G510 Windows 10 not recognized Bluetooth (resolved)

Similar Questions

• My program iTunes windows is not recognizing my iPhone more than 6 s

  I have installed ios 10 but my iPhone 6 s more is stuck in recovery mode and my iTunes account is not recognizing the device to complete the update or restore.

  The first thing to do is to make sure you are using iTunes 12.5.1, like this version, released on September 13, 2016, are the first to recognize and prepare for iOS 10 version.

  Next:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• For the first time Windows is not recognizing my Nook. Any suggestions on how to fix this?

  I downloaded books from my computer on my corner several times via Adobe Digital.  Today, Windows is not recognize as my Nook is connected to the computer.  The cord shows power at the end of the meal.

  Hi Nancy,.
   
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
  3 have you tried to connect the device on another computer?
   
  Method 1:
  Try to connect the device to a different USB port and check.
   
  Method 2:
  Run the fixit and follow the steps in the article:
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  Method 3:
  Check if it is detected in Device Manager. Follow the steps below:
  a. click on start
  b. click on Run
  c. in the open run, type devmgmt.msc and check if the device is detected.
   
  Method 4:
  Check if the problem persists in the boot.
  Reference:
  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"
  under more information to prepare the computer to start as usual after a repair.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Windows 7 not recognized as true after reinstalling on one machine virtual Parallels Desktop

  Hi all -

  I'm a Mac user running Windows 7 on my virtual machine (Parallels Desktop).  I did for years, even the upgrade to Windows 7 after using XP for a long time.
  Recently, I had a problem with the upgrade of Parallels Desktop, which could only be repaired by removing and then reinstalling the Virtual Machine Parallels.  This, of course, obliged me to reinstall all programs (including Windows 7).  Since I bought my Windows 7 and Office 2010 at Staples (Yes... not online or eBay copy here), I know that my copies are authentic and I used Winows 7 for the years leading up to this relocation.  I still have the original case, the disks and the sticker with the product key.  I used this key when I did the re-install and everything worked perfectly... until today when I turned on the virtual machine and he asked for me to enter the product key, say something (I'm sorry I didn't write that down) on the exhale.  I got my key, Windows 7 came out, but it is said that "this copy of Windows is not genuine" I get message "you can be a victim of software counterfeiting".  Once again... I bought full fare at Staples, so I do not know is not the case.
  Any suggestions?
  Thanks in advance for your help.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• After that the last windows update windows is not recognizing mynorton antivirus

  I did the recent update of windows on 16/10/12 and norton antivrus also updated.  I have 205 days remaining on my norton subscription; However, when I turned on my computer today windows Action Center prompted me that my firewall is configured incorrectly and windows does not recognize a virus on my computer.  My Norton is still listed as a program on my computer and I can access them from the menu programs.  Help, please.

  Hello

  Thanks for posting the question. I will help you find a solution about the Norton as antivirus programs. Before that, please answer a few questions in order to refine the question.
   
   
   
  1. What is the exact error message?
  2 do you have any other installed third-party antivirus program program Norton?
  3. to confirm, is Norton works properly after the update?
  Method 1: Perform the steps described in the article

  Report on the health system does not detect in Windows 7 antivirus programs

  http://support.Microsoft.com/kb/2482947

   
  
  Method 2:
  
   
  If Norton works very well and you still get an error message from Windows. I suggest you to refer to this article to disable the notification. If Norton displays an error message, just reply back to us.
  Use antivirus software that Windows doesn't find
  http://Windows.Microsoft.com/en-us/Windows7/use-antivirus-software-that-Windows-doesn ' t - search
  
  Method 3:
  If you have multiple antivirus programs installed on the computer other than Norton, please uninstall and check.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
   
   
  Hope this information helps. Response with status so that we can better help you.

• Windows 7 not recognizing network adapter

  Windows 7 works in Bootcamp and I am able to connect to the internet.  When I run Windows 7 in Fusion, Windows 7 does not recognize the network adapter.  I have tried both wireless and Ethernet, but unable to get online.  I also tried to load the driver through the Mac OS disk but back Windows do not see the correct network card driver here either.

  Thanks in advance.

