band.  It's a better solution?

  Any help would be great.  Thank you

  G

  Hi Jack,

  I use a whole test sequence (seq) group and a running each of my tests as a new execution.  This means that I can apply a different template to each test (which is needed to support the old style of the previous tests developed by my client) and produce a report of individual test for each test.  Then I clear the list of results when the report was drafted and replace it with a link to the report for the test (I hope that this reduces the risk of running out of memory on long series of tests).

  Each of my 'tests' is indeed a full sequence.

  I was hoping to use something similar to macros to move the report path to each of my tests (or model for the test), but have not been able to find these values anywhere in the report options window.  Ultimately I have to now take the string generated for high level sequence 'group' and make a formatted string and then pass it as a parameter testing (an another headache that had some problems).

  I'm not really a fan of this and think it should be possibel to configure the report options different for each model, that I had to do it manually by hardcoding stuff like path .xsl etc names.

  can someone tellme if it seems like the right approach?

  G