G:\ is not accessible. Access denied.

I have been able to get this drive to work on Windows XP Home edition and even a Mac from Apple, but every time I try and use it with Windows 7, I get the above message. I tried it on 3 computers different all equipped with Windows 7.

Please help because the drive contains all my music!

The drive is formatted in NTFS?  I ask because if you use it with a MAC it can also be FAT32.  If it is NTFS try the following:
 
See if you can take possession of the car.
 
After that, if you can see files but still have access problems it may be necessary to also change the permissions.

Sorry, its an external hard drive of 80 GB. Made by Sumvision.

Tags: Windows

Similar Questions

  • Drive external drive is not accessible, access denied.

    My computer (Win7 Home Prem) ran chkdsk after an update of windows, probably triggered by ccleaner or glary utilities. My external hard drive was plugged during the update, reboot and chkdsk. The chkdsk command probably checked my coz external HD, I can see folders/paths that were there. The next day I couldn't access my HD due to a mistake, saying: it was not accessible and access is denied. I searched online potential solution and tried the following without success, and they have been applied using an admin account and an admin cmd.

    * Change the permissions and ownership, but the property always says it's impossible to determine the owner.

    * Changed the share permissions.

    * Do you have 'takeown' and a 'icalcs' has changed owner but same error.

    * Check the disk management, drive seemed ok with the letter drive and all.

    * Ran chkdsk /F on both of my C: drive and external hard drive, both completed successfully without error during the analysis and not found bad sectors.

    * Program of Unlocker used to check if player was running another process, found nothing.

    In my computer, it shows the letter drive and NTFS, but not bar showing free space. Properties would show 0 free space / used. Here I can go to cmd and access the content from there. I used the function of 'Explore disk' of glary Utilities and I could see the content and even run mp4/avi files in the player. So I guess the drive and its contents is ok, just that I can't access it through normal means.

    Thanks in advance!

    Rob

    Hi LeBlanc,

    I apologize for the late response and can certainly understand your concern. I appreciate your efforts. As you mentioned that you are not able to access the external drive, and you receive the error of access denied when you connect to your user account, I suggest to try to create a new administrator user account and then try to access the external drive.

    To create a new user account, please follow the steps mentioned in the link below:

    http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

    Please let us know if the problem persists.

  • E:\ is not Accessible - access denied

    Hello!

    Dear all,

    I had a problem.

    I had brought some changes in the properties of the "Local drive E:\. "by going to

    Properties > Security tab > allow / prohibit the access Option

    At this point, I chose all deny options and has applied. But after that, now I can not even access I have admin m & a message appeared;

    E:\ is not accessible

    Access denied

    I would like to deny access for non admin users keep privacy drive local (e).

    your kindness in this regard will be highly appreciated. Thank you!!

    Hello

    Follow the steps below to remove the genuine users.

    Right click on the E drive and select Properties.

    In the window appearing in the above screen shot click on change.

    Once you click on edit, you will see this window.

    In this window, you must select the authentic users, and then click on remove.

    Hope the helps of the steps. We know the result.

  • C:\Users\jason wald is not accessible - access denied

    They gave me this computer by my cousin - jason wald. I changed the username to mine, but I get the error message

    now the messages. The title of this e-mail is one of them. Another is

    parameters is used by another program

    There are

    a program on your computer has corrupted your default search for IE engine

    There are

    an add on to this site couldn't comoriano

    and then I get a message that Acer Data Security Management is having problems.

    I downloaded M alwarebytes and Spybot in Mode safe (having helped by advice from this site because I could not download normally. It turned out that there was a Trojan horse and a worm. I can't do a system restore because - as I found it - the system has always been infected so far.

    Also, I don't have any disks to renew the backup system!

    Help!

    Thans - Chris

    Hello

    It is always a good idea to reinstall the operating system when you get a second hand computer

    Here are the different ways to reinstall Vista

    Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    ____________________________________________________________

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    __________________________________________________________

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    ____________________________________________________________

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • I have locked my hard drive and now get this message: D is not accessible access is denied.

    drive hard access denied

    I put the password on my hard drive in windows 7, then I deleted windows 7 and installed windows vista but now when I try to open locked hard drive he said D is not accessible access denied, what should I please help

    Delete all partitions "including the small 100 MB system reserved partition' can install Vista.

