Fund and screen savers will not change.

Similar Questions

• HP Pavilion 15z Touch: screen brightness will not change

  When I use the keyboard commands to adjust the brightness of the screen, it does not work. When I go into the control panel to set the brightness of the screen remains the same. The adjustment bar will move from dim to bright but the brightness of the display will not change. How can I fix it? I've only had this computer for 4 days, so everything is still at the factory.

  Hello @KayLeeM,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I came across your post about the brightness of the display and wanted to help!

  Try searching for the Device Manager in the Start Menu.  Then expand the monitors section and see if you have an option for Generic PnP monitor.  If so, do a right-click on him and generic PnP monitor enable, if not already.  Now, check to see if you can adjust the brightness.  If you're still having problems, then try to see the following resource and let me know how it goes:

  Difficulty of Windows 10 brightness control works not problem, here's how to [Guide]

  (Not a HP website supported).

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Kind regards!

• BlackBerry Q5 display on lock screen wallpaper will not change (with aprental controls off-road and without)

  The following took place in my quest to solve the meanless screen too high.  That's why I serched for several Blackberry World and internet screen savers.

  At some point, I downloaded a wallpaper of the internet where I have the image itself has been doenloaded in images and from there I clicked it and got options to use as paper screen wallpaper and wall of a lock.

  Later, I found the other wallpaers and succeeded him.  However, it has not changed the lock screen wallpaper.

  I did it with the parental control is turned off.  Later, when I changed the wallpaper that's not going away from the lock screen, the icons were changed and new wallpaper was left out leaving a black background.

  But this process has not changed the lock screen.

  I deleted the uploaded image independent of photos and the lock screen still shows the wallpaper I'm changing.

  Any suggestions?

  Thanks, I've thought about it.  It's the fact that the original file was set as wallpaper screen and lock of bot.  I changed just walpapers thanks walpaper software added to the Q5.

• color and font size will not change in emails, blogs, forums, etc.

  I can change is more the style or color of fonts in emails, blogs, forums, etc. I can change the font size and nothing else. Everything works when I'm connected using the Explorer is a parameter or a firefox update that is the cause of the problem. If I cut/copy and paste into a word from a web site document I can't yet make a change. If I copy a word document in a web site, the colors and the fonts back to default setting. I tried to change the setting in the fonts and colours Options, they make changes, but they do not solve the problem.

  Hello

  Please check if this happens in a new profile. If it's good, you can later copy the personal data of the old profile. Firefox stores your personal data and settings to another separate location of the files/folder. A new profile would default Firefox settings (Tools (Alt + T) > Options and topic: config ) and usually also would be vacuum of Extensions and themes (appearance) in Tools > Add-ons) and their parameters. In addition, a new profile would have no previous stored site data/settings etc. (Tools > clear recent history).

  Profiles Howto

  Files & profile folder

  Subject: config entries

• Screen brightness will not change

  Greetings.  I have the model SVE14A35CXH.  A new problem has arisen today: I can't set my screen brighntess.  It does not solve with manual controls (i.e., using the function key, or by accessing the settings of the bar charms, or by the 'Power Options' Control Panel).  Moreover, I observe without changing the brightness of the screen during the occultation/increase in ambient light, despite the fact that I have activated in the VAIO Control Center of automatic detection of brightness.  I am running Windows 8.1, and all of my updates seem to be current.  I would be grateful for any suggestion.  Thank you!

  Hi cjwinchell,

  How about turning off auto brightness in Vaio Control Center then manually changing the brightness? It work? Please provide us with the information we provide the correct solutions. Thank you!

  ~ Mark

• G70 screen resolution will not change

  HP G70 - 257CL running Windows Vista Home Premium SP2

  Mobile Intel 4 Series Express Chipset Family

  Have this second hand with a broken screen. Until I could get a new screen, I used the HARD drive in another notebook successfully. Now reinstalled in the G70, have everything works fine except the screen resolution.

  Reports adapter Device Manager works correctly. I uninstalled and reinstalled, updated the drivers. But no matter what resolution to choose for the screen, it remains the same.  I've currently set to 1440 X 900, 32-bit color, refresh rate of 60 Hz. But what I get is closer to 800 X 600. And it stays that way, no matter what I put it to.

  To the best of my knowledge, I uninstalled all drivers associated with the other laptop, so there should not be anything interfere. Thanks for any help, that all the world can offer.

  Hi Barnaby,.

