Fuze freaked - out and fixed

Similar Questions

• Update CC 2014 on the Mavericks. Now, I get the message "your computer restarted due to an error". When I try to reboot, my macbook freaks out and the screen goes black or I get pink and blue pixels. Help!

  I have no idea what to do now. I have a MacBook Pro running OsX 10.9.5

  uninstall all cc, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 and then restart your computer.

  If that solves the problem, install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe

  Test your computer again.

  If no problem, install a program of cc using the desktop application.

  Restart your computer.

  If no problems, proceed with the installation of programs cc.

• I bought 50 weeks to Go on my iphone and my cpu it always says I'll run out and have only the 5 GB, I had originally. They are the same accounts and idea how to fix?

  I bought 50 weeks to Go on my iphone and my cpu it always says I'll run out and have only the 5 GB, I had originally. They are the same accounts and idea how to fix?

  Have you tried signing off iCloud desktop and then signing again? If you check on the phone, does show the plan 50 GB? Are you sure that the two devices are signed on the same iCloud account?

• After freaked out power, my mouse pointer is frozen on the top left of my screen. I disconnected all devices and it is still frozen

  After that my electricity freaked out when I try to restart the computer, the mouse pointer is frozen in the upper left corner of the screen. I rebooted several times and it is still stuck. I also unplugged all devices. Any suggestions?

  Boot safe mode and test.

  https://support.Apple.com/kb/PH21875?locale=en_US

• I can't change my ip and dns address. I can't change, but on reboot it was greyed out and (obtain addresses automatically) how can I fix?

  I can't change my ip and dns address. I can't change, but on reboot it was greyed out and (obtain addresses automatically) how can I fix?

  This happened after the execution of virus / malware scans and found some. The supposedly fixed it, but now I can't access the internet. It still works on my local network.

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps from the link below

  http://support.Microsoft.com/kb/299357

• Why my iphone4s connects to my wifi? He stopped abruptly. The switch has greed out and will not go.

  WWhy won't my iPhone 4s to connect to my wifi at home? The button is grayed out and will not go.

  It is often an indication of a hardware failure. Try to restore it in DFU mode and set up as a new device. (do not restore the backup again. This is a test)

  If that doesn't fix it, make an appointment at the genius bar to your Apple store. You will need to either replace, or buy a new phone.

• iPhone 6s more screen freaking out/no answer

  My iPhone 6 s more about 2 weeks ago and I have this problem that after having unlocked the phone or after a time random usage display freaks out or just not responding. I lock and unlock the device, and I hope that I can use it for a few minutes. I noticed that it often freaks out after the use of 3D Touch, but even in this case, the problem appears. I did the reset with and it did not help. I also did all that apple wrote on their website. I wonder if it's a hardware or software problem. It's very annoying and I'd appreciate any help. I was eager to make my iPhone after fight with android and now I'm pretty disappointed. (And Yes, my screen is nice, clean and dry)

  Take the test/diagnosis. There is really no way to diagnosis remotely your question. I suggest a visit to the store rather than to have to lose you time trying things that might or might not help.

  Barry

• Do these programs like Registry Mechanic and fixit work... they are safe to use...

  Sir/maam respected,

  There are many programs available these days that we say and promise to optimize our pc and speed up our system and clean our registry and software problems...

  Do these programs like Registry Mechanic and fixit and stuff really work... can we trust them... they are safe to use...

  programs like windows silverlight and a few others which are categorized as optional when we update our windows... I noticed that these programs use a lot of RAM and my ram before use be only 34% in case of use therefore is gone up to 80% with these programs running... What do I suggest me to do... .as ram more its slowest use... my pc as it is necessary, or just an option... kindly help...

  Yours sincerely,

  These programs like Registry Mechanic and fixit work...

  Hello

  Registry Cleaner that claim to be able to set a large number of errors are all hype, snake oil that will be most often
  cause more problems while not fixing anything.

  RAM is intended to be used, the rest doesn't matter. In fact, Windows 7 hidden advances as well as RAM is
  used more efficiently.

  ================================================================

  I do not pretend you need to check the performance of your system however if you want to
  so to use this resolution to fairly complete performance issues.

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 updates. Important updates options are grayed out and unable to change

  I am running Home Premium Windows 7 and in Windows Updates settings, I chose "check updates but let me choose whether to download and install them". This worked well until about two months ago, when I stopped to alert me to fresh updates of messages. Now, I find the options in "Change settings" under "Major updates" are greyed out and I can't change them.

  Any advice would be appreciated. Would prefer to have the same option, I'd settle for automatic installation.

  Thanks in advance.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Is their a utillity built in Win program. 7 who can clean up old files and fix broken paths.