    -Partition management utilities-

    Partition Wizard Home Edition: (use the bootable CD version)
    http://www.partitionwizard.com/free-partition-manager.html
    Note: There is also a CD bootable or versions of the bootable Flash drive:
    CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
    Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
    Among the features and functions: create partition, Delete partition, Format partition,.
    A partition resize, move partitions, Partition recovery after an accidental deletion,
    Convert the partition, partition Explore, Hide partition,
    Change the drive letter, a partition active Set, Explorer (content display) of the partition.
    Note: To run any task (such as deleting a partition) use the "Pending Operations" box at the bottom left.

    Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
    EASEUS Partition Master Home Edition (free):
    http://www.partition-tool.com/
    Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
    Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
    It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

    J W Stuart: http://www.pagestart.com

  • c:\ drive is not accessible access is denied

    my hard c:\ drive is not accessible access is denied my restore says system c:\windows\system32\rstui.exe the parameter is incorect I can't change my account I can't download need help

    I fixed it myself without access to drive c and with finding my lost vista cd.  I partitioned a space on my 2nd hard drive were I have installed windows 7 rc that I could find. then I completely lost my vista at startup program but was finally able to access the c drive was I changed the owner and reset the permissions {sweet}, then I downloaded the vista startup and repair cd {freebie} rebooted from the cd, he fixed the restarted start menu and was able to see my vista who temporarily lost started it and I ended up controll full return it downloads updates etc. just as it has done before my vista nightmare now, everything has been left a hard drive #2 I copied everything that was on the vista partition and it moves on the drive c in its own new folder then reformatted the drive d {drive #2] which left me with a clean drive were I was able to bring back every thing and worked.} I ' m sure that there was probably an easier way, but being able to find my vista cd and have very limited access to my vista program there were no alternative short bought another operating system and lose everything that I already had on my computer. "  6 weeks waiting for a response time was bad enough

  • Every time I try to acess this partition appears that q:\ is not acessable, access denied.

    Every time I try to acess this partition appears that q:\ is not acessable, access denied. When I try to go on propieties and security it shows me that I'm not aloowed to access and I need the permition. So, when I try this appears current owner: uneble to view the current owner and when I try to change the current owner appears an error indicating that uneble to change the current owner, attentive refused. PE of Hel me please! I already have a few boughy this laptop!

    There was no acess in safe mode and the local drive Q:\

    This means that the disc is created by a third-party software that you have loaded yourself, for example a RAM disk or an encrypted volume.

  • Q player said... Q drive is not accessible access is denied

    Why drive drive Q say Q is not accessible and that access is denied? The player says it's "Office Click-to-run".

    I went to uninstall click to launch the program, it cancels them at the end and click to run the Application Manager gives the error message

    I tried to uninstall all Microsoft Office Office Starter. But none can do.

    I can't use the Office Starter either. It gives an error message 'Click-to-run configuration failed. Please e-mail me at * address email is removed from the privacy * thank you. Pamela

    See this thread.
    http://answers.Microsoft.com/en-us/Office/Forum/office_2010-office_install/what-is-the-q-drive/4b98ad88-B3F0-4362-B315-1a7bfbf7e4f0

  • c: / is not accessible. access is denied.

    Hello

    I have problems with my diet and I finally pulled money to replace. After you install the new power supply, it starts up and I tried to access my C drive. He came up with the following error:

    "C: / is not accessible." Access is denied. »

    I tried allowing the hidden administrator but has not yet been able to give my user with permission to access the drive.

    Any help is very appreciated.

    Hello

    Thanks for the post.  I suggest you refer to the suggestions in this article.

    "Access denied" or other errors when you access or work with files and folders in Windows

    https://support.Microsoft.com/en-us/KB/2623670

    Please get back to us if the problem persists.

  • E:\ is not accessible access is denied

    My CD and DVD drives are not accessible under one (1) of our user names. All are directors. They work very well and very well with other users (3) autoplay. Device Manager indicates that he not there no problems. I run fix - it, and he said that everything is fine, except that the media are unreadable. I tried several different discs in the two discs and get the same disk error in fix - it. The disks will work perfectly under other user names.

    I'm puzzled. Help me please.

