FYI: AX100 with Sony ECM - GZ1M Multi Interface microphone

I took the microphone ECM-GZ1M cannon. My AX100 try to better isolate the sounds from subjects in front of the camera and found an interesting problem. So that the microphone. works in the firearms and zoom modes (and turn it off turn internal mic so it should not be removed from the device), you can set the audio level in the menu. the option is disabled when the microphone. is on. It can be chosen for the internal MIC or an external mic, but not a connected mid.

It resembles programmed audio assumed that we would use something like the XLR adapter (which has its own level control). If the microphone. works very well with automatic level control, but no manual control is possible (as firmware 3.0; it is not in the list of changes for 3.1 but I have not yet tried).


Tags: Sony Products

Similar Questions

  • Stereo microphone, Sony ECM-XYST1M and camcorder DCR-TRV103

    Looking fot an external microphone. The stereo microphone, Sony ECM-XYST1M will work with the Sony DCR - TRV 103 camcorder?

    the ECM-XYST1M requires the foot Multi Interface and will not work with this camcorder. The ECM-CG50 is compatible.

  • Error is 0 x 80131604 missing when message burnig a bluray with Sony DVD architect 5.2

    Original title: error message is missing 80131604 0 x

    This is the message I get when burnig a bluray with Sony DVD architect 5.2, the process of creating my bluray stop when this message appears.

    all solutions? Thank you.

    Hello
     
    I suggest you to consult the section troubleshooting steps and check if it helps.
     
     
    Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    I suggest you to contact Sony support site for assistance.
  • Export DNxHD with 8 channels audio multi... Problem! the final file only stereo all mixed with 6 empty strings.

    I export DNxHD with 8 channels audio multi... My problem is that the final file all mixed in the first 2 stereo channels with the channels empty rest 6.

    I'm lost on what could be the problem.

    The main audio channel is 8 channels... NO stereo.
    Export, I chose DNxHD and audio 48000 Hz with 8 output channels


    What could this be? I need to deliver a film with the 8 mono channels.

    Really appreciate all the thoughts/help!

    Thank you

    Christian

    That's how I would implement mixer in CS6's using a sequence of 8 track with 8 mono channels (mono channels using maintains levels matching, stereo and standard tracks can cause differences in level of 3db). Note the Red output channel selection and the panpot position indicated in blue.

  • I can't find com ports in Device Manager. Trying to interface with a counter digital multi via a RS232 connection.

    The software supplied with the meter has enough summary documentation.  When I tried to open the software, a window pops up saying that the port com 1 cannot open. I used baud rate settings that the software manual recommends but no help. Then, I uninstalled the COM ports. Now they are gone and I don't know how to re - install.

    UPDATE: I've read elsewhere that the BIOS should have the com port activated, so I went into the BIOS and of course it was off. I suspect that it is off all the time, because the software failed to connect to it when I first installed it. As soon as I have it set to com 1 everything works.

  • Why Canon does not have old adapters for my SLR camera lenses? I can get them with Sony, but not for Canon

    I have an old Canon Ftb with a goal of 1.4 fd. I'm getting into digital cameras now (just to have a 12 G for now, mainly used for underwater photography). I would like to stay with Canon, but I'm very annoyed that Canon doesn't have a way to continue to use their old lenses. Nikon, for all their flaws are much better at you can continue to use your old stuff.

    Then I find that if I'm going to Sony (Yes, really, Sony) can I use my lenses from Canon ol via an adapter. This my Canon, tell me it ain't so. You must have a way, I just have not yet discovered.

    There are many challenges with this and the "adapters" are to be considered with a certain scepticism.

    The FD lenses are mechanical - no electronics.  The case of the unit, on the other hand, has an electronic interface for the lens - nothing of mechanics.   This means that if you set the goal, you would have to manually set the aperture but also of manual focus of the lens.

    Your Canon DSLR had a split Prism focusing in the viewfinder to help.  A new camera does not work.  The reason why there is no help from the development is because most of the lenses are autofocus so it is simply not necessary.  This makes it particularly difficult to tell when you've worn exactly the goal.  Making it even more difficult is that any device with a sensor size of APS - C (most of them) have a small viewfinder that you had on your Canon SLR photography.

