G4-11125dx: USB Driver issues HP Pavilion g4-1125dx Notebook PC model #: LW342UA
Hello. I have a:
HP Pavilion g4-1125dx Notebook PC
Model #: LW342UA
When it has been upgraded to windows 10 I lost all USB functionality. The Device Manager uses a driver, but it does not work properly. "Standard Enhanced PCI to USB Host Controller" and "Standard OpenHCD USB Host Controller" have the yellow exclaimation points with the USB symbol next to them. Under properties, it reads:
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
{Unable to load device driver}
HS device driver could not be loaded.
Error status is 0 x %x
When I try to roll back the driver nothing is available. When I try to update, it says I already have the best driver. I tried the windows update and Easy Driver software but no luck there.
I confirmed that I do infact has power to make ports (USB fan :/) so I don't think that it is a hardware problem, especially since it worked before upgrade.)
I know that its a laptop older, but I upgraded the CPU to a quad core Phenom II N970 and this 'thing' is running if good, I do not give up on it. Ethernet and wireless are working properly and there is no other troubled hardware issue.
Thanks in advance,
Cory
I tried to go back to windows 7, but I've been spending the period from 30. The laptop is not the recovery disks, or a partition to do. For the heck of it I advanced and reinstalled windows 10. Now the USB ports work correctly so I guess it was something that happened during the initial upgrade? Anyway thanks for your help!
Tags: Notebooks
Similar Questions
-
want bluetooth Driver for HP Pavilion n011tu 15 Notebook PC
Hello
want bluetooth Driver for HP Pavilion n011tu 15 Notebook PC
See if it works.
If not, unfortunately, I won't be able to help you further on this issue.
-
Pavilion 15ab032tx: USB driver for HP pavilion 15ab032tx
Hello... I recently installed Windows7 in dual boot with pre-installed Windows 8.1. But Windows7 doesn't read my usb devices (thumb drives, phones etc.). I am looking for a suitable place download the complete driver sets for each thing, but unable to find... the product support page only shows drivers for Windows 8 and more (also no USB driver). Help, please. I have only Intel USB 3.0 eXtensible host as driver usb controller
Hello:
Download, unzip and run the file setup.exe from the link below...
-
problem of USB driver for HP pavilion 15 computer laptop n028se
Hello, I have installed windows 7 64bet and installed all the drivers and windows update, but the usb port driver is not installed and windows cannot find the driver... Please any help?
Hello:
You need the usb driver 3...
-
Hi all!
I intend to add an SSD for my HP Pavilion p263nl-15 Notebook PC. I found some sites that I can remove the optical drive and put a second drive using a caddy adapter in the optical drive Bay. I found that some people on the forum did it successfully, but nothing on my PC model. I want to know if he could work with my product.
In other words, there is my plan:
1 remove the real disk HDD hard bay and replace it with the new SSD.
2. remove the optical drive and replace it with the adapter caddy containing my old HDD.
3. do a clean install of Windows 10 on the SSD using a USB key recovery made with my real Windows 10 system (which has been updated from Windows 8.1 July 2016).
I already have a 120 GB OCZ SSD (OCZ Vertex 3).
I have a few questions before buying the adapter:
1 - the two drives (my old HDD and the new SSD) are recognized by the motherboard / BIOS and the operating system (Windows, 10)? Is there a limit to a unique HARD/SSD disk drive on the computer?
2 should. What size the card be? I found offers for 9.5 mm and 12.7 mm that are supposed to be suitable for HP Pavilion in general
3 - these parts work together and with my computer (size, compatibility)? You can expect any problems with this upgrade?
4 - clean install Windows 10 quote, because I intend to install it on a different drive than the one I used to create the key USB recovery flash? I have never done a clean install of Windows before.
Thanks in advance for your answers.
Alessandro
p.s. in this section of the forum (where I took most of the post), the solution worked almost perfectly, but it's a different product of the Pavilion 15 ^^
Hello
1. Yes,
2. your machines use 9.5 mm SATA Tray,
3 problem? I can't answer this question because who knows nothing until the track.
4. I don't know how you create USB recovery but a good new installation should work.
Kind regards.
-
Satellite A60 USB Driver issue - 28 error code
I have a laptop satellite A60. I had a crash of the system due to problems of graphics card and had to reinstall windows xp pro etc...
Now, I unplugged my USB2.0 hub to go sit somewhere else in the House. The day after that when I plugged in the rear hub, it gave an error code 28, saying that the software required to install the device is not found... And the hub does not work. Now, it's the same story with my sm-buscontroller...
The hub has its own power suplly and I am running Windows XP Pro with SP2.
Hello
Code 28 means that no drivers are installed and you need to install the correct drivers.
Please choose the device (USB hub) and reinstall the driver of this source C:\windows\system32 -
Hello!
I intend to add an SSD in my two years 15-e073ca HP Pavilion Notebook PC. I found some sites that I can remove the optical drive and put a second drive using a caddy adapter in the optical drive Bay. I found that some people on the forum did it successfully, but nothing on my PC model. I want to know if he could work with my product.
In other words, there is my plan:
1 remove the real disk HDD hard bay and replace it with the new SSD.
2. remove the optical drive and replace it with the adapter caddy containing my old HDD.
3. do a clean install of Windows 10 on the SSD, using a recovery USB stick made with my system Windows 10 real (which has been updated from Windows 8.1).
I plan to purchase the following parts:
1 - a HDD / SSD cart adapter for HP Pavilion 15 (model OBHD9-SATA-SATA-BU9), of NewmodeUS (http://www.newmodeus.com/shop/index.php?main_page=product_info&cPath=2_5&products_id=583)
2 - a SSD 128 GB (article SDSSDHP - 128G), SanDisk (http://www.sandisk.com/products/ssd/sata/ultra-plus/?capacity=128gb)
I have a few questions before I buy parts:
1 - the two drives (my old HDD and the new SSD) are recognized by the motherboard / BIOS and the operating system (Windows, 10)? Is there a limit to a unique HARD/SSD disk drive on the computer?
