Function of scrolling of the mouse after a new installation.

Similar Questions

• Windows 8 - horizontal scroll on the mouse does not

  Hello, everyone,

  I have a system running 64-bit Windows 8. My Gigabyte M6980 mouse has a wheel tilt with a capacity to reach not only up and down but also left and right. However, the inclination of the wheel does not record in my Win8 machine.

  I plugged the mouse on a Vista laptop where initially the system has not yet recognized the mouse at all (the cursor is not mobile). After going to the Manager of devices and update the driver for the "unknown device" which was M6980, it became a "HID-compatible mouse. I could then move the cursor AND use the horizontal scrolling. On a Windows 7 computer, the mouse was recognized immediately and I could use horizontal scrolling very well.

  I tried to copy mouclass.sys of my laptop Vista and mouhid.sys to C:/Windows/System32/drivers on my machine Windows 8, but then the mouse could not be recognized at all the original files should be restored. The same thing happened when I copied the same files from a Windows 7 machine.

  Gigabyte support response is that the mouse does not officially support Windows 8 and all the features are not guaranteed. There are no drivers available for the device and the only software that comes with it is motor Ghost of Gigabyte for remapping keys. But given that horizontal scrolling works in Windows 7 without any additional software, I suspect driver Windows 8 HID is involved, although I could well be wrong. I couldn't Google solutions. Any help would be appreciated.

  See you soon,.
  Jesse

  Hi ShiuabKhan,

  Thanks for a quick reply. Windows 8 is now picking up the thin horizontal scrolling messages. I tried to randomly check the software option Gigabyte 'disable horizontal scrolling' and apply changes and then uncheck the new, and, curiously, it started working. However, I install the latest version of the software from Gigabyte (which just happened to be released February 1) in compatibility mode to be on the safe side.

  Although the system is now picking up messages from horizontal scrolling of the mouse, my Battlefield 3 game won't recognize them, but is not a Windows problem, so I'll find an answer elsewhere.

  Thank you much for the help!

  See you soon,.
  Jesse

• Scrolling with the mouse on the pages to create black and white, lines

  When scrolling with the mouse, periodically the entire screen turns into black and white lines. Page sometimes together, sometimes just from ads pictures/side. If you continue to scroll disappear but you need to scroll to where the lines have begun, it's hard to explain, I took 1 picture of the problem but will have more photos that I can, I love how Firefox works on my computer, it has always been the best browser for my needs. I recently bought a new desktop computer, but he did so also, so I deleted and tried to launch the Explorer and Google and I don't like, so I hope that we can settle this problem.

  I don't know if it solved the problem, but he didn't precisely these days. Thank you

• Scrolling with the mouse 5.1 BootCamp

  Scrolling with the mouse stopped working all of a sudden on BootCamp 5.1.

  Do you have any active Windows automatic updates?

• I have a Logitech M315 keyboard and bought a new mouse Logitech M325 compatible. I cannot now typing on the keyboard, but I can scroll with the mouse.

  I have a Logitech M315 keyboard and bought a new mouse Logitech M325 compatible. I cannot now typing on the keyboard, but I can scroll with the mouse.

  Hello

  The M325 Nano-receiver allows you to connect up to 6 devices however you
  need a Logitech utility (free download) to achieve this. Check with Logitech
  Their online documentation, support and drivers, utilities and ask in their forums.

  I don't know if that keyboard and mouse are compatible.

  Software Logitech Unifying M325
  http://support.Logitech.com/product/wireless-mouse-M325#download

  Logitech
  http://www.Logitech.com/en-us/home

  Logitech - Support
  http://www.Logitech.com/en-us/support

  Logitech - Forums
  http://forums.Logitech.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• datacad compatibility how to reverse the scrolling of the mouse

  At work, we have windows 7 64-bit Professional installed on the machines. We use a software architecture called Datacad, which is 32-bit. I am trying to find a way to reverse the scrolling of the mouse. In windows xp, this was accomplished by entering the program and enter in and adding to the file .ini "reverse scroll wheel zoom = true". It will not work on windows 7 64-bit professional. The program has been installed in the "program (x 86) directory. Anyone know how I can get this to work? Can it be a compatibility problem and if so what can be done to fix it?