    In addition, the lenses are optimized for a specific back focus distance.  Canon's EOS cameras have a depth of 44 m from the mounting flange of lens at the front of the body at the level of development within the body.  When you use an adapter, it modifies that distance.  If you change too much, the lens behaves as if it is mounted with extension tubes, the entire range of focus is moved closer to the camera, and it can be is no longer able to focus to infinity.

    There are 3 parties that make these lenses... conversion kits but they do them for a few drinks (not all) and that they require a bit of surgery on the goal (e.g. this level which protrudes beyond the rear of the lens used to set the aperture value should go).

    But... the modern lenses are just so much better than the old FD lenses.   Requires really quite the dozen FD lens to make it interesting this fuss.  Also, I own a Canon SLR (AE-1) and a few glasses of FD... but have no interest in trying to use one of these lenses on my EOS DSLR cameras.

    I think that this question almost as Ford asking why they do not wheel adapters let wheels it T model mount on a Mustang of 2015.  The new wheels are so much better than the old wheels, you want to continue to use the old wheels.

    Leave your old lenses in the past.  Mine are on the shelf alongside my AE-1... body as a conversation piece.  I don't actually use them.

  • What is a multi-Interface Mode?

    .. .and how can I update with the API. Is what xml tag?

    Thank you

    OK I found it.

    When you add a network with one org, it creates the bridge on board for you but sets:

    true

    You need to upgrade to:

    fake

    Once you do this, you will see that your edge gateway now has a check in the column Interface Multi Mode.

  • Cannot receive multicast on a host of network multi interface

    Can someone please help?
    I'm not able to receive multicast on a host of multi network interface.
    This is the code:

    public class LegacyMulticast {}
    Public Shared Sub main (String [] args) throws IOException {}
    Group InetSocketAddress = new InetSocketAddress ("224.10.20.30", 12345);
    NetworkInterface iface = NetworkInterface.getByName ("eth3");
    MulticastSocket socket = new MulticastSocket();
    socket.setSoTimeout (5000);
    socket.joinGroup (Group, iface);
    Byte [] b = new ubyte [4096];
    Datagram DatagramPacket = new DatagramPacket (b, b.length);
    try {}
    Socket.Receive (Datagram);
    System.out.println ("Success");
    }
    {} catch (SocketTimeoutException ste)
    System.out.println ("failure");
    }
    socket.leaveGroup (Group, iface);
    }
    }

    The funny thing is that when I run this code, Wireshark detects IGMP join on the correct call joinGroup network interface, followed constantly UDP traffic to the correct port I have to receive and finally I see correct IGMP leave caused by call leaveGroup and UDP traffic stops.
    I just do not get anything on socket.receive appeal.
    I'm trying to understand this one for days now. Pls help someone :)

    P.S. I thought to security, but call System.getSecurityManager () returns null.
    P.P.S. I also tried to implement this IAN, but with the same result.

    Group InetSocketAddress = new InetSocketAddress ("224.10.20.30", 12345);
    NetworkInterface iface = NetworkInterface.getByName ("eth3");
    MulticastSocket socket = new MulticastSocket();

    MulticastSocket socket = new MulticastSocket (12345);

    You don't listen to the correct port.

  • Work with sony m2ts files makes cs4 lag

    Hi all

    My system: PC - Intel Core 2 DUO 3 GHz processor with 2 GB of RAM (E7500) - audio usb interface Lexicon Lambda - NVIDIA GeForce 9800 GTX + video card in windows xp pro service pack 2. First pro cs4 version 4.2.1. I went through the steps described in the "Guide for a question of efficiency" and per the instructions, I have included links to the results DXDiag, MSINFO32 results and screenshots of a couple of screens in Process Explorer:

