Fuse CC

Similar Questions

• Installation problem - 10.12 sierra Fender fuse and macos

  Hello world!!!

  I can't install the software fender fuse guitar amp on my mac pro with sierra 10.12 book!

  Due security installation authorised download preferences on my mac, in the sierra of new OS it is not "anywhere" button so I can't install fender fuse!

  How can avoid or skip this 'install security preferences' and install the fender fuse software?

  Thank you very much!!!

  http://osxdaily.com/2016/09/27/allow-apps-from-anywhere-MacOS-gatekeeper/

  But don't forget to read the entire article and note the cautions.

• HP laserjet CP5525: error fuser 50.B2.00

  When I turn the printer on it more this message "error fuser 50.B2.00. I turned it works but still the same problem. Please what do I do?

  Thanks to you my printer works again. I changed the fuser unit as you advised him and that's all the printer started working. Thank you very much for the support.

• New iMac, can enter the fuser unit 1 TB

  Thanks to a grant, I recently acquired an iMac for my Orchestra class. Because I intend to store videos of students playing their instruments, I went with the upgrade to a fusion of 1 TB drive. Our school district allows music classes to have Apple laptops rather than the standard Dell computers, however our technology on-site host has no idea what she does when she looks like a mac.

  My problem? Everything is by default on the 24 GB hard drive. Because of the way these Macs are locked, I can't move anything in the drive of fusion of 1 TB without an administrator password.

  I would like if possible to change so that everything automatically by default on the merger of 1 TB drive. Is this possible? Could walk a person non-Mac through the steps to get there?

  Thanks in advance.

  Leave it alone and don't try to substitute the default values. The fuser unit is called a Fusion player for some reason, the two are merged with the software and will appear as a drive. If you have crushed you will need to consider in an Apple Store for repair.

• No light when I plug my extreme. Is there a fuse I can check?

  No light when I plug my extreme. Is there a fuse I can check?

  What model of AirPort Extreme?

  "Makes it look like a 'tour', or is it' flat ' and 'square' in shape?

  If it is "flat" and "square" shape, it would really help to get the model number. It's at the bottom of the device, probably incorporated into the base of carpet of MOSS. The model number starts with an 'A' follow-up of four digits.

• is there a fuse for this laptop? is the computer pavilion dv6-2150us laptop

  is there a fuse relpaceable on or near a pavilion dv6-2150us motherboard

  Is the power supply for the pavilion dv6-2150us originally?

  Remove the main battery and connect the AC adapter and try it turn. It is safe to do so.

  If that doesn't work try a hard reset as follows:

  Remove the battery and unplug the DC power adapter.
  Press and hold the power button for more than 15 seconds.
  Plug the DC power adapter (leave the battery for now)
  Press the power button

  Please post your positive or negative results.

• T420 without fuse bad backlight?

  I accidentally replaced with power cord connected screen (laptop computer has been turned off)
  I realized something burning when I saw the spark of the hd cable connector.
  The screen still works, but not backlight. I can barely see the image on the screen with the lamp.
  I ordered a new screen, same problem. So I guess that the screen might be allowed.
  I did a search online, it looks like I burned a fuse for the backlight.
  Could someone help me identify the fuse? Thank you

  It is not difficult to blow the fuse. On older machines with backlight CCFL, you would blow a fuse on the inverter, which is simply replaced. I do not have a Council T420 look right now, but since T410 and fuses used to normalize numbers, they are not. There are usually 2 fuses involved and both are physically near the LCD screen connector. (opportunity to F8 and F7) They can be under black plastic protective sheets. The biggest fuse 2 did the backlight and one more little 5 - amp is involved with LED icons on the bezel of the screen. I remove the card completely and check with a multimeter. You need good material to replace fuses on the map. It is a multilayer Board and uses lead-free solder that melts at very high temperatures. At a minimum, you need a preheating of quartz and a good infrared, temperature-controlled or recovery of hot air station.

• fuser error 1025

  I recently got a "fuser error" status notification of my printer HP LaserJet Pro CP1025NW. Nobody seems to know exactly what that means. HP has NO (typical) information except to reset the machine (power switched off/turned on). Most of "excluded" think I need to replace the fuser unit, but it has not listed anywhere (typical). A spark thought it was connected to the imager of drum, so I replaced that - a (of course) it does not solve the problem. I have probably to replace the fuser unit, but where to get the parts and how to do. Best estimate on a replacement is about $200 and another $200 having a 'authorized' technician install. I only paid $100 for the machine and it does exactly what I want. Fix for that kind of money or replace it with a new 'fantasy' is just stupid. Dead in the water after only 9 months of very limited use. Shame on you HP. If I can't find a reasonable way to fix this that I never buy HP.

  Device started to have some error fuser unawares. New unit, for 1 year.

  Took all the cartridges out, and then reinstall them. No joy.

  Finally, I read in one of the documentation HP black toner is related to the fuser unit.

  I replaced the black toner, and bam, error disappeared.

  I hope this helps someone!

