G42 - 490 YOU: what changes can I see or wait until after the upgrade of RAM?
Hello
My PC model # is G42-490TU, processor - Intel Core (TM) i3 CPU M370,
RAM: 6.00 GB (2.93 usable), System Type: 32-bit operating system.
I've recently upgraded RAM 2.00 GB to 6,00 GB with 2.93 GB usable, that's what it shows.
I want to know if this 2.93 GB of 6,00 GB usable the correct value of the memory that is made available?
Also, I want to know what changes can I see or wait after upgrading the RAM from 2.00 to 6.00 GB where 2.93 GB is usable? How does this improve the effectiveness of my PC? Is there something that needs to be done on my own apart from adding the RAM to increase performance and the maintenance of my PC?
Thank you best regards &,.
Isha
The problem is the operating system of your laptop is 32-bit.
A 32-bit operating system can use @ 3.25 GB installed memory.
Install additional 4 GB to a laptop that had 2 GB was a regrettable mistake.
As long as the 4 GB memory module you have is compatible, you'd better remove the 2 GB module and put the 4 GB module in its place.
You won't find a lot of improvement with the current configuration of a 2 GB module and a 4 GB module. With this memory configuration does not work in dual channel mode. You would be better with two modules of 4 GB, but this is only if you upgrade your operating system to a 64-bit version.
In fact, you would have improved if your OS is 64-bit. A 64-bit Windows operating system will recognize and use the installed memory.
If you really want to improve the performance of the laptop, you should consider upgrading to a SATA SSD 256 GB drive at least.
Tags: Notebooks
Similar Questions
-
Can not activate CS4 Web Premium after the upgrade Hard Drive Mac OS x 11.3
I can't access any program now CS4 after upgrade my hard drive to an SSD. I get a small dialog box saying "license for this product has stopped working. Error code 150:30"MacBook Pro, OS X 11.3 (el Capitan). The chat tech support person told me that CS4 is "not compatible" with El Capitan, but I've been using Cs4 for several months now with El Capitan, so it's not true.
In the past, when I've got a new Mac or upgraded the operating system, I had the opportunity in an Adobe dialog to enter my serial number in, but this is not the case now.
Nothing has changed since this morning except my newly upgraded hard drive. Except that this time I don't have a way to enter my serial number and reactivate.
Error 150:30 - error "Licensing has stopped working". Mac OS: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
-
I can't open my pdf even after the upgrade to the latest adobe reader (DC).
When I try to open a pdf file I have the "to display all of the content of this document, you will need a newer version of the pdf viewer...". "and even if I have the latest adobe reader is installed, I still can't open it.
Then either
- Use a browser that uses the Adobe Reader plugin
- configure your browser to use the Adobe Reader plugin
- Download the document to your local drive, then open it from there
-
I can't google in search engine after the upgrade to 9
I just upgraded to version 9, and now search engine (the one top-right) does not at all. I used to have google as default and the other engines available on the menu drop down. If I manage search engines, I am taken to the Add-ons page with nothing like that the choice of research, I used to have. Is this a bug or this feature is no longer available? If Firefox supports more this feature, how to return to an earlier version without losing Favorites, settings, etc.? Win xp SP3 on the desktop.
I tried to open firefox with a new profile, and there was no change. In desperation, I copied the profile to the desktop, completely uninstalled and reinstalled firefox folder. Copied old favorites and cookies to the profile folder, then restore bookmarks of these files. It seems to work so far, at least the search bar is back and work and bookmarks are intact. I guess it was a bad installation of the origin of the problem. I still need to get a few things that still works, but not more time for that now. It has been a project all day.
Thanks for the help. -
After the upgrade of the APEX 4.2.0.6, I don't see any change
Hello
I have a production APEX running version 3.1. I downloaded APEX 4.2.0.6 and installed. I didn't remove the previous APEX users because I fear that it would change anything prevents existing applications runs properly.
When I connect to APEX http://xxxxxxx:7780/pls/apex / ,, I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?
I can see there are users in the previous version. But I've not deleted the. What prevents the Apex 4.2 runnig?
SQL > SELECT username
2 FROM dba_users
3. WHERE (username AS USER OR name "FLOWS_ %" LIKE '% APEX_')
4 AND USERNAME NOT IN)
5. SELECT "FLOWS_FILES".
6 DOUBLE
7 UNION
8. SELECT 'APEX_PUBLIC_USER' FROM DUAL
9 UNION
10 SELECT SCHEMA s
11 FROM dba_registry
12 WHERE id_comp = 'APEX');
USERNAME
------------------------------
APEX_030200
I used this document to install APEX http://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#HTMIG839
Thank you for your help.
Christian
Hi Christian,
chipniz wrote:
Hello Kiran
I redid all installation steps and found that I now have this error:
Service temporarily unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server.
When are you facing this error?
- Access to the APEX Oracle Application Builder (http://someserver:7780/pls/apex)
- Accessing an application in Oracle APEX (directly through URL viz. http://someserver:7780 / pls/apex/f? p = 123:101)
What kind of error is it?
- HTTP error with an error like 404 code
- Error on Web server with detailed description of the error (if so, check the newspapers of OSH for more information)
What is the type of the OHS?
- Oracle Application Server 10g
- Oracle HTTP Server distributed with Oracle Database 11g
Finally it is part of your question:
When I connect to APEX http://xxxxxxx:7780/pls/apex / , I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?
What did you mean by that?
