G3 ProBook 440 i3: my hp probook g3 450 does not illuminate

Similar Questions

• HP Probook 4515 s does not illuminate

  HP Probook 4515 s will normally light after update BIOS to F20. Thing is when I press the power button / stop, cell phone started working, but screen remains blank. HDD led is orange and flashing continuously and CapsLock led flashes 5 times at the beginning which means general motherboard failure. But after some time (5 minutes 4 hours sometimes) it start starting BIOS then windows and continues to work normally all the time until what the computer is put to sleep or shut down. This will never happen before the update to F20 and problem is that now it can not be downgraded by using standard methods. Does anyone know of any possible way to return the BIOS F10, or another solution to the problem?

  Your drive "F" could have the folling cases: "."

  \Hewlett-Packard\BIOS

  \Hewlett-Packard\BIOSUpdate

  BIOS file has 3 files: current, new, previous

  sp55879 will be extracted in C:\swupdate\sp55879

  Copy 68GPI. F:\Hewlett-Packard\BIOS\New TRAY

  Copy 68GPI. GIS at F:\Hewlett-Packard\BIOS\New.  It should be located in F:\BIOS\Previous.

  Copy HpBiosUpdate.efi to F:\Hewlett-Packard\BiosUpdate

  I copied all the files from C:\SWSetup\sp59994\BiosUpdate

  Do not overwrite the log file.

  F.20 should be close to 20/12/2011

  The dates of these files will tell you what version.

  Restart the computer & it should start the update procedure.

  If successful, the new folder is empty, The Current folder & previous record are the same, except previous is now tiny.

• HP Probook 4520 s does not connect to Bose Soundlink Wireless (W7 64-bit)

  Hello

  I tried to connect my laptop (HP 4520 s) to my Bose Sound Link. I did the following

  -Makes sure that my OS (Windows 7 64-bit) is up-to-date

  -Looking for the latest drivers for BT. After searching through forums ages Broadcom player on their website seemed to be the best bet, but would not install on my laptop

  The speaker works like a gem on my my Samsung Galaxy S3 by BT, but just will not connect to my laptop. It is detected as a preipheral device, but does not have drivers.

  Can someone tell me please for the right drivers? I would really really appreciate it.

  Thank you

  Uday

  Hi Uday,

  Try this driver.  Please let me know if this helps solve your problem.

  Also for the next issues, your ProBook is a business model.  Your questions for this laptop would better answer on the HP Enterprise Business Community Forum

  Good luck!

• ProBook 4530 s: probook 4530 s does not turn on

  HIE

  I have a 4530 probook s and now its refuses to turn on after I had closed the lid to take care of something.

  Every time I try to turn it on the screen does not display anything, but the light that indicates that the laptop

  recharges will be continually turning white and orange. When I opened the rear just take a look, I

  seen as a very thin soft wire pointing to the top of the fan. Please help me if you have information on how to solve this problem

  because I was doing my research I wanted next week Monday.

  Concerning

  Wonderful collyns

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend you Contact HP support by phone to get help to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• HP probook 4530 s does not turn on

  Hello

  My probook parents has had a good run, and recently I added 8 GB of ram and a 250 GB SDS because they were coplaining about it being slow.

  I turned it on this evening and the screen went funny and scrambled, then frozen. I restarted in safe mode, and it froze again.

  I then restarted again and but this time the laptop does not start, the button flashes then dies.

  I unplugged my ac, took out the battery, based on the power button for 2 minutes and replugged the AC, but it did not work.

  Can you help me please?

  Thank you very much

  Hello @aw249 ,

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• ProBook 4710 s does not turn on (power light flashes)

  Hi all

  I was wondering if anyone knows why my ProBook s 4710 lights.  The vehicle currently has a flashing light on the power button.  It flashes every second.  Even when I took the battery, it still continues to blink!  Any help would be appreciated.  Thank you!

  remove the battery, other devices and the AC adapter... Press and hold the power button for 20 seconds... Plug the power adapter only and turn on the laptop...

• HP Probook 4535 s does not start bluetooth 43 error code

  I recently bought a HP probook 4535 s with Bluetooh installed. Now, he has stopped working and just upward with message-Windows stopped this work error 43.

  Hello

  You can try the following steps and check if it helps:

  Method 1:

  Try to run the corner hardware store and check the issue.

  Convenience hardware store

  For more information, see the article:

  Code 43: Windows has stopped this device because it has reported problems

  Method 2:

  You can check out the link to HP support and try to install the latest version of the Bluetooth drivers:

  Software and drivers HP download

  For more information, see the articles:

  Updated a hardware driver that is not working properly

  Update drivers: recommended links

• HP ProBook s 4540 - does not wake from sleep mode

  I tried a bit of everything that I could find on the Internet or what I know. Reduces the problem to the switchable graphics. Seams like WIndows cannot successfully choose what gpu. When I try to reactivate the screen is empty if the hdd led flashes and when the keys on the keyboard I can hear windows sounds. I have the latest drivers from Intel and AMD. All the updates of windows, all the drivers and software on the site need driver of HP. Double checked for the correct version, 64 bit etc etc. I tried to turn off windows hibernation, I tried to do hard reset, I tried almost all the power management, associate of hp of power, switchable graphics options including bios (I can only enable or disable graphic switchale) (for some reason I can't choose a fixed GPU?) I also checked for updates via the HP SUPPORT assistant. I tried save mode. I went through all the options of windows, I think. Tried the plans of different powers, ati catalyst (worst piece of sowtware never) options, etc. Nothing seams to work. I would appreciate any help from HP.

