Fuze causes problems with the new Gigabyte mb

I know this may sound weird, but with assistance from others and a lot of time to put into it, I found that the "rocket" poses problem with my new motherboard Gigabyte EP45-UD3R.

I was getting problems strange behaviors and reboot, flaky stuff.  Once I reduced to my USB devices I then reduces it to the "rocket".

Anyone know anything about this at all?

I would have given this another day before posting.  But I have the answer and it will go here.

In the BIOS with the EP45-UD3R (Gigabyte is not a brand off but very good Mo and has existed for some time - including Dell has used their) there is a setting under embedded devices.  It's called "Legacy USB Storage Detect". If this option is enabled it will attempt to boot from a USB device. The "rocket", like others, lights up as soon as your PC turn on.  It was trying to boot from the "rocket" and causing flaky problems.  Once that I disabled it the problem has been resolved.

I should have taken myself.  Arghhh...

Tags: SanDisk Sansa

Similar Questions

  • SEVERAL problems with the new X 34

    So, I have been active during the overclock.net forums concerning the many problems I am having with my X 34.

    Long story short, I'm back this thing to Newegg and waiting for another delivery. But I thought I'd come at least here because it has high liklihood to return to anyone who cares to Acer. I called their tech support to let them know about the issues, but when the old Indian robot for 2 years at the other end kept referring to as resolution of refresh rate, I decided that I couldn't take more.

    So I took delivery of the monitor yesterday and he initially worked well... but the longer he stayed, the more problems, he has developed.

    My system is one I built a year or two ago and works perfectly with my Dell 3008WFP. Video card is a brand new MSI 980 Ti Lightning. Operating system is Windows 10 x 64. Is a Corsair 750W POWER supply. 16 GB of DDR3 RAM.

    I even made a COMPLETELY new install of Windows 10 on this computer to try to resolve these problems. Did not work. I have disconnected/reconnected everything inside my computer, including RAM and GPU. Did not work.

    And Yes, G-sync is enabled in the NVCP. And Yes, I manually set the refresh rate in the NVCP in correlation with the manual settings on the monitor.

    Problem no. 1: Menu recording does not settings

    -Don't know what the problem is here. But for about 3 hours last night, my monitor would not save settings for serger refresh rate. I would go on the menu... allow the serger... Set it to 100 Hz... Select "Apply and restart. Then (here's the interesting thing I think in hindsight), the screen would flash many colors several times and restart. I assumed that flashing color was normal... but it was never the Predator Logo when it has been reset. The office is finally pointing upwards and I could choose 100 Hz in my NVCP... but when you returned from the settings menu, Overclock was Off back with the default refresh rate. I have nothing would fix it with the reset of the monitor and unplug. Later... I have unplugeed the monitor for 30 minutes and when I plugged it back in, it would save my overclock settings now. It is interesting, but now, when I selected "Apply and reset", he would show the Predator logo when restarting... this logo did not appear before.

    Problem #2: Flashing screen

    -See a video of this question HERE

    -This developed before my eyes. After the initial installation of the monitor, it worked fine. Without no flicker, no problems. But as I was sitting at the dinner table last night, I started to see the monitor flashing intermittently in the other room. I look at the screen, he flickered about 4 or 5 times per minute. For the next hour, he progressed to 30 - 40 times per minute. And subsequently developed in constant blinking. BUT this flicker only happens when I go to the Office at 100 Hz. It happens sometimes in games, but not constant.

    I first thought that I had a bad cable of DP since I used one from Amazon, if I swapped it for the Acer cable included. Nope... same problem. I even inserted my previous EVGA 780 TI... but the flicker that happens too.

    Then, I thought it was a driver problem, I did a clean install of the nVdiia previous drivers. Nope. Then a cleaning installed latest drivers from nVidia WHQL. Nope.

    Then I saw here that you can download the drivers for the monitor directly from Acer. So, I did a guy like an unsigned driver installation. Nope.

    After all this, the problem persists.

    Strange thing about this one is that there was when I first got the monitor but got progressively worse since I got it.

    Another weird thing is that if I have a window open, then it isn't twinkle... reduce the window, and he comes back. It's actually what made me think, it was a driver issue, but as you can see above, I think that I have ruled that that fully.

    Also, if I set my refresh rate to 95Hz or below, the problem occurs. (This is actually how I currently work).

    -UPDATE: the issue has actually started just after executing i1Profiler to calibrate the screen several times back to back. I can't imagine how, but could the rapid exchange of multiple colors full screen damaged electronics somehow? Or is it just a weird coincidence?

