Fusion does not work after reinstalling bootcamp

Similar Questions

• Jet 7 Tablet 5709: 10 Windows reinstall does not work properly; touch feature does not work after reinstalling HP sw

  I followed the steps of the http://h30434.www3.hp.com/t5/Windows/Windows-10-fresh-installation-on-the-HP-Stream-tablet/m-p/52038... to restore my tablet. The bottom line is - I use a keyboard and mouse, but tactile does not work, even after the installation of the various HP software specially required for the flow of data 7. When I start the Tablet, I can get the lock screen, but it cannot exceed.

  I tried to install Windows 8.1 USB, but I can't go beyond the screen who wants the product key. Should what product key I use? If I go back and reinstall Windows 8.1 the touch feature work?

  What can I do to get a running Stream 7 tablets?

  Hello Aberger,

  I guess that you have improved your 7 to 10 of Windows Workflow, but now you want to reinstall Windows 8.1, correct?

  If you went to go back beyond the 30 day trial period, you can use the image USB, you must have created 8.1 Windows before installing Windows 10.

  IF you have not done this media, you will need to clean install Windows 8.1 with Bing.

  You can not install ordinary Windows 8.1 copy unless you buy a new key.

  Machines that accompanies Windows 8.1 no longer a sticker with a key to the subject because the key is embedded in the bios. Installing Windows 8.1 with Bing will activate when he sees the key in the bios.

  During the installation process, you may need to click Skip to ignore entered the key until Windows has installed fully. If so, this will cause windows to enter a Limited State of Activation. When you connect to the internet to update, it will fully activate.

  You must contact the HP Support directly to the new copy of the installation media if you do not already have.

  Here is the link to contact...

  Contact HP worldwide | HP® official site

  Let me know if you have any other questions.

• Sync does not work after reinstalling Windows 7

  Sync works great between my Windows 7 Desktop and 8.1 tablet. The PC got a clean installation of Windows this weekend and now Sync does not work. I do not receive my bookmarks/history/etc on the desktop.

  -Two versions of Firefox are updated (40.0.2)
  -J' read the troubleshooting and installation FAQs
  -I am able to sign in sync on both computers
  -For the signature, I get a popup saying that Sync will begin momentarily and an e-mail notification. Nothing happens tho.

  I suspect that the problem is related to this 'new' version of Sync. I tried to follow the FAQ "Updated to the new version of Sync", I took off the two devices, I checked both are on the latest version of Firefox, but the next step is to create a new account to sync and it doesn't let me do, I plug my email and get "account already exists." What Miss me?

  The new profile created from the clean windows installed a fusion with other devices? Check the device to see if it retains profile data.

  Have you changed the password? This would stop all data from previous synchronization that was not local.

  If you go down this road of troubleshooting, the account must be deleted first. However to prevent data loss, you can click on remove account from accounts.firefox.com and then re - sign up.

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• WiFi does not work after reinstalling the system

  I have Pavilion dv6t - 6 c 00. I had to reinstall Windows 7 due to a virus. After installing all the drivers available from hp.com for my model, everything finally works but Wifi still does not (network controller shows lack driver even after I tried like 8 different). Here are the technical details:

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  Appreciate any help. Thank you!

  Hello:

  Download and install this driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• USB does not work after reinstalling Win XP Pro on P10 - 504

  Hi all

  I have problems with my computer laptop satellite P10 504 series, I recently had to reinstall windows xp professional on my laptop, and since I had no usb recognision.

  all devices (disks to flash memory, wireless usb devices) all show the power on the power light, but windows does not detect the new hardware, I reinstalled now twice thinking it was a faulty installation but not luck...

  OS: XP Professional SP2

  I have no recovery / tools and utilities cd since they disappeared, downloaded all the drivers from the toshiba website, even tried using the latest chipset drivers intel on the NET, but none seems not to work...

  Help, please

  any help is always appreciated

  Thanks in advance
  Rob

  Hello

  I think only 2 possibilities:
  1. the USB driver is missing on the download page. Then, you should contact Toshiba service.
  2. I found a Quick Fix Engineering Q822603 for USB drivers. Maybe by installing this will help.

  I'm sorry that I don't have a better idea.