  Take a look at the configuration of the Virtual Machine's .vmx file and make sure that the NIC is showing that "e1000" as follows example and if not add it.

  ethernet0.virtualDEV = "e1000"
  

  To get the location of the .vmx config file check out VMware Fusion A Beginner's Guide and or collect Information for VMware Fusion.

• WIndows 8 not recognized Microsoft Bluetooth enumerator

  I have a Lenovo Y510P and have the Microsoft Bluetooth Enumerator settled and says it's working properly according to my bluetooth. When I go to add my bluetooth mouse will not display even my mouse as a possibility of connection and said that my laptop needs troubleshooting because it lacks the driver Microsoft Bluetooth Enumerator. I tried the troubleshooting, and it comes up saying that the issue was not fixed.

  Hello

  Please contact Microsoft Community.

  This issue may be caused if the drivers are missing Bluetooth device you are trying to connect.

  To better help you, could you please confirm a number of things like:

  1. What were the changes made to the system prior to this issue?
  2. Do you have an error message while trying to connect Bluetooth?
  3. What is the brand and model of the device that are trying to access using Bluetooth?

  I suggest you follow the steps below and check if it helps.

  Method 1: Try the procedure described in the following Microsoft Help article and check.

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Method 2: you need to check if the Bluetooth Support service is activated or not, follow the steps below:

  1. Press Windows + R keys and choose RUN.
  2. Type services.msc in the box RUN
  3. Bluetooth support service search
  4. Double-click it and check the status
  5. If the service is not started
  6. Start the service.

  Method 3: You need to update the drivers from Windows Update, follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• Card not recognized Bluetooth SDIO

  Hello
  I try to use the Toshiba Bluetooth SD card with my Dell Axim X 3, which, according to Dell, supports SDIO cards. They sell a Socket SD Bluetooth card for this camera. The card does not seem to be recognized correctly by the Axim. When I press the icon of the Axim Bluetooth settings, I get the message "an internal processing error has occurred with the Discovery Mode setting. This isn't the same error when I press the settings icon and the card is not in place.
  This error message is "an error has occurred with the Bluetooth card. Check that the card is working properly", so I guess that the device knows the card is here.

  I downloaded and installed the latest drivers for Bluetooth on the Toshioba support site.
  Anyone with experience with this. Any help is appreciated.

  Hello jariser

  It is really not easy to give you a correct answer, but in my opinion, you must contact laptop producer because they give you a guarantee that the SDIO card is supported.

  I really put t believe that you will find here on the Toshiba forum someone with the same problem. Contact the producer of the laptop or your local dealer.

  Good luck and I hope you will solve your problem successfully.

  Good bye

• g510 windows 7 64 x Bluetooth problem

  Hi I have a problem with lenovo, g510 product 59433297 computer does not see the phone, the phone can't see computer. information, please, this is a bluetooth model to download drivers? the drivers from the websitenovo
  

  Your Bluetooth radio is turned on? You may need to look in your BIOS to make sure.

• Reinstalled Windows - can not find Bluetooth

  Heya,

  I want 7200 dv6t Quad Edition laptop and I recently installed Windows 8.1.

  I can't find how to turn on bluetooth. Some things I can reduce to:

  (1) I'm sure that this model comes with bluetooth (I think I remember using before, but not 100% sure).

  I can't get the page of the form of this product, but I bought it directly from the HP site so if anyone finds the plug page would be great.

  (2) I downloaded and installed the Qualcomm Atheros Bluetooth driver and Ralink software Bluetooth driver I found on the HP website Support & downloads.

  (3) I have not any mention of bluetooth in my device (generic or otherwise) Manager. Since the first appearance it seems I don't have bluetooth on my laptop, but again, I'm sure I have.

  (4) I tried following this subject and this subject also

  Attached screenshots that might help.

  

  You are the very welcome.

  The Ralink RT5390R 802.11bgn 1 x 1 Wi - Fi adapter is not a card without wireless/bluetooth combination, so your specific build does not have built in bluetooth.

  If you want to change the card to one that has bluetooth wireless, you can get one of these...

  670290 001

  Intel Centrino Wireless-N 2230

  690019 001

  Atheros AR9565 1 x 1 WiFi + Bluetooth 4.0 802.11b/g/n adapter combination

  690020 001

  RALink RT3290LE 1 x 1 802.11b/g/n WiFi and Bluetooth 4.0 adapter combination

• Windows 7 not recognizing wireless Micro JBL speaker.

