G50 - 80 - light and camera problem

Control of brightness on my laptop keys does not work and I am not able to switch on my camera. Please, help me in the present.

Thank you

Mod edit: System model added to the front of the subject line to improve visibility / clarity.

In response to customer relationships of G50-80 laptops running Windows 7 does not detect the webcam, a solution has been made available through a BIOS update.

You can find the TIP of Service here: https://support.lenovo.com/ca/en/documents/ht104202

Thank you

Tags: Lenovo Notebooks

Similar Questions

  • Windows 10 place 8 Pro (5830) Orientation, driver, Boot and camera problems

    I've had problems with camera for a while now. When I try to open the camera application, I get a message that the camera is not connected. I tried to solve this problem through different methods, none of which work, and all of a sudden, I start getting a problem of Orientation.

    A few days earlier, I tried to start, and the machine would only start in Portrait mode. Tilt, rotation, etc. would not alter orientation. I went into the settings and was able to make the meeting place in the landscape, and he should stay there until the next time I started. It always starts in a Portrait, a direction that I rarely use.

    I thought that my problem was perhaps a pilot and I checked the Device Manager. All seemed well. Then, I went to the Dell Support and ran the driver verifier. They told me that I needed to update the Chipset Intel Atom Z3000 Series driver, so I started the download. The download is finished and the machine began to install it. Almost immediately, I got the error that the "Installation failed." I tried again and again, failed.

    Then I looked in the Device Manager to see if I could find where this driver fits, thinking that I could remove the driver in the machine and it would be automatically installed. After carefully by the Device Manager, I found the driver.

    Either incidentally... at some point earlier today, I might not even the machine to start. It froze on the screen, you get before the login screen. About 15 restart attempts finally worked and the machine will start up again.

    I then tried to reset the Tablet and received an other error message that it could not be done.

    I'm in a world of pain, here. Any suggestions?

    OK, no responses, so here is my solution...

    I've broken down and decided to follow the hard way... to the format of the drive, then reinstall Windows 10 and all software. It's a great job. The first thing is to gather all the material needed to make this work.

    Necessary material:

    1. an adapter Dell to allow the power supply and USB connection full size at once. I have a Dell for $20.

    2. a USB Hub with a minimum of 4 entry slots.

    3. USB keyboard

    4. USB mouse

    5 USB Wireless Network adapt

    6 USB Windows 10 32-bit Installer

    7. a lot of Patience.

    Connect the USB Hub to the Dell adapter (1) and insert line electric adapter Dell, attach it to the tablet in the mini (or is this microphone?) USB port.

    Hold the switch and the Volume until you pass at the same time until the Tablet starts in the BIOS. Change the boot order using the Volume button upwards so that the tablet will boot from USB Windows 10 Setup and follow the instructions.

    Once win 10 installed, make sure that you have a wireless connection, and go to the Dell Support to download and install the Driver.Your Chipset coming 8 Pro should now allow touch screen and Orientation. Download and install no matter what other drivers you need and all your software. Set up and you're back in business.

    Wow, that took me 6 hours, but all works, now including my camera

  • My iPhone 5 c is not light after gel problems and it comes up with the apple logo, and it ends and still will not come on, so help please?

    So I just watched a video on YouTube so I wanted to play a game so I clicked on the home button and when I did he was frozen, so I've been around by pressing the power and the home button at the same time and I did that turns off the coast as if it was supposed to do I he turned back and came up with the Apple logo as usual then it just turned off and I do fear and all I keep getting is turn it on and it is still is not turn on and my phone has had these freezing problems before, but never like this

    If your iPhone, iPad or iPod touch does not respond or won't turn on - Apple Support

  • All of a sudden my monitor went black and came vertical back instead of horizonal. Driver problem?

    When installing a virus checker my mototor suddenly went black and came back with everything in a vertical rather than horizontal. My thought is that I

    now have a driver problem. What are the proposals?  Pete

    Hold down the Ctrl and Alt keys at the same time and use the arrows to rotate back.

  • Problem when I add any object and camera

    Hi all, thanks for helping me with this.


    Here is a link to a video I recorded showing my problem.

    77c8e8bd-51e4 - 42d 7 - 97 d 8 - b918f7d12f84.3gp - Google Drive

    After you run the 3D Tracker and the creation of any object and camera.  The angle of the camera moves as the original video moves as well.  I want the camera to stay still instead of tilt angle of the video.

    Thank you

    Aaron

    Your screenshot is Aussie bad quality that I can't really tell exactly what you're doing, but looks like you're not understanding what the tracker of the camera is, or how it works. First of all, the video layer must be 2D. You have changed the video layer 3D and it would never work. Tracker camera recreates a camera inside the AE that corresponds to circulation, the focal length and the position of the camera to film the scene. Camera Tracker provides a way for you to create a ground plan and original that align to a starting point in 3D space of AE so the global center of the model is aligned with a geometry in the plan. Camera Tracker of the AE does not match lens distortion, so if you keep track of the shooting was shot with a lens wide angle and there is a lot of distortion so you must remove this distortion before follow-up or the edges of your 3D objects will drift as the camera moves unless they are located in the center of the photo that is free from distortion.