  I not unhooked old drivers with CCC (Control Panel-> Add) or remove programs-> AMD Catalyst Install Manager-> full delete after installation;

  My computer - right click - Properties-System - Device Manager - graphics card

  Amd Mobility Radeon HD 7500/7600 Series (Microsoft Corporation - WDDM 1.2) + yellow exclamation point

  Right click - Update driver and select new driver in the folder of the driver Amd (AMD C :-> AMD_Catalyst_13.6_Mobility_Beta-> packages-> drivers-> screen-> W86A_INF)...

  CCC not installed but it works great [cinebench 32fps] and solved problem of mode of sleeping

  If you are installing error cinebench or aida64-online

  (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx64\vcredist_x64

  (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx86\vcredist_x86

  If windows experince index error "windows media encoding/decoding performance.

  (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder64

  (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder

• ProBook 4720 s does not detect the SD card inserted

  I get no response when a SD card snaps, but 8 GB Transcend card is recognized very well of my little netbook from Toshiba.

  This is the first time I tried a card in this HP, although I got it a few months. Running Win 7 Pro 32-bit.  BIOS HP 68AZZ worm F.0F 18/02/2011.

  Well, I contacted HP support and got a helpful response within a day. Siva gave me urls for two drivers that I apparently needed (not very new drivers and I don't know why they were not there in this new machine, but any way..) and they installed, unlike the one I found just for me and giving a message "forbidden". However, once installed, both raised the box "this program cannot be installed correctly" (that I've seen before and never known what to do about it except devoted to work and hope for the best).

  With the drivers installed, the system * fact * detect the SD card so that it has shown in Device Manager and gave sound signals when it has been installed and removed. But he does not have assigned a drive letter and did not show in Windows Explorer, while it was still incommunicado or to serve as a ReadyBoost file storage.

  Thinking that it seemed that HP problems were over and it is now a Windows problem, I spent a few hours to make the seemingly useless things in Windows, all having to do with recovery of AutoRun, which is not.

  Now the SHIFT key while inserting the SD card could start AutoRun. Also, I gave the command 'net start shellhwdetection' and told me that the service was already running. And AutoFix.exe from Microsoft verified that the shell hardware detection service was on and the autostart value. But to step next, as the wizard repair didn't see that other readers, not the SD card, so I couldn't specify only * that * drive AutoPlay wasn't working on, and which ends the program.

  Support software MS said that if ReadyBoost enabled and there (and it was) and still does not work there because some services he needed had been extinguished. So I Dove to the various lists and tried to turn on anything that seemed relevant and which has not already lit.  Nothing seemed to still accept my changes. Very frustrating. But then I went back to where I had left access control panel in Explorer, and I saw that the SD card has sometime been recognized and awarded drive E. Shazam!

  Therefore, all followed the script and I could bring up the window of the tab (in the properties of the drive E) option for ReadyBoost and say, go ahead. He did, and it seems to work very well. It closes fast when I close the lid, with several major programs running, as well as 4 windows in FF with about 12-24 tablets of each, and it took only 60 seconds to wake up this morning.

  So the problem is solved with something good help at HP, but not gracefully or usefully for others, I'm afraid, because I can't say yet exactly what I did.

• ProBook 4730 s does not post or swap HDD

  Hi my HARD drive failed and I swapped the drive HARD ok, however, the recovery discs provide do not work the drive do not work with the reporting system? (HP supplied), does not see the drive in the BIOS, but the diagnostic tools are reporting ok? Help, please... Thank you

  Hello wayoutwestnz,

  Welcome to the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Thank you and have a great day!

  Mario

• My touchpad for HP Probook 4525 s does not work and I am locked, I don't even have a password!

  I'm not really sure what's going on.  During the implementation of windows, there is a picture of this mouse pad with a slash through it, which appears low, then disappears.  I am unable to move my pointer at all.  I didn't add or remove anything.  I know enough to get me into trouble, so maby someone can help me out there.  Also when I view Windows, it tells me that I am locked out and I don't even have a password.

  Plug a standard USB mouse. It's as simple as that...

• New ProBook G1 450. WiFi won't turn. No such driver on the HP driver support page.

  In short:

  the Wifi on my new ProBook does not illuminate. Device Manager indicates that the device driver for the Wifi does not load and may be missing or damaged. It is said that the wireless device is an Intel Dual Band Wireless-AC3160 with Bluetooth handset device. HP driver support page is not a driver for this wireless device.