• Change of fuse in Multisim print?

  Hello guys,.

  I met a problem when using the Multisim and Ultiboard (Version 10.1), I use a fuse in the circuit, but the footprint is not editable, when you do one annotation in front of ultiboard, I still need to change the footprint of the fuse. Does anyone have a solution to this issue?

  Thank you

  Toni

  Hi Toni,

  Have you tried to change the footprint in the worksheet view? Try to do this:

  1. Make sure that the worksheet view is visible in Multisim. Click view > view worksheet. By default, the spreadsheet view is down Multisim.
  
  
  2. Click the components tab of the spreadsheet view
  
  
  3. Click the tab of the footprint of the fuse to change
  
  
  4. Change the print window should appear and you should be able to change your footprint

  If this does not work, could you upload your design Multisim for us to take a look at?

  Hope that helps.

• cFP-DO-401 fuses and flyback diodes

  I use a cFP-DO-401 to command 24V solenoid.

  On
  page 4 of the Handbook of PSC-DO-401, it says to merge output with 1. 5A
  fuses fast action, that makes sense. But rather than put one online
  fuse on each of the 16 threads, anyone know of a fuse block or
  module which must be connected between the cFP-CB-1 module and the CFP
  bottom of basket?

  In addition, on page 8 of the manual, it shows that
  The cFP-DO-401 has inside flyback diodes, but then he says OR recommends
  using those outside. Why external are needed if the cFP-DO-401
  already has them?

  Mosey,

  Here is the link to that which is available from Digi-Key.  http://search.digikey.com/scripts/DkSearch/dksus.dll?detail&name=277-1569-ND Allen Bradley also makes a line of similar pieces.

• Detect the color of the fuses

  Hello

  I have an electronic card which has several fuses with different colors. I want to develop a program of LabWindows that allows me to detect if the color of the fuses is good or not. Can you tell me if Labwindows contains libraries for this work. What do you recommend?

  Thank you

  Of course, you can use it with LabVIEW, .NET and C (LabWindows CVI as well).

• HP LaserJet M604: 50.2F.11 fuser error

  This is a new printer with only 1400 impressions. I get this error: "50.2F.11 fuser error". I shutdown, unplugged the printer and restarted. The same error was generated. What else is there to do in addition to the replacement of the fuser unit? The warranty is through November 2016.

  I called HP Support, and the machine was still under warranty. They sent a technician to do the work. The error had nothing to do with the fuser unit. I've been a bad diet that feeds the fuser unit. I am always disappointed by the quality of Hp. My next purchase will be a Xerox.

• Printer HP Laserjet M601: HP M601 Fuser error 50.72.11

  How to clear fuser error 50.72.11?  I replaced the fuse and the rolders with a new maintenance kit and still receive the error message.  Please help.

  # Disconnect the power source...

  # chk for damage to the fusion & connectors LVPS unit

  # Refix fuser unit, ensure that this merger should in place.

  # Connect direcr raw power, if the power cable connected through protector of serge or UPS.

  # If possible to change the location.

  # Wait inactive 20mts.

  # Connect the power supply & chk...

  In my view, no problem with the fuser unit, if problrm presists change LVP (Lowpower supply)...

  Good luck...

  

• 5922 5124 fuse, spec of 5V @ 9 mini DIN at THE poles of output

  Cross posted, this forum seems more active...

  I can't find the specifications of the + 5V output current nominal (pin 1 to Pin 2 GND) on the scope of the mini-DIN connector cards (5922/5124) 9-pole

  Hi Hendrik,

  According to internal documents, the

  OR PXI-5922 - National Instruments
  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/201603

  Order number 779153-01

  use a 1.1 polyfuse for to THE + 5V (fused) pin.

  The

  OR PXI-5124 - National Instruments
  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/14231

  Number of the Oder 778757-01/02/03/04

  Use the same fuse with 1.1 next.

  Best regards, Stephan

• My Tower doesn't work, Ive changed the fuse, but still sound not come

  I don, t know if Ive blew the internal fuse if where is it so its an ADVENT t93003

  If you are not qualified to the computer hardware repair and troubleshooting, find someone who is and to enlist their help.  The process can get very frustrating and very expensive, very quickly.

• NEED PART NUMBER FOR DRIVE OF FUSER ASSY 5200

  Hello

  Nice day

  KINDLY HELP US TO GET THE PART NUMBER CAN BE ORDERED CPL (COMPLETE UNIT) PLAYER OF FUSER TO HP LASER JET 5200 PRINTER. IN THE OPPOSITE CASE PROVIDE US NUMBERS OF PARTS GEAR FUSER DRIVE SET THE QUICK RESPONSE WILL BE APPRECIATED.

  Hello

  Part number for LJ 5200 lie from this link,

  http://h20141.www2.HP.com/hpparts/SearchProduct.aspx?mscssid=8D31041AC1294897852887789830B5C8&SearchCriteria=Q7543A&sMethod=1&sRefAsp=Search_Multi_Product