  Original title: the JBL Micro speakers wireless

  Hello! I had a speaker JBL Micro Wireless. Unfortunately I can't log into Bluetooth mode. My PC find the speaker but may not recognise. When looking for a driver, it can not find. Someone of you has solved this problem please? I use Winfows 7.

  I had the same problem, but now its resolved, try to update your win7

  before that, I had problem to connect via bluetooth with my hp pavilion for jbl wireless microphone,

  its can detect but can not to connect/play music,.

  and after updating my win7 its ok now :-)

• Windows 7 not recognizing memory sticks in slots USB

  Hi when I put the memory stick to any USB on the computer, I receive a message first came to ask me to format the memory stick. I even get this if I enclose my TomTom GPS on the same USB slot.   If I click on the drive designation, I get the following message:

  {{K:drive is not accessible. The volume does not contain a recognized file system. Make sure that all required file system drives are loaded and that the volume is not corrupted.}}

  I know that the sticks of memory are OK, as I have tried several and also tried all the USB slots on the computer and another computer.

  I don't remember doing anything for having caused the problem since the last using the disks of the USP.

  Using windows 7 Home premium.

  Anyone know what is the problem and how to fix it please?

  Concerning

  Windows7RULES

  Finally, I used a data recovery program.  Recover all files and files downloaded from the sticks of memory on my hard drive.  Formatted in NTFS and I am now able to use chopsticks as well as my recovered data, the sticks of memory.

  All sorted

  Concerning

• Windows 10 not recognized as being superior to 7

  I have an iMac, retina.

  

  I'm trying to bootcamp Windows 10. Bootcamp Assistant does not like being a newer version than 7. He says that he cannot find an installer, although there is a bootable USB key, it made my Windows 10 DVD Installer. There is also an ISO on the desktop.

  I had to do in bash bootable installation disk using dd, because the disk Util and Bootcamp Assistant kept throwing errors when I tried to stick it to their use and ISO installed I downloaded from Microsoft, in accordance with the instructions from Apple. I keep looking for help and Advisor tells me that these problems do not occur, then two, that some people actually manage to do it without all the pain I feel. If those who have also had difficulties could share their solutions would be great

  

  

  Remove all the drives external, other than your USB2 flash drive. The ISO W10 must not be mounted.

  Please perform the following two procedures, before your next attempt to install W10.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If you downloaded the ISO W10 via a wireless connection, check the size and MD5sum of the ISO.

  LS - lgh Win10_1607_English_x64.iso

  -rw - r - r-@ 1 staff 4.1 G 17 Jul 17:28 Win10_1607_English_x64.iso

  OpenSSL md5 Win10_1607_English_x64.iso

  MD5 (Win10_1607_English_x64. ISO) = 88b98698600511dcd69596df92b242e5

  If you are using an ISO, display the name of the file and the MD5sum.

• Qosmio G20: small CD not recognized & Bluetooth stack has disappeared

  Is in any way I can use the CD-ROM more little ones who are provided with some hardware that contains the drivers. I just bought a webcam and the cd is the mini version. I tried to insert it central or left or right, slightly but this is not regocnise it.

  Recently, I noticed that my Bluetooth stack was gone so I have to use a dongle to connect the phones or camera to my machine, any advice please.

  Concerning
  Michelle

  Hello

  I think that you can not use the small media CD because the player on the Qosmio doesn t have the small deposit as long as other portable players who ejecting.
  It s very silly situation, I don't know :(

  I think that the only way to use this little CD data is to use this CD on the other computer, and then you can copy the files on the USB key.

  Toshiba Bluetooth stack, you can download from Toshiba site:
  http://APS.toshiba-tro.de/Bluetooth/

  Good luck

• Windows Vista not recognizing the USB 2 TRPPLITE port device

  Having a desktop computer running Vista that says it needs a driver to recognize my port switch 2 TRIPP-LITE my Netbook running windows 7 starter edition had no problem? Help pleasei

  Win 7 probably has a built-in function that Vista does not work.  You can look here to find the right one for your system.