G3-605 & SLI?

Similar Questions

• Satallite X 200: Win 7 does not recognize cards SLI in Geforce Dual 8600MGT

  Hi all

  I have a Satallite X 200 part number: PSPBUA-00N007 it has dual Geforce 8600 M GT graphics cards.
  The laptop comes with Windows Vista (32 bit (I think).
  I recently formatted the hard drive and installed Win 7 x 64 bit.

  The problem I have is that Win 7 is not recognizing the two cards. In Device Manager, it lists only 1 card.
  I tried the latest Geforce of Nvidia drivers that support SLi... not good.

  I tried to install the graphics card Toshiba for 64 bit vista drivers... not good.
  _The pilots work, but recognizes only 1 map monkey. _

  I get no SLi option in the nvidia Control Panel.
  Everything leads me to believe that the cards are not recognized by the system as being a pair of SLi.

  I can't find the graphics drivers for win7 64 bit on Toshiba.

  Is there something that I am missing? Is there another driver I need to install?
  I even installed a Toshiba chipset driver pack for my computer Toshiba Web site.

  I am in a bind. Help, please! :)

  Post edited by: Pengas

  Hello

  As far as I know two different drivers for graphics cards have been published for the X 200 series.
  A pilot has been published only for the models with a single graphics chip and the other driver was released for X 200 series equipped with two GPUS (SLI)

  Thus, for example the v7.15.11.5664 of 64 bit Vista driver is released only for SLI models.

  Since there is no other driver Win 7 on Toshiba page, I think that the only possible solution is the use of the driver of nvidia page.
  http://www.nvidia.de/download/index.aspx?lang=en

  The laptop supports dual NVIDIA GeForce 8600 M GT graphics with NVIDIA SLI technology
  So try the nVidia Driver.
  GeForce-> GeForce 8 M series (laptops)-> GeForce 8600 M GT-> Win 7 64 bit

• Satellite X 200-NVIDIA GeForce 8700 M GT SLI 512 MB is defective

  I need help. My laptop died on me. Toshiba Statellite/Satego X 200 series

  When I try and start the Power lights the light hard drive lights up for a milli second and then gooes on DVD light is on but I can't open the DVD player, you don't hear fan works, it makes no difference if Itry and start it with battery or remove the battery and use the power cable the screen remains black. I tried a reboot (I took the battrie and pressed the start butten for 1 min) still nothing.

  I finally took a mock store think (reason why I am I pay?) it could be the graphics card (costs about 300.00 Euros) or motherboard or?
  NVIDIA GeForce 8700 M GT SLI 512 MB which is in a /satego x 200 at Satellite - it someone know where it is in the laptop?

  I can at
  It into the broad back or I have to disassemble the computer laptop everything.
  Thx for any help
  Geordie58

  Hello

  Yes, it could be a graphics card problem.
  In this case the whole motherboard must be replaced.
  And you are right; new motherboards are expensive laptop parts a new cost about 300Euros
  Until it tell s your personal decision, you may get a second hand Internet goo mobo

• Satellite x 200-21 x with the 8600gt sli - performance in Vista & Games

  Hello

  I'm new here.

  So, I installed all the drivers brand new on my Vista Ultimate, but I noticed a few problems.

  1. where can I find or install turbo 1 GB memory... I noticed that in the screen parameters are the values not displayed as they should be written on information cards and Toshiba;
  2. in the exercise and more games I notice slow, bad performance with SLI mode market, with MSI updates of Microsoft especially for sli and nvidia, as well as 2 times 8600 GT with SLI where is performance?

  I had downloaded all the drivers at Toshiba support page... and here are my results: in the image:
  Link: [http://www.moj-album.com/slika/289812/Rarvg0J6H37YPODv.jpg/#]

  I would be very happy to tell me how can I improve my performance so that the games in Sli mode will go to 1024 x 768 with medium/high details in games like (Call of Duty 4, NFS Prostreet)?

  TX;

  Can someone with a Satellite X 200 and SLI in Geforce 8600gt tell me how to improve performance on my laptop and if its normally with the sli mode, with only 256 MB ram, graphic card 1024Mo all together and dedicated 767 MB, as seen on the link to my graphic card screen;

  Because I think that the graphic representation must be better... and now I don't know what to do?

  On my Satellite X 200 - 21 X I run Vista ultimate, all the latest drivers from toshiba are supported, and I can't play games on the resolution of 1024 x 768 with medium details;
  In COD4 is my default definition 800 x 600 all the way...

  So what I expect help and answers.

• Qosmio X 300 - 11W - cards SLI in the future

  Hello

  I m thinking on this laptop. I want it in replacement of the office. It seems to be very very good, but I have a question.

  There are now 9800GTX - is one of you knows if would be available to buy another card SIMILARLY to make SLI?