    E2 http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cYTVjNWEwNTktMTEzZi00ZmUyLTk5MTgtZWQxZTUxMzNhYz & hl = en


    http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cYjQ2ZGY2Y2EtZmQ5Mi00ZGFhLTlkYjgtYjZiODIxODg1Nj Yz & hl = en


    http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cOGExNzc0ZGItZjkzZS00MTkwLTk0MWQtYWZmODYyYTg2MD cy & hl = en


    http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cZjI2MDFlNDQtYTJlYi00MWE5LWFhYTYtYTk5YjY0YmY5Ym Mw & hl = en


    http://docs.Google.com/leaf?ID=0b-VxJq-F9J_cNzlkYTYwNGYtMDBlYi00OGQ0LTgwMDItZTJiMGJjNDYyNj kw & hl = en

    I use sonys picture motion browser software to get the raw files off a Sony HD camera and on my hard drive (a separate physical disk from the operating system drive). I shoot the m2ts files in my project and as soon as I have a m2ts video in the timeline and play it, the sound will start but the video will lag, showing the same frame for 15-20 seconds before jumping awkwardly to another frame. If I let the video game latecomers worsens and the audio quality will start to deteriorate to the point where the voice sounds like they are fed through a pedal distortion guitar or something. I found that if I go to edit > Preferences > Audio hardware and set the default device back to 'First Pro ADM Sound' and then right towards "Lamda" ASIO it sort of "pop", the sound card and the clip will play smoothly for a few minutes until the video starts late and then the audio starts degrading to the distorted voice and I go 'pop' sound card again. Depending on the size of the project I am working on I can just to do this just once or twice during a shift of 8 hours and other projects (like today) I have to do every couple minutes.

    I don't know that I've left something so feel free to pull him out with additional information you need.

    Thanks in advance,

    Brandon

    Hi, Brandon.

    Just recently, I deal with a similar situation from my Panasonic AVCHD camera and the box that I had just did not have the ponies to treat. I have since bought a new box that is more reasonable, but I also put in place a step in my workflow.

    Because I'm only producing a standard def output, my first step is to convert the files .mts of my camera SD files uncompressed via a program that Panasonic provides for this purpose. This gives my release of performance system much more to work, because I'd rather have my box burn CPU cycles on reading, rendering, etc. to chip away the extra bandwidth that I don't need the HD source material.

    Initially, I found that my lower power box treat reading an AVCHD video line, but when I started layering multiple video tracks playback would stutter, cough and the direction the nearest pub. This technique made me all night with this box in anticipation of a new arrived, and of course puts less load on the new box as well.

    Hope this is useful and fun!

    Chris

  • Linksys AE2500 is compatible with Sony adapter to use on a DVD disc Blu - ray BDP-S370 player?

    Linksys AE2500 is compatible with the Sony adapter for use on an of DVD disc Blu - ray player BDP-S370 to connect to a wireless network?

    Hello Jaime,

    Only the UWA-BR100 wireless LAN adapter is supported for use with the Sony BDP-S370 Blu - ray disc drive to connect to a wireless network. Sony has tested the adapter LAN USB UWA BR100 and it is guaranteed to work with the BD player. Adapter USB LAN wireless from other manufacturers may work, but Sony has not tested the and as a result, operations are not guaranteed.

    If my post answered your question, please mark it as an "accepted Solution".

  • HP Setup crashes with a runtime error for interface C309-m software

    I am running Windows 7 64 bit.  All operating system updates are installed.

    I need to update the software to interface with my printer HP Photosmart Premium C309-m.  The current software is out of date.  I can't start the scan from the printer, and only my account on the computer recognizes that I have a printer.  Several analysis diagnosis on the State of HP Scan Doctor tool that some software components seem to be missing.  The printer itself seems to work very well.

    When I try to update the software C309-m via HP Print/Scan doctor, software downloads, extracted, then runs and crashes with a runtime error.  The error box comes from the Microsoft Visual C++ run-time library and the crash of Setup runs is the appdata/local/temp/7zS3DA1 directory that I seem to have several similar directories that were not cleaned from previous installation attempts.

    Any suggestions on how to get a successful installation of the C309-m software would be appreciated.