  Data sheet:
  ProBook G1 450
  Windows 7 Professional 64 bit
  Wireless: Intel Dual Band Wireless AC3160 with device combined Bluetooth

  In more detail:

  This is a new ProBook G1 450, which I'm still doing basic settings I've not yet added my programs. I'll put up the pre-installed operating system preinstalled with HP programs.

  There the code connects to the internet via an ethernet cable and I downloaded several Win 7 HP updates in this way. But it does not connect via a wireless network. It does not recognize that there is Wifi signals in the area. My old Thinkpad and my tablet to recognize a number of strong Wifs in the region and easily connect to the one that I am authorized to use. The ProBook said that there is not a wireless in the region.

  The ProBook WiFi is apparently disabled. The wireless light is turned on (white) and when I click on the appropriate icon, there's a message saying that Bluetooth is activated, but the Wifi is turned off.  Light is supposed to turn on if Wifi or Bluetooth, or both are enabled, it is not a malfunction if it lights up when turned on the only. But I have not yet tried Bluetooth.

  Many other ProBook G1 450 apparently have a Ralink wireless device or other devices. Not mine. Apparently my ProBook has an Intel Dual Bank Wireless-AC3160 with Bluetooth handset device. That's what told Device Manager. And this device can be great or maybe even a nice improvement. However, unfortunately, the Device Manager also said "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). »

    The page of HP support for downloads of driver for my ProBook has no driver for such a device with wireless Intel.

  I did not try the wireless until you install many updates to Win and HP. As I noticed the problem of wifi, I found that it not install HP update: it was for 5 Hotkey support. Since then, I amhaving a little trouble with some other updates. I mention this in case it is interesting, but I can't see any link between these updates and Wifi.

  Help!

  It is resolved.

  It was a driver problem. I had looked for the driver on the page of intel as well as the disk HP support page and it has not been found. But I looked back to the page of the Intel wireless driver and judge. The tricky part is that the pilot is not directly under Intel Dual Band Wireless-AC 3160: no driver is listed directly for her. But intel brings together a large number of drivers wifi under the Intel PROSet/Wireless software. If you use the Intel Driver Update Utility 2.0. It updates the PROSET/Wireless software, and then this software installs the updated wireless driver.

  My ProBook came with the Intel PROSet/Wireless software, but it is version 16.x.x.x. update the Intel page, is now 17.1.0.19.   He has in turn updated Daul Band Wireless - AC 130.  And now the s easily connects to Wifi.

• HP probook 450 g2: hp simplepass does not

  I bought a brand new hp probook 450 g2 pc laptop last week.and than th pass simple version 6 nuts also, I installed his does not not the sensor I does not please hep to solve this problem

  @darshmorgan

  darshmorgan wrote:
  

  so why insert it a finger print sensor to these business notebooks.is there any option to enable that works because this note book only for personal use

  In response to your questions:

  • Laptops of professional quality are equipped with sensors of finger prints for the same reason that consumers rank models offer the feature - biometrics are a method very popular to connect to your computer without having to type a password.

  SimplePass software runs on quality consumer laptops.

  • Security of client software runs on the professional quality laptops.

  Both programs offer some of the same functions.

  

  Options

  Install and run the Client Security

  OR

  If you run Windows 10

  and

  If you only want / need to connect to the computer with your fingerprint

  then

  You can set a PIN code and then activate the fingerprint reader to log that ships with the operating system Windows 10

  Start / Windows key > settings > accounts > Sign-In Options > PIN

  Help:

  Add or remove fingerprints - 10 Windows logon

  OR

  If you do not want to install / use the Client Security software on your computer

  and

  you do not want to be able to connect to (most) sites without having to type a password,

  then

  You can buy a password management program

  If you want, you can combine security software and password into a single service manager.

  Example: Avast Prime Minister

  DISCLAIMER: I do not work for Avast nor do I have any personal affiliation or business with the company - I have used their products.

  

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• HP probook 430 g3: keys Fn + brightness does not

  My probook cannot control the brightness by fn + shortcut. I tried to update the driver and reinstall the driver but it still does not. Any recommendations? Thanks in advance.

  Thanks for the reply. I just installed the driver "HP Hotkey support (American International)", then it is working.

• ProBook G3 450: ProBook 450 G3 Ubuntu sound

  Hello world!

  I bought a HP ProBook G3 450 and installed Ubuntu 15.10 on it. And there is no sound at all. I tried to google, the decigion, but failed.

  Please help me with my problem.

  Hello!

  I just got my 450 G3 his askubuntu in collaboration with this response:

  http://AskUbuntu.com/questions/700167/no-sound-on-Ubuntu-15-10

  I'll also copy the instructions in case where HP removes the link:

  I found the solution (!), create a new file /etc/modprobe.d/intel.conf

  Add the following options:

  options snd-hda-intel single_cmd = 1
  
  options snd-hda-intel probe_mask = 1

  reset...

  * NOTE: I'll make sure, if you have any data there, you save it, just in case (I came across no problem, however).  I'm Linux system admin and I always make sure you that I have a recent backup of any system I make changes to the system, just to be sure.