  Also - the speed of the HARD drive. It does not say how fast is it. 5400 or 7200.
  Is there anyone who has experiences with this laptop or you know some websites that says something more about it.

  Thank you

  Hello

  The X 300 series is new to the market, so I didn t find many sources that provide details on this laptop, but I found some details. Thanks to google and the user manual Toshiba site (you can find it on European support of Toshiba tribute) ;)

  > Also - the speed of the HARD drive. It doesn't say how fast it is. 5400 or 7200.
  There are 2 HARD drive installed and the two seem to work with 5400 RPM

  I didn t find all the details about the SLI option and the possibility to upgrade the laptop with the second GPU chip but I doubt that this will be possible.

• Power on the Satellite X 205 SLI 1 problem

  I have a 3 month old Satellite X 205 SLI 1.

  If I connect the power supply after that I turned on the pc it will not load. It is said: "power plugged in, not charging."
  If I start up the pc and the battery is not completely charged with power plugged it charge the battery to 100% and then start to use the battery until it goes down to 0%. I turn the computer work to restart the load.

  Does anyone have a solution to my problem or do I have to send repair?

  To be honest, this is a really strange behavior. Solution for this? Sorry but what you try to do? You can do nothing. I recommend you contact the service. The guarantee is valid and possible repair will be free.

• Satellite X 200 SLI falls down when the HDMI cable is connected

  Hello world

  I'm very sad about this. You just bought a new brand Toshiba x 200 SLI and I get a crash (blue screen on Vista) when I plug the HDMI on my Philips Full HD TV.

  I did not almost any update, but still, this shouldn't happen on arrival!
  Clues?

  Many thanks for any help on this!

  Hmmm this error is known to me, but unfortunately it is not easy to tell what's exactly wrong or what causes this problem.

  Sometimes this BSOD could be linked to the issue of driver/software, but the last time I received this message on my 5 year old laptop and finally I discovered that one of my modules of memory was defective!

  However, this laptop was equipped with two GPU chips then perhaps there could be something wrong who knows?  :|

  But it s very strange that in this case using the HDMI port to my knowledge only this satellite X 200 series are supported by a standard HDMI V1.2 (up to 1080i).
  Did you use the right cable?

  As you can see an investigation is necessary to locate the cause of the error.

  If there is something wrong with the hardware I would recommend contacting the ASP in your country in order to clarify this strange issue.

  Good luck

• Satellite X 200: Where to find the driver for nVidia 8600 M GT SLI

  Anyone know where I can find a driver for nVidia 8600M GT SLI graphics card?

  I tried to install the latest driver from nvidia (175.16), but my computer toshiba laptop does not accept this driver.

  I bought this laptop in order to more graphic with my autocad work and I can not yet use the shadows in my drawings...

  My old laptop with a simpel graphics card could this do without any problem.

  Any help is welcome

  THX

  Hello

  PSPB9Es Satellite X 200 series was equipped with the same graphic card than the PSPBXE Satego X 200
  Therefore, you can also check and install the graphics drivers from the PSPBXE Satego X 200 series too.

  Good bye

• Satellite x 200 SLi: I lost sound after Vista SP1 installation

  Hello
  I have a Toshiba Satellite x 200 SLi

  After I installed the SP1 of Vista, I just lost sound and even update the audio drivers... I still have several problems such as: sometimes the sound stops, errors, try to display movies... etc...

  Vista tells me that I have Norman for update my drivers but I already have the last avaiable driver on TOSHIBA page.

  Anyone with the same problem?
  No idea how to solve this problem?

  Thank you

  The problem is that Microsoft's Vista SP1 makes trouble. The problem is that not all drivers are compatible and fully supported by SP1.

  I think you have a Realtek audio chip. Perhaps have you check the site Web of Realtek s the latest HD audio driver

  If this doesn't help, then you will have to wait until the new update is available (or you will remove him SP1)

• Satellite X 205-Sli3 - display driver would not correctly work with SLI

  I bought a computer to portable Satellite X 205 - Sli3 in the United States less than five months ago and I had a lot of problems with it lately.

  It happens quite often that the computer crashes without apparent reason, for example when I use Skype, Windows Media Player, or DVD player. Moreover, as quite often happens out of nowhere, I get a blue screen error and the computer shuts down. When this happens, Windows asks me to reboot if I want to search an online solution, and he tells me that there is a problem with my NVidia display driver. I tried to reinstall the most recent available on the Toshiba site display driver (which is since last September, however and therefore not very up-to-date), but problems continue to persist.

  Because of the driver problem, I am also unable to use the NVidia SLI technology, because whenever I have try to activate, I get either a blue screen error or computer hangs momentarily followed by the message: "display driver stopped responding and has recovered. Display driver nvlddmkm stopped responding and has successfully recovered. » ??