  Good bye

• Qosmio X 870-button 3D does not work after reinstalling

  Hi all

  I like a nice clean install I always install windows me, that's what I did with my new Toshiba Qosmio X 870.

  I got everything to work. There are unknown devices not on the left, but the 3d laptop computer button does not switch to 3D. Instead, I have to rightclick the desktop > Setup NVidia > check / uncheck the box 3D.

  Being the lazy person I am I want to reduce the number of shares I must perform to toggle the 3D, so I want to restore the function of the 3D button.

  I found on the forums that I need to install the "TOSHIBA Remote Control Manager", here...

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=270410#270410

  but I can not find this piece of software anywhere.

  Am that I on the right track here? Or should I do something else entirely to restore the button?

  Hello

  > but I can not find this piece of software anywhere.

  You can find this software on the Toshiba UE driver page in the section of the Qosmio X 870 driver:
  [Remote Control Manager v 3.0.1010.1 for Win 7 64 bit | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 231 & selProduct = 7506 salt ShortMod = 3728 & language = 13 & selOS = 30 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 2 & ID = 82405 & O SID = 30 & driverLanguage = 42]

  You must also install all the other stuff to Win the Toshiba especially page 7 the VAP.

• Business app does not work after reinstalling Windows XP

  Original title: program programs application Applications compatibility

  I have an application that runs on the client computer with XP.  When I run the application, it will be all first authenticates the user by collecting the ID of the system that must be registered with the key to series given by the owner.  Once the registration takes place, then only, the application should open. Recently, I had to reinstall XP Pro (SP3) on my PC. Now, the same application when it is running on my PC with XP or laptop with Windows 8 with compatibility to XP, it does not jump the authentication window, instead, directly opens the application.
  Without authentication, the application should not open. What is the solution.

  Hi Santosh,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=windowsxpitpro

  I hope this helps.

• T41 - OSD does not work after reinstalling

  Hello community IBM.
  I have a little problem with my IBM T41 laptop. The reinstallation of Windows XP SP2 and completely reinstall the drivers for the machine as usual but the screen does not display the sound controls and light as always. Please help me solve this problem. I want to thank.

  Hello
  OK, so let's just summarize:
  you have the following:
  Power management driver:
  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-4GXPEG
  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-54520

  Driver Hotkey:
  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-38953

  Power management feature
  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-44226

  It is worth noting that most of the latest versions of the diet and Hotkey handler support is no longer your system, so please make sure you have the cersions above of the installed apps/drivers.

  For a complete list of all the drivers, that integrate with your system, please see this link:
  http://www-307.IBM.com/PC/support/site.WSS/product.do?template=/ProductPage/Landingpages/productPage...

  Let the mek now, if this makes any change.
  In case if it is also possible, please describe a little in detail, what you're exactly missing, because right now I guess it's the OSD, you usually see when you turn the audio up/down. (while making sure, that we are talking about the same thing)

  See you soon

• ProBook 4530 s sound does not work after reinstalling sound driver

  Hello

  Lately I noticed this weird sound while I was playing music or other sounds from my computer. It is difficult to explain what it sounds like but it was as if the distorted sound for one second every now and then, a little sound like a robot. I looked if I could solve this problem and found that reinstalling the audio driver should solve the problem. That's what I did, but after reinstalling and restarted my laptop it says "Nou Audio output device is installed" I made clear on the site of hp. For the moment, I have no sound. I tried to install an earlier version of the audio driver, but that no longer works. I'm sure that I have installed the correct drivers (I tried sp59291 and the sp57776 of earlier version).

  I don't know what version I have installed first.

  Additional information:

  -To install a new audio driver, I went to the Device Manager and uninstalled the current sound driver.

  -Manager At of devices under the IDT High Definition Audio CODEC there is a line called "Intel(r) Audio display.

  -In the Device Manager there is a yellow triangle with an exclamation to IDT High Definition Audio CODEC

  -J' have Windows 7 Home Premium 64 - bit installed, service pack 1

  I hope you can help me!

  Myxx

  Guess I have solved the problem, I uninstalled the audio driver, close my laptop computer and rebooted. It starts automatically install the correct driver. I hear that weird no sounds either!