    Hi Ken50,

    I would recommend selecting the Uninstall_L3.bat.

    Please let me know how it goes.

  • problem with sony XCL-C280

    Hello world

    I'm struggling to acquire images from a sony camera XCL-C280, I use a framegrabber to the NI PCIe-1430.

    I had to make my own camera file using the camera file generator (see attachment camera file, I had to change the extention of the CIM to txt to view it) and I think that I am not to far from a working solution.

    When I use MAX, I could only to get images if I disable the standard controls (on the tab 'Attributes of the camera' MAX), but if I leave the standard activated, controls when I either try to initiate or dumpster I receive an error "the requested series termination string is not found in the buffer returned."

    And I have exactly the same get LabVIEW, if the series controls are enabled, I get: "-1074397038 took place in Start.vi IMAQ - or the possible reasons: NOR-IMAQ: chain series requested endpoint not found in the buffer returned." and when I disbaled the series command I can acquire images but I sen can configures the camera via series controls more...

    Can someone help me with this problem?

    Thanks for your reply Joseph!

    No, the XCL-C280 must have "OK\r" as the chariot of the termination, I read the manuals of the XCL-C280 and one for the XCL-5005CR, these 2 cameras actually have a different endpoint... funny tank as it may seem.

    I have disabled commands series Max (and then realized it's a setting in the camera file "SerialDisabled (Yes)") and then it all works in LabVIEW, which is what I really want.

    I thought that disabling command series would then send commands to the camera using the series IMAQ write VI, but this is not...

    Do you know what he does at all?

    CIM joint working (renamed with the extension txt) file

    See you soon

  • QUESTION of HANDSHAKING ULTIMATE PLAYSTATION 3 WITH SONY TV (help)

    Good guys & gals, have a crack at it. I very much hope that one of you knows how to solve this problem. I've owned a 60 GB Playstation 3 since 2006-2007ish. When I bought it I was not the owner of a HD TV and played SD (standard definition). But played very little at a time. Obviously if I wouldn't have known about future issues, I would have picked up the ps3 at the time. Fast forward to mid-2008, I work at best buy in Home Theater and the SONY XBR4 out. I sell the crap out of the TV, because supposedly it is the best HDTV on the market at that time. I end up buying a (40 inch Sony XBR4) at the same time. Now for my problem...

    Just to throw out on the table before I start, I tried everything I can think of. I spent countless hours on the internet, forums, YouTube, trying to find people with similar problems, or even people with different problems in the hope of finding a solution that would work. I called Sony 3 separate times and talked to people who barely speak English, and they all tell me to try the same things I've already tried... Here's what I tried...

    1.) first of all, my Xbox 360 works fine - it is out of cable box HDMI in my television. Perfect unity of games Microsoft HD 1080 p + Telvision Sony = HD works well. Funny actually. Let me add, that the Xbox 360 works very well to ALL HDMI port on TV. All 3. Then unburnt HDMI port on the TV.

    2.) second, my Playstation 3 is not working/handshake / connect via serperate OR same HDMI cable in my television. No. 1080 p either. It does not work in one of the 3 HDMI ports on the TV. However, the cables provided with the ps3 (red, white, and yellow) work very well. 3.) my buddies the same 60 GB Playstation 3 connects to my TV, through the same HDMI cable (I have several cables and even tried the Xbox cable included) and works absolutely perfect. So then who leave television out of the question, that could be the problem.

    4.) next, I thought of course that maybe my PS3 has a bad hdmi port. So I brought my Samsung HDTV parents down and kicked it with my Playstation 3 and tv recognized the my Playstation 3 right now and I was playing in HD on their TV very well.

    Many people at this point, would probably ask, "well when you had your red, white, and yellow cables, are you in the playstation 3 parameters (the hdmi cable connected to tv as well) and to try and switch to hdmi 1080 p mode? ' and answer this question simply, Yes and YES. I tried this many times.