2 - the height of the SSD is 7mm, and it seems that my old HDD is 9.5 mm in height (model WDC WD10JPVT-60A1YT0). It would cause no problem (I need to add spacers)?
3 - these parts work together and with my computer (size, compatibility)? You can expect any problems with this upgrade?
4 - clean install Windows 10 quote, because I intend to install it on a different drive than the one I used to create the key USB recovery flash? I have never done a clean install of Windows before.
Thanks in advance for your answers.
Haghe
Your plan is perfect. The SSD to will of 7 mm that always come back fine it just will be lower in the caddy. The holes and SATA connections are in the same place as a hard drive of 9.5 mm. You can use a spacer (many SSD include one in the box) but not really necessary.
Installing SSD for Windows 10 the way you expect is not really "own", that he will again introduce files and programs, in my opinion and certainly drivers. Whatever it is, it works perfectly and activates the old installation has been enabled.
The hard disk in the optical adapter will not be bootable and will transfer the data a bit slower than a drive in the main compartment, but will still be usable for most cases. If you need fast input/output like Photoshop or video editing move the job file to the first SSD. Alternatively, you may wish to consider documents and photos and other migration on the HARD drive to keep the 128 GB SSD to fill. You can right-click on these files and select 'place' and move them. After the back if you need some help with that.
Enjoy.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
HP Pavilion g6 - 2229ee Notebook: driver Bluetooth HP Pavilion g6 - 2229ee Notebook PC
Hey...
could you help me please to solve problem bluetooth laptop HP Pavilion g6-2229ee... n with Win 8.1 (32 bit)
I tried a lot of packages such as (sp58944) identified bluetooth, but it did not work.
Thank you
It is a totally different bluetooth driver designed for the model of wireless card that your laptop is.
You install the bluetooth driver model corresponding to the model of wireless card that your laptop is.
Bluetooth and wireless radios are on the same circuit.
-
Please send driver WIFI for pavilion dv6-6160se notebook PC
Mr President, my pavilion dv6-6160se PC laptop WiFi is not recognized, send the driver file to {deleted personal information}
Ive win7 64-bit, processor i5
Hello:
This should be the driver you need:
If the map has integrated Bluetooth, you also need this one:
Paul
-
Hello all, I need help please the audio driver no sound, video and Game Device Manager, just updated the windows but no change, please help, thanks
Gentian01, welcome to the forum.
When a help request, you must always include the make and model (e.g., p6-xxxx) of the computer or the monitor. This information is necessary for us to review the specifications for them.
Before you answer, I suggest running Windows Update to see if that solves your problem. Otherwise, you should go to control panel / sound and check the settings to make sure that they are correct.
-
Help me I want Graphics Driver for HP Pavilion n013se-15 Notebook PC
Help me please
Hello:
Please follow steps 1 through 4 to get the graphics to work on W7 32 bit for your model:
1 install the Intel chipset driver and restart.
2. install the Intel graphics driver and restart.
3. download and install MS .NET Framework 4.0.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=17851
4. download and install the latest amd catalyst driver beta.
http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx
-
Beats audio driver for HP Pavilion p001tx 15 Notebook PC
My window will crash.
After the restart, there was no driver audio beats.
where can I get it?
Hello
Download and reinstall the audio driver at the following link.
http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66107.exe
When the installation is complete, restart the laptop.
Kind regards
DP - K
-
HP Support Assistant said I'm new updated including the BIOS, but updates blocked at the final stage, also happens to cyberlink photodirector, what to do? PS: anyone can give me the sp76846.exe so I can update manually?
Nope. I opened it myself in the temp folder after the closing of the Task Manager.
-
Pavilion 17-g015dx: USB driver
Need help to find a usb driver for a Pavilion 17-g015dx with windows 7 professional 64-bit os. No usb port works now after installing windows 7 replacement of windows 8.
Hello:
This driver should work...
http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_148026_1
-
Pavilion 500-090 USB driver works only with windows 7
Hi, I lowered my pavilion 500-090 of Windows 8 for Windows 7 and impossible to find a suitable driver for the USB controller. Does anyone know which driver will work?
Hello:
Here is the link for the usb driver you need and you can use all other drivers of the model above for your motherboard as well.
DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK
Maybe you are looking for
-
T530 fingerprint - Win7 Pro Reader - does not work out of the hibernation
Out of the hibernation of the fingerprint reader does not recognise my fingerprint at the level of the BIOS to unlock the system password and hard drive or at the level of Windows to connect on my Win 7 Pro account. Works very well on a cold start or
-
How waveform downsize the data before it is drawn
Hello I am interested how does waveform downsize the entered data is plotted and what algorithm is used for this purpose? My goal is to draw 30 parcels that have 1 M samples each and I want to downsample them before tracing on a chart. I tried severa
-
I have problems with xp and that you want to run sfc, but I only sp2 disk so computer keeps asking for me to insert the disc of sp3. So I want to uninstall sp3, doing a sfc then reinstall sp3. Something happened to the installation files for trying w
-
Is it possible for me to load my copy of windows vista on a second computer?
I had a computer I bought Windows Vista to computers and installed. A few months later, the computer crashed (I think that the power supply has failed and chips to the motherboard somehow, don't know what happened). I'm pretty sure that the hard driv
-
ACS software for the Windows Server license
Hello everyone, I had a question about this software ACS, the ACS license expires? Or I can use it indefinitely? Kind regards.