  This site of program would have compatibility details or updates required for win7, relevant to this version of the program

• Function keys not working do not after Windows 7 installation

  Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you

  What can I do with this? I want to re install windows. ?

  Hello

  This thread offers you everything you need to install the right keyboard control drivers and utilities for your function keys working again:

  http://www.geek.com/forums/topic/Sony-VAIO-fn-keys-no-longer-work

  Don't forget to keep your model number of the laptop at hand for the page of the driver from the Sony site.

• After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

  After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

  Try typing the key to recovery without 5 dashes.

• After disk hard crash, loaded Windows 7 and get "Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations.

  Original title: Windows Vista product key used for any new installation.

  I bought the upgrade from Windows 7 Home Premium to Windows Vista CD, then had a hard drive crash, then installed a new hard drive. Load the purchased Windows 7 on new hard drive, now I get the message '... Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations. That means that I have to load Vista on the new hard drive, and then update? Both for the end user (paying customer) hostile.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If you do not have your Windows Vista installation media, you can download a fresh copy:

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)		Windows Vista (x 64)
  X 14 - 63452.exe	X 14 - 63453.exe
  Boot.wim	Boot.wim
  install.wim	install.wim

  Installation instructions (creation of bootable DVD/USB)

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once you have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB flash drive (USB FlashDrive recommendations, see here).

  

  FF

• I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste,

  Issue.

  I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste, but no result. The widget disappear into the legend of block. disappear. Do you have a solution?

  Thank you

  Loïc

  Accordion Panel tabs should, with click and open the container.

  Please provide the url of the site where it does not, also if you can provide an example where we can see the exact action, then it would help us.

  Thank you

  Sanjit

• Strange behavior of the mouse after installing the updated driver

  Hello

  Windows Update suggested that I update the mouse and/or the keyboard driver detection. I don't remember the exact message.

  Also, I find no trace of this update in the box "Installed updates". It seems that the driver updates are not included.

  Symptom: Periodically, the screen scrolls upward around 3 lines, even through I'm even not touching the mouse. It's like the wheel was scrolled beyond a tick.

  This has never happened before this update of detection has been installed.

  Windows 64-bit Enterprise, USB Intellimouse Optical 1.1

  How can I find the update has been installed? How can I remove it?

  Thanks - ankle

  Hi MaskedAnkle,

  Thank you for using Microsoft Windows forum.

  If you want to see the updated story to update try the following steps to check the update has been installed for programs.

  1. open the control panel (all items view), and click the Windows Update icon. (See screenshot below)

  2. click on the link to view update history. (See screenshot below)

  3. to view the details of a single Windows Update-

  (A) select and right-click on a Windows Update list, and then click details. (See screenshot below step 4)

  (B) click on close when finished. (See screenshot below)

  4. to copy the details of an update of Windows unique to Clipboard-

  (A) select and right-click on a Windows Update list, and then click details.

  NOTE: It will be the same details in step 3, but in a text format instead.

  (B) you can now copy the contents of the Clipboard (ctrl + V) in a program such as Notepad or WordPad.

  If you think that the problem occurred after the installation of the update of the driver, you can restore the mouse driver and check if that helps.

  Steps to roll back a driver:

  #Open Control Panel Windows Device Manager.

  Manager #In of devices, look for the device that you want to restore the driver.

  #After find the material you are roll back the driver, right click on the name or the icon of the device and click Properties.

  #In the properties of the device window, click the driver tab.

  #On tab driver, click on the button return to the previous version.

  Note: If the button return to the previous version is disabled, Windows 7 doesn't have a previous driver to roll back to then you will not be able to complete this process.

  #Click the button Yes to the question "Are you sure you want to restore the driver previously installed software?".