    5.) I tried all options on television as much as to try to make sure he would take the ps3, I tried every possible on the playstation 3 to option that it could display on television. Whenever I turn the playstation 3-screen 1080 p HDMI is empty, and I wait 30 seconds so that it is shown again in SD.

    Here are some of the other things I've tried, and what Sony has suggested:

    6.) unplug everything (TV, Playstation 3, HDMI cables) wait a few minutes so that everything be not fed, not connected, disconnected and reconnected everything back in. Nothing, of course.

    7.) now the button of reset for several beeps, and the playstation 3 to come to a menu with 6 options (it's been a few months that I even turned on the stupid thing so I don't remember all the options), but I tried pretty much all possible options in this menu. In my view, it was as if restore the ps3 is by default... still nothing.

    8.), I tried to format the playstation 3, did nothing.

    9.) I have tried to update than the playstation 3 to the latest filmware upgrade, yet have nothing in HD.

    10.) I tried several HDMI cables and all ports on TV.

    I think I tried on 10-20 more things, I forget at the moment. I should have posted long ago, but I spent a few days doing nothing but the search for a cure for this, or physically to play with all the options between the TV and the ps3 and have never found a solution. I usually give up after a few days of trying really hard and come back months later. There is no way to enjoy a Playstation 3. I'm a big fan of Sony, and it's very disappointing. I have a bunch of Playstation 3 games, I want to play bad, but I don't want to play any of them until I can play in HD this IS THE REASON I BOUGHT THE CRAPPY SONY TV, SPECIFICALY for MY PS3, lol.

    So here are the facts in simple terms. My PS3 - HDMI - MY SONY TV = does not work... My XBOX360 MY SONY TV = - HDMI - works great! ......
    Friends the same PS3 - HDMI - MY SONY TV = works great!...
    My PS3 - HDMI - SAMSUNG DIFFERENT TV = works great!

    Several cables HDMI = work only
    Try different HDMI ports on the TV = wont ' work
    = Factory settings restore does not work
    Reformatting = does not work
    Unplugging everything & waiting = work only
    Just after connecting the HDMI cable & turn on PS3 = work only
    Upgrade to the latest filmware ps3 = nothing - does not work

    I don't understand, I can repeat myself, but this was VERY frustrating, and Sony is not help. Now the PS3's long warranty I know, and I don't know if Sony is going to do anything. Everything they have done so far is gave me a confirmation code, to give to someone else. I spend a lot of time waiting, and I'm tired of talking to the guy who barely speak English. My final thoughts, before you click on send, what are it's probably some sort of handshake problem. Of course my TV and playstation both work nice work on Matt opposing separate. It's funny how the 2 sony products are those who have problems, and my opponent (xbox) product works quite well. The only other thing I can think of is a possible upgrade to the TV (see if sony has updated filmware for my build of television.) if someone is smart enough to take a crack at this, and you have to make dates and stuff, I take a look. I hope that someone has had the same problem and found a solution, because I've exhausted all the options that I see, and I like to consider myself a person with a fairly good knowledge on the technology.

    I would be absolutely more than grateful for someone who can solve this puzzle.

    -Bradford

    Hello Bradford,
    If you have tested HDTV with another device like a Blu Ray player or cable box, press the power button. If he goes out either device then control HDMI turns and handshake is underway.

    Even if it works with another brand television, try the following steps on the Playstation website.
    http://us.PlayStation.com/support/answe... m? A_ID = 262

    Finally, if this doesn't help not here's the link to the forums Playstation, your request will get users of Playstation of entry, as this forum is mainly for electronics consumer and VAIO.
    http://community.us.PlayStation.com/index.jspa

  • Problem with SONY DCR-DVD650. Unable to get the finished videos transferred to my computer.

    Hello world

    I have a Sony DCR-DVD650... I also use the mini DVD - RW for recording.

    When I put the DVD in my computer, or you are trying to access via a USB cable connected to the camera, however there is no videos. I can clearly see the videos in the preview of my camera...
    I've also developed videos...
    Solution Explorer displays a single folder which is DVD_RTAV which includes 3 other files 'VR_MANGR. BUP', 'VR_MANGR. IFO' and 'VR_MOVIE. VRO.

