Functions in the script being not recognized after objects as some point

Hi all

I wonder if someone has understood why after normally 300 to 500 lines of JavaScript in a Script object, sometimes functions to the end are no longer recognized by the XFA processor when they are referenced ("' TypeError: Scripts.myFunction is not a function" ").

When re-sort, further to the top of the script object, they work as expected. The line on which it no longer recognizes functions also is not always the same and I worked with some script objects with more than 800 lines with all functions still work.

I tested Designer 9 and 10, Reader 8 9 and 10.

At least let me know that I'm not the only one. I knew another developer who had encountered the same problem.

Kyle

I've never had a problem with big scripts, even with 1000 or more lines.

Did you test your scripts JSLint?

Dirty syntax can always have side effects.

http://blogs.Adobe.com/formfeed/2010/09/JavaScript-lint-check-in-Designer.html

Tags: Adobe LiveCycle

Similar Questions

  • The password on the computer is not recognized after resuming the computer from sleep mode.

    Original title: windows password problem

    This just started today. When I log on to the computer after having paused, it says that my password is incorrect. Caps lock is disabled and the password. Then I hard boot my computer & it will take my password. What's happening & how to fix it? Help please.

    What do I do or what can I change it to something like a real password?

    Now that you have at least a password that works you must run your own experiences. You might have a problem with CapsLock, NumLock or a few keys that misbehaves. Change a letter/digit at a time until the password fails, you must point in the right direction. We cannot do this for you.

  • niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

    Hi all!

    I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

    Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

    I also downloaded example c# measure DC Voltsto compare with my request.

    Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

    DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

    I guess it is function of device PXI!

    I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

    NOR-DAQmx 8.9.5

    NOR-DMM 3.0.1

    NI-VISA 4.6.1

    NOR-MAX 4.6.2f1

    Roberto

    Hello Robson,

    Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

    KB 33A96PCW: receive error-1074118656 when running OR DMM screws

    Let me know if this might help.

    Best regards.

  • Pavilion p6210t: CD/DVD HP Pavilion p6210t drive is not recognized after upgrade Windows 10

    HP Pavilion p6210t DVD/CD drive is not recognized after the upgrade to Windows.  DVD/CD material is: LightScribe16XmaxDVD + / R/RWSuperMultidrv.  I can't find an updated driver for this device, download and install. Thanks for any advice you can provide.

    Thank you for your response.  I can't find somewhere - it now despite a lot of research - I read on a very simple solution to this problem which is (was) affecting hundreds of users HP.  In essence, the solution said that the DVD drive has in fact been recognized [as evidenced by his appearance in the BIOS] but has been "identified" and how to fix this problem was to go into the DEVICE MANAGER and delete the incorrect identification reference - then restart the computer and Windows 10 would correctly identify the DVD player and correctly in the DEVICE MANAGER list.  I decided to try this simple fix before one of the more complex solutions that were offered.  The simple solutioon worked! 

  • XPS 8700 Fax / Data modem not recognized after mode 'sleep'

    I have an internal modem installed pci-e.  After the system goes into sleep mode, the modem is not recognized.  Resolution is to draw the pci-e card, restart the system, then stop again, re - install the Fax/data modem and it is recognized, until the system goes into sleep or stop mode.

    How can I keep the device recognition, didn't have to pull on the map and re-insert/install whenever I start?

    When I look at the Device Manager after the mode standby or shutdown, the device will display hidden and not connected to the system.

    System BIOS is updated to the current 10 A

    Always include the version of Windows in your messages.

    You may need to change sleep settings and possibly disable hybrid sleep by using the Windows power options, and/or adjust the power options in the BIOS Setup.

  • I mistakenly checked the box "don't show me this message again" on the Script does not have attention... How can I bring back?

    Hi and thanks for reading my question,

    I recently got a pop up box "warning: the Script does not" Firefox v38.0 and checked by mistake the box (paraphrase) "don't show me this message again."

    How can I report these warnings? I saw something in the tools-> Options area... have I missed?

    Thank you!

    You can check these prefs on the topic: config page and if either appears "BOLD" (user set) (bold) then right click in the pref and click Reset.

    You can open the topic: config page via the address bar.
    You can accept the warning and click on "I'll be careful" to continue.

  • The browser does not start after you have turned off and turned on the computer

    The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

    • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

    Thank you

  • HP EliteBook 8730w: replacement of SSD for the boot drive not recognized

    I'm trying to install a Samsung SSD 840 EVO 500 GB instead of the original 500 GB HDD in my Elitebook 8730w (product no. VF889PA #ABG). The 8730w has the latest BIOS (F.20) installed and that is running Windows 7 Professional 32-bit (fully patched).