  We now find the driver already installed. You should see the button return to the previous version is disabled when the roll back is finished.

  #Click the close button at the bottom of the screen of the device properties.

  #Click Yes in the system settings change dialog box that says: "your hardware settings have changed. You must restart your computer for these changes to take effect. You want to restart your computer now? »

  If this message is hidden, the close window command panel might help. You will not be able to close the Device Manager.
  
  Note: you are according to the device driver roll back, it is possible that you will not need to restart your PC. If you
  do not see the message, consider the complete rear roller.

  #Your computer will now restart automatically.

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed

  You can also try the system restore if the problem persists,
  See: http://support.microsoft.com/kb/936212/

  Hope this has helped

  Kind regards
  Aziz Nadeem - Microsoft Support

• Functionality of scrolling on the touchpad does not work... help!

  I have an Inspiron 1525, just the other day that the functionality of the touchpad scroll has stopped working.  I tried to look in the control panel to find an option to turn "scroll" back on, I found nothing.  I am running Windows Vista. Any suggestions on how to turn "scroll" back on?

  Hello

  Try the system restore before you did it again at:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  -------------------------------------------------------

  If necessary:

  Control Panel - mouse - look for the TouchPad settings - mine is on the settings of the device and your own tab
  may be different (it is NOT the Scrollings tab which is for the mouse). On some, you can activate
  and disable scrolling and/or define the size of the area and the sensitivity of the touchpad.

  Some will have a TouchPad progam/control icon in the Notification area near the clock - low
  right.

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I cannot scroll with the mouse or keyboard

  I could not spend the last few weeks. When I scroll to the top it jumps automatically to the bottom and vice versa and willl not stay where I want it. I bought a new mouse and checked the settings I can think. and did two restorations go back before the problem started.  I have Vista Home Premium but I see people with Windows 7 have the same problem too.

  After you have everything unplugged and then plugged one at a time that I found is the keyboard, the origin of the problem of scrolling. I do not see how, but I'll take a new keyboard and we hope for the best.

• Vertical scrolling of the changes after each reboot.

  Hello

  I changed a vertical scrolling on 3 but after reboot, vertical scrolling defaults to 1!

  

  My system:

  HP 4540

  Intel Core i5 3230 M 2.60 GHz to 3.20 GHz

  6 GB of Ram

  AMD Radeon HD 7650M 2 GB

  All the drivers are installed and updated.

  Best

  Hello Mohammad Abedi,

  The laptop HP 4540 Synaptic touchpad that works with synaptic drivers, this problem may occur if the installed drivers for the touchpad synaptic are corrupt.

  I would recommend that you uninstall and reinstall the drivers for the Synaptic touchpad. Here is the link where you download and then install the latest drivers for the Synaptic touchpad.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts.Oid=5229457&swItem=ob_104738_1

  Also check these settings:

  a. click on Start

  b. click Control Panel

  c. Select display by > large icons or small icons

  d. click on mouse and navigate to the following location: device settings > Synaptics Touchpad > settings > virtual scrolling and check the option "enable vertical scrolling.

  e. check if it helps you to activate the vertical scroll on your touchpad.

  Hope the helps of the steps.

• Reverse the scrolling of the mouse in the window of the program (Premiere Pro 2015.1)

  Scrolling the mouse with a the cursor to the program window is a style of mounting very useful to me, especially with the hotkeys ripple trim. I can easily navigate to the preferred framework and make an edit

  After that the update for Premiere Pro 2015.1 scrolling in the window of the program has been overturned - scroll down now juts read head. In the MEANTIME of scrolling in the editing window works as before.

  Is there a chanse to reverse the scrolling in the program window back? I don't find any option in preferences (except chronology mouse scrolling, which is not the case, as I mentioned).

  After that the update for Premiere Pro 2015.1 scrolling in the window of the program has been overturned - scroll down now juts read head.

  That is right.  It's backward before, Adobe set.

  Enjoy.