- You receive the login for the old version screen
- You receive a blank page
I would like to you check the following things:
- Check that the APEX_PUBLIC_USER account is unlocked. Please see section 3.5.5.2.1 on expiry of password in the Oracle 11 g database in https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJHJAG
- Check if you have copied the images properly after the upgrade. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJDGFJ
- Check that you have the correct configuration for images settings, the database connection string, user name and password database. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#CHDHCBGI
I hope this helps!
Kind regards
Kiran
-
I can't use creative cloud. After the program open, I see backbone of creative cloud and empty space without all the icons. I want to download photoshop as I pay by bank transfer for Adobe...
If you see a blank white screen, see this link. If you see something else, please let us know what you see.
Blank white screen. Sign in | Creative cloud Packer
-
Why can I see my other computers on the same LAN after typing netstat b in same cmd if I didn't make any connection? owner of 192.168.1.104:50768 result [svchost.exe] TCP - PC:5357 ESTABLISHED
Hello
Thanks for asking!
This is because the network discovery is turned on.
If you want, I suggest try tuning off the COAST of the discovery of the network and check if it helps.
Enable or disable network discovery
http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery
Reply back with the results. I'd be happy to help you further.
-
After the upgrade to the latest version 13.0.1
I can't open videos from youtube and other sites
I tried all the solutions, but none works
I would also consider the following. Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox 13 are probably caused by a recent update of Flash 11.3 and/or Real Player browser plugin to malfunction.
To resolve this problem, follow the steps in these articles in the Knowledge Base:
Flash Plugin - maintain and troubleshoot
Adobe Flash plugin has crashed - avoid that it happen
11.3 Flash does not load video in Firefox
We'll find other information on more technical issues under these links:
http://forums.Adobe.com/thread/1018071?TSTART=0
http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html
Please tell us if it helped!
-
I got the upgrade notification windows 10 and I booked it. Is to show that after July 29, it will download a 3 GB file and then it will move to windows 10.
I have two questions-
- Once upgrade of windows 7 windows 10, is it possible to get back to it in windows 7? I certainly do not want to reinstall windows 7 again. [after the upgrade to windows 10, both windows 7 & 10 windows will always be in my system?] ]
- I have two OS on my system - window 7 and ubuntu 14.04 [both are level of OS boot ] it will make my Ubuntu OS during the upgrade of windows 10.
Yes, you can restore it will affect the Ubuntu:
Can I uninstall Windows 10 if I do not like it or something is wrong?
Yes, you can see the following: how: go back to an earlier version of Windows from Windows 10
Please note:
Backing up your computer:
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1Also check:
How to back up and restore your files manually
How to: build 10 tips before installing the latest version of Windows 10
How to: 10 things to do if the Windows 10 install fails.
Once you have installed these important updates and followed the required steps, you should be ready to receive your free Windows 10 update this summer.
-
I can't uninstall anything. It is permanently blocked with the message "Please wait until that the current program is finished uninstalling or changing" appearing if I try to uninstall any program.
Hello
Try the methods provided below and check if the problem persists.
Method 1
Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
(a) click on Start Menu
(b) type msiexec /unreg , and then press ENTER.
(c) click on Start Menu
(d) type msiexec/regserver , and then press ENTER.
Method 2
If the previous step fails, check if it has all the facilities waiting on the computer using the registry.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
Empty registry key "InProgress".
Check the following registry key:HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress
Empty/rename "PendingFileRenameOperations" registry key
Check the following registry key:HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations
-
I want to know how to make my tabs save when I close Firefox. I did what was suggested in the FAQ section, but all my tabs disappear whenever I close Firefox, you use the command "exit", or the "X" button That was the reason I never updated to the new version previously, but hoped that the problem had been addressed and updated, now I'm stuck with having to reopen each tab whenever I open Firefox. Please tell me there is a way to fix this. And I'm not fluent technospeak, so I need simple and basic instructions. Thank you. Mark
Hello
By pressing Alt + T on the keyboard displays the Tools menu.
To see the full menu bar temporarily, press Alt or F10.
To make the permanently visible menu bar, right-click on the + after the last tab and enable (check) menu bar or press Alt + V > toolbars > menu bar................................................................................................................................
Useful links:
Beyond the tools > Options - about: config
Information page (Alt + T) tools > Page Info, right-click > view Page information
Files & Firefox profile folder
-
My iPad mini asks for a password after the upgrade to iOS 9.3, but no password was put on the device. What is the solution?
I guess it is asking you to CREATE an access code. You can disable it later.
-
Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please
When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.
These must be run as administrator. If you have only one user account, you are the administrator.
Run the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.
Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.
Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.
When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.
These must be run as administrator. If you have only one user account, you are the administrator.
Run the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.
Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.
Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
Can I turn off my PC during the upgrade to Windows 10?
Original title: Upgrading Wondows
Can I turn off my PC during the upgrade to Windows 10
Can I turn off my PC during the upgrade to Windows 10
Hello.
No.; You can't turn it off while improving to 10.
See you soon.
Maybe you are looking for
-
iPhone after iOS 9.3.5
Recently, I upgraded my iOS to 9.3.5. Now my iPhone 5 will hardly retain a charge for a day with little or no use. And it loses about 25% power during the night. Everyone knows about this problem? Thank you
-
I am running XP Pro.
-
my laptop keeps going mode hibernation for no reason
my laptop keeps going mode hibernation for no reason
-
HP Photosmart 2575 all-in-one will not recognize that the book is in the status bar
What can I do to fix this? When I try to print, I get an error message saying paper not in the status bar, but the paper tray.
-
Windows Family Safety API from c# 8?
Someone knows a good way to access the new Windows 8 parental from c#? Or any other programming language or scripting tool also? I want to write a small program that would connect to the Microsoft Family Safety website and check a number for a child