Fuze 4 GB will not recognize the change of information tracking

Similar Questions

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I lost my WiFi signal after having placed a time Capsule in the system. Now the Airport Extreme will not recognize the system. Any ideas?

  Any ideas on why my Airport Extreme will not recognize the system after the integration of the time Capsule in my system? Continues to have a flashing yellow light after trying all suggestions of technicians from the Apple Store and Internet provider.

  Since we don't know all what has been tried, we will have to start from the beginning if you don't mind.

  What exact models are your AirPort Extreme and Time Capsule? What is the brand and model of your modem Internet? I'll assume that Extreme is your "main" router and is directly connected to the modem by Ethernet... correct?

  Do you have the Time Capsule (TC) connected to the extreme, by wire or wireless? What is your goal for the TC? In other words, will not be used to extend the reach of the extreme wireless?

• Time capsule will not recognize the backup from another mac

  Time machine will not recognize the backup from another mac

  Time Machine will never find "another" Mac backups unless you've been backup that 'different' Mac on the same Capsule you have there.

  So, we need more information and to try to understand what it is that you are trying to accomplish. Please assume that we know nothing about what you could have done in the past... (since we don't have).

• HP dv7 will not recognize the second hard drive

  My HP dv7-2185dx running Windows 7 will not recognize the second hard drive, bios recognizes this Intel Rapid storage acknowledges.

  Main hard drive is a 1 to install a second hard drive to 500 GB.

  Hello

  Try the following.

  Judgment of the laptop and unplug the 2nd HARD drive.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this is finished, stop the laptop.

  Reconnect the 2nd HARD drive, then start Notepad and let Windows take over completely for a few minutes before checking if the reader appears in the lower part of the disk management window.

  Kind regards

  DP - K

• Try to burn a CD. The system will not recognize the blank disc or let me burn__

  Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

  Hello

  Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

  If no joy:

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Win 7 64 bit computer will not recognize the old jpg files since 2003 of the records that have been transferred to an external hard drive.

  Win 7 64 bit computer will not recognize the old JPGs from three 2003 files that were transferred to an external hard drive...  File appears in the directory but with no thumbnails icon. Does not open in the Viewer, Picassa, Ifranview, paint, PhotoShop.  I get conflicting messages... invalid image (Windows Viewer)... Unknown file format (IfranView)... Access has been denied (painting), a blank image (Photoshop),... You are not allowed to open this file (Picassa).

  Creation 2007
  Last updated on 2003
  2010
  Any help would be appreciated.

  Mahalo,

  Philippe

  Ran the Scan, the system is secure.

  I was able to bypass stubborn files to transfer them to a flash drive and copy them to another folder.  I was then able to access.  Somehow I messed up the permissions in the previous transfers of old machines and OS.

  Thank you for your help and attention.

  Mahalo,

  Philippe

• Trying to install Adobe Creative Suite 5 Design Premium, but will not recognize the serial number?

  I am trying to install Adobe Creative Suite 5 Design Premium on a PC but will not recognize the serial number? What should I do?

  I also have Adobe Acrobat 9 on my Mac and it is now saying that I have to throw "Adobe Photoshop Creative Suite 5 Design Premium". When I do that nothing happens with Acrobat 9, and it closes. I tried to reinstall the disk without success.  What should I do?

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

  Given that Adobe can't CS5, I think that above, is what it is

• Serial number problem: I am installing Lightroom 4 on my Mac, but the Adobe web site will not recognize the 18 digit serial number.  He wants more.  What to do next?

  I try to install 4 Lightshop on my Mac, but the process of license Adobe will not recognize the 18 digit serial number.  What should I do next?