    -UPDATED #2: it was suggested that ADC can cause the problem as it caused problems with the previous Acer monitors. So I completely deleted i1Profiler and reset my default .icc profile. I also think that I figured out how to do a monitor factory reset - if you hold the buttons first and fifth, restarting the screen and all the default settings. in any case, does too and the blinking persists...

    #3 problem: Backlight horrible bleeding

    I have to type anything here? Leave some pictures to speak for themselves...

    Trouble #4: Parts of the screen does not not on

    It has been described elsewhere, so I won't detail it here. But yes, I have the same problem. Here is a representative of my monitor picture when the issue arose.

    Overall, I am extremely disappointed, although I can't say I'm surprised. I mean, we deal with Acer here guys... Not exactly known for the high-end products. You can put the red lipstick on a pig...

    So is there more any idea or suggestion out there?

    Until then... I'll wait for my new X 34 excerpt here from Newegg to see if I won the lottery of Acer he...

    I created this post to be a "accepted solution" to this thread with the purpose to help other users who need to find the answers. This should help to find this information faster than to have to go almost 800 posts to find pieces of information.

    Wake up from sleep (backlight) - initial response and follow-up

    Problems with Overclocking at 100 hz - original response

    Coil - Whine Original response

    Color banding - users in Australia reported the problem. The teams in the region to THE have been notified and a firmware is available.

    -Scanning lines Original response

    Thank you
    Cory

  • Dependency problem with the new Blackberry Plugin for Eclipse

    I just encountered a problem with the new version of the JDE Eclipse Plugin. I set up my application project so that it uses two other projects such as libraries. Both of these projects are on the way to build Java in the settings of the application project, and the manufacturer Eclipse compiles without errors.

    But when I try to run on the Simulator, the application loader throws an Exception stating that it could not find one of the classes listed in library projects. Since it is the importation of first class in the main class, I guess that it was unable to find the entire library.

    I tried to have the application project to import the project two library, but nothing alx files has changed.

    In the old version of the Plugin, there is a property of the project "Blackberry project dependencies" or something like that, which should be set for library and rapc.exe projects and the simulator would be their. That went away, and I was told during Devcon now suffice to add libraries to the classpath. Apparently, this is not so for me.

    Can you give me an indication of what goes wrong?

    The problem seems to be that I imported my projects since the previous version of Eclipse plug-ins, Blackberry. I have now created a new workspace and new projects, completely maintaining the source files, and it works.

  • z index / layer of problems with the new YouTube widget!

    Hello!

    I am facing a problem with the new 'youtube' of social media widget. I currently have two layers in my projects. This is a project for which the menu scrolls initially and then sticks to the top of scrolling parallax. By continuing to scroll, the embedded YouTube video widget does not scroll under the menu as it should but scrolls through the menu. It's strange, as the YouTube widget was placed on level 1 and the menu is at level 2. Shouldn't the menu then always be on top? Only the new widget is not properly defined index-z?

    You can check my web project (and look at the code) here: http://www.firstlight.at

    Any help is greatly appreciated!

    I managed to solve the problem, and I believe this to certainly be a bug in Muse...

    In order to avoid widgets Youtube iframed swim on top of all the other div tags, I had to change the code, add wmode = "transparent" and wmode = "Opaque" to the class of the iframe. This works if you replace all the other parameters behind the CBC "&" by "& amp"tag.

    Here's the original code generated by Muse. This could not prevent my "2nd layer" slip below "Layer 1".

    Makes the following changes to the code, forced the Youtube widget below all other div again (I pinned all changes to "BOLD", so you can see the changes easily):

    Ensure that you do not miss the following change: you need to change all of the vipers '&' to '& amp' this procedure will not work!

    After the new version, I'm sure the Adobe team is working hard to bust of bug last version. But I hope that we will be dismantled soon, otherwise users using the youtube widget will have to recode output Muse whenever we make a change and it is exactly what is the Muse striving to prevent (; After all, in Dreamweaver, you can hardcode the change and he would stick!

    I hope that it will be useful to someone!

  • Anyone having problems with the new iPhone LTE connection 7 on Verizon?

    I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

    (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

    (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

  • Problem with the new update

    Any browser looks graphically unstable and content is empty with the new update, is it just me or is just the update which is unstable?

    Hello

    Try disabling graphics hardware acceleration. You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

    Then perform the following steps:

    1. Click the menu button

      then select Options Preferences on Mac or Linux, or Windows.

    2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
    3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
    4. Now restart Firefox and see if the problems persist.