    Hello Urbchguy,

    Thank you for your message.  It is possible that the profile has been corrupted.  Let's try the following:
    Connect to your computer with one of the admin accounts that works properly.
    Click 'Start' > click 'My computer' > navigate to the following folder:
    C:\Documents and Settings
    Rename the problematic profile to add _old after profile.
    example: C:\Documents and Settings\jsmith_old
    And then disconnect and reconnect under the problematic connection.  A new profile will be done, you can then copy the 'old' profile data to the new.
    Please let us know if it did or did not help to solve the problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • «Location is not available ~ access denied»

    When I try to open a variety of files in Windows Vista using the offers, I get the followiong: ' there is no location ~ access denied»  This occurs when you try to open the following files only: data of the Application;  Cookies; Local settings; My Documents; Network Neighborhood; Neighbourhood of printing; The latter; Send to; Start menu and models.

    These are the points of junction : hidden, protected operating system files that are not supposed to be accessed by users.

    Each of them points to a folder that is accessible to the user:

    Application data - C:\Users\\AppData\Roaming
    Cookies - C:\Users\\AppData\Roaming\Microsoft\Windows\Cookies
    Local settings - C:\Users\\AppData\Local
    My Documents - C:\Users\\Documents
    Neighborhood Network - C:\Users\\AppData\Roaming\Microsoft\Windows\Network shortcuts
    Print neighborhood - C:\Users\\AppData\Roaming\Microsoft\Windows\Printer shortcuts
    Recent - C:\Users\\AppData\Roaming\Microsoft\Windows\Recent
    SendTo - C:\Users\\AppData\Roaming\Microsoft\Windows\SendTo
    Menu - start C:\Users\\AppData\Roaming\Microsoft\Windows\Start Menu
    Models - C:\Users\\AppData\Roaming

  • < drive >: \ is not accessible. access is denied.

    Hello

    I created a VM installed vm tools. so I decided to add a disc more to the system (windows 7 x 64 bit).

    When I format the drive. disc is created and formatted normally but when I want to access it, watch somehow I have no right.

    user with which i m trying to access is domain administrator and UAC is disabled.

    I deleted this record and created another, same scenario. I can't access the created disc.

    any ideas?

    Since you in a field, there are group policies restrict your access?

    Perhaps you could use diskpart to verify if the drive is in read-only mode?

    My drive is read-only, help! -Ask the Core Team - Site Home - TechNet Blogs

  • SQLFire: Failed to start and then can not close-"Access denied" & "could not start the"sqlfire"database

    I ask a question, expanding to another thread 'http://communities.vmware.com/message/1884835', on the start-up and stop SQLFire.

    My topography has four servers, two locators, and two servers (Server 2 SQLFire each) on which the database is deployed.  When you start the batch, without no history running, all right.  Adding and removing servers in the cluster, also seems to work very well.  However, when the whole of the system, its stopped by sqlf shut-down-all, it starts up, things go wrong.

    I met the same problem described by the called thread, that is, it seems to be an addiction to data - which is not resolved.  I start locators first, one at a time.  When one starts, data dependence becomes apparent.  The Locator seems to start, but the sequence goes in a loop around the data dependence.  When you try to stop the same Locator, he returned in a "stopping" State, where it does not recover.  Try a reboot, translated by [A SQLFire Locator works already in the directory "C:\SQLFire\Locator"].  The "stoppage of sqlf Locator", producing a further: "timeout for SQLFire Locator at the stop, the status is: SQLFire Locator pid: 4956 status: stop ' results; and the "sql shut-down-all:, throws a long error that includes:" java.io.FileNotFoundException: shut_down_all.log (access is denied) "and 'Could not start the 'sqlfire' database'. '.  Both of these appear to be the crux of the matter.

    I don't know what data it is dependent, because I haven't added all the data that will be persisted.  However, the system starts with default records.  I tried to check if these default disks are required, which seem not to be and I'm leaving for the partition and replication information, to read when the system starts / begins.  I can't understand why locators cannot start without the database, without any dependence on the data, and also why the system seems to require a sequence to start.  Is that not the purpose of SQLFire, i.e. a solution supporting the cross, which can be started in any sequence of old?  If an operator needs to get this bad, for a production system, should be that the entire solution be recharged from external sources, and that could take awhile.  It would seem, once the system in this state, i.e. the dog chasing its tail, he doesn't get, and I have to delete all the bookmarks and servers and launch all to reboot from external data sources.