  Finally, I can't put my computer into sleep or Hibernate. My guess is that it is also linked to the question of pilot.

  Help from anyone in this matter would be greatly appreciated.

  Best regards

  Martin

  Hi mate,

  sounds like a hardware issue. It would be wise to send the machine to the nearest service partner in your country because you won´t be able to fix it yourself.
  I guess it has something to do with the VGA card, or among the memory modules would not work as they should.

  I can give you a link to find the nearest service partner in your country and them just contact them to explain your problem:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871

  Welcome them

• Using Windows 7 64 bit with SLI Grafik on a Satego X 200-21 L

  Hallo
  HY all

  My Windows Vista 32 bit is corrupted, if I want to install Windows7 64-bit now.
  Can I do this? How can I get the functional SLI then? Is this possible? What is the way that I can install a driver and which driver? I the last time trieb 64 Windows Vista there is a message that I can't install a new driver without a driver toshiba.

  I hope someone give me some ideas.

  Can I then use more than 3 GB of memory on the X 200?

  Thank you very much

  Gruss
  Winger

  Hello Winger

  I checked the Toshiba download page, and unfortunately your laptop model is not supported for Windows 7 64-bit. I can see only Vista 64 bit is supported.

  So I really don t know what to say. What you can try is to install Win7 tips designed for another portable model supported for Win7 64 bit but identical or similar composantsmateriels.

  If you decide to use Vista 64-bit and you need help, we know.

• SLI Satego X 200 and XP driver?

  Hello

  It's me again.

  I have a question open with my Forceware driver (167,58).

  After installation, ot driver Device Manager showed an unknown device called "3d-video-controller.

  I thought that this could be the second video card (GF 8600 M GT). So I installed the driver for the specific device.

  It ended in an accident (blackscreen). After the reboot, the controller is now shown under videocontroller (where it belongs to) but is always marked with an exclamation point, which means that this driver is not or not properly installed.

  Question (s):
  -I have found no suspicion in www.laptopvideo2go.com this topic. Do I need a special Forceware driver supports two video cards (or SLI)?
  n ' is not able to support two video IC cards. SLI XP?
  -can I just ignore it (check the graphic performance will be one of my next tasks... If it keeps raining ;-))

  Concerning
  Kroever

  Hello

  Don t use 3rd third drivers!

  The X 200 use the same GPU as Satego P200 PSPBEE card

  There is a XP driver you could use!

• Photocopier Toshiba TF 605 prints very faintly

  Hello!

  My Toshiba TF 605 laser fax / laser printer / copier prints very faintly. New toner is used and the mirrors are cleaned. What can he still lie with?

  In addition, I find the operating instructions which were not handed over to me, unfortunately, with.

  Y does it have to use a possibility the printer on Linux or Windows after 98? Is there a universal driver?

  SRY, bad English. The translation was done through abacho.de

  Hope someone can help me

  greetinx
  Kiefer

  Hello Kiefer

  To be honest I don't think that someone here can help you with your photocopier, because we are here on the computer forum where people discuss books and different options.
  If you do not receive an answer here I recommend you to contact your local dealer.

  They should be able to help and send you to the right place where you can get complete support for your Copier.

• Satellite X 200-unexpected shut downs as soon as I use the SLI

  I've always bought Toshiba as well for me and the company,
  I bought a Satellite X 200 and as soon as I use the SLi makes the unexpected closure of the bottom computer...

  And the most important thing is that I paid a lot of money for it.
  My old laptop performance :(
  Feels like products are sometimes not tested until they sell.

  Anyone over with the same point of view on the Satellite X 200?

  My friend has a X 200 and has no problem with SLI.

  Have you tried other games? This game has maybe a compatibility issue with SLI.

  You use the graphics drivers supplied by Toshiba? If you use drivers from a non-Toshiba source, it can cause problems of this kind.

  Also update the BIOS and maybe try a new image (run recovery) if all else fails.

  If it fails on a new image, then a video card may be defective.

• After you enable SLI on the Satellite x 200 mode the screen goes black

  Hi all

  my name is Alessio and I encounter the following problem with my Satellite x 200-24e with Vista home 32-bit:

  Recently, I updated the operating system and yesterday I updated the VGA driver with the latest version available on the web site of Toshiba (display-20080904102618), everything worked fine but when I activated mode SLI the screen went black.

  I restarted the laptop and I tried to boot Vista on a regular basis, but I still got black screen.
  Then I started Vista in safe mode and reload the VGA drivers to set the SLI mode since the safe mode did not identify the model VGA.
  Can anyone help me solve this problem and get the SLI mode working again (I was able to set the SLI mode before update the VGA driver)?

  Thank you

  This wonderful s information.
  It of strange that the screen was dark after the SLI has been activated but it looks like it's working now.

  Thanks for your comments