    In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

    This solve your problems? Please report to us!

    Thank you.

  • Problems with the new Macbook pro 15' maxed out

    Here's a quick post about my experience so far with the new macbook pro. I just got a brand new fully maxed out in spec macbook pro 15 inch 1 to SSD 16 GB RAM AMD R9 370 m GPU (set to automatic switching is not always) and a 2.8 to 4 GHz i7. I turned on and set it up which was nice and took 2 minutes. Then experience decreased a little when I saw an EST 05:36 hours of battery life remaining to 94%. So I loaded 100% and it is still 60% of battery life announced and no program running that I literally just signed a brand new machine.

    Then I tried to use the migration wizard to import a backup of my iMac 5 k so I can do everything on this clone for my laptop. After having successfully connected (he told me if my password for time machine was incorrect or not) it froze and did nothing, continue did nothing.

    Then place had to call support, was a guy on the phone in 30 seconds and I unplug and restart the machine time, always that same question so I transferred to a guy with "more training". The new guy I could say knew a little more and knew that I knew how to set my password or if I walked in their properly for a bit but they all have been set for the same password just for this. I created a second admin account called "test" under his leadership, and when the migration assist froze on this account, he was surprised and proceeded to transfer me off.

    I preceded to restore fully the machine into thinking that my account setup is causing trouble with the migration assistant, and it turns out that the closure of that laptop it can only continue to 'download additional components', while that connected for 30 minutes so all last night was wasted, and now I guess he's got 5 left 12 hours to download original 'things '. Keep in mind that I can download 5 GB in one hour... After he wake up this morning and ending up where I left it last night :/ he says 84 hours go, now 72 and 51 and it is not updated even once in seconds, it took 20 minutes to 84 minutes to 51, it's literally a day 2 reset extravagance or what? Just to download it I can only imagine the actual plant until I can install my programs.

    The cost of the laptop was about $3600 but paid ~ $2900 after headphones were included and $250 off for delivery to students and other issues on the agenda of the process itself that is not my complaint, what happens, but sitting with a new camera and support useless just to ask me if I can use actually tomorrow at this price are unacceptable.

    I would like to continue using it for a while.

    You can try to reset the SMC http://support.apple.com/kb/ht3964

  • Satellite U500-17F: problems with the new HARD drive

    Hi everyone, I got some troubleshooting with my Satellite and a new drive, I bought recently, because that is already damaged because of too many bad sectors. One is a Western Digital Scorpio Black 320 Bg (WD3200BEKT model number). It should be a fast reader but is not with my Satellite.

    After having mounted the drive in the laptop, I ran a new installation (with full disk format} Windows 7 (64 bit) with all the necessary drivers (that I downloaded directly from the Page of Support Toshiba.)

    The problem is that the laptop needs a lot of time to start and also to disable, and whenever I try to run an application or start a program (for example Firefox, or just a few windows applications), the laptop freezes for about 30 to 60 seconds, the drive no longer works (you can hear leaders put in position 'parking' and the HDD LED control is constant) ", no lights flashing).

    It seems that the drive (during this 30-60 seconds) in something as a stand-by mode. I ran a few Western Digital diagnostic tools and the car looks all right to 100%. It works also without any problems in the other laptop (HP Pavilion DV6500). Could this be a problem with the controller (Intel ICH9M - E ATA AHCI controller) driver?

    Any suggestion?
    Thanx

    Hello

    You use the latest version of the BIOS?
    Please check if you need a BIOS update. Of course I read in a few discussions on the similar question of Win XP you use Win 7 but its value to check the update of the BIOS and U500 series.

    In addition, I recommend check you the power of Windows 7 options.
    Disable in the power profile that you use power saving HDD.

    Just a question:
    You use the option AHCI in the BIOS?
    As far as I know it of possible to use either a compatible SATA AHCI mode.
    AHCI must be used because this option would use full SATA performance.

  • Problem with the new installation of Windows XP on the Satellite A100-259

    Hi all!

    I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
    I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

    I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
    I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

    (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
    (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
    (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
    (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

    Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

    Hello

    Seems that there are some problems with the standards of the partitions.
    A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
    It was very strange

    Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
    We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

  • A fix will come out for the problems with the new OS update?

    A fix will come out for the problems... the beach ball twirling, which began with the new update for the OS?

