Fuze doesn't recognize the MPEG-4 audio layer - any suggestions?

Similar Questions

• Canon 60 d does not recognize the 430ex II flash. Any suggestions?

  Canon 60 d does not recognize the 430ex II flash. On the menu screen, it says that flash is where not compatible.

  Any suggestions? Books or guides recommended?

  Thank you

  A few...

  I hope that you have verified that the flash lights up completely and you get the red light showing that it is ready to fire.

  On your system menu 60 d, if you find the "Flash control" option, you can ensure that you have not set the external speedlite to 'disable' - although I think in this mode, you wouldn't get the message you describe.  that is, I doubt it's, but you can double check.

  A more common reason for the failure is that the flash of the camera can perfectly communicate with flash.  This is usually due to a bad connection in the 'foot' of the lightning.

  The flash must be in place in the rails of the claw.  Make sure that the lock is released, fully slide the flash into the rails of the hoof, stop.  Engage the locking of the foot, so we got him firmly (it will slide to the right and then click sur-pour-snap (you must press the button to release the locking lever).)  This is not * only * snug foot... He also puts a tiny metal pin locking in a small hole in the claw so that flash can't get out.

  At this point, the "foot" of the flash is actually the "ground" connection and he is in contact with the metal rails of the claw AND the five contacts on the foot must be in contact with the camera.

  This means there is nothing wrong with the flash - and there could be something wrong with her.   So if you are convinced you fully secures the flash, then remove the flash and inspect the "foot" on the flash.

  The metal plate on the bottom of the flash must be strong... If you use your fingers and try to move it (do not use a heavy force... we do not break - just firmly grasp and see if he's going to move at all) it should not move.  If it does not move that this means that the foot is loose and is not attached to the body of the flash (there are four very small screws which hold it firmly, but they are accessible from the inside of the flash.

  Next, inspect the 5 metal pins on the bottom of the flash.  Each of these areas is spring loaded so that they will stand against the 5 points of contact in the camera shoe.  I sometimes saw a performance of something (for example, a bit of sand) getting stuck and 'jam' a PIN so that she she brings more contact with the contact on the hoof.  If you view the foot of the flash of an edge - on view, all the pins it is back to the same height.  If one of them is lower than the rest... indented it is blocked.

  The 430EX II has a solid reputation as a flash work horse.  It tends to be among the most reliable flashing on failures is rare.

  It is also possible that the problem is in the camera.  A simple test of this is to try an another speedlite (if you have one, or if you have a friend who has a).  If it's your speedlite, and it is under warranty, then it is probably a simple remedy of service Canon.

  If the flash is not under warranty and that the problem is with the hot-shoe is is not solid, it is often an easy repair.  If a foot have been irreparably damaged, the entire foot can be replaced (everything is a module) and it is an easy and I think a little low cost repair.

• Sansa fuze doesn't recognize the storage capacity all and does not load?

  My 8 gb sansa Fuze only recognizes about 400 MB and will no more. It is just over a year and has worked well before. Nor my sansa fuze or clip will hold most any kind of a charge. The clip is about 2 years old. I recently bought a new computer and I am running windows xp. The two sansas stopped working after I tried to load them into my new pc. What could have caused this and how can I solve this problem? Thank you.

  You can have a file in there that stifles the Sansa, wielding Media update. If it gets stuck, hold the power button and keep it for 20 seconds after the screen turns off.

  Your update is probably spent the USB mode to automatic detection, which will be a PSG connection if it detects Windows 10 or 11 on your computer - but XP comes with WMP 9 unless you have updated, that would send Auto Detect Meteorological Service of the Canada in the event where it is not working properly.

  I suggest reloading the firmware, just in case. Search in the firmware upgrade instructions near the top of the first page of the forum force MSC for the upgrade.

  Then choose a mode - MTP or MSC, depending on what you are used to - rather than the automatic detection function.

  And if it remains stuck, while you are using MSC run Error Correction. Right-click on the drive, properties, tools, error checking. He might find a problem file.

• Windows Media Player doesn´t recognize the subtitles on my movies

  Windows Media Player doesn´t recognize the subtitles on my movies

  Hello

   
   
   
  1. what operating system is installed on the computer?
  2. If it works well before?
  3 did you changes to the computer before the show?
  
   
  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  
  Method 2:
  
   
  Follow the steps mentioned below:
   
  (a) open Windows Media Player
  (b) click the game menu, point to lyrics, captions and subtitles, and then click the applicable.
  
  Reference:
   
  Show or hide the menu bar in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/show-or-hide-the-menu-bar-in-Windows-Media-Player

• I have a folder of files in local folders that keeps reappearing after that I erase it. I tried to fix the folder several times. Any suggestions?

  I have a folder of files in local folders that keeps reappearing after that I erase it. I tried to fix the folder several times. Any suggestions?

  This is the name of a folder? Who will be in a file name in your file system. Given his situation, is it possible or likely that the total path length exceeds the limit of the operating system?

  For example: http://windows.microsoft.com/en-gb/windows/file-names-extensions-faq#1TC=windows-7

  This is not to talk about any other limit which may be inherent in the way that Thunderbird uses names of files internally.

  In your position, I explore the Thunderbird profile and check paths, as they appear in the file manager. You should be able to remove all folders that are unwanted here also.

• I deleted two e-mail accounts in my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?

  I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?

  Please see that.