    What I am doing wrong? And how to get these videos on my computer to be able to
    Change them. Help, please! Would really appreciate it, thanks

    The basis of the record that you have seen inside the disc, you saved your footage in [VR mode]. The DVD_RTAV folder that you found inside the disc is indeed the folder that contains your images, and you can go ahead and copy the contents of this folder. The more you can do with these files is to find a software that will be able to read. It is not possible to change them on a computer.

    To ensure that you will not work in this problem next time, please save your videos in the standard [MOVIE mode] instead of [VR mode]. Once you have done so, you will find your images in a folder named [VIDEO_TS], and you will be able to copy and modify these files.

    If this post answered your question, please mark "accept as a Solution.

  • Problem with the generation of multi-sinus wavefrom of random phase using PXI-5412

    Hello

    I am trying to generate random phase multi-sine waveform using the PXI-5412 14 bits 100 M/s AWG on LabVIEW8.0.

    The version of LabVIEW8.0 for the PXI-5412 comes with a sample VI on multi-tone waveform generation. When I tried with a different combination of frequency and amplitude, there is no problem with the sample VI.

    Because I need the phase to be random for each frequency component, I had tore the tone cluster containing 3 elements, i.e. frequency, amplitude and phase, which feeds the generator of signals, and rebundle the cluster with elements of reading a CSV file by using a loop, a fixed value amplititude and a number of random phase of the frequency generated by a random number (formula lournies elements (: pi - 2pi x r). When the waveform multi-sinusoidale generated on the PXI-5112 100 MHz Digital Oscilloscope, it was pointed out that the waveform would change with the tested frequency range.  However, the amplitude of the wave is always ~1.4V (guess that's always default to 1 V x sqrt (2)).  There is no question also when testing the same combination of frequency and amplitude by using sample VI without modification.

    Please find attached the VI of the sample, snatching up to the version and the CSV file I used. Is there something wrong with the table 1 d of the cluster of 3 elements that I built and assembled causing the signal generator to ignore the value of input amplitude and, possibly, the input value of the same phase (as it seems that the amplititude is always set to the default)?

    The other question that I found on the two sample VI and ripped version is on the news of sampling.  The waveforms appear on digital Oscilloscope PXI-5112 always default to 10 cycles no matter how changed the sampling frequency and the number of samples.  For example, if the frequency is 10 Hz, sampling frequency is 1000 Hz, and I put the number of samples to 10000.  I'm supposed to get 10000/100 = 100 cycles.  However, I could see 10 cycles no matter how, I changed.  What should be the correct way to change the number of cycles?

    Really appreiciate your help and advice. Thank you.

    1 phase unit is in degrees (-180 to 180), no - pi pi.
    2 standardize Waveform.vi always normalize your amplitude of the signal. You can remove it to use your desired amplitue, but must make sure that it is not above 5412 spec.

Maybe you are looking for

  • Installation of the HP Officejet Pro L7780 all-in-One

    HP Officejet Pro L7780 all-in-One Windows 7 64 bit Hi, I have downloaded software from HP in order to install my printer. For some reason any installation fails and I would really like to help. Step by step of my installation procedure-> I run the pr

  • Color Laserjet 2605dn: duplex printing with UPD

    The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab. Is there a way to enable or

  • error: 0 x 80280007 after installilng Windows Essentials Beta

    OK, so I recently installed the new beta version of Windows Essentials without problem, but I would like to start up messenger every time I'd get an error (don't remember what it says). Anyway finally just Messenger stopped working altogether. Then,

  • Restoring to factory default with the propeller? a windows 8...

    Something was wrong a bit strange with the winodows 8... and I want to return to the default installation of factory of course there is a partition for this... How do it? the boot?

  • Updates to continue to operate when the laptop is turned on...

    My daughters acer continues to run a Mircosoft Windows Vista update for hours. It is in stage 3 of 3 and has 90% complete. To counteract this, we cannot have on the desktop or the controls. We have installed active anti-virus (trend) software. Help