  It doesn't sound like an exorcism is necessary. From all I have seen and know the computers that he shouldn't do that. Before you call the Ghostbusters or a priest try connecting an external monitor to see if you have the same problems.

  http://support.HP.com/us-en/document/c01938980

  Thank you

• Keyboard and spell check language will not change back to English after a stint at the French although everything changes again in English

  I changed language iPad in French (but not the region, which remains United Kingdom) in order to write an email in French.  Everything on the iPad changed in French as expected.  When I'm done I changed the language to English (UK) and everything changed in English unless the auditor keyboard and which remained in French.  I then changed to English (India) but the keyboard and spell checker is in French.  I have changed the language to the French and finally back to English (United Kingdom).  While everything on the iPad to the language changes expected, the keyboard and spell checker will not change to French.  How do go back to English?

  Press the 'globe' and select English.  It is the keyboard that determines the spell checker (not the language or region).

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• Portege M700 will not change the screen orientation

  I installed the driver for the webcam for the M700, and every time I install it, I get the same error message:

  "Open Webcam driver fail - please restart camera or computer."

  I reinstalled the drivers of many times, and it still does not work.

  Therefore, I tried the msconfig method, disabled all the startup process and then reactivated their.

  The webcam shows the same error message, and now the screen will not change orientation when I rotate the screen.

  You try to use Windows XP Home edition or what? Generally, each laptop comes with preinstalled and configured operating system.

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change the size of the resolution and the image does not change the result on the screen?

  
  I use Photoshop CS3. I'm changing the resolution of several images that will be printed in a newspaper. So the current images are 72 dpi and really huge - for example 36 x 27 inches (size of the document), and when I change it to 300 dpi, the size of the image to reduce to about 8 x 6 inches, as I hope. But the image I see on the screen does not change. Thus, for example, when I open the image originally, it's 33% and the entire image is visible. After I change the resolution and the size of the image has changed accordingly, the image appears to be always the same and it remains at 33%. The image should not shrink on the screen because its size has been reduced? Or if she stays the same on the screen, the percentage should not change? I mean if the size of the document is now 8 x 6, it should be able to display at 100% and not to fill my whole screen... I'm so confused. Thank you...

  Gradded,

  The "Size of the Document" of the dialog box size of the Image is just to specify the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor does not care something about PPI. The monitor contains a number of pixels and after you change this setting, ppp, the monitor will always be the same number of pixels.

  As long as you leave the box "Resampling" disabled, will not change the size of your image (pixel Dimensions). You won't see any change on your monitor. If you check "Resample", then the size (in pixels) of your image will change.

  I hope this helps.

• Icons wiggle and move in the home screen but will not go to the next page

  Icons wiggle and move in the home screen but will not go to the next page

  You need to move to the edge and hold the button for a few seconds so he can move to another screen.

• Mini 210-1080NR: down loaded Windows 10. view now showing BACK script and will not change. Mini 210-1080NR

  Try load W-10. Process appear to be normal. The display is now BACK showing script and will not change and cannot close the laptop down or off. Not a user made and do not want to complicate the issue.

  WAWood;

  The laptop has completed W - 10 download and installation seems to work as announced.

  The problem with the 1st attempt will be captured in Gremlins.

  Thank you for your quick response.

  Ben

• XP screensaver time stuck at 20 min wait and will not change

  I had to replace my hard drive and reload Windows XP sp3 is installed. the screen saver will not stop coming after 20 min. I tried to put it all the way up to 9999 min. The power is set to never turn off. Don't know what it takes to re install all over again. Help!

  Hello

  Welcome to the Microsoft Community and forums thanks for posting the question.

  According to the description, the screen saver can't come after 20 minutes.

  Provide more information about the issue so that we can help you.

  We will define the time-out screen saver 0 or none in the registry. See the steps.

  1. open the registry editor. Click the Windows "Start" button and click on 'run '.

  2. on the left panel of the Registry Editor window, click the folder "HKEY_CURRENT_USER", click "Control Panel," click on ""Desktop. " "

  3. on the right side of the Registry Editor window Panel, double-click on ""ScreenSaveTimeOut " and then type the new timeout in seconds in the"value data"box." Press the Enter"" key.

  4. close the registry Editor window and restart your

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Hope this information helps. Please reply with the status so that we can help you.

• I would like to change my subscription to a new laptop computer. Can I just disconnect on the old laptop and upload the new or should I uninstall on the old?   I also installed on my desktop that will not change. Thank you!

  I would like to change my subscription to a new laptop computer. Can I just disconnect on the old laptop and upload the new or should I uninstall on the old?   I also installed on my desktop that will not change. Thank you!

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0