• PowerMac Pro doesn't recognize the MacBook Pro in target disk mode

  I'm trying to restore a disk from MacBook Pro from a backup, but my PowerMac Pro does not seem to recognize the MacBook Pro in target disk mode.  I have a FireWire 800 cable and adapter to the thunderbolt FireWire 800 port.  Is there something more I should do to get the Mac Pro power to recognize the MacBook Pro in disc mode target like an external hard drive?

  There is no "Power Mac Pro;" are you referring to a Power Mac (which would be less than 11 years), or a Mac Pro? You try to migrate data from the MacBook Pro to another Mac, or vice versa?

• Firefox doesn't recognize the new printer.

  I installed a new, second printer and makes it the default printer. I'm also using the old printer. Firefox does not recognize the default printer and only works with the old. How can I get Firefox to work with the new printer? I use the latest version of thanks and next...

  When you print using {Ctrl + P}, is the new printer available on the printer - name menu drop-down?

• System doesn't recognize the serial number to register warranty

  I bought my Toshiba A10 satellite with international warranty and its serial number is 26126026H, and now when I try to register my laptop with the standard warranty and internatioal, it gives me an error that it dosent recognize the serial number...

  What continues... After spending a lot of money... now I'm not in the mood to do the headaches...

  Help, please...

  You could try the free

  Belarc Advisor.
  When you run it, you will see your serial number in the top right. Check if it is the same thing.

  It will give you as much more technical information about your computer, its status of safety and what you can do about it, including the key codes for Windows products.

  Post edited by: exseadog

• Vista Home Premium doesn't recognize the Iomega Floppy Plus 7 in a reader

  Are there drivers updated to Vista Home Premium OS install for install / will recognize the IOMEGA "Floppy Plus 7 in a Card Reader USB?  I can only find Windows XP SP2... don't worry!  PLUG-AND-PLAY does not load the appliance.  Help!

  Franell,
  Thank you for visiting the Microsoft Answers community forum.

  Have you tried to install the driver for your device in XP compatibility mode?  You should be able to right click on the file and select Properties, then click on the Compatibility tab.  Here are more detailed instructions:

  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  Unfortunately, your device is not listed as compatible with Vista, so it may not work.  You can find Vista compatible hardware and software by visiting the center of compatibility of Vista here:
  http://www.Microsoft.com/Windows/compatibility/

  You can also use your favorite search engine and search the Internet for "Vista compatible floppy drive.

  Let us know if we can provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Comptuer doesn't recognize the password, will not open Windows XP

  Recently spent a computer on the network to use domestic and now it does not recognize my password. Deleted some files network but on sign-in, it says that the server does not recognize the password. Cannot go beyond the login screen and it offers no option to bypass. Is there a way to get around this? Tried to start SafeMode but get the same login screen. Maybe I deleted some files network changing for a House count. (the unit is 6 years old). Help.

  He was part of a network that no longer exists. Could open XP by using a different password, but the original no longer works. Am trying to have deleted all of the network files.

  Thank you

• Virtual PC on MacBook Pro doesn't recognize the Firewire Port

  I'm trying to run a Windows-only based software (Adobe Visual Communicator) and plug my camcorder via Firewire to my PC virtual VMWare Fusion.  However, the PC does not recognize the Firewire port when the camera is turned on. I have the correct cables, I can see the camera from Mac OS.  Please share thoughts or ideas.

  Sorry, but you're out of luck.  At this point, NO virtualization software is able to firewire devices to their guests.

• I just upgraded to Windows 10 and opaque CC freezes at the return of the use of plug-in NIK and On One.  Also, it does not recognize my upgrade catalog backups.  Any suggestions?

  Hi, I have just updated to Windows 10 and now Lightroom CC freezes after I edit a photo in NIK Dfine and try to send the photo in Lightroom.  When I rerstart Lightroom, the returned file is there, but freezes Lightroom is I try to do anything.  In addition, Lightroom will not work with my previous backups of the catalog.  Any suggestions?  Thank you

  Hi stevec.

  Please go the Edit option in the library Module, then go in the preferences.

  Go to the performance tab and uncheck the option "use graphics processor.

  Restart lightroom, and then see if LR works.

  Please let us know if it helps.

  Kind regards

  Tanuj

• my windows media play player music differentlly all a sudden.it sounds a bit like the chipmunks. Anyone have any suggestions on how to make it normal again?

  all of a sudden my music somewhat sounds like the chipmunks. A few days ago, it was beautiful, but now is not. its windows media player 11. any suggestions on how to fix this?

  all of a sudden my music somewhat sounds like the chipmunks. A few days ago, it was beautiful, but now is not. its windows media player 11. any suggestions on how to fix this?

  ==============================
  Sounds like Chipmunks...

  If you have a Realtek Audio Driver...
  This can be caused by the karaoke
  settings in Realtek Sound Effect Manager.

  Go to the control panel and open Sound
  Effect of Manager / sound effect tab...
  Karaoke set to + 0

  More info...

  Using the sound effect Manager
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00377375

  The card Realtek HD Audio Driver user manual
  http://UK.TS.Fujitsu.com/RL/servicesupport/TechSupport/boards/soundcards/RealTekHDA/hd_audio_driver_usermanualver1-00_0418-05 [1] .pdf

  Why my music sounds like chipmunks sing?
  Troubleshooting Audio playback in Windows Media Player problems
  http://www.cybernetman.com/kb/index.cfm/fuseaction/home.viewArticles/articleid/96