    When it is connected to the laptop through a USB adapter, to clone the HARD disk image. the SSDS works correctly. Cloning through data Migration Samsung is reported as a success, and the image of the C:\ drive occupies approximately 153 GB. The image of the disc does not include the partition of 1 GB dedicated to HP_TOOLS, due to a known limit of the Samsung software supplied.

    When it is installed in the HARD drive Bay. the SSD is not recognized as a drive and does not appear in the list of startup options. The available boot options only shown are the DVD or a network boot.

    would be very grateful for any advice on the steps required to successfully install the Samsung SSD as boot drive.

    Hmmm.
    Honestly no, I'm not happy with this one. If it was my machine, I'd be a little concerned about whats the corner of the street. In view of the age, is not surprising really, things wear out over time, the mere fact of electronics.

    Search through everything you have posted, all photos, pdf, all the text double checking. I am absolutely puzzled as to what happened. If you 100% does not reinstall the hard disk between the posts above where no HARD drive is detected in the menu boot options for the post below that where the HARD drive is detected in the same menu. I would say that you have a problem with either, the ssd, the computer motherboard laptop or the small connector on the sata port, I think on these is integrated on the motherboard, so it seems that your advice is doubtful.
    If his works now, great... but be aware that your machine can fail at some point in the near future. And it looks like a defect of the motherboard, other things are probably waiting to fail.

    There is no reason whatsoever your laptop must not have seen this ssd at first startup. A HARD drive is a HARD disk, if its compatible sata, then it will work, no doubt. When he is not on an older machine, its probably a sign of a faulty component.

    Looking through your bios options, I recommend the following.

    On startup options, get rid of internal nic pxe boot, that will only slow your machine at startup as it will seek for a network bootable device. This is the message that you get at startup saying Media Test Failure, this page is preventable with this option disabled.
    Less built lan/wlan switching on enabled in the options of the terminal, also change. This means that if you use wifi at home for example and you decide to plug in a cable network directly to the router to speed up the connection, it will not pass if it is not defined, you will have to do it manually. I work in a large company and the number of people who have this option is unreal. They all assume when they are docked they will on the wired connection.

    Because we are here too, if you ever have problems with a flickering screen, first thing to try, is disable the ambient light sensor which is just below this option of switching. Its fine on normally, but its quite common on 8560p for this causes a flickering screen.

    Hope that helped. Good luck in what you decide to do with the machine

  • The dial of the watch is not recognized when I touch it or by scanning

    Sometimes the dial of the watch is not recognized when I touch it or by scanning. This could be the cause?

    Hello

    It can help to restart your iPhone and your watch. Turn both devices off first, and then restart your iPhone before restarting your watch:

    -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

    -To switch on: press and hold the side button until you see the Apple logo.

  • map of mSATA being not recognized on X 220-help

    Lenovo x 220

    Winodws 7 64-bit, up to this day

    MyDigitalSSD Super Cache2 50mm SATA III (6 G) mSATA SSD

    I installed my mSATA card by following the instructions and the party went well. As a couple of other people the player is not recognized by Windows 7. I checked storage management in windows 7 and the drive is not there in any form. I disabled all the caches as suggest some positions in the policies for the drive in windows 7. Once again no drive recognized.

    Any help you could provide would be really appreciated.

    Thank you

    Hi camjohnston,

    There are a few discussions about this on this map and a knowledge base article for you to check.

    Let us know what you find!

  • I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

    I have my black getit monitor and the computer does not respound after 2 mnts when I start playing games online

    Hello

    1. what operating system is installed on the computer?
    2. what web browser are you using to play the games online?
    3. don't you make changes to the computer before the show?

    If you use Internet Explorer, then I suggest you to try the steps from the following link:

    The problems of games online using Internet Explorer
    http://support.Microsoft.com/kb/2528246

    Additional information:

    Why my screen is black when I start Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

    Solve game problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems

    The problems of the game performance
    http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

    Troubleshoot display with Microsoft games
    http://support.Microsoft.com/kb/263039

  • I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.

    My laptop with Windows XP does not connect to the camera?  How can I reconnect these?

    I have my camera, a Kodak M1033, connected to the computer by a usb cable.  The connection is not recognized.  What I can do.

    Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk

  • The mouse settings not saved after reboot/restart

    I'm changing the speed at which my mouse pointer moves on the screen.  I'm doing a 'demand' the change, and then click on 'ok '.   The point of the mouse moves faster in the game.  Then after reboot/restart the computer, the mouse setting is default slower movement speed.   The changes are not saved after reboot.   What keeps the change of speed of movement of the mouse to be saved?

    Mr. Brian,

    Please, try the following steps.  This should allow you to keep all the settings in the SetPoint software at the same time to solve your problem.

    1. click on the Start ORB, type msconfig in the Search box and hit Enter
    If you are prompted for an administrator password or a confirmation, type your password or click on continue
      
    2. in the System Configuration dialog box, click the Startup tab
    3. Locate the entries called KHALMNPR or similar and uncheck the box next to them (there may only be a)
    4. click OK and restart your computer
    5. after reboot, change the speed of your mouse pointer and restart

    This should solve your problem.  Please let us know.  Thank you.

    Shane
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Can't burn a cd. The music is not recognized.

    I can't burn an audio cd. The Player recognizes my blank cd, and it says I have 79:57 minutes to burn. But when I add music to the burn list, I always 79:57 free minutes. The music is in the burn list, but I can't start a burn because the music is not recognized. Can someone respond to this please?

    I don't know what I did, but as soon as I played the music button "Start burn" is now available. I didn't understand why the music was not recognized in the burn list because yesterday I did the same thing and I had no problem, but knowing that everything is the same. The music was compatible and the burner has not been damaged, so I guess it was just a temporary system problem. Thanks for answer and sorry for wasting your time :)

  • Hello, anyone have any experience to try a plan after a trial, but the site is not opening after clicking on buy...?

    Hello, anyone have any experience to try a plan after a trial, but the site is not opening after clicking on buy...

    It was useful, now everything works fine!

    Felsherif December 23, 2013 right answer 12:51 AM

    I had a long discussion with a Support Agent and finally solved my problem in activating my root user... after a lot of trial and error/attemtpts. Here is my summary just fyi, I hope this works for you also.

    I'm on MacBook Pro OS X 10.8.5.

    1. They had me first go to ~/Library/Applications support/Adobe/OOBE and delete the file 'opm.db '... Creative cloud question remained.
    2. Then they asked me to go to support/Adobe ~/Library/Applications and rename the files "AAMUpdater" and "OOBE"... and go to the library/application support/Adobe (note this is a different path) and remane the files "AAMupdater" and "AAMupadaterInventory"... question remained.
    3. They had me also go to my Netwrok Prefrences, Proxy server to configure, and enusre all boxes are unchecked and "use Passive FTP Mode (PASV)" also unchecked... did not help, the question remained.
    4. Of course they had me uninstall and then reinstall the creative cloud application, which I did (Applications > utilities > Adobe installer and run the "uninstall Creative Cloud")... but the question remianed.
    5. Finally, they had me to visit this page on the Apple support page, http://support.apple.com/kb/ht1528 and activated the user root for OS X Lion.
      1. After allowing the root user (and create a new password for it), I rebooted my Mac
      2. Saved in my Mac once as 'root' and connected to Adobe Creative Cloud using my usual Adobe user/email name and password.
      3. Go to the 'Applications' tab, and it worked perfectly!
      4. I disconnected the root on my Mac, then that reconnected me.
      5. Launched the creative application of Cloud, connected and went to 'Apps'... works great!

Maybe you are looking for

  • INI without Ini_New file handle

    Hi all First of all I apologize in advance if this question seems boat for many of you, but I have not found good examples on the INI files. My problem is the following: I have an already INI file that does not exist, I want to change a few settings.

  • Change password protected tab

    Hello I found this vi on this forum that creates a password on the third tab (in the example). I tried to change it to protect only the first tab (with the control button to relock the tab on the first page too), but it did not work. Also, is it poss

  • XP Home Edition crashed after installation of updates, will not start in any mode, help!

    Compaq Presario V2000 After you install the updates, H.E. XP crashed. Try to start in safe mode accused the MUPS. SYS line press F8 to disable automatic reboot Restart in any mode result in the horror of horrors the Blue Screen of Death with the foll

  • Blue Screen Of Death with Windows Vista

    I am running Windows Vista and after trying to update a NVIDIA Geforce driver, my computer will not start at the top and comes up with the "blue screen of death/Disconnections. Initially it started, but icons were very large and I could finally get t

  • Vista indicates the product key is to be used, it's not good

    I install vista Ultimate edition, after installation it is said the product key is used.