  Is their a utillity built in Win program. 7Pro, 64 bits that can clean up old files and fix broken paths.

  as far as I know is that windows sold out a 2 TB HDD for back ups in less then 2 months.

  Their is nothing wrong with my computer, just for maintenance.

  Hello

  Thanks for asking this question to Microsoft Community.

  I understand you want to get information on all the built-in options that would take care to clean out old files and the broken computer shortcuts. I'll help you find the right options.

  Windows 7 has these options for maintenance, namely disk cleanup, Disk Defragmenter. These options should help.

  Check out these links:

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=DBWRBkU74qm

  Important: all by performing the check disk on the hard disk, if bad sectors are detected and if it tries to repair this area, all available data on the risk of being lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also run the fixit from the link:

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows

  For reference:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  In addition, you can use your search engine preferred for all third-party utility which will help recover additional space on the hard disk.

  Third party link WARNING: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• USB not recognized problem, it worked fine before, then update iOS to 6 is out, and when I plugged it in iPad after update, started having error shortly after.

  I conducted an audit of file, the disk check, you click on uninstall the driver in Device Manager and went as far as reinstalling Windows (I sell the laptop) and still have the error! Someone help me please correct.

  It was working fine before, then update iOS to 6 came out, and when I plugged it in iPad after update, started having error shortly after. I tried to install and unistaling software from apple, and as I said, I even reinstalled windows. always error.

  Hello

  Method 1:

  I suggest you to run the fixit from the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  Method 2:

  Step 1:

  In Device Manager, check whether the USB controller appears as working properly or have a yellow on her exclamation when the device is connected. Look for error codes as well.

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Step 2:

  Check if the device is recognized on another computer.

  Hope this information is useful.

• Lightroom 1.4 android have to log out and log in to access the collections

  Since the upgrade to lightroom v1.4 mobile on Android, I have to sign out and then sign back in to access my collections.

  In earlier versions of my collections are accessible immediately.

  I can not connect to I don't have a network connection.  This makes the application useless when you are away a network.

  Any suggestions?  Is this fixed in a future version?

  Richard

  This has now been resolved by improving my Tablet Android 5.1.1 Lollipop.  It was previously running 4.1.2.

• CSV to send reports and fixing dates

  I am trying to create a script that will send different reports. From now on I'm only instant reports and SCSI hardware, but I intend to add to my script once I learned how to get the current things to work properly. I wish I could create a spreadsheet for some of the data I receive and fix the spreadsheet to my email that I create. This is the code I have right now:

  $scsiLog = "C:\Users\myself\Documents\ScsiLogTest.csv".
  $rows = @)
  Get - VM | Get-SCSI controller. {ForEach-Object
  $row = $_
  $os = (get-VMGuest - vm $row.parent). OSFullName
  $row | Add-Member-type NoteProperty - name-value $os OS
  $rows = $rows + $row
  }
  $scsiReport = $rows | Select the Type, Parent, OS | Export-CSV $scsiLog

  $snapshotReport = get-file-vm name. Get - VM | Get-Snapshot | Select Name, VM, @{n = "Size"; e = {'{0:N2}' f $_.}} SizeMb}}, created. Out-string
  Send-mailmessage-to 'E-mail'-'email' - 'server'-'$snapshotReport, $scsiReport' body - SmtpServer topic 'Test report '.

  When I run that I am able to get the instant passage of my report to work properly, however I am not able to get the SCSI report to create a worksheet and attach it to the email. I know the portion of my code SCSI works fine if run by itself and does not seek to generate a mail so the problem is probably where I'm trying to use export-CSV $log.

  If you want to have this file as an attachment, use the attachment setting.

  Something like that

  Send-MailMessage -Attachments $scsilog -From "email" -To "email" -SmtpServer "server" -Body $snapshotReport -Subject "Report Test"
  

• Please help me, last night I partition my macbook pro, el capitan, and when I try to open my windows via bootcamp I can't access most, blue screen out and my laptop closed.

  Please help me, last night I partition my macbook pro, el capitan, and when I try to open my windows via bootcamp I can't access most, blue screen out and my laptop closed.

  How do you partition the disk?

  This is what app or OS that do you?

• Spam folders are grayed out and not available for the transfer of spam

  Spam files are grayed out and will not be able to transfer by e-mail in my Inbox on my iPad and iPhone. Why can't I move spam in my Inbox to the spam folder so my spam filter learns what is spam? I have to go on my Mac computer to make a transfer.

  Hello. You use the built-in iOS app Mail? Your e-mail account using POP3 or IMAP to receive messages? Check the account settings so not sure.