    Writing an effective question of communities of Apple Support

  • Pavilion Elite HPE-170 t: problem with the new HP DH16D5S DVD ROM drive

    My office is a HP Pavilion Elite HPE-170 t.  I recently upgraded from Windows 7 to Windows 10.  I have two HP optical dirives, one is a writer, and the other is just a DVD ROM  Both have always worked perfectly with Windows 7.  After you have installed Windows 10 continuous burner work very well works correctly with autoplay.  However, the DVD - ROM, HP DH16D5S, immediately began using autoplay.  Actually the drive was not yet recognized as a drive when you view the drives in the file Explorer.  Finally, it would seem, sometimes taking also longer than 5 minutes or more before doing so and then would work very well.  I tried different types of media, including music CD, DVD video and DVD software with the same results.  I assumed that it was a problem with the drive, maybe a bad capacitor, etc., which was originally not start correctly.  So I ordered a new DH160D5S, but which seems to have been a waste of time and money, because it does exactly the same thing as the original.  I even changed the cables autour between it and the burner, but it made no difference.  The burner still works fine but not DVD ROM.  I tried to find a more recent driver for it, but had no chance.  I found on a Dell website for this drive which was an update of the firmware for Windows Vista and Windows 7, but not for Windows 10.  I advanced and downloaded, but when I tried to run, I got the message: "your system does not meet the minimum requirements for this update.  Update has been canceled. »

    I want to try a different brand of DVD ROM, but would have to buy one without knowing if it would help.

    Any help will be appreciated.

    Since I posted this message I discovered that there is a driver problem with this DVD ROM.  There's no driver available yet to make the drive compatible with Windows 10.  Since then, I returned the drive and replaced by another brand that is compatible with Windows 10.

  • Problems with the new firmware 0.1.E.1.4

    Hello

    After the last update, my phone (Samsung Galaxy S3) has problems with his phone for headset support.

    I can only use the headset as headphones to phone for calls. Do not go with general audio profile.

    Sometimes I can connect audio but it disconnects quickly.

    It is a very serious problem that needs to be fixed, but I doubt that Sony will be releasing a fix quickly.

    So, how do I go back to the previous firmware? (0.1.D.0.6)

    With this firmware, I had no problem. The new firmware has a significant improvement as long as Visual but the helmet doesn't help...

    I need help. Thank you.

    OK, I just do a downgrade.

    I did a factory Reset on the helmet, downloaded "Update Services" and the program tells me that there is an update available, after the update has been completed I'm back on 0.1.D.0.6!

  • HPL2208w of the problems with the new laptop.

    Hello

    I have a 22-inch HPL2208w monitor, which seems to play on my new laptop Dell upward. The laptop has only a HDMI port, so I connect the monitor's vga cable to the Dell via an adapter.

    The display shows for a few minutes and requires only the range (I guess resolution) be changed to 1680 x 1650. For some reason I can't change the setting of the laptop to that. When I do not change the resolution (only if the monitor is unique and not dual output) the warning message remains on the screen and the screen is not at its best (wise clarity).

    Series Dell Win 7 64 bit, but the monitor was working on my previous Dell with the same version of Windows (with a VGA connection).

    Kind regards

    HA9005

    Hello HA9005,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you are having problems with the resolution on the HP L2208w 22 '' monitor and a Dell laptop. Unfortunately, as the monitor don't has no options that you can change in what concerns the resolution (it is passed by the laptop), I suggest that you try the Dell Forums for an answer.

    I know maybe it's not the answer you are looking for, but at least you know where to look for the answer now. Thanks for posting on the HP Forums. Have a great day!

  • Problems with the new Photoshop CC



    I am very angry with the new update of Photoshop CC can not finish a job, Send the picture and tell you what happened:


    just touch, created an envelope and I made a mask to lighten some points of the image and not a so masks Photoshop crashes.


    Since I've updated this version could possibly would never come to work as it should.


    Today, it is the third time I'm trying to finish it, and I'm not succeed.


    I tried to do everything to understand what is happening and after checking the Photoshop preferences and Nvidia card


    did no apparent problem.


    Also Photoshop in previous versions have always worked smoothly.


    I'll be able to go back to the previous version?



    Carlos Vilas!cid_A6A3C40595E04398B57EF2563DD9CC44@UserPC.png

    reset your preferences - https://forums.adobe.com/thread/375776

  • I have a problem with the new version of Photoshop CC 2015

    Hello

    I just installed the new version of Photoshop CC 2015. However I have proplem with this version. If I optimize the program, I will not be able to use all the tools, because everything is great, I don't have the problem with the old version.

    I hope for a solution...

    Go to Preferences > Interface > user interface scaling and see if 200% is checked.

    If so, uncheck the box and see if that fixes the problem.

Maybe you are looking for