• T61 sound does not work after reinstalling

  Hello

  I am re - install Windows XP Pro SP2 on many laptops.

  I have a problem with some T61.

  Installing the driver (found on the Lenovo Web site) is successful.

  Windows displays the audio icon, I can open it and change the volume, but I can't hear any sound.

  I'm sure it was working fine before the re-installation.

  I tried two ways:

  -driver install KB888111, then sound

  -driver install SP3, and then sound

  But none works.

  Do you have an idea of what I might have missed?

  Where can I get previous versions of the drivers?

  Thank you.

  Solved.

  The computer was cut after re-installation and the button above the keyboard did not work properly (I had to press really hard).

  Thank you.

• Windows Update does not work after reinstalling Windows XP due to the infection by the virus

  Hello

  I have a system of Windows XP with IE8.

  I can't get Windows Update to work. Just crossed another reinstall due to a virus problem and trying to get my operating system again.

  Any help would be appreciated.

  Thank you

  We need to know what type of CPU you have. Follow the instructions in Tricky again. You will see a window that looks like this:

  
  http://KB.Epson-Europe.com/PF/12/WebFiles/article%20Images/operating%20Systems/win%20XP%20-%202000/System_Properties_XP.jpg
  I suspect you have an AMD processor. If so, please read the following:
  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

  Microsoft Windows XP SP3 Upgrade utility for systems with AMD processors.

• Audio driver does not work after reinstalling XP on Tecra M9

  Hello

  After much fighting, I gave up. It's imposible to get my sound card upward operation on my TECRA M9 PTM91E, after I decided to renounce a cleaning by formatting the drive completely. My procedure is as follows:

  1 WINDOWS XP SP2 installed
  2. downloaded all drivers on another pc. Downloads of official pilot of toshiba site: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=ES
  3. install drivers in the correct order, following the instructions: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftedd-files2%2f0%2finstall-20070918164527.zip
  4 no luck when you try to install the sound card driver (download page specifies a built-in realtek) first try the suite version: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2f81.27.174.52%2ftedd-files2%2f0%2fsound-20071002102843.zip
  5 messed around trying the older drivers of other laptop TECRA M Series, luck is.
  6. has decided to map its just might not be a Realtek and tried other models on the download page: Sigma and Analog Devices Inc. tried those but come back an alert of recognition.

  Someone had this problem as well? My best guess is that it's just maybe a problem with the version of the driver...

  Hi guys

  I think I have an answer to your problems small software ;)

  The Tecra M9 certainly supports the ALC262 Realtek High Definition Audio.
  Compatible audio driver can be downloaded from the Web from Toshiba site or the Web to Realtek site.

  OK now to the solution

  The solution is very simple.
  You must first install the two XP patches; KB888111 and KB835221
  This must be done before installing the audio driver.

  Usually, this should solve your problem

• my keyboard does not work after reinstalling windows xp home addidion, it workrd for a short time but seemed to stop when I was in a session of powerpoint.

  When I look in hardware/keyboards, it confirms that a keyboard is connected, keyboard Standard.

  I susspect keyboard is u/s Strawberry is not another computer to try out it.

  Its aps2 not a usb connection.

  ?

  Hello
  It sounds like you need to reinstall the drivers for this keyboard. It is likely that when you reinstalled Windows, all the old drivers have disappeared as well. So, I recommend two things.

  First, visit the website of your computer manufacturer and update all the drivers. For example, if you have an HP computer, go to the HP site and find your specific computer it. Then download all the drivers that have been updated for the PC.

  Secondly, you may need to download the drivers for this specific keyboard. In this case, you will do the same as above. Go to the website of the factory (on the keyboard) and find this specific model. Then download the drivers

  I hope this helps. Just reply to the results.

• Wireless does not work after reinstalling xp family

  I use a wireless internet connection before the resettlement process but now when I do I can not connect. Pleasese provide instructions on what to do next.

  Hello.

  1. you receive an error message?
  2 have you installed driver adapter wireless network?

  Please answer these questions and tell us more about the issue, it could help us help you better.
  How to ask a question
  http://support.Microsoft.com/kb/555375

  Read the following article that may help you.
  To set up automatic wireless network configuration
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true