    I don't know what you're trying to accomplish with your shot. Looks like you followed the middle section of the video and the fact that the 3D layer. It would never work. The normal procedure would be to add a camera and a null value or a solid or a text composition. Then the 3D layers will be stick to shooting perfectly if there is no significant lens distortion.

    Please explain in detail exactly what you're trying to do and if you don't ccreencaptures put it on YouTube using full HD will give us something we can see better. It would have helped if there was audio on your video explaining what you were trying to do.

    Please enter Tracker camera find help in the upper right of the AE and study up on the functioning of the tool.

  • [Android] Several problems with Acc.meter and camera

    Hello

    I did some tests on my Galaxy S on its sensors. Here is the code:

    import flash.sensors.Accelerometer;
    import flash.events.AccelerometerEvent;

    var acc:Accelerometer = new Accelerometer();
    acc.addEventListener (AccelerometerEvent.UPDATE, {Function

    accX.text = e.accelerationX;

    accY.text = e.accelerationY;

    accZ.text = e.accelerationZ;

    });

    Well, while this works fine in device central, with the sensor three showing 0 when the unit is always, when I install it in the device itself those are the default - -:

    0,0195 G x

    0,0195 G in Y

    1,0152 G to Z

    Does anyone have an explanation?

    Then, the second strange thing is on camera obj. Here is the code:

    import flash.media.Camera;
    import flash.media.Video;


    var: camera = Camera.getCamera ();
    var vid:Video = new Video (800, 480);
    vid.attachCamera (cam);
    addChild (vid);

    The displayed video is extremely slow, like 1-2 fps. Am I missing something?

    Thank you

    http://en.Wikipedia.org/wiki/G-Force#Measuring_g-force_using_an_accelerometer

    I think your camera problem is a bug, the fix that will be available in the next version of AIR. The problem should disappear when you switch your app and back into him.

  • Satellite L650-1EQ - black screen and overheating problems

    Hello

    I have a problem with my laptop Satellite L650-1EQ.
    A few days ago my laptop was overheated quite often.
    I would like to start playing a video game and the computer could actually turn off after 10 minutes of playing it.

    I realized that this was getting serious so I stopped using my computer to play games and I decided that I need to clean it. However, I was looking for online on how to clean up my computer and then my screen turns white!

    I didn't know what happened and was very scared.
    I turned off the computer.

    The next day I turned on the computer to see if it was good, and the screen was black however the laptop power light comes on and I hear the vents work.

    I turned on the computer and tried to start it again, and the computer started fine.
    The image appeared and the problems disappeared.
    But I knew that something bad was about to come so I took the laptop computer repair technician.

    I told her what happened.
    He has used the vacuum to "clean" the dust of the computer and told me to go back if the computer kept a overheating.

    I restarted the computer again when I came home, and after an hour and a half the computer screen turns white but I don't think that it overheated. : s

    I tried to start the computer and the screen is black, no picture, the only light on is the power one and I hear the vents work. I tried of transformed market but now it just stays as if it were now.

    I tried on another computer for solutions such as the battery and pressing the power button for 2 minutes and other things, but nothing has worked. I don't know what to do so I decided to create a thread to get answers: s

    Please help me, thank you!

    PS: I'm sorry for my English, I know that's not the best

    Hello

    This does not sound very good boyfriend. I'm afraid that there could be some sort of dysfunction material Mr. something like the problems of graphics card or motherboard issue.

    You can try plugging the external monitor to the laptop just to see if something would be visible on 2nd screen.
    But if nothing will appear on the 2nd monitor, I think that the chip of the graphics card died :(

    Of course, this is just my personal opinion and a laptop computer technician must check the laptop to know what part of the laptop could be faulty.

  • X 301 built-in camera problem

    The webcam on my x 301 refuses to work.

    Whenever I try to use it, there is no green light, and when a screenshot is taken, it appears all black.

    The work of micro / audio, but not the camera.

    I did everything I could to make it work, but nothing has worked yet.

    It appears in Device Manager and in the BIOS. Both appear and display properly installed.

    I tried Lenovo drivers and make them fall back to the generic Windows 7 device drivers.

    Neither work.

    Any ideas on how to solve this problem? Is there a service center of Lenovo can I send them? It is out of warranty, it's understandable.

    Thank you!

    You can try to reinstall the OS to see if it is software problem or not.

    But what you describe could be caused by the wiring problem.