  Adobe has no set of 18 digits.  It is perhaps a number of redemption.

  your serial number is a 24 digit number composed of 6 groups of 4 numbers, find the serial number of your product Adobe quickly

• Historical files Windows 8 will not recognize the new external hard drive

  I just bought a new laptop (Sony Vaio) with Windows 8Pro (System op 64-bit, Intel I7, 1THD).  One of the reasons is that I have approached Win8, is I liked the concept of the new 'File History' backup utility  I started to use the computer with an ext WD My Guide of the HD and the history of the files seemed to work.  Then the drive external hard went wrong and I just bought a new WD My Passport 2 t ext HD.  Historical files will not recognize this drive.  He keeps asking the old drive.  When I attached the new drive and go to the screen "Select drive", it says "no usable drives are detected.  Please connect a drive... "I know that the drive is there because I see under 'My computer' and I can copy files to it.  But the history of the files do not recognize.  WD, I called and they helped me to update drivers and even made a update firmware on the drive, but nothing is done.  I tried several fixes suggested in a few links Microsoft 'how file history works... '. «, «What to do if the file history works more...» ", etc, but all without success. The tech also remote BestBuy Geek squad my computer and tried EVERYTHING and could not get it to succeed.  BTW, it's not the HD post because put us on another computer to WIN 8 and Hx file found immediately.  Tech people thought that it was a deep registry with Win 8 problem and their only suggestion was to reimage my computer with the original recovery disk.  But who is going to cost me an arm and a leg.

  I'm not very tech savvy, so I know there must be something very simple, I'm do wrong or overlooking and I hope that some dear soul on this forum or someone from Microsoft can give me an idea or two.  Thank you very much

  I was having this same problem, but then noticed a presentation text easy to miss in the historical files tool that says that the disc "cannot be a part of a library" or something like that. In my case, I had files on my external hard drive that have been included in several libraries... and none that I really used, so I removed the files (and deleted the libraries for good measure). A fast system restart later, and my player does not appear.

  I don't know why MS did not propose it again for this thread as the more obvious thing to check, but there you have it. Something simple and quick to check that could save you some frustration.

• Windows will not recognize the password

  I have reset the password using windows live reset option, but now my laptop will not accept the password and I am more able to access the laptop at all. I don't know what else to do. Help, please.

  If you change the Windows through Microsoft Account password online, it will update when you connected to the internet via your computer and when the PC is turned off or disconnected from the internet, you need to use your old password.

• 13 elements will not recognize the default printer

  The program produces suddenly prompt say that it does not recognize the format of file (jpeg) or default printer.

  frankk23383559 wrote:

  The program produces suddenly prompt say that it does not recognize the format of file (jpeg) or default printer.

  Suggest that reset you the default preferences via the Edit > Preferences > general menu. Who can fix it.

  

• Adobe pro 9 will not recognize the .xlsx (Excel) files to combine documents into a single PDF

  I have yet to understand why Adobe pro 9 does not recognize the .xlsx files to combine into a PDF file. Need this problem solved quickly before our high season resumes. any suggestions? I know that you can save the Excel worksheet to a PDF document, but it takes too much time and space on our server. We must be able to combine the Excel file with files Post Script together at a time instead of going back to add more later. We are constantly updating of spreadsheets on a daily with the type of business that we do, you can understand why save the worksheet in PDF format updated every hour is a problem/waste of time.

  Thank you

  Brittany

  My guess is that you have OFFICE 2010 or newer. AA 9 PDF Maker that is necessary for what you want to do is not compatible with OFFICE 2010.

• Philips +/-RW DVD8631 will not recognize the drive

  Hello
  My computer specs are:
  Dell Dimension 8300. Multiprocessor PC ACPI. Intel Pentium 4 CPU 3.20 GHz 2 x Radeon X 300 series. ATA Storage Controller - 266F, Intel 82801FR SATA AHCI Controller, Intel 82801FB/FBM.

  My problem is that I filled my disk space and would like to burn files to CD - R or DVD-R for free space. I select the files I want to burn and ' move to ' the drive can burn data (Philips +/-RW DVD 8631). When I click on "Write these files to CD" it opens the Assistant when you type the name of the disk. I type the name and click "next". Then, I get a message that tells me that there is no disc in the drive. I used the software 'Identifier of DVD' which was recommended on the forums before, and it does not recognize the disc in the drive. I use DVD + R 8 x produced by "imation".

  If there is someone who can help, I'd be very happy. Thanks in advance to those that do.

  Thank you
  Ryujin

  Message edited by Ryujin9891 on 10/03/2008 19:35