    I'll be dilly, or is it a problem in general, experienced by others?

    I would be grateful for any comments, and if you could indicate the respective documentation, as I struggle to establish a correlation between the problems of documentation, even Google hits, when it encounters any problems with SQLFire.

    I appreciate your time and efforts.

    Hello

    I checked the docs and they are not accurate on information in Windows when using the cmd shell. The ampersand does not work correctly when called from a shell, Cygwin, or on UNIX/POSIX systems. Will get corrected.

    Please, use the start command to start in the background of a single command window / batch script:

    beginning of "locator" cmd /c sqlf locator...

    beginning of "server1" cmd /c sqlf server...

    etc.

    Add option/min to start the minimized for example windows cmd start 'locator' / min cmd /c sqlf locator beginning...

    Or launch each 'start-up of the sqlf Locator', 'sqlf-start server' etc to separate windows command prompt.

    Thank you

    Felicia

    Post edited by: SumedhWale

  • internal drive shows in computer science, but "is not accessible.

    After that chkdsk on a usable internal drive, I used 'Start' - 'computer' the drive icon. I get "F:\ is not accessible - access denied. When to use disk management; the disc comes with.

    3 basic GB 1397.26 drive healthy (primary, active Partition' in the block on the left and the right block is completely empty.) I want to get it even if I have to reformat.

    Fixed - had to remove thedisk drives and reinstall all the cables - they reappear and were usable at the next startup.

  • After factory reset, download C:\ is not accessible. Access is denied.

    I did a factory reset on my mini, I am the admin, but I get the message c:\ is not accessible access is denied. For this reason, I can't remove all bloating provided with the computer in my office.  Help please.

    HP mini 110-3015dx
    1gig 32bits
    processor Intel atom n450 cpu
    Windows 7 Starter

    Have you tried to use it as an administrator?

  • F:\ Is not accessible. Access is denied.

    Recently got an infection (6 according to Malwarebytes), which has disabled the Task Manager, command prompt and something else.

    They have been resolved, now my problem is that I can't access my external hard drive.
    I tried to change the shared options, security, just said is not accessible access is denied.
    Its file system is NTFS but when I chkdsk, he wrote his FIRST and received 0 bytes when it currently has 800 GB on the disk.
    Please help, I have attached some newspapers and hijackthis.
    I don't want to lose my data (cost me $500 for the bandwidth to download all the files located on the hard disk). Thank you!

    Hello

    1. What is the brand and model of the external hard drive?

    2. connect to the administrator account and try to access the external hard drive?

    Usually the access denied error message is related to permissions. If you do not have sufficient permissions to view the file/folder/drive you will get this error message.

    See the link.

    http://Windows.Microsoft.com/en-us/Windows7/what-is-an-administrator-account

    Change the permissions for the drive

    See the link.

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

Maybe you are looking for

  • HP ScanJet 7000: HP Scanjet 7000 deleted partition

    Hello Does anyone have the recovery steps to revive a HP ScanJet 7000 after that his score has been removed? I had a tech select this option so that troubleshooting and now it has no real operating system to boot into other than the shell of the oper

  • Vista OS, COSTS were necessary, but never had Vista OS DVD

    I've been everywhere in the microsoft site and do not see where I can get the Vista Home Premium OS reinstall on a replacement hard drive. I have the Vista Home Premium OS COA, but never received a multimedia version of the operating system. Where sh

  • Photosmart 6510e

    When I try to copy I get a sheet of only same lines black for the color, all the test pages come out ok and I've changed the ink cartridge. I also checked the connections and cleaned the print area.

  • CD opens with the different title and songs

    I ripped a commercial CD of songs to my PC.  I was editing some info on the CD and went to the Internet for CD cover which did not appear on the CD. Unfortunately, she finds a different CD with a similar name and I accidentally applied the change to

  • Referencing the navigationPane parent for push()

    Hello I have a NavigationPane with a QML external page as an attachedObject that I push on the screen after clicking on a button.  In the new page, I like to push an another QML external page (it's an attachedObject) on the navigationPane.  How can I