    You can buy parts and fix yourself by following the manual of equipment (if you need to repair the Center then call Lenovo warranty, but it won't be cheap, like the $ 300 +).

    http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-70395

  • Camera problems of Smartphones from blackBerry after 8100 Firmware update to v4.5

    Hi all

    It is a known issue for me that I'm updating all the handsets of our work with the Blackberry firmware for the company that I work.

    After updating the firmware on multiple handsets to the latest version of the Blackberry 8100 4.5, there is a problem with the camera.

    When you are in display mode and the outside (even if covered) the screen turns white as if the lens opening is open wide.

    Even when you take the picture, the result is white all over.

    Please see examples here:

    http://www.imagedump.com/index.cgi?pick=get&TP=540100

    and

    http://www.imagedump.com/index.cgi?pick=get&TP=540101

    Two of these photos were taken inside with just on fluorescent lights.

    However if I return to the firmware to a lower level the problem no longer exists.

    I tried to change the settings for the White Balance on the handset and no matter what setting I put it on the same results occure.

    I was wondering if there is a patch or I have to wait the next release for a bug fix?

    Thank you for your help in advance.

    Gadget

    Updated the 4.5.0.55 combined software and the camera problem no longer exists.

    Can I get some laurels to solve the problem myself? Laughing out loud

    Gadget

  • New PPr upgrade and memory problems now

    I upgraded my version of PPr CC 2015 20 days ago and I went back to make a project that I had previously worked on and made more than 3 weeks. Now, it will not be made and the computer is just running out of memory and encoding is abandoned. I am on Windows 7 with a 2 years old i7 processor and have been able to use the first Pro CC 2015 without problem until the upgrade to the latest version that came out about 20 days ago. Are there bugs that are being developed here? Thanks for any info. I had the project made out by removing all effects to make sure it was a memory problem and quite sure the file render out with effects off the coast. However, I could make with effects on before this update.

    Thanks for you response Brian.

    Can you remove the effects of light and then give it a shot? Effects of light seem to be common with those who have reported this problem.

    Thank you

    Regalo

  • iPhone camera problems 7 iOS 10.02

    iPhone 7 128 g, - camera problems. My phone was working fine until I updated to iOS 10.2... now I can't get my camera

    work on snapchat or my regular camera, it's just a black screen. If she decides to work it freezes. I tried to force reboot, power on & off, check the updates and nothing has worked. Anyone else having these issues and have any successful resolution?

    Same thing here! Any suggestions?

  • Why Keynote warn the font GillSans light and "BOLD" missing?

    For several years now, I got an error of central point which is more one annoyance than other. And recently, I created a presentation that using one of the models of stock of Keynote (with Keynote 6.6.2, although I have experienced this problem with previous versions) and encountered the same error.

    My presentation was very simple, so I do not have any changes to the Slide Master. I used the showroom model.

    This model uses only the font Helvetica and which does not change during the preparation of my presentation. I've worked on Friday, saved (several times), then it opened Sunday to continue to work on that.

    When you open the presentation, I received a box of error dialog warning me that GillSans light and bold GillSans lacked. This scenario often occurs when I use Keynote, and it's the source of my boredom.

    What is causing this error appear? If a particular font GillSans, why this error pops up when opening it does not use a Keynote presentation?

    I use Suitcase Fusion to manage my fonts and keep GillSans essentially disabled, unless specifically, I want to use this font. Keynote intrinsically search and require the GillSans for any presentation, even if the presentation does not use the police?

    Thank you for your time.

    I think that all users have this problem.

    We, the users don't know how his cause and Apple don't give advice on errors in the software here.

    So the best advice is to choose her "Don't warn again" option in the warning message and do not think it's a fault with your file.

  • my mac book does not light and I get three beeps while it tries to start

    my mac book does not light and I get three beeps while it tries to start

    Three beeps is almost always a problem of memory RAM.

  • I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image.

    Hello...

    I wonder if you can help me with a problem with my desktop OS X El Capitan 10.11.4 various...

    I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image. There is no disk in my hard drive... I try to download again, but still the same message...

    Help, please...

    Much thanks

    Lisa

    < re-titled by host >

    The actual message means you need to move the mounted image - the small icon that is displayed after you double-click the .dmg - and put it in the trash.

    Where do you see the message your computer?

  • Lenovo Ideapad 11s Yoga camera problems

    Hi all

    My webcam integrated on my lenovo yoga idea seems to be malfuncitoning. When I try to open any device using applications, the screen is black without error message or visible problems. When I check in the Device Manager the device says all drivers are updated and it is in working condition. At all the world is facing this problem / solution without sending it to the computer for repairs? Any help you can offer me would be greatly appreciated.

    I tried many things / things that others have suggested and did not work:

    FN + esc

    Try in other applications outside the camera

    Check for driver problems Device Manager

    Updated drivers

    Turn off the camera

    Thanks in advance,
    Randall

    He always appears. I called Lenovo support and came to the conclusion that it is a problem with the camera while they are currently fixing. Thanks for your